Removing extra spaces from email attachment of text file

Hi All,
I am having a question in opening email attachment file in text mode.
Whenever I am trying to open a CSV file in text mode after each row it adds blank spaces. These blank spaces are to complete the 255 characters on each row I guess.
My client doesn't want these space. So can anybody tell how to remove those spaces?
<removed by moderator> response would be helpful.
Thanks and Regards
Nishad
Edited by: Thomas Zloch on Apr 28, 2011 4:02 PM - priority normalized

Hi,
There is no solution for this as u know that the data which you r sending in csv its actually getting populated from an internal table.
You cannot make your internel table dynamic for this requirment.
It should have a fixed length. Now if the data is less then also the length.
So u have identified correct that because of 255 the blank space is population, nothing is in your hand.
U have to convince the client, to make them understand where is the limitation.
Thanks & Regards
Prasenjit

Similar Messages

How to remove extra spaces from Data Matrix Label?

Hi All,
Kindly let me know how we can remove extra spaces from Data Matrix Label.
Suppose we have this following code in SO10.
^FO1380,1879^COY,78^BY4^BXR,6,200^FH^FD[)>_1E06_1DF01001T_1D6JUN&v_huf&&v_hul&_1DV&v_supnum1&_1D16K&v_del&_1D6D&v_flddat1&095_1D2L&v_unload&_1D
P&v_article&_1D4L&v_madein&_1D_1E_04^FS.
Variable have there own value. and the desired result will be shown like the attachment.
But in my code it splits into new line when CMIR value has 3 spaces.
If CMIR value is 1S0 820 355 A . then it creats a new line.
Kindly suggest me any possible solution.
Thanks,
Partha

Hi Gaurav,
In print preview we can't see any space or new line. But when it scanned by TSB (barcode scanner) it will generate a new line when there is 3 space CMIR value.
So where should I write SHIFT CMIR LEFT DELETING LEADING space this code?
Because there is no space coming at the time of debugging or print preview.
And in SO10 the code written as
^FO1380,1879^BY4^BXR,6,200^FH^FD[)>
Here CMIR value is 1SO 820 303 A
and generated output is like this.
And desired output should be like this.

Why can I not remove extra spaces from Mail when composing?

I am using Mail Version 8.1 and I cannot find a way to remove extra spaces from between my lines while composing. Every Enter makes the cursor go down two lines and there is no way to type in the space in between. There seems to be now way to see the html or any tags that can be causing this, and I cannot seem to find any setting to change the line spacing either. Does anyone know where to find any of these options so I can simply make the text single space?

Open a message-editing window. Under the Edit menu, deselect all the options in the Spelling and Substitutions sub-menus. Test.

Removing extra spaces from a long document

Hello
I have seen a number of find/change and GREP formulas to do similar things. I have NO scripting or coding experience and have labored to understand GREP.
So I am a little afraid to use it as I don't know what all the modifiers refer to (I do have a printout of some neat GREP cheatsheets like Mike Witherell's that I can absorb until I obtain a good reference )
I need something I can copy and paste into either find/change or GREP dialog that will do the following in less than 12 steps (hopefully) without doing something catastrophic like removing all of my paragraph marks (which I almost did using someones GREP expression)
No spaces before any comma, period, exclamation mark, question mark, colon, semicolon
One space only after any of those
One Space before any opening parenthesis and one space after the closing parenthesis
No space after the opening parenthesis or before the closing parenthesis
Remove any double or extra spaces ( en, em etc.)
Remove any commas before parentheses
Remove any spaces after a paragraph mark
I think that's it
I did find this one recently (Maybe Jongware?)
[~m~>~f~|~S~s<~/~,~3~4%]{2
Which from my dim understanding addresses em, en, flush and hair space , nonbreaking space ,figure space,third space--not sure of the rest. Really this is way over my head.
I know this will be a piece of cake for you guys
Thanks

