Removing BT Talk from BT Voyager 220v

Hi,
does anyone know how to remove BT Broadband Talk from the BT Voyager 220v Router, I received instructions with a link in an email from BT but the link did not work.
I found instructions for a home hub, but not the voyager, can anyone help me out.
I am told removing the facilty assists with bandwidth speed.
Thanks
Tonibell

1tonibell wrote:
Hi,
does anyone know how to remove BT Broadband Talk from the BT Voyager 220v Router, I received instructions with a link in an email from BT but the link did not work.
I found instructions for a home hub, but not the voyager, can anyone help me out.
I am told removing the facilty assists with bandwidth speed.
Thanks
Tonibell
A factory reset will remove it, but it does not take any bandwidth unless you are on a call, and then its is only a very small amount.
Do you have a speed problem?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

How to remove a device from my plan

I would like to remove a device from my Share Everything plan and lower my monthly bill. How do I go about this?

Its simple. Verizon specifically does not want customers removing devices by themselves because they want to get you on the phone and try to talk you out of it.
I actually stopped by a Verizon store to have my tablet taken off my plan, and the ONE person they have that is authorized to do terminations wasnt in the store so they couldnt do it.
I am a little annoyed to say the least.

How do you remove a picture from a theme?

Hi all gurus.
This must be the most silly question so far in the forum but I have to ask again: How do you remove a picture from a theme?
I uploaded a background picture for the Masthead Function Area but now I want to remove it. Since the correspodning field is blank when you go into the editor you can't erase the picture's URL
What you can do is to browse to, and choose, a new picture and then erase the URL in the field. The mentioned area is then actually emptied and the color set in the field "Background Color of Masthead Function" is shown.
But, and here is the problem, when you save the theme the picture is back again! Isn't there the possibility to show the background color, for which there is a field, instead of a picture? Do I really have to upload a picture just containing the color I want to have??? If so, that must be one of the most stupid functionaliteis I have seen in the portal so far, indeed...
I'm most grateful for every suggestion of how to solve this in a decent way and not the idiotic "replace picture with another picture" way.
Best regards
Benny

Hi Raghu.
Unfortunately it didn't help. Their solution with writing "none" in the field is only applicable for those objects where you have a field determening ways of showing the object. There you have the different behaviours like "repeat", "non-repeat" and "none" and there you can write it directly in the field.
The field of which I am talking doesn't have these options and hence not "none". I still tried it though but it didn't work, the picture was back after saving the theme.
Best regards
Benny

Is there any way to remove the duration from the course outline in Presenter 8?

Is there any way to remove the duration from the course outline in Presenter 8? I would prefer to not have that listed if at all posible and can't find a solution.

Are you talking about the Time Remaining display on the side bar? The text for that field is in the Modify Text Labels... tool in the Theme Editor of Presenter. You can change it to whatever you want, but you may want to keep a record of what the default text labels are, as there is no restore to default option. The Elapsed Time field is what you would want to change. I have seen this modified to show no text, copyright information or other general info.

How do i remove a word from spell check in OS X 10.4?

Hi all, I accidentally added a misspelled word to the spell check dictionary and i was wondering how to remove it.
I noticed there were already a few similar questions, but i could not get their solutions to work, as they were obviously using a new version of OS X.
So does anyone know how to remove a word from from spell check in OS x 10.4? or else how to reset the spell check?
Cheers.

OK, if you are talking about the Apple spell checker, do the following:
Open an application like TextEdit. Right click in the application window and you will get a popup. Select Spelling and then Spelling... to get a Spelling Dialog Box.
Type in the mis-spelled word in the text box and then click the Forget button. That should undo the mischief.

Voyager 220v Router - How to connect 2nd. computer...

I have already installed the USB drivers from the setup CD and my main computer is successfully connected via the USB port on the 220v Router.
I now want to add a laptop and I understand that this can just be directly connected using the Ethernet cable without needing to install anything else. So the setup CD does not need to be inserted in the drive.
Is this correct?
Can I insert the Ethernet plug in the router socket without having to switch the router off?

