Removing dust spots - automatically / batch job

I have just taken a 1000 shot series of images for a timelapse sequence. They all have a dust spot on them which is particularly annoying as I cleaned the sensor and thought it had been cleared!
Anyway, is there a way of batching a spot removal? Can I remove it on one, and then copy Develop Settings or Sync across the rest?
Advice here please

Have you tried? If you had you would see the ability to include Spot Removal when syncing images...it will apply the healing spots from the most selected images to all other images selected when syncing.

Similar Messages

Automatic batch job processing

Hi all,
I'm using a customized abap program to update data in one of the Controlling table. This abap prg is scheduled background to run twice daily.
This program will generates batch job in sm35 and i have to manually process it so that the data in CO table will be updated.
Could anybody tell me where should i configure so that the batch job in sm35 process automatically instead of process it manually.a

Hello Suhana
Check this link
http://help.sap.com/erp2005_ehp_02/helpdata/en/2d/351b15448c11d189420000e829fbbd/frameset.htm
Reg
*assign points if useful

Two Deliveries did not go through Batch Job Runing

Hi,
In this company every evening the automatic batch Job for Billing due list is run but on Nov 23 one Deliver and on Nov 30 another delivery has not gone through i.e. the invoices were not created for these two deliveries.
I checked in VF01, the individual invoice is being created. The user is asking the reason for this and how to prevent this type of situation in future.
I don't know the Batch Job number and I think it has been done in VF06.
Please guide me how I can solve this issue.
Thanks,
Jans

Hello Tushar,
Thank you for your reply. I don't know the Variant name also and I don't know the Batch Job number eirther. The user is not aware of these things. I tried to find out from VF06 but I could not figure out anything.
Please explain me your sentece "Execute billing program in foreground and check". you mean to say after creating the same scenario in the quality, I will run the Billing program ( I will take the Billing program from the VF01). If I am correct please let me know.
Regarding debugging, if I have to do how I can do it. I know to go to Debuggiing mode if I put in the command field "/h" , I will be in the debugging mode. But my question is which transaction Should I use VL02N or VF01 to find out the Problem
I have mentioned earlier that I went to VF01 and these deliveries are fine to create invoices but the User is interested to know the Problem and to find out the cause so that they can prevent it occuring in future.
Thanks,
Jans

Erasing dust spots

besides the spot and patch tool, is there any other way to remove dust spots from images in Aperture (or iPhoto)? i recall seeing a demo of Nikon's Capture NX, and that program had a feature that let you shoot an image of a white background, and then you could use that image to identify where dust spots were and use that to remove the dust spots from images.
i have not found anything in Aperture that does this, and the spot and patch tool is a little harder to use than the touch up tool in iPhoto.
have some nice shots of a sunrise on mountain, but unknown to me at the time, i had a big dust spot right in the middle of the mountain. using the touchup tool in iPhoto just results in the nice detail of the mountain getting all fuzzy.

thanks, that's what i was afraid of.
spent extra $ to get Aperture, thinking it would be more useful than iPhoto, and figured Aperture would be as useful as Capture NX from Nikon. if i had known all this, i would have thought twice about spending extra $ for Aperture.
don't have photoshop, no idea how to use it.
and the kicker is, by the time i discovered i had a huge dust spot on my CCD, and could get a white background to shoot, the dust spot had moved/disappeared.
guess my nice shot of the Tetons at sunrise will have a little blemish.

How to get batch job o/p in PDF format and automatically saved to xyz loc

Hi Experts,
Our requirement is we want output of background job in PDF format and this PDF generated should be saved in some xyz path at OS level.
Why doing this?: Business don't want hard copy o/p of some batch jobs but only want to save this output in pdf format to some OS location for future use.
We could achieve above objective by archiving method (but for some reason we cant adopt it).
So guys please propose solution in detail regarding above problem "how to get o/p in PDF format and automatically get saved to xyz location"
System : 4.0B
OS : Windows NT
Database : Oracle
Thanks in advance

Hi guys,
Thanks guys for your invaluable advise.I asked abaper to use the above report for pdf conversion. But I have another problem that o/p of batch job should come in japanese language but when i check spool or hard copy o/p its not coming in readable form (seems something like machine language) . I dont what is the reason there must be some basis setting to get the batch job o/p in japanese language.
Please help me.
thank you