A: Removing extra spaces from a long document

Peter is too modest, he's doing just great.
No space BEFORE-One Space after ---period,semicolon,colon, exclamation, question mark,CLOSING Parenth,Bracket,Brace, single & Dbl. quotation marks
Find (\s)([.,;:!\)\]\}~}~]])
Replace with $2
No space AFTER-One Space Before----OPENING bracket,brace,parenthesis,Dbl & single quotes
Find ([\[\{$~{~[])(\s)
Replace with $1
These remove the space before/after but do not automatically add a space after/before.
In the first case, you could add a space right after the '$2' in the Replace With string, but it already may have a space, in which case you suddenly have two. One alternative is to optionally remove it with the Find string (add it as an optional match) and always add it with the Replace string, but remember that this string will only be found if there is a space preceding it. That way you'd only check the space after in cases where there was a bad space before.
So I propose you add another two find/changes to add the space, only when necessary.
One Space After: find
([.,;:!$\]\}~}~]])(?!\s)
replace:
$0 [followed by one single space]
One Space Before: find
(?<!\s)([\[\{$~{~[])
replace:
[one single space] $0
Color-coding with my WhatTheGrep might make it just a tad clearer what's going on in that jumble of codes:
(1 [ .,;:! $ \] \} ~} ~] ] 1) (?!! \s !)
and
(?<!<! \s <!) (1 [ \[ \{ \( ~{ ~[ ] 1)
(Orange is lookahead/lookbehind, blue is a regular escaped character, pink is an InDesign special character, green is normal grouping parentheses, and lavender is a character group.)

Nokia e63 save email attachment as text file

When I receive email with text document attached and select save, it is always saved in office notes. While this is probably a reasonable thing to do, the problem is that I cannot find the saved file using file manager. So this text document becomes unavailable for other installed programs. Answers to following questions would help mightily:
1. How to save email attachment to specified folder (any attachment)?
2. How to save note from Menu->Office->Notes to some specified folder?
3. Where Menu->Office->Notes stores the notes? (Active Notes stores them in folder called ActiveNotes in root folder)
4. Is it possible to remove this program, since its features are completely covered by Active notes?

The email client saves attachments to the folder Others if you choose 'save' from the menu. Notes cannot be individually accessed, they're a some kind of database hidden deep into your phone. To save your note to some folder the only thing you can do is copy and paste it to Quick Office and save it from there.
You can't remove the Notes program. I've moved all my notes to Active Notes and use the memory card to store them. As you said, Active Notes does all that Notes does, and more. Notes just starts up a few milliseconds faster
Message Edited by kvirtanen on 13-Mar-2009 01:57 PM
kvirtanen.deviantart.com

Email attachment for text file using ABAP with funny format output

Hi All,
I am developing an ABAP program to generate an email to an external email address by using Function Module FUNCTION 'SO_DOCUMENT_SEND_API1. There is an attachment included in this program. The attachment is generated by reading through a data file from an Application Server and place it in the internal table before attaching it to the function module.
Currently when I download the data file through SO01, I found that the data file looks a bit funny as below. It seems that all the letters are separated with an additional space in between.
Funny Output:
A B C D 1 2 3 A B C
Suppose Output:
ABCD 123 ABC
I am not too sure if there is any output format that I need to set in order to make it works?

hi Sree Ram,
Thanks for your quick reply. The following is my code. I am not too sure if your reply will help to change the format of my data file or attachment sent through email.
Thanks.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = w_doc_data
      put_in_outbox              = 'X'
      sender_address             = ld_sender_add
      sender_address_type        = ld_sender_add_type
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = w_sent_all
    TABLES
      packing_list               = t_packing_list
      contents_bin               = t_attachment
      contents_txt               = it_message
      receivers                  = t_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.

