Removing guidlelines
How do you remove the center line from showing in a 2 page spread when I export to pdf?
In the pdf it shows as a dotted line.
Barbara
I am creating for a digital magazine, and they all only do a 2 page view which makes the text too small to read for the most part. When I import it for the digital it looks fine but I will also have a choice to be able to download the PDF which had the lines in it. I made it with just 1 column per page which comes out in the spread looking like 2 columns so it looks nice and so easy to read, I really like the digital so now readers will have the choice for digital or PDF and be able to read them easily.
Thanks very much for your help. Are you a designer?
Barbara
Similar Messages
-
8/29/2014 7:15am
It seems to me that if Microsoft's platform can not fix it with the troubleshooter that the troubleshooter sucks. It does not know when errors are thrown so your developer sucks on creating software for errors that are popping up in your software?
if a error is thrown in Windows 8 it should catch it upon a thrown error in programming? This hsould be a level 1 ticket. Since when I call you support for error in your product no one wants to address problems in your software and get mea tech to resolve
it?
The question now is how do I fix this and why is it causing me an internal error 500 for my web server install?
I may have other issues but I need access to my web server through my browser I used fsocketopen to troubleshoot it?
It gets back a internal 500 on Gecko process in firefox and on IE it just won't serve out the document in my web server abyss or apache? So the question is what service is broken so I can't serve my [web server] pages out? Let me go through all the event
logs that I have with errors below?
Under Applications:
1) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 10
2) LMS Service cannot connect to Intel(R) MEI driver. Error level 1
3) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 3
4) SearchIndexer (3476) Windows: The database engine attached a database (1, C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb). (Time=0 seconds)
5) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.125, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0: Evenet Id level 326.
6) SearchIndexer (3476) Windows: The database engine started a new instance (0). (Time=0 seconds)
7) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000. eveent level 105
8) SearchIndexer (3476) Windows: The database engine (6.03.9600.0000) is starting a new instance (0). Error Level 102
Under Security:
1) We might want to check this out here User Account Management changed?
Under Setup: no errors.
Under System below:
1) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.Event level 1014
2) Intel(R) 82567LM-3 Gigabit Network Connection
Network link is disconnected.
3) The system has returned from a low power state.
Sleep Time: 2014-08-29T05:10:07.602701000Z
Wake Time: 2014-08-29T13:13:47.945773100Z
Wake Source: Device -USB Root Hub : Error level 1
4) The browser has forced an election on network \Device\NetBT_Tcpip_{58565081-3013-43B6-AE07-CC89C71F6036} because a master browser was stopped. Event Id 8033.
5) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Event error 219.
6) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{3c83e4cf-28e9-11e4-827b-b8ac6f8aec21}#0000000000004000. Error Level Id 219.
7) The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again. Error Id 10114.
8) Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. Event Id 15005.
9) The supersafer64 service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000.
10) The SNMP Service encountered an error while accessing the registry key SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration. Error: 1500.
11) The SAS Core Service service failed to start due to the following error:
The system cannot find the file specified. 7000
12 The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 1. The site has been disabled. The data field contains the error number. 1004
13) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Error level 219
14) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded. Error level 1014.
Now I need help with all these error since Windows 8 with maybe 15 applications is failing after no setup errors? What would cause these we need to find out? Since I can not use your product with so many developer errors? and to put out a products that doesn
work is pointless? So please call me and have some help me through the errors and tell your support to stop ignoring the errors that broke the products?
Sincerely, William Dunlap {removed} N. Academy blvd, 201, Colorado Springs, CO 80910 http:\\interfacesone.fnhost.org
{removed}. I need a tech to help me get my web server up?So now you don't release the security breaches in windows 8. You mean to tell me that you can use Powershell - Using WMI to breach security in VB apps on the web by getting my file structures?
What is this all about?
1 Set VPN NIC Settings
2 Get Network Data from servers
Set VPN NIC Settings
$error.clear | out-null
cls
$ErrorActionPreference = "SilentlyContinue"
if ( $Args.Count -ne 1 ) { "
Not enough arguments
Usage :
script.ps1 server
"; exit }
$server = $Args[0].ToLower()
"We are working with $server"
$netAdapt = get-wmiobject -class Win32_NetworkAdapter -computer $server
if (!($netAdapt)) {
"Failed to connect to the target server!"
exit(5)
foreach ($card in $netAdapt) {
IF (!([string]::IsNullOrEmpty($card.NetConnectionID))) {
if ($card.NetConnectionID.CompareTo("VPN Virtual NIC") -eq 0) {
$myID = $card.DeviceID
$NAC = [wmi]"\\$server\root\cimv2:Win32_NetworkAdapterConfiguration.index='$myid'"
$guid=$NAC.settingID
"Setting DNS Toggles"
$dnsToggle = $NAC.SetDynamicDNSRegistration(0,0)
if ($dnsToggle) {
"Success"
} else {
"Failure"
$strShowNicKeyName = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\$guid\connection"
#$strShowNicKeyName
$reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $server)
$regKey= $reg.OpenSubKey("$strShowNicKeyName",$true)
$showIcon = $regKey.GetValue("ShowIcon")
if (!($showIcon -eq 1)) {
"The icon is hidden.. Setting it now"
$setIcon = $regKey.SetValue('ShowIcon',1,'DWORD')
} else {
"The icon is visible already."