Setup F110 as an automatic nightly batch job

Hello Gurus,
Can anyone please tell me how do I set up the F110 payment batch job as an automatic nightly batch job. I tried doing it in sm36 but I dont think so it would work because i was not able to create the parameters

Hi, you should use transaction F110S or program RFF110S

Dust spot removal iphoto08

Hi
Can anyone tell me if they are having the same problem as me ?
In iphoto select edit, the picture in question has a few dust spots at the edge , im trying to remove
them using the retouch tool, it cannot be done.
the retouch tool workes in such a way that it needs to be able to have access to the complete circumference of the object to be removed.
this can be quite a pain you have two choices crop it out, or load the image into another edit tool
and back to iphoto.
i have a trial version of aperture on my mac at the moment this app does not suffer with this problem.

frostymfx:
Welcome to the Apple Discussions. Have you tried enlarging the photo with the slider and then use a very small retouch size and drag or "dab" it along the edge like this? Granted, not as easy as if located further from the edge.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Remove automatic print job photosmart 6515

My printer is printing Disney coloring sheets daily and I can't get it to stop. I've tried following the directions online for canceling and removing automatic print jobs, but I always get a "Server Networ Error" on my browser. If I click on the Apps icon on my printer, I get "Server Connection Error: -1" I have tried unplugging and restarting the printer. I have tried changing the manual DNS server. Any other ideas? I'm very frustrated.

Hi there, apologies if you've tried this already but work down through the suggestions here http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03181888#N104
In particular note the "What if a Connection error message displays on the control panel" section in Solution 1 and the procedure for resetting the printer.
Hope this helps resolve the problem.
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Automatically output report to excel from a batch job

We have business users who require that a standard report be run daily as a batch job and output to a printer, which is using a large pile of paper every day. I have challenged the rationale for this without success, and am trying to find a way to continue to run the batch job but output the report to an excel file and e-mail it to a manager. I know that this can be done by a good ABAP programmer, but I am trying to find a way to set up the batch job to do this without additional ABAP, as programming resources are very limited. I would appreciate input from anybody who knows how to do this.

Likely because your user is continuing to call the service in a Windows (classic) DOMAIN\username format, and not in the Claims identity it should be.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Dust spot issues with time lapse

When batch processing images for time lapse jpeg exports the spot removal tool there come moments where high contrast transitions become messed up due to the the section of the dust spot tool that is selecting and copying from being different than the location of the actual spot being corrected. This can resulting in circular flashes where the removal takes place when running the time lapse. I was wondering if anyone has found a way around this, or if there are any settings that can be adjusted via the spot removal options? I've tried several settings, including attempts at exposure radial gradients (instead of the spot removal tool) with little luck. The only sure method I've found is going and moving the spot placement to another section of the image frame by frame. This can become extremely time consuming.
Any assistance or advice on this issue is appreciated.

Unfortunately when shooting hundreds to thousands of images for time lapse work, dust spots crop up constantly no matter how often I clean the sensor. Dust rattles off of the inside of the camera onto the sensor all the time during sequences. Lower fstops (a larger aperture) usually only make the dust spots larger, albeit slightly lighter in opacity, but more difficult to remove due to the area they take up. They are darker when shooting at small apertures, but they are smaller, and somewhat easier to deal with when batching spot healing.
Was hoping there was some setting with the spot healing brush I wasn't aware of. Perhaps I can nag the developers to figure out a more complex algorithm that goes through each still in the sequence and automatically moves the spot healing repair selection point to a more suitable portion of the image when copying batch settings to the entire sequence...similar to what it does when doing each image individually. Can't be that much more work...perhaps it will take a bit of time to run through hundreds of images, but it's better than the hours it takes to work over a single sequence by hand.
Thanks for the reply though.