Remove extra space

Hi master,
how to remove extra space from the tables and columns
thanks

Apparently table and/or column names that have been created don't match those being used in queries.
This typically happens when you use tools that generate scripts with object (table/column) names in "double-quotes" thus causing them to be CaSe-SeNsItIvE to Oracle.
See this short demo of sensitive object names :
SQL> create table "My Table" (col_1 varchar2(5)); -- Sensitive Name used
Table created.
SQL> desc my table
Usage: DESCRIBE [schema.]object[@db_link] -- cannot find an object by the name "my table"
SQL> desc "My Table" -- I must explicitly use the Sensitive Name now !!!!
Name                                                                     Null?    Type
COL_1                                                                             VARCHAR2(5)
SQL> desc "MY TABLE" -- The name does not map across CASE either !
ERROR:
ORA-04043: object "MY TABLE" does not exist
SQL> create table MY TABLE (col_1 varchar2(15)); -- Normally, object names cannot contain spaces !
create table MY TABLE (col_1 varchar2(15))
ERROR at line 1:
ORA-00922: missing or invalid option
SQL> create table MY_TABLE (col_1 varchar2(15)); --- this is the correct way to name an object. DON'T USE "double-quotes" ; DON'T USE SPACEs
Table created.
SQL> desc MY_TABLE -- the properly named
Name                                                                     Null?    Type
COL_1                                                                             VARCHAR2(15)
SQL> desc "My Table" -- the first , Sensitive name
Name                                                                     Null?    Type
COL_1                                                                             VARCHAR2(5)
SQL>Hemant K Chitale
http://hemantoracledba.blogspot.com

How to attach a text file as an attachment to email message?

Hello Everybody,
I have a .csv file, in which details about emp-id, emp-name, e-expenses for Reimbursement and email address are stored.
My application reads this .csv file, and sends a mail to each employee with his id, salary details in text format. (by changing content type to "text/plain") The code is working fine. But,
My problem is:
The message is sent as message body to the end user.
The end user / the person who receives this mail will not be a technical person. So,
1) If he trys to take a print out of this e-mail, He get only half of it.(as no. of colums will be more than paper size).
2) I am finding alignment problem. IF employee name is too big, other columns will shift to right and data will not be exactly under column header. (it is going in zig zag way)
So, I thought sending text file with all the details as an attachment might do well.
But, I don't know how to attach a text file to email-message body.
code
try
               {               String s1="";
                              File f1 = new File(the path);
                              FileInputStream fstream = new FileInputStream(f1); //new
                              BufferedReader br = new BufferedReader(new InputStreamReader(fstream));
                              int count=0;
                              while((s1=br.readLine())!=null )
                                             count++;
                                             //out.println("within while loop "+count);
                                             StringTokenizer st = new StringTokenizer(s1,",");
                                             if ((st.hasMoreTokens())&&(count>1))
                                        String a=st.nextToken().trim();
                                             String b=st.nextToken();
                                             String c=st.nextToken();
                                             String d=st.nextToken();
                                             String e=st.nextToken();
                                             String f=st.nextToken();
                                             String g=st.nextToken();
                                             String h=st.nextToken();
                                             String i=st.nextToken();
                                             String j=st.nextToken();
                                             String k=st.nextToken();
                                             String l=st.nextToken();
                                             String m=st.nextToken();
                                             String n=st.nextToken();
                                             String o=st.nextToken();
                                             String p=st.nextToken();
                                             String q=st.nextToken();
                                             String mail=st.nextToken();
                                             String s=st.nextToken();
                                             //out.println("b="+b+"c="+c+"d="+d+"e="+e+"f="+f+"mail="+mail);
                                             %>
<%
                                        String to =mail;
                                             String from =request.getParameter("fromadd");
                                             String subject ="Statement of Expenses";
                                             String smtp ="mail.xxxxxxxxxx.com";
                                             String message="";
                                             message=message.concat("EMP ID");
                                             message=message.concat("     ");
                                             message=message.concat("Name");
                                             message=message.concat("          ");
                                             message=message.concat("Dept No.");
                                             message=message.concat("     ");
                                             message=message.concat("Acc No.");
                                             message=message.concat("     ");
                                             message=message.concat("*****************************************************************************************");
                                             message=message.concat(a);
                                             message=message.concat("     ");
                                             message=message.concat(b);
                                             message=message.concat("          ");
                                             message=message.concat(c);
                                             message=message.concat("     ");
                                             message=message.concat(d);
                                             Properties props = System.getProperties();
                                             // Puts the SMTP server name to properties object
                                             props.put("mail.smtp.host", smtp);
                                             // Get the default Session using Properties Object
                                             Session session1 = Session.getDefaultInstance(props, null);
                                             // Create a New message
                                             MimeMessage msg = new MimeMessage(session1);
                                             // Set the From address
                                             msg.setFrom(new InternetAddress(from));
                                             // Setting the "To recipients" addresses
                                        msg.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
                                        /* // Setting the "cc recipients" addresses
                                        msg.setRecipients(Message.RecipientType.CC,InternetAddress.parse(cc, false));
                                        // Setting the "Bcc recipients" addresses
                                        msg.setRecipients(Message.RecipientType.BCC,InternetAddress.parse(bcc, false)); */
                                        // Sets the Subject
                                        msg.setSubject(subject);
                                        // set the meaasge in HTML format
                                        msg.setContent(message,"text/plain");
                                        // Set the Date: header
                                        msg.setSentDate(new java.util.Date());
                                        // Send the message
                                        Transport.send(msg);
                                        // Display Success message
                                        result =result.concat("<tr><td>"+b+"</td>"+"<td>"+to+"</td></tr>");
                                                  }//end of if of hasmore element
                                   }// end of while loop
                    out.println(result);
}catch(Exception e)
                    // If here, then error in sending Mail. Display Error message.
                    result="Unable to send your message";
                    out.println("e="+e);
Any help will be appreciated.
Thanks and regards.
Ashvini

