Removing default Metadata set

I am creating very specific metadata fields, groups and sets for one of our clients. however, i cannot seem to delete the custom Metadata Sets, for example: 'Show' has no relevance to us, but I can create new sets fine. Please if anyone knows how to do this or know a good workaround, any help will be much appreciated.
thanks

Sure, FCSvr is highly customisable.
Having the default metadata there gives one options, you don't have to use it all. Only the admin should ever see it if setup correctly. You see it, ignore it and move on.
Or, I may be misunderstanding your question. Are the end users seeing a field you don't want them to?
I know you can delete certain fields - but backup your database first.
Even deleting a seemingly useless (to some deployments) metadata group such as Documents, can totally wreck the database.
You can install a custom metadata set which will require a lot of work to build from scratch. If you do want to go that route it will take many man hours to construct database fields, lookups, sets, etc.
Good luck.

Similar Messages

Remove default export setting from media encoder... or allow mass deletion

Every time I drag media into AME, it pulls up the most recent setting, or maybe a default I have set somewhere, and applies it to my entire import.
I cant figure out how to "mass swap" with my desired setting, so i end up deleting 12 or 13 settings, one by one, and applying my desired settings.
Can I remove ALL defaults, so I can just drag what I want... OR is there a better way to remove all preexisting settings and replace them with my own?

Your image is still queued so I cannot see it but yes there are tiny black bars on the left and right sides of the screen. This is probably due to some round off errors in the PAR (Pixel Aspect Ratio). I think I read that Adobe made some corrections from previous versions that ended up distorting the image

How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
Can it be possible to edit a mozilla.cfg file to get the same result?
Thank you in advance for help and tips.

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

G6: Setting default metadata values

Hello all!I am trying to find a way to set default metadata values in plumtree.
For example, if I created a Web Content Crawler to scan MarchofDimes.com, which has various career postings, I would like to be able to default or force these crawled content items to have a category field of "Job Postings".
It appears that at the "Content Type" object level, you can set a default value. However I don't want to set "Job Postings" as the category for all imported web content, only those imported through this particular crawler.
I tried to create a new Content Type called "Web Content - Job Postings" but I chickend out when it got down to setting a new identifier to map to the Content Type. I wasn't sure how that would be accepted in the Global Content Mime/File Type Map Utility if there were duplicate identifiers.
Apart from going into each crawled document and setting the category field manually, does anyone have a recommendation on how this can be done?Thanks!Geoff!
While I have your attention, in the Global Document Property Map, how can I identify the various Document Attributes?

Hello all!I am trying to find a way to set default metadata values in plumtree.
For example, if I created a Web Content Crawler to scan MarchofDimes.com, which has various career postings, I would like to be able to default or force these crawled content items to have a category field of "Job Postings".
It appears that at the "Content Type" object level, you can set a default value. However I don't want to set "Job Postings" as the category for all imported web content, only those imported through this particular crawler.
I tried to create a new Content Type called "Web Content - Job Postings" but I chickend out when it got down to setting a new identifier to map to the Content Type. I wasn't sure how that would be accepted in the Global Content Mime/File Type Map Utility if there were duplicate identifiers.
Apart from going into each crawled document and setting the category field manually, does anyone have a recommendation on how this can be done?Thanks!Geoff!
While I have your attention, in the Global Document Property Map, how can I identify the various Document Attributes?

Metadata Sets... can I edit?

Is there a way to add/edit the list of Metadata Sets? Not presets, but the sets that come pre-defined. I want to add an extra field and maybe remove a few others. "Default" is close to what I want, but not close enough.
Thanks,
DS

The Metadata-Viewer Preset Editor plugin makes it easy to construct new custom metadata tagsets. If you're technically minded, you can download the LR SDK, and there's a section in the documentation that explains how to edit the config files yourself. (But expect to spend at least an hour or two climbing up the learning curve.)

Reader 9.3.3 Removing default printer - says no printer installed

I have over 50 users with Adobe Reader 9.3.3 installed. Every morning someone calls and says Adobe Reader reported that there are no printers installed on their system. When I check their PC I find that the default printer setting has been removed and there is no default printer set. Once reset they have no problems with the printers or their other applications. This only happens when trying to print a PDF.
Why is Adobe Reader removing the default printer setting?

The driver has NOT been removed. Just the default setting.
In very PLAIN English the default printer check mark is GONE.

