Removing Images from iPhoto

I don't know how to remove images from iPhoto 8 or 6. I prefer to use PhotoShop Elements and I want to move the iPhoto images from wherever they are into a separdate folder so that I can put them into Bridge CS3 and use Elements. But I cannot figure a way to do this. Thanks.

Terence
I purchased the Duplicate Annihilator that you recommended and with about an hour it had detected almost 5,000 duplicates, so I went ahead and identified them, also did the thumbs and found about 300 there, so I put them in the trash and deleted all that came up and now I am down to 5,000 - pictures. I will run it again tomorrow
Thank you for your help, and a bargain to boot, I must tell my Mac store about this!
Very much appreciated.... the reason that I hesitated to bring over the old iPhoto is that a few months back a bunch of my pictures from there 'disappeared' -so I didn't want to import a corrupt application?
Happy trails
Jan

Similar Messages

Moving pics location and removing images from iphoto

Here is the basic breakdown.
1. Imported pics from camera into iphoto.
2. I want to remove some of the pics from iphoto.
3. I do not want to use delete due to I want to burn/move a copy to CD or a different folder on my HD.
4. I moved a couple for test purposes from my iphoto lib to my home folder.
5. Reboot.
6. In iphoto I can still see the photos in the smaller views. but when I try to full screen the photo I get an grey screen ?x type of thing.
I do not want the small pic either.
Advice or direction?
Thanks.
T

T Slap:
To add to Terence's suggestions I'd like to expand on:
3. I do not want to use delete due to I want to burn/move a copy to CD or a different folder on my HD.
To copy those photos to another folder use the File->Export->File Export menu option. This will copy the files to the location of your choice.
To burn the photos to disk so that iPhoto can access them at a later date then use the method described by Terence. To burn just the jpg files to a disk without the iPhoto format use the Export route again to a folder on the desktop and then burn that folder via the Finder.
And do not take the warning about messing with files via the Finder lightly. As you found out it can really mess up the library.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page word document, some recipients get only one page. Also sometimes when I burn an image from iPhoto on to a disc, only part of the image appears. Why?

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

How do I delete images from iphoto after I export them to make room on my hd

I have exported images from iphoto onto an external hard drive to make room for more images on the macbook pro - whenI deleted the files from iphoto page they still seem to be sitting somewhere on the laptop, number are still high and I need to delete them, where do I go to delete the files that have been exported to the external storage, I do not have time machine.

What version of iPhoto?
Did you empty the iPhoyo Trash?

How do I remove images from aperture?

Totally new to apple and aperture so I apologise if this seems like a somewhat noob question but how do I remove images from aperture (using the latest version, 3.4.1)? Coming from a PC and using lightroom I'm used to being able to remove images in two ways:
- removing the image from the "library", so that it no longer shows up in the program at all but is still on your hard drive (when I say removing it from the program entirely, I mean entirely, i.e. not sitting in a trash can or some other place where it's still taking up memory)
- deleting the original image off the hard drive
Is it possible to do either of these things in aperture, on both just a single image or a selection of multiple images, and if so how? I've tried googling this already and am getting a bunch of mixed solutions, none of which have really worked so far, so any answers would be appreciated. Thanks!

The answer partially depends on whether you have a managed or referenced library. Since you're totally new to Aperture, I'm assuming you have a managed library since that's the default.
FYI: Managed means Aperture handles image files and places them inside the library file. Referenced means you manage the image files and Aperture only points to (references) them.
For a managed library, select an image you want to delete. Type command-delete. (That's the reverse delete key next to the "=" key). (You can also right-click an image and choose Delete Version) That will remove the images from their Project and place in the Aperture Trash. They're still taking up space in the Trash. If you really want them gone for good, right-click the Trash in the library pane and select Empty Trash. Poof.
For a reference library, I forgot the exact details since I don't use this type of library, but you'll be asked (or can check a box) to delete the original file from the disk.