"Script Ends"
Get Network Data from servers
$myfile = get-content servers.txt
echo "Server IPs Subnet GW" | out-file "Results.txt" -Append
foreach ($server in $myfile) {
Write-Host "Looking at $server"
$colitems = Get-WmiObject win32_NetworkAdapterConfiguration -computer "$server" -Filter 'IPEnabled = "True"' | select ipaddress,ipsubnet,index,defaultipgateway
foreach($objItem in $colItems) {
Write-Host ""
$myip = $objItem.IPAddress -join " "
$mySubnet = $objItem.IPSubnet
$myGW = $objItem.DefaultIPGateway
$temp = $objItem.index
$myid = Get-WmiObject win32_NetworkAdapter -computer "$server" -Filter "index = $temp" | select netconnectionid
$myid = $myid -replace "@{netconnectionid=",""
$myid = $myid -Replace "}",""
echo "$server $myip $mySubnet $myGW $myid"
echo "$server $myip $mySubnet $myGW $myid" | out-file "Results.txt" -Append
Is this possible on any machine with power shell and if so how is access done?
William Dunlap -
Creating a backup of functional drive removed from broken laptop
I have a new Macbook Pro running Mountain Lion that is damaged and won't turn on. I have the drive removed and can access it using a docking station attached to my iMac running 10.6.
What is the simplest way to backup the data from this drive so that after the laptop is repaired I can return my data to the Macbook Pro?Using Disk Utility to clone a drive will automatically erase the Destination drive if it isn't already erased. To backup to a drive with stuff already on it you would need to use a backup utility like one of these:
Suggested Backup Software
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Be sure the backup utility is NOT configured to erase all files on the destination that are not on the source. If there are files identical to those already on the drive, then they will be overwritten. -
My 5th gen iPod touh was stolen a month ago. I immediately removed that device from my account and yet today I looked at my photostream and there are tons of pics of these people on my photostream. How do I get this to stop?!?
Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.
-
Please read the title; itunes match has removed my playlists on itunes and iphone and the songs that are supposedly 'matched' on itunes are not showing up on my iphone.
Any Really annoyed about thisiTunes Match does not have the ability to remove local files.
The service operates by comparing the selected iTunes Library with the iTunes Store content and 'matching' or 'uploading' - it is very straightforward a 'match' provides equivalent access to iTunes Store content as a recognised 'purchase'; upload simply copies a 256k AAC variant into the cloud. There are no elements of this activity that can erase the local library content.
Would suggest you explore possible alternative causes of file loss. Given the pattern described of selective deletion, leaving many Songs intact - would suggest making at least 2 secure offline Song file backups and starting the library again from a fresh install of iTunes once a thorough sweep of the system has been completed for virus. It is also worth assessing the physical security of the system - who has access & with what privileges.
To access Songs from the cloud, you would have to manually delete the Song from the library or open an empty library - so even when accessing content, iTunes Match provides no local deletion capability. -
How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory
-
Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7Try a new profile. See [[Recovering important data from an old profile]]
-
ALV . How to remove the sort buttons on toolbar in ALV report?
Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m. -
How to remove blank pages from WebI Report in view page layout option
Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull. -
DNS: reverse zone comes back after remove and some follow up issues
hello community,
after installation of OSL i had setup dns with a primary zone.
the automatically created reverse zone for my internal network is fine.
whenever i enter a new system the default for the ip address is 10.0.0.1 and the reverse zone is automatically setup for this ip address.
whenever i remove this reverse zone it come back automatically after saving the dns configuration.
with this come some follow up error.
server admin claim that there is no name server configured for this reverse zone.
when i configure it the configured name server entry vanished after clicking the save button.
when i try to configure settings i can not. i get the error message that the configuration can not be saved cause of the missing name server for the reverse zone i am not using ....
in the log file i can see that the file for reverse zone can not be found.
when i check the dns configuration in the shell i can see that the reverse zone file is not there.
someone has an idea
- whats the best way to fix this?
- why is the gui still showing the reverse zone i am not using?
- is the dns configuration also in the ldap db with wrong entries?
regards
christianClean out your zone definitions, and start over. Server Admin is unfortunately seemingly fussy around the authoritative server stuff and the order stuff gets entered, and it seems you can get into a sequence where it doesn't have what it needs. I had encountered couple of cases when I was in a similar state as you're in now, and I ended up clearing and deleting the primary zone and re-adding the zone and the hosts, being careful to add the authoritative server as the first step of adding a zone.
-
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation. -
I recently ran monolingual and removed all but the intel-64 bit architectures. Now my iphoto (along with Idvd, garage band, imovie) will not open. Here is the message that I get.