Preview Default Print Setting "Fit to Page" Problem

Preview.app in Snow Leopard has removed the option to print without scaling, and recreating this behaviour with the remaining options is quite complex and requires 4 extra steps.
Steps to Reproduce:
1. Open a document in Preview.app, such as a PDF, of a known paper size.
2. Select 'File' > 'Print…'
3. Change the paper size to one where the default scale value with the default 'Scale to Fit:' 'Print Entire Image' is not 100%. This step is often unnecessary, as many documents will require reduction to include margins, even if the paper sizes match.
4. Select 'Scale:'
5. Select the scale % value.
6. Delete the scale value.
7. Input '100' in the scale value box using the keyboard.
8. Press tab to avoid radar #7256827.
9. Click 'Print'
Expected Results:
Click on a single option to print at 100%, if by chance that wasn't the default option. This would have been one step.
Actual Results:
Does what it says. Steps 4 through 8 are necessary to print at 100% in most cases.
Regression:
This behaviour was as expected in OS X 10.5.x and previous versions, or we wouldn't be having this discussion.
Notes:
Printing at 100% is the only scaling that is common enough to warrant a button to make it an easy one to get to. Preview.app itself even has an 'Actual Size' toolbar button, but has removed this function for printing.
Graphic designers (and other professionals) or specific applications (such as printing on pre-cut or pre-printed paper, labels, or DVDs) can commonly require printing at 100%, and using PDF to distribute documents makes Preview.app the most logical choice for many printing jobs.
Having something other than 100% as a default can cause expensive media to be ruined by a mis-scaled printout, unless these 4 (+1) steps are followed every time.
Most other apps, including Safari, Mail.app and TextEdit default to no scaling, making Preview.app an exception.
I am an architect and this is really annoying!
Does anyone know a workaround?

Sorry no workaround as yet...
I too am now sick of the amount of expensive paper I have wasted due to the Preview app default print setting of 'Scale to fit'.
- No option to print at 100%, you have to manually input this information.
- No way to change this default in preferences, you can change the opening viewing size of a doc to 100% though.
- Doesn't remember the previous settings if you decide to reopen the doc and print another copy.
I also found that if I attempted to print an A4 doc with bleed and crop marks, it would set the default paper size to A4 and the annoying scale to fit would be set to 83%. If I then changed the scale by typing in 100% but don't hit enter for fear of the print starting and then simply use the drop down to change the paper to A3 and then change the orientation and then hit enter it ignores that you have changed the scale and prints your doc at 83% on A3 - Brilliant!
It's a shame to say that I will be going back to acrobat for pdfs!
If you can't put a 100% scale radio button on the print dialogue box either allow people to change the default in prefs or even better allow the presets to control paper size and scale of printing!

Metadata set, how did I do it?

It's two years since I created a Metadata Set called Feb 07 and now I can't remember how I did it.
Library module, Metadata panel, just to the left of the title word "Metadata" is the small panel containing Default, All, EXIF and so on and there is my very own "Feb 07". Can anyone remind me how I did it please?
Too many years and not enough coffee...
David

Maybe with Jeffrey Friedl's metadata set editor?

Eliminating excessive dhcpcd add/remove default route messages

I've been on an IPv6 network for the past several months. I use no network manager (aside from netctl and wifi-menu) and I'm generally wired in. I manually start dhcpcd on my eth0 when I start my computer.
The issue I've been having and have been unable to resolve is the fact that the following two messages have been repeating in my log every 2-10 seconds for the past several months and I now have several thousand of them. It's just getting annoying at this point because it interferes with actually reading relevant log messages via journalctl:
Mar 22 10:45:56 kcuzner-desktop dhcpcd[1109]: eth0: adding default route via fe80::fa8f:caff:fe2d:b464
Mar 22 10:45:56 kcuzner-desktop dhcpcd[1109]: eth0: removing default route via fe80::fa8f:caff:fe2d:b464
No matter what I search, I can't seem to find a way to get rid of these. I keep a terminal open with journalctl -f running almost always and it's just filled with these, quickly pushing away relevant messages such as "codeblocks dumped core". Does anyone have any tips for preventing these sorts of log entries?
Last edited by Los Frijoles (2015-03-22 18:27:41)

I don't think there is a way for journalctl to exclude logging from only dhcpcd. Of course, you can filter the real time logging to the group of units that you do want to watch but I think you want to watch everything else, right?
How about trying systemd-networkd rather than dhcpcd? Or, if you are only concerned about certain priority level messages, set the priority level. If everything you want to monitor is priority 4 and below for example, and if this message priority is 6, then you're all set.
Last edited by nullified (2015-03-22 19:43:59)

Problems with Metadata Set and video clip size... I think....

