REmoving Flash Web templates in LR4.4

Hi,
As Flash is on the way out (and can't be viewed on iPads anyway) I wanted to remove the Flash templates from my LR web modiule but I can't find a way to do it. Newither can I find the files onthe HDD.
How do I remove the Flash templates fromthe template browser (in Lightroom Templates not user templates, Ican find those)
Regards
Chris

"How" you remove them depends which operating system you use.
However, they'll just come back at the next update. It's easier to ignore them.

Similar Messages

Help needed with Flash web template

I am working on a flash website for our Boy Scout Troop. It is based on a template purchased on-line.
I am using Adobe Flash CS4.
Here is a preview link to the template that I am working with... http://www.easytemplates.com/templates/flash/boy-scout/
If you click on the "foundation" button, you will see a movie under the Eagle Honor Roll, named "read more". When you click on that movie, it opens a window in the upper left corner of the screen. I am having two issues with this, as well as several other similar movies that look the same, and perform the same function (opening differant text boxs).
I was able to easily go into the actionscript for each of them and change the name of the title that shows up on the top of the pop up window, but I can't for the life of me find where to edit the text. Every other pop-up window has a seperate movie file which I can edit, but this one does not. I have looked through all of the Symbols multiple times, and there is not one listed. The "read more" movie that is in the left hand box on the information page has a symbol that contains the text. the ones on the "Foundation" and "Our Program" pages do not. How do I change the text, if there is no symbol containing that text?
I also would like to be able to change the position of the pop-up window when it opens, but cannot find where to do that.
My other issue is editing the "Gallery" button at the top of the page, to point to a PHP Nuke site, that I am going to use for content management. I have found several tutorials on-line mentioning the use of the "on release get URL" command, but everytime I try to use it, it just breaks the animation on the button, and still does not open the URL in question. I have attached a .TXT file containing the current action associated with the button's "Blue box" (not sure what this is really called). I just need to know how to incorporate the "on release get URL" command without messing up the animatioon associated with the button.

start with the button that causes the text to be displayed. find what it does (which may not be easy because most templates are coded by novice or intermediate level coders) and follow that trail to the text. (note: the text may be in a txt or xml file that's loaded.)
to have a button release open a file, use:
yourbtn.onRelease=function(){
getURL("http://www.adobe.com");

Can I convert Flash web templates to HTML?

I constructed my website using Lightroom 5 template in flash to create photo presentations. There are templates in HTML but they are less fancy. Is there a way to translate the Flash files into HTML5?

Sorry no. You could try something like juice box.
http://www.juicebox.net/

Thumbnail Captions for Flash Web Galleries

Oh I do love Lightroom!
However... :)
My clients occasionally are going to be wanting to refer to a certain image number and I would love to have a Lightroom Flash Web Template that included the file name near the thumbnails for reference. Anyone know how I might do this? Take it slow, I am a noob with the coding and whatnot.
Thanks!

Erik,
I have the same question/problem. I do need the second link or ability to enlarge one of the posed image. Have you found the answer?
Leo
[email protected]

Cannot "Publish" a Purchased Web Template

Hi,
I am using a trial of CS3, and when i completed some demo's i
could publish without a problem, creating SWF's of the online
tutorials.
I purchased a Flash Web Template and happily modiied it in
flash so the FLA is different, but when I attempt to publish it the
task bar appears as normal , looks like its doing something, but it
doesn't. No SWF is created.
Any ideas why I can't publish my modified template?
Thanks, Simon.
(I also notice the template is V8 and Actionscript 2.0, i
tried selecting V9 and Action Script 3.0 but got loads of
compilation errors for compatability).

Hi,
I am not too sure about the specific errors which you are getting, But then for WAD running and execution, we can check for the IGS Server connectivity.
It can be checked with Basis Folks. Cause we also had several problems related to WAD and eventually it all turned out to be a Problem with the connectivity to the IGS Server.
igs server is the graphics server which is maintained for all the graphics related to WAD.
Hope it helps,
Thanks,
Pradip Parmar.

LR4 Flash Web Gallery Color Problems

The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
Can anyone offer a solution?
Thanks for any suggestions.
Stephen

I have windows 7 and monitor with a calibrated profile. LR4 flash gallery's displayed are color correct, but the same gallery displayed on a uncalibrated (wide gamut) monitor shows saturated colors. Check your color management in windows 7 if a profile is associated with your monitor. The best color managed web browser for windows is safari for windows next is firefox see also this website http://www.gballard.net/psd/go_live_page_profile/embeddedJPEGprofiles.html