How to get all AD User accounts, associated with any application/MSA/Batch Job running in a Local or Remote machine using Script (PowerShell)

Dear Scripting Guys,
I am working in an AD migration project (Migration from old legacy AD domains to single AD domain) and in the transition phase. Our infrastructure contains lots
of Users, Servers and Workstations. Authentication is being done through AD only. Many UNIX and LINUX based box are being authenticated through AD bridge to AD.
We have lot of applications in our environment. Many applications are configured to use Managed Service Accounts. Many Workstations and servers are running batch
jobs with AD user credentials. Many applications are using AD user accounts to carry out their processes.
We need to find out all those AD Users, which are configured as MSA, Which are configured for batch jobs and which are being used for different applications on
our network (Need to find out for every machine on network).
These identified AD Users will be migrated to the new Domain with top priority. I get stuck with this requirement and your support will be deeply appreciated.
I hope a well designed PS script can achieve this.
Thanks in advance...
Thanks & Regards Bedanta S Mishra

Hey Satyajit,
Thank you for your valuable reply. It is really a great notion to enable account logon audit and collect those events for the analysis. But you know it is also a tedious job when thousand of Users come in to picture. You can imagine how complex it will be
for this analysis, where more than 200000 users getting logged in through AD. It is the fact that when a batch / MS or an application uses a Domain Users credential with successful process, automatically a successful logon event will be triggered in associated
DC. But there are also too many users which are not part of these accounts like MSA/Batch jobs or not linked to any application. In that case we have to get through unwanted events.
Recently jrv, provided me a beautiful script to find out all MSA from a machine or from a list of machines in an AD environment. (Covers MSA part.)
$Report= 'Audit_Report.html'
$Computers= Get-ADComputer -Filter 'Enabled -eq $True' | Select -Expand Name
$head=@'
<title>Non-Standard Service Accounts</title>
<style>
BODY{background-color :#FFFFF}
TABLE{Border-width:thin;border-style: solid;border-color:Black;border-collapse: collapse;}
TH{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: ThreeDShadow}
TD{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: Transparent}
</style>
$sections=@()
foreach($computer in $Computers){
$sections+=Get-WmiObject -ComputerName $Computer -class Win32_Service -ErrorAction SilentlyContinue |
Select-Object -Property StartName,Name,DisplayName |
ConvertTo-Html -PreContent "<H2>Non-Standard Service Accounts on '$Computer'</H2>" -Fragment
$body=$sections | out-string
ConvertTo-Html -Body $body -Head $head | Out-File $report
Invoke-Item $report
A script can be designed to get all scheduled back ground batch jobs in a machine, from which the author / the Owner of that scheduled job can be extracted. like below one...
Function Get-ScheduledTasks
Param
[Alias("Computer","ComputerName")]
[Parameter(Position=1,ValuefromPipeline=$true,ValuefromPipelineByPropertyName=$true)]
[string[]]$Name = $env:COMPUTERNAME
[switch]$RootOnly = $false
Begin
$tasks = @()
$schedule = New-Object -ComObject "Schedule.Service"
Process
Function Get-Tasks
Param($path)
$out = @()
$schedule.GetFolder($path).GetTasks(0) | % {
$xml = [xml]$_.xml
$out += New-Object psobject -Property @{
"ComputerName" = $Computer
"Name" = $_.Name
"Path" = $_.Path
"LastRunTime" = $_.LastRunTime
"NextRunTime" = $_.NextRunTime
"Actions" = ($xml.Task.Actions.Exec | % { "$($_.Command) $($_.Arguments)" }) -join "`n"
"Triggers" = $(If($xml.task.triggers){ForEach($task in ($xml.task.triggers | gm | Where{$_.membertype -eq "Property"})){$xml.task.triggers.$($task.name)}})
"Enabled" = $xml.task.settings.enabled
"Author" = $xml.task.principals.Principal.UserID
"Description" = $xml.task.registrationInfo.Description
"LastTaskResult" = $_.LastTaskResult
"RunAs" = $xml.task.principals.principal.userid
If(!$RootOnly)
$schedule.GetFolder($path).GetFolders(0) | % {
$out += get-Tasks($_.Path)
$out
ForEach($Computer in $Name)
If(Test-Connection $computer -count 1 -quiet)
$schedule.connect($Computer)
$tasks += Get-Tasks "\"
Else
Write-Error "Cannot connect to $Computer. Please check it's network connectivity."
Break
$tasks
End
[System.Runtime.Interopservices.Marshal]::ReleaseComObject($schedule) | Out-Null
Remove-Variable schedule
Get-ScheduledTasks -RootOnly | Format-Table -Wrap -Autosize -Property RunAs,ComputerName,Actions
So I think, can a PS script be designed to get the report of all running applications which use domain accounts for their authentication to carry out their process. So from that result we can filter out the AD accounts being used for those
applications. After that these three individual modules can be compacted in to a single script to provide the desired output as per the requirement in a single report.
Thanks & Regards Bedanta S Mishra