Process: iPhoto [3543]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4750000~1
Code Type: X86 (Native)
Parent Process: launchd [109]
Date/Time: 2011-06-10 21:48:59.821 -0500
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -4164908 sec
Crashes Since Last Report: 8
Per-App Crashes Since Last Report: 11
Anonymous UUID: 45357CCD-011B-482E-A2EA-CF42096F1321
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x24300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0901, 0x26400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000Please let me know when you find a fix. I did the same thing and have tried every suggestion I can find online. The message I get is...
Process: iPhoto [4991]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-6070000~1
Code Type: X86 (Native)
Parent Process: launchd [142]
Date/Time: 2011-06-13 23:39:38.485 +1200
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -1643976 sec
Crashes Since Last Report: 35
Per-App Crashes Since Last Report: 12
Anonymous UUID: D4811036-EA8D-479D-8D9F-11E2FC8F6D4C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 3.5 GB
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000
I have reinstalled Mac OSX 10.6.3 and done the updates from there.
I have reinstalled ilife 11 from disk and done the updates.
I have deleted all the suggested files and then redone install and updates.
I have tried just reinstalling iphoto and doing updates.
Is there any way to get a replacement - /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
file with the right architecture? -
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
BuildID: 20120713134347
CrashTime: 1342625511
EMCheckCompatibility: true
Email: (email removed)
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342622791
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 1909
StartupTime: 1342625464
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 14.0.1
This report also contains technical information about the state of the application when it crashed.
Deleted all of these and reinstalled
/Users/<user_acct>/Library/Application Support/Firefox/
/Users/<user_acct>/Library/Caches/Firefox/
/Users/<user_acct>/Library/Preferences/org.mozilla.firefox.plist
I have tried rebooting, running Disk Utility and repaired permissions, and checked I have admin privileges.
I have Reset Launch Services in Snow Leopard.
I have created a test account
System Preferences > Users & Groups create a "Test Account"
then tried launching FF from there = crash
I have installed FF 13.0.1
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:13.0.1
BuildID: 20120614114901
CrashTime: 1342642579
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342642540
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 26
StartupTime: 1342642569
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/13.0.1/firstrun/
Vendor: Mozilla
Version: 13.0.1
I have installed version 12 and
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:12.0
BuildID: 20120420145725
CrashTime: 1342643047
EMCheckCompatibility: true
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342643035
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1342643035
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/12.0/firstrun/
Vendor: Mozilla
Version: 12.0
no crash ids since this is version 3.6, the only version that doesn't crash, and I have to use Firefox for work stuff.
I have submitted over a hundred crash reports and included my email, but no one has ever contacted me with any help. This has been going on for weeks. I have been forced to use an outdated version of FF because no one has bother to get back to me. I would be happy to update to 14 and start the crash cycle again if someone wants to give me some suggestions I haven't tried already.
BTW, no font conflicts or RAM problems, (someone else's issue)Maybe you did't understand my previous statement. There are no crashes in FF 3.6, There is no previous evidence FF 14 was ever here, I completely uninstalled all trace of Firefox, no app data, no preferences, no cache. I will upgrade to FF14 so I can send IDs,
so here ya go.
Crash ID: bp-fa9da320-92dc-47f7-afff-33e702120718
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
BuildID: 20120713134347
CrashTime: 1342655269
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342655256
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1342655256
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/14.0.1/whatsnew/?oldversion=rv:1.9.2.13
Vendor: Mozilla
Version: 14.0.1
This report also contains technical information about the state of the application when it crashed. -
basically what title says ^^^^ it on a iphone 4s
Go to the store in iTunes and in the top right click on your account. You can add or remove payment info there.
-
My family shares one Itunes account and I believe it was home sharing that brought all of their music, purchases, movies, etc. onto my Mac's Itunes Library. I want to remove all of their content from it. I turned off Homesharing and that didn't work. All of their music is on my computer and synchs to my Iphone and it's driving me nuts. Please help !
You can deauthorise all 5 at once, then reauthorize the one you want.
Learn how to authorize or deauthorize your computer with your Apple ID.
http://support.apple.com/kb/HT1420
You need to log into iTunes on the computer you want to deauthorise. Otherwise, contact contact iTunes Store support to see if they can help.
Maybe you are looking for
-
i dropped my iphone yesterday on its backside from my computer desk to floor.the distance is about 50cm. and it has a phone case. it did't work any vertical direction lock .then i restarted my phone, it recovered.but i am not sure is it ok ?
-
Hello Experts, A consistency job failed with an errror of "ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED". Any suggestion, how to fix this ? Thank you Regards Rahul Chitte
-
A Question about popup keyword in ABAP programming
Hello Expert, When I write ABAP code like following statement, START-OF The system will popup a help window to suggest the relevant ABAP keyword. in this case, the popup keyword is START-OF-SELECTION. My question is, if the popup keyword is what i wa
-
Foreign key dependency checking
Dear all: I have a question about foreign key checking. Let's say I have two Z table, one is master table and one is transaction table. The master table contains a primary key named CustNo. The transaction table have two primary keys named CustNo and
-
Error message after running Software Update
Please help. I cannot do the latest Software Update. I have tried multiple time and each time I have gotten the same error message. Here it is: "The update could not be expanded and verified. It may have been corrupted or tampered with during downloa