Remove "inforarea" option when press "open view" in 0ADHOC web template

hello expert,
in a web template 0ADHOC, when you click on "open view" it gives you the option to select your view from history, favorites, roles, and infoarea.
I'd would like to remove the possibility to select a view from "infoarea" in the web template (a little bit like hiding the infoarea button in Bex using S_RS_FOLD).
How can I achieve this?
Many thks in advance,
/Sid

hi,
I have just made a test:
I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
so those texts are exist as well
Only question is: does those texts numbers same for all systems?
Regards,
Andrzej

Web Template - remove navigation functionality

Hello -
Does anyone know an easy way of removing the navigation functionality of a web template. I don't want my users to have the abilty to drill down, across, filter but I need to publish this report on the web with the WAD. Perhaps there is a table interface class that will allow me to do this?
Thanks,
nv

Nyrole,
If you turn off the Context Menu settings it will restrict what they can do.
Regards
Gill

Another NEW Flash Web Gallery Template!

Hey Guys,
I just finished a cool new web gallery template for Lightroom. This one allows you to select multiple images and give them a category name. The template will then separate the images out into different galleries/categories. From the template you can view all the images or just images in a particular gallery/category.
Its really cool! Check out the gallery sample i have on http://www.lightroomgalleries.com
Hope you all like the template! And let me know if you have comments, suggestions, or if you run into any problems.

Very nice. Thanks for posting. It is great to stat to see some real veriety out there for Web Templates for LR.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Use web template to open a report from a menu

Hi all,
I have created one web template where I have a role menu that shows all reports that are available to the user. When the user clicks on one of these reports, the report displays in a new window. So far everything is working fine.
But, I have also created another web template and I want the report that is displayed in a new window to use this template. How do I do this? I have been looking at the settings for the Role menu, but can't find anywhere to put the template name...
Anyone have any ideas?
Thanks and regards,
Tove-Mette

Hello,
yes you can use the publish function, but only to add new entries.
In Transaction pfcg (not in WAD or BEx) in SAP GUI and then select your role at the tab "Menu" you can add/remove/maintain/organize your menu.
just click on a menu entry and take sth.like edit.
Then you will see a link if you didn#t find the string &template_id= the system will take the standard template (Tranaction spro), and you can easily add or change this parameter.
Hope that helps, please ask if you need further explanation.
Regards
Marcus

Error on page from BW 3.5's default web template

Hi Guru's,
We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we arent sure why.
On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5s default template. The prompt web page is fine. No errors on page messages.
However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
SAPBWSetFocus(anchor);
Error: Object expected
Code: 0
Its in the set_tab() function.
<script type="text/javascript">

</script>
Because the error goes away as soon as we navigate Im thinking some object isnt being created or initialized, but since the view source code of these pages are identical Im wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
Any help will be much appreciated.
Thanks,
Jeri

Heike,
Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
Please, do you have any other suggestions?
Thanks,
Jeri

SAP BW Web Report : Web Template

Hi,
I have created a SAP Query view and a web template. Then i have created the web report using the below URL.
http://port/sap/bw/Pub?sap-language=EN&cmd=ldoc&TEMPLATE_ID=TEMPLATE1
Later i added filter condition sin the web template and created the URL which filter values for that particular Cost Center.
http://port/sap/bw/PUB?SAP-LANGUAGE=EN&CMD=LDOC&FILTER_VALUE=7&TEMPLATE_ID=TEMPLATE1&FILTER_IOBJNM_1=COSTCENTERA&FILTER_VALUE_1=7046
I face issues with the below points.
1.     Now the Title of the web report has to be changed. Where can i change this ? ( HTML code / web template )
2.     The Title of the report is selected from a Region Value from the .css file. Is there any relation between this fiel and ABAP code at the backend.
3.     The Cost center has hierarchy values at the back end. Even if I do not enable the hierarchy for Cost center, I get values for that parent node. But the child nodes show extra projects if hierarchy is enabled. Should that be enabled ?
4.     In the view I am getting both the fileds Cost centerA and Costcenter B. But in the report for filter COSTCENTERA=7046, I get only COSTCENTERB and vise-versa. What could be the reason ? What should I do to get both the fileds in the Web report.
Appreciating your valuable suggestions on the above points.
Please help me in resolving these issues.
Many thanks
Eswari.B