How can I access images from IPhoto on my Mac to Photoshop CS6

How can I access images from IPhoto library on my Mac to Photoshop CS6? I enable jpg with format "Photoshop" and this is what comes up - "Could not complete your request because Photoshop does not recognize this type of file"

MountainArtist wrote:
…I enable jpg with format "Photoshop" and this is what comes up - "Could not complete your request because Photoshop does not recognize this type of file"
Photoshop is not a format. It's an application.
What you are looking at are not true JPEGs, just iPhoto's "tease" representations of the hidden images it swallowed, as explained above.

How do I remove images from Notes app?

How do I remove images from Notes app?
I sometimes find that, when cutting and pasting text from the web, an image is also copied (pretty much at all times I try and avoid this, but sometimes the selection process doesn't allow for fine enough control - e.g. a whole block of content may be selected, rather than just the few words I'm trying to copy).
I then find, once it's part of my note, that I cannot select the unwanted image and remove it. Can anyone tell me if this is something that can be done, and if so... how?
Thanks, Sebastain

Hi Drew & Kilgore*
Thanks for your replies. I also have and use Simplenote, although I went off it for a while, when it started crashing all the time on me. It seems to be more stable again now, so I'll start using it more regularly again, perhaps.
I am, obviously, disappointed that one can't simply select ANY object within a Notes document and choose to delete it. As I rather suspected, the only solution is an annoying workaround. Apple stuff seems to get more like this as time goes by. At least in my experience.
I solved the issue my own way in the end, but I guess it was close to your 1st idea DR, and your 2nd option, KT: I basically cut and pasted everything above, and then everything below, the image, and pasted both chunks of text into a new note. So it took two passes, and left me with the original note just displaying the image, which I then trashed.
Tapping to the right of the image followed by deletion was what I hoped & expected would work. But instead the image stayed put and the text below the cursor would simply slide along the right hand side, moving upwards as I deleted! Most bizarre, to my mind at least.
Anyway thanks for the feedback. But, for anyone else that might want to know how to do this, the answer is: NO, you can't select and delete an image once it's in one of your notes!
* I quite recently watched the rather strange Bruce Willis / Nick Nolte 'Breakfast of Champions' movie... I think I still prefer the book to the film!

Cannot select images from iPhoto

I made a desktop AIR application that allows users to upload images to our server. Everything works except for Mac people trying to select images from iPhoto.
This is how I have the file selection setup:
private var fileRefList:FileReferenceList;
private var imageFileTypes:FileFilter = new FileFilter("Images (*.jpg, *.jpeg)", "*.jpg; *.jpeg");
private var allImageTypes:Array = new Array(imageFileTypes);
You can see the problem in the screenshot is that the select button won't enable, even though images are selected. Any ideas?

This is an example of the problem. It actually works the first time you select iphoto images, but if you try it again the select button (in the file browser window) is disabled.
UploadImageExample.fxp
UploadImageExample.air

When exporting images from iPhoto library to Aperture 3 library the highlights go red and the shadow area goes blue. This happen to all images in the Aperture 3 library, why?

For some reason all the images in Aperture 3 library have had their highlights go red and the shadow area goes blue. I can correct them one at a time with contrast control. This just happen on its on after I uploaded MOuntain Lion. Now when I go to transfer images from iPhoto this happens. The images are all right in iPhoto but this is not the case with Apeerture. I have 15,000 images in Aperture 3 and I can't afford the time to correct them one at a time. What is it that I did to cause this problem?

You have "Highlight Hot and Cold Areas" turned on.
Toggle this on/off from the View menu.
Thresholds are set at "Aperture➞Preferences➞Advanced". (I have mine set to 100% ~ it's not clear what the scale is.)
Message was edited by: Kirby Krieger

How can I import images from iphoto with the albums and folders?

How can I import images from iphoto without losing the albums and folders I already created?