Ok, I can't figure this one out... any help would be much appreciated.
Background:
I started server using the Video Production default customer profile. Then I created a few new metadata Sets including one called Finished Programs which is a media asset.
Problem:
When I upload a video clip and select the Finished Programs metadata set it always changes to the Media metadata set. Now this only happens when I have used MPEG Streamclip to take the video off of a DVD. If I upload a clip (mov) file that I used in Final Cut Pro it works fine.
My settings in MPEG StreamClip are Apple DV/DVCPRO-NTSC 720x480 Interlaced Scaling and Reinterlaced Chroma.
If I upload two clips at the same time and select Finished Programs metadata set, one that I used MPEG StreamClip and one that I digitized into FCP, it will place two clips in FCPserver, one with the Finished Programs and one with the Media Set.
Any ideas on how to fix this????

Could be. If it's not the metadata it must be something else. You would have to figure it out by trial and error. Maybe you should try giving it the highest priority and maybe turn off all automated scans and see if it works then. just to make sure that nothing intervenes with the process while it is going on and see if you can get it to run fully and see what the outcome is then.
I have files over 1 GB that get attached to the right medadataset. I have failures on thumbnail creation to, but FCSvr then starts the same job over and over till it succeeds.
I have never user MPEG Streamclip clips in FCSvr. Hopefully somebody else has and could share their experiences.

How to Remove a Library Set?

How can you remove a newly created library set?
The "delete set" is grey.

Installed Library sets can't be deleted from the Library- only custom sets. Same with content within the default installed sets.
Instead, delete these in Windows Explorer.

Need to remove default dock menu item and add new.

Hi ,
I am working on Carbon application on Xcode . I need to remove default menu item attached to my application dock menu like ( Remove from Dock , Open at Login , Show in Finder ).
I also need to attach new items to my application dock menu and want to handle its event.
Thanks in advance,
Sunil Adhyaru.

Well, this is a programming question more than a question on how to use the Leopard environment (you might want to post to one to the programming forums).
However, basically, you can't remove the Dock menu items that the Dock itself adds (add/remove from dock, etc.). You can add your own menu items, however. Use the interface builder to create a nib that has a menu in it -- call it something catchy like MyMenu.nib.
Then in the application property list file (Info.plist) add property called "AppleDockMenu" and set the value to a string that's the name of your nib file (without the .nib extension).
Subsequently, you treat that menu just as you would the menus in your menu bar. That's all there is to it.

Oracle Inventory: How to change default category set of items

Hi,
We have a requirement where we need to change the default category set of functional area inventory in oracle as we are importing new items into inventory whihc need to be assigned to a new default category set.There is an existing default categpory set for this area.
As far as i understand once a default category has been set up and an item has been defined, the only way to change the default category set for a given functional area is to update all items with the new default category set before updating the default category set/functional area relationship.
How exactly do we update the defaul category set for an existing item and change it to a new one. Since we have close to 15K items what is the best way to do this.Is there ay API available?
Thanks in Advance
AM

Hi Helios,
Thanks a lot for your response
The fix given in this document is to allign all the exisitng items to a category set (purchasing in this case). This is exactly what my doubt is. How to assign 15k items to a different category set. If i am able to allign these items i can change the default category of the functional area.
Thnaks
AM
PS: i am using 11.5.10.2

List View Web Part - Default Chrome Setting

In our environment, the "Default" chrome setting does not display the title or the border on our list view pages. We have tried Oslo and Seattle master pages and neither displays this to the end user. We do see the title in Edit mode, but
not once the page is saved. If we switch it to Title Only, it does display.
Is this the correct behavior? If so, is there an easy way to change the chrome setting to "Title Only" for the list view web parts in one particular web application when a view is created?

That is the default behavior. normally, the listview web part is on a page where the title of the library is displayed on the page, which would make it redundant to display it in the web part only. I don't know any way to change this behavior
by default when creating a new view.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Default User setting at Dashboard level

Hi SAP Users,
i want default dashboard user setting & all users will only see my setting
Is it possible to have default user setting for dashboard?
Regards
Ravindra

In the administration mode, you can update the current configuration settings/layout (right-click on the UI group you want to update, can be a dashboard, a field...) and save them as the default (standard) settings.
Please try with the administration url I provided you with, and let me know if it helps.
http://server:port/irj/portal?sap/bc/webdynpro/sap/cprojects?sap-config-mode='X'
Matthias

Removing default Metadata set

Similar Messages

Maybe you are looking for