Thanks John.
Just one query arises from your answer though. You say connect both by ethernet for better connection but the Voyager 220v only has one USB port and one Ethernet port.
On the BT Business Forums someone asked the same question and a BT Employee said to use the other computer connected to the other port.
BT Business Forum
The other computer I want to connect to the ethernet port will be in the region of 10 to 15 metres away using an extension lead with coupler so that will have to be on the ethernet port anyway to avoid loss of signal.

How do I remove an app from "Updates" tab

So here is the rub, I installed the free 1.69v of DropCopy on my MacBookPro by mistake. I am already a Multi-License user. How do I remove an app from "Updates" tab, in the App Store? When i tried to use it it reverts back to the free version.
Thought I wold start here first then talk with 10base-t next.
Ty, BC

Hi,
The v10.6.7 "combo" update addresses MAS bugs. You can download and install from this link.
http://support.apple.com/kb/DL1361
Restart your Mac after the update is installed. It's ok to do this even if you are already running v10.6.7.

Removing live nodes from cluster view.

Hi All,
          We are experiencing some JMS problems connected with a cluster node being
          hung for some time.
          The following took place just before the problem arises:
          1. First of all one of the nodes (the first) gets one thread
          (weblogic.jms.backend.BEPushRequestSender@76512c) stuck.
          2. After that it closes the TCP connection to another node and
          3. Removes another node from its cluster view.(that is alive)
          4. After that the second node removes the first from its cluster
          view.
          5. Seconds later they find each other again and add each other to the
          cluster view.
          6. After that, the JMS distributed members are connected to each other,
          7. Something strange happens, because either the first node starts
          missing many messages in its distributed topic member or the second
          node doesn't propagate messages from distributed topic to the first
          node.
          Is it possible to set up weblogic cluster in a way, it won't remove
          other members from cluster view by peer gone exception, only by
          heartbeat timeout? Is heartbeat retry time parameter is configurable?
          Any help with this matter will be greatly appreciated.
          Dmitry Finkelstein


You must run the update node list for each ORACLE_HOME on that machine. If this is RAC, the runInstaller will take care to update all nodes, so again, you run it once per ORACLE_HOME installed.
Shared Home is a single copy of the Oracle software, rather than each node holding their own copy of the software. There's a paper that talks about these two topics and gives some examples of full commands on OTN:
http://www.oracle.com/technology/products/database/clustering/index.html
"Oracle Homes in an Oracle Real Application Clusters Environment(PDF) January 2008"
direct link: http://www.oracle.com/technology/products/database/clustering/pdf/oh_rac.pdf
Enjoy and hope this helps.
Saar.

How to remove effect presets from a clip?

I'm learning how to use Premiere Elements 8 from Adobe's official Help document.
I'm currently working through Chapter 10, "Applying effects", section "Working with effect presets" -> "Apply an effect preset".
The Help document doesn't tell how to remove an effect preset you had applied.
I've tried to follow the instructions for removing regular effects, but they don't seem to work in the case of presets.
How can i remove effect presets from a clip?

I suspect it's actually a standard PE terminology that i'd better get acquainted with.
I wanted to address this part separately. Actually, "workflow" is more of a video, or at least NLE term, and is not specific to PrE.
As for terminology, this ARTICLE might prove useful.
As I attempt to point out, some of these terms might be applied slightly differently, depending on the exact program used. As a for instance, PrE 8 has moved all of the Export options to Share. I still write "Export/Share" in case a PrE 2 through 7 user reads it. Terms can change. Also, Avid might call one common operation by one name, and Final Cut Pro use a different one.
For me, I had to learn some new terms. I can from a film background. Terms were changed with video. For instance, my old Fade-to-Black is now Dip-to-Black in most NLE's. First time that I typed Fade-to-Black, everyone came back with "huh???"
I read a lot of books on general editing of both video and audio. Some authors use different programs, and though the core theories are the same, their terminology can be rooted in their program of choice.
Also, with regards to audio, many still use a lot of the terminology from the analog days, and keep them, because analog is still part of the workflow in most productions - think of the mics, for instance. There is generally less analog left in video, unless someone needs to telecine film to digital, or transfer VHS tapes to digital. More of the total workflow is all in digital, so my old film school terms have faded.
One of the things that I attempt to do is differentiate exaclty what I am talking about. If I type video, I mean video in general. If I type Video, I am talking about the video Assets in a Project. Notice that Assets is also capatilized, as that is a term from the NLE and is specific to all things, SFX, Video, Audio, etc. used. Sometimes I slip up. I use project to mean the whole thing, and Project to mean the setup in the NLE, that will result in either a .PREL, or .PRPROJ file from my Adobe editors. Does this make sense?
Good luck,
Hunt