<html>
<p>
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText("Your Messages");
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource("Your Attachments");
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(fds.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp1);
mp.addBodyPart(mbp2);
msg.setContent(mp);
msg.saveChanges();
msg.writeTo(System.out);
msg.setSubject(subject);
Transport.send(msg);
</p>
<B><U>See you can add above code in your program and see the magic</U></B>
Bye
regards--
Ashish
</html>

How to remove extra spaces in a xml formatted string

Hi,
I am trying to remove extra spaces between the xml tags. For
example, if a string is something like
' <header 1> <header 2> test </header 2> </header1>'
I want to get rid of the spaces only between the closing tag of header 1 and opening tag of header 2 and closing tag of header 2 and opening tag of header 1, in short ,I want to remove the extra spaces between the tags if there are no other characters between them. I do not want the remove the spaces between closing tag header 2 and opening tag of header ,as there is occurence of other characters.
I am aware that this can be done by looping through the string and using instr to identify the characters '<' and '>', but I would like to use it as a last resort only.
Can anyone suggest me a better way of doing it in a single go by manipulating the data?
Any help is really appreciated.
Regards,
Anil.

You can use the replace function. If you only expect one extra space, then:
scott@ORA92> select replace ('<header 1> <header 2> test </header 2> </header1>',
2 '><', '><')
3 from dual
4 /
REPLACE('<HEADER1><HEADER2>TEST</HEADER2></HEADER
<header 1> <header 2> test </header 2> </header1>
If you expect more extra spaces, then you will need to wrap another replace function around it for each space, for example the following will eliminate up to three spaces:
scott@ORA92> select replace (replace (replace ('<header 1> <header 2> test </header 2> </header1>',
2 '> <', '><'), '> <', '><'), '> <', '><')
3 from dual
4 /
REPLACE(REPLACE(REPLACE('<HEADER1><HEADER2>TEST
<header 1><header 2> test </header 2></header1>

How can I remove multiple hyperlinks from a slab of text?

Hi everyone,
I copy a lot of text from websites into Pages documents, and I'm looking for a way to remove multiple hyperlinks from a slab of text all at once without having to remove each hyperlink individually? This would save me a lot of time!
Not sure if Pages actually has this feature - if not then it would be a good feature request. It would be similar to MS Word's function to clear a slab of text of all formatting (including hyperlinks).
Any tips would be much appreciated!
Thanks,
-Chris

Select all the text concerned. Then:
This will stop them being live links but they will probably be blue and underlined. Click the underline button twice, and use the colour selector to turn them black.

How do I remove extra profiles from color mangement in Print Module?

If you're talking about the "short list" then click on other and then uncheck the ones that you don't want displayed. If you're talking about the long list, then you will have to browse to the folder containing the profiles and then delete them manually.

How to find the extra spaces from personal computer?