Hi Vlad,
I revised the code as below and now Iam able to sucessfully execute the report in BPS layout, however the BPS variable value is not passing to the BI Report; any ideas... Thanks Again...
<iframe id="BPSREPOR"
name="BPS Report"
src="/sap/bi/mime/bex/icons/pixel.gif"
width="1000" height="600"></iframe>
<script language="JavaScript" type="text/javascript">
var frame = document.getElementById( 'BPSREPOR' );
var url = 'http://wbvmburpr10.warnerbros.com:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=';
var filter = '&FILTER_IOBJNM=0COMP_CODE&FILTER_COLLAPS=&FILTER_VALUE_EXT=';
// Example using fiscal year 2004 and variant K4: K4/2004 => comp = #K4/#
var comp = '';
var appl = 'BPSREPOR';
var varvl = '<%descr(BPS_VARIABLE/value)%>';
// Option: Adjust the 'SELECT' to your local language
if (varvl != "" && varvl != "-- SELECT --"){
// expected formatting of variable selector: Text(Key) or Key
var convert = /((.*))/;
convert.exec(varvl);
// If there is value in brackets it is the key
if ( RegExp.$1 != "") varvl = RegExp.$1;
// create URL
url = url + appl + filter + varvl;
alert (url);
// remove possible white spaces
url = url.replace(/ /,"");
// set source attribute of iframe to new URL
frame.src = url;
</script>

Debugging a web item when executing a web template in BI7

Hi,
I would like some help in the following
1> Class name (or package that contains all the class/methods) when a particular SAP delivered web item get executed in a Web template in SAP BI 7.0
2> whats the class that gets executed for an 'Analysis' WEB item in BI 7.0. Since it has a lot of properties, do we have multiple classes for each of these properties, for example when I remove a certain row or column by drag and drop, what methods gets executed? And how do I figure out the methods for a particular function
3> eventually I would like to debug through this for trouble shooting, How do I go about debugging a web template
Can anybody help me in this? Really appreciate
Thanks
BPS IP,

Posting this back again, to see if there is any sugesstion or answer. Any help in thois area wpuld be appreciated.
Thanks

Web Templates with Tabs

Hi, We have quite a few reports we have developed for users that have around 5 or 6 tabs. When we adding or remove any functionality we have to maintain each of these reports. Does anyone else have/had this issue and what is a good strategy to move away from Web Templates with tabs?
Thanks!

to my knowldge, we don't have any option... we need to maintain every time.
I can think how complex it is...if you have 5 or 6 tabs... it 's very complex. Going forward... for small change.. like adding new tab etc... you need to be very careful.
On every call... try to reset to initial every time you call a tab... then try to pass values as per the requirement. ex: Title, Filters, settings, table etc.
Initial view we will disble every thing... we will one by one... with multiple commands...
Nagesh Ganisetti.

Edit Photoshop Flash Web Gallery

Hi!
I'm completely new to Flash but I've been trying to edit the
Flash gallery 1 included in Photoshop CS2. What I like to do is to
make links from the title in the head. I figured out how I can copy
the code for the email field that already exists. But I cant really
understand how I change it so it works on a webpage instead of an
email.
The template I'm using can be downloaded here:
Photoshop
Flash Web Gallery
I found the specific code in title.class.as
The code I want to change looks like this:
if (email != undefined) {
var emailObj = this.createEmptyMovieClip('email_mc',
this.nextDepth())
emailObj.beenClicked = false;
//trace ('we have email info it is '+email);
currentY -= titleH2.size;
emailObj.createTextBlock('email_txt', currentX, currentY,
'dynamic', titleH2, 1600, 20, false, false, true, false, email,
config.embedFont, false);
emailObj.email_txt._width = emailObj.email_txt.textWidth+10;
emailObj.email_txt.textColor = theGallery.link.toHex();
emailObj.onRollOver = emailObj.onDragOver = function () {
//trace("over");
this.email_txt.textColor = theGallery.link.toHex();
emailObj.onRollOut = emailObj.onDragOut = function () {
//trace("out");
if (this.beenClicked == false){
this.email_txt.textColor = theGallery.link.toHex();
} else {
this.email_txt.textColor = theGallery.vlink.toHex();
emailObj.onPress = function () {
//trace("out");
this.email_txt.textColor = theGallery.alink.toHex();
emailObj.onRelease = function () {
this.beenClicked = true;
this.email_txt.textColor = theGallery.vlink.toHex();
mailTo ( email)
//trace("release");
What I want to do is to create a link in the code for:
if (one != undefined) {
//trace ('we have a one it is '+one+' that is '+one.length);
currentY -= titleH2.size;
this.createTextBlock('one_txt', currentX, currentY,
'dynamic', titleH2, 1600, 20, false, false, true, false, one,
config.embedFont, false);
Lets say that I want it to link to a page called one.htm
How do I do this?

This would be the least instrusive hack I can find that may get you around the problem. In the js fle there is a function...
function detectFlash(ver) {
if (getFlashVersion() >= ver) {
return true;
} else {
return false;
Try changing this function to...
function detectFlash(ver) {
if (getFlashVersion() >= ver) {
return true;
} else {
return true;
This should eliminate making the text appear. If not, there's another thing you can try.
A better approach wuld be to use more up to date embedding code, though I cannot say whether the js file is written specifically for this Flash application such that it includes code that talks to the Flash file.

REmoving Flash Web templates in LR4.4

Similar Messages

Maybe you are looking for