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

How do I remove extra profiles from color mangement in Print Module?

How do I remove extra profiles from color mangement in Print Module?

If you're talking about the "short list" then click on other and then uncheck the ones that you don't want displayed. If you're talking about the long list, then you will have to browse to the folder containing the profiles and then delete them manually.

Is there a charge to remove a line from my plan?

I have several lines on my current wireless plan. Will there be a charge to remove any of those lines and if so, how much is the fee?

KWildman, the more, the merrier! Why would you want to remove a line from your account? Let's talk about this.
When accepting a two year agreement, each line has it's own contract end date. If you cancel services prior to the contract end date, then you will be billed an Early Termination Fee. This fee varies based on the device that you upgraded to and amount of months that you've completed on that contract. For more information regarding your customer agreement and how the Early Termination Fee is calculated, click http://bit.ly/17srsZb
Lasina_VZW
VZW Support
Follow us on Twitter @VZWSupport

Remove the article from assortment in SAP IS-Retail

Hi,
i want to remove the articles from the assortment. not from the system. so kindly provide the guidance regarding that issue.
thanks in advance

Hi Sune
The thread you are refering to is quite old, there is a solution available now for doing retail master data governance on SAP MDG. This is offered as a consulting solution now.
The data model itself is modelled after the IS Retail data model for Article master and would leverage on the data governance capabilites offered by the MDG framework.
It is not exactly a supplier portal for data exchange but there have been architecture discussions on using a 'lean' version of the data model as a vendor facing portal and seperating this from internal facing MDG for enriching the ERP specific parts of the article master data , before governing and commiting to the ERP system.
If you are interested in talking more about it would be happy to do so.
Regards
Dilip

Can Logic plug ins remove background noise from interview?

Can Logic plug ins remove background noise from interview?
A friend with an important interview recorded in noisy conditions has asked me to help remove background noise - never done this technically.
Is there a Logic or third party plug in that would could remove background noise from a spoken word interview? Have tried EQ which improves the sound slightly but not a solution.
Anyone with specialised knowledge of this sound editing operation?
cheers
MS

There are several 3rd party denoisers, they mostly work by first 'learning' the noise footprint of the audio, for which it is best to record a few seconds of silence (with an open mic).
These will all do a decent to excellent (it all depends on the source material) job:
http://www.kvraudio.com/get/3199.html
http://www.kvraudio.com/get/2104.html
http://www.kvraudio.com/get/2791.html
http://www.kvraudio.com/get/1182.html
http://www.kvraudio.com/get/1029.html
Addit:
Is it that background noise (traffic, talking etc) drowns out the words? Then you'd probably have more luck with (radical) eq-ing and/or notch filtering to find the most dominant frequency range of the speaker in relation to the background noise.
As an interviewer myself I will point out that even with a small disctaphone you need to have some awareness of how the microphone picks up things. As soon as you nead to lean towards whoever you're talking to, just to make sure you're audible, the dictaphone on the table is probably recording mainly ambient noise, the interview being part of that. This is especially a problem when interviewing in a busy public space.

Remove preceding zeroes from an integer number

How can i remove preceding zeroes from and integer number.
Please help...

what are you talking about? How can an int not have preceding zeros?

Removing BT Talk from BT Voyager 220v

Similar Messages

Maybe you are looking for