MRBR- Remove Blocking reason automatically

Hi,
we have below scenario:
Invoice created for a vendor in MIRO with reference to PO withour GR. Payment Block "R-Invoice Verification" is set in the invoice due to Quantity and Price Block.
Now the requirement is to remove the Invoice block automatically in the background and work item should be removed from the inbox.
When we scheduled a batch job for MRBR with options "Release automatically" ,system selects only the invoice where the reason code is invalid i.e., where a GR has been performed for the invoice.
Checked SDN forum but could not find the solution.
Can you suggest how we can automatically remove the block using MRBR without creating GR.
Thanks in advance.
Raj.

Hi,
Go for Hold in MIRO & then Post Held MIRO Invoices
http://e-mory.blogspot.com/2007/11/sap-mir6-post-miro-invoice.html
Regards,
Biju K

Sessions from apex are blocking by batch job

Hi All,
In my 10.2.0.3 linux with apex 3.1.1
We have a batch job using a package,that is doing DML operation in tables depends upon some condition.And this job will run daily 5 hours.
The sessions from apex that is also using some procedures in the same package.Some days the sessions from apex are blocking by batch job.While blocking wait event from apex sessions are 'library cache pin'.Once the batch job completes then automatically removes the block.
What may be the reason?
Thanks in Advance,
Sunil

The query against v$lock is not relevant if the blocked sessions are waiting on "library cache pin" - so you seem to have two separate problems.
If you have a session waiting on another session's transaction slot in mode 4 there are several possible causes - often related to indexes, but there are a couple of "internal" problems as well. If you see this locking issue again some of the simplest things to check for would be session 1 inserting (without commit) some rows in a table with a unique key, and session 2 then trying to insert a duplicate. Session 2 has to wait for session 1 to commit or rollback before deciding whether to return a "duplicate key" error, or to continue processing.
The "library cache pin" waits suggest that the package had become invalid while the batch job is running it, and one of the Apex jobs is trying to recompile it. But if the batch job is currently running (hence pinning) the "executable", then the Apex job can't get the necessary exlusive pin until the batch job ends and releases its pin.
Read the notes in the script $ORACLE_HOME/rdbms/admin/catblock.sql about creating views that let you see more of the information about library cache (KGL) locks and pins.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan

Invoice not generated through Batch Job

Hello
I am facing a Problem in Batch Job. When the delivery is created through VL01n transaction manually, the Invoice for this delivery is created automatically. However for one of the delivery the Invoice was not created automatically through Batch Job.
Can some one help me how to go further on this problem? I have checked the Batch Job and found that it is schedule daily, However the Delviery was created after this schedule time. So ideally this delivery should have been considered for automatic generation of Invoice in the next schedule run of the Batch Job. However this has not happened.
Any views on this
Regards
Screams

Hello,
Please check the billing date and the billing date which is in the variant. in the variant there could be that the billing date might have been specified from and to, in any case billing date for the document is not past the variant billing date it will pick up.

Error starting batch job through Data Services Web Service

I have a customer running our web service interface to BODS. We have not been able to successfully start any jobs due to the following error:
Services sent the request to start batch job 'Job_Test_Web_Services' on server 'null'. The Job Server refused the request with error: Job Server not found
The same interface works against other environments (all XI 3.1), so I need some pointers as to where it gets the server name. Sounds to me like a configuration issue, but I am not a BO DS admin and don't know where to look.
Please help.
Thanks.

I was able to reproduce this issue in our own lab by going to the BO DS Server Manager and removing the servers from the configuration. Not sure if this is what is happening at this customer site, but I will check it out and post back.
Not sure why they would not have a Job Server defined if they want to run jobs!

Removing dust spots - automatically / batch job

Similar Messages

Maybe you are looking for