I cannot update Adobe new items since the box window told me that there were no spaces from my computer. Who can teach me how to find the extra spaces from my computer? Besides, there are 1/3 spaces for IOS, 1/3 spaces for virtual computer and 1/3 spaces for Adobe in my computer. No any photos and movies in my computer now.

I do not understand the question... what do you mean by spaces?
What size is your hard drive, and what does your system tell you about unused hard drive space?

Attaching a text file

Hello,
I have wiritten a GUI which allows a user to enter in a message in a text field called "field1", a process button is pressed by the user and the message is processed by my algorithm. The output is then displayed in another text field called "field2". This works fine,
I would like to develop this GUI a bit further and this the problem. Instead of the user typing in the text in "field1" I would like to provide the functionality where the user can attach a text file which is then processed by my algorithm. I have made an attach button on my GUI for this purpose. The problem im having is, how to attach the file to the "field1" text field which will then be processed by the algorithm. I have included the event handler part for the attach button.
Thanks
public void actionPerformed(ActionEvent e)
        if (e.getSource() == attachbutton)
                     // I would like to attach a text file to this field ready to be processed by the algorithm
                 }

http://forum.java.sun.com/thread.jspa?threadID=632246&messageID=3663618
If you want more read File Chooser section from sun tutorial.

How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap?

How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class? These are the keys,values: TreeMap The data I'd like to Cache is (date from the file, time of the file, current time).
import java.io.*;
public class CacheData {
public static void main(String[] args) throws IOException {
String target_dir = "C:\\Files";
String output = "C:\\Files\output.txt";
File dir = new File(target_dir);
File[] files = dir.listFiles();
// open the Printwriter before your loop
PrintWriter outputStream = new PrintWriter(output);
for (File textfiles : files) {
if (textfiles.isFile() && textfiles.getName().endsWith(".txt")) {
BufferedReader inputStream = null;
// close the outputstream after the loop
outputStream.close();
try {
inputStream = new BufferedReader(new FileReader(textfiles));
String line;
while ((line = inputStream.readLine()) != null) {
System.out.println(line);
// Write Content
outputStream.println(line);
} finally {
if (inputStream != null) {
inputStream.close();

Remove extra space value of the field in text element

Dear All,
Can any one please help me out to remove the blank spaces in the text elements of SF.
we are printing Label in which i want print quantity of material. and i am using MSEG-MENGE for quantity of maetrial.
But the issues is when we are printing the label. We are getting spaces in the Text elements fields &MSEG-MENGE&.
i am also check menge field within mseg table. in which menge field define as QUAN data type with length 13.
<
MAT CODE:&t_MSEG-MATNR&
DESC:&MAKTX&
QTY:&t_MSEG-MENGE&
UOM:&t_MSEG-MEINS&
>
My Output in SF:
MAT CODE:11000002
DESC:Coarse Aggregate 10mm Sieve
QTY:             960
UOM:LBM
MIGO.NO.:4900000025
how to remove extra blank spaces in the text elements ( QTY:             960 )
guide me.........

Dear All,
I am using code block in SF before text element.
In The Text Element ...
<
MAT CODE:&t_MSEG-MATNR&
DESC:&MAKTX&
QTY:&t_MSEG-MENGE&
UOM:&t_MSEG-MEINS&
MIGO.NO.:&t_MSEG-MBLNR&
PO.NO.:&t_MSEG-EBELN&
LOCATION:&t_MSEG-WERK&&NAME1&
>
In programe Line ( code block )....
<
read table t_mseg index w_index.
qty = t_mseg-menge.
condense qty.
SELECT SINGLE name1 FROM t001w INTO name1 WHERE werks = t_mseg-werks.
SELECT SINGLE maktx FROM makt INTO maktx WHERE matnr = t_mseg-matnr.
>
My Output:
MAT CODE:11000002
DESC:Coarse Aggregate 10mm Sieve
QTY: 960
UOM:LBM
MIGO.NO.:4900000025
Only problem in value of Quantity field .
guide me.........

Removing extra spaces from email attachment of text file

Similar Messages

Maybe you are looking for