In Organizer, you can choose File>get Photos and Videos>From iPhoto.
Importing from iPhoto'09: If in iPhoto, you organize your media using photo references, that is, the media actually does not reside inside iPhoto library package, and are referenced through original locations, Organizer does not create new copies of those media and just refer to the original location. but if your iPhoto media reside inside iPhoto library, Organizer creates a copy all media in your pictures folder, also imports albums and tags and other metadata.
Importing from iPhoto'011: In this case, Organizer always creates a copy of your photos in your pictures folder which resides inside iPohto package. It does not import the albums and other metadata like star rating, caption etc.
Hope this information helps!
regards,
vaishali

How do I Export Raw images from Iphoto to Adobe Photo Elements 4

I recently purchased Photo elements 4 because I could import images from Iphoto in Raw format and work with them. Everything I have read and the instructional video sent to me by Adobe make it look and sound very easy but so far I have had no success.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4. However I can not find my Raw images. What am I doing wrong or failing to do and is there some logical sequence that I have to follow to import Raw images.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
Thanks for any help you can provide

dakota8,
iPhoto and Adobe Bridge are incompatible, so you need to decide which one you want to use (for which photos). iPhoto is a database, with many flexible features for organizing your library and finding your photos. Bridge is a file browser with some organizing capabilities. You absolutely should not use Bridge or any other application (Finder included) to browse the files inside your iPhoto Library folder, as it will damage the iPhoto database. To verify, click on iPhoto's Help and read the section "About using the iPhoto Library."
If you want to keep your RAW files in iPhoto, then you'll need to open them from iPhoto. As Dave E said, this can be done by setting the iPhoto pref to export RAW files. You also need to set PE 4 as the external editor in iPhoto's preferences. With this setup, you can select photos using iPhoto, open the RAW files into PE 4, then edit. Now comes the wrinkle in the workflow. Normally, you would do a Save to cause your edited file to be saved back into the iPhoto library. This Save, not Save As, requires that the filename and extension stay the same. Works great with jpeg files. However, once you edit the RAW, the extension (and file format) must change. Save will not work, because any save at this point is treated like a Save As. So you have to Save As to a folder OUTside of your iPhoto Library, and then import it in as a new file. There will be no link between the edited version and its unedited RAW file. You could organize inside iPhoto to display the edited file beside its original RAW, or keep separate rolls for the originals and edits.
With that in mind, you might not want to save the RAW files in iPhoto at all. You could create your own filing system for them, which you would browse using Bridge. Upload using Image Capture to save your files to a folder of your choice. Once you edit the RAW files and save as another format, you could them import into iPhoto for cataloging or further editing. You'll just have to find the system that works best for you.
BTW, don't save your edited RAW files as Adobe RAW. I tried and discovered that iPhoto refuses to import them at all.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4.
There's no transferring involved at all. Bridge is rooting directly inside the iPhoto Library folder. Did I mention that it's best to avoid this?
However I can not find my Raw images.
When you import a file it is saved into the Originals folder. Your RAW files are there, along with any video clips you may have imported.
iPhoto automatically creates a jpeg version of your RAW files and stores it in the Modified folder. It has to do this in order to display the picture on your screen. With video clips, a jpeg of the first frame is created for display purposes.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
If you import both versions into iPhoto, then you have
Originals - RAW
Modified - jpeg
Originals - jpeg
(Modified - jpeg - if you edit the jpeg version or if they are auto-rotated to portrait orientation)
I don't shoot in RAW, so I can't really comment about which workflow would be the most efficient. I just played with it long enough to realize that there is no easy way to do it.
Regards.

IPhoto, moving photo's to my document folder, and remove thumbnails from iphoto.

iPhoto, moving photo's to my document folder, and remove thumbnails from iphoto.
How to? Please...I cut and paste items, it is removed from iphoto for a few seconds then they appear again.

The photos that are appearing on the mini - are they photos taken with an iPhone or iPad? If so, open System Preferences on both computers and select the iCloud tab. On the mini, click the Photos checkmark off and on the MBP click the Photos checkmark on (if it isn't already), then start iPhoto and select Preferences. Select the Photo Stream tab and make sure Photo Stream is on.

Importing Images from iPhoto 11 into Elements 12 Organizer

A friend is having lots of trouble trying to move his images from iPhoto 11 into the Elements Organizer, version 12.
Someone tried to do it for him and he has hundreds of folders in the organizer that don't make any sense and often have only one image in them.
To help him I would like to do two things:
1. How can we delete the entire import and start over?
2. What is the correct way to move these images into the elements organizer?
Thanks for your help.
Mary Lou
PS: It occurs to me that perhaps he needs to export them to his hard drive and then import then into the Organizer. Might this be correct? If it is, he will still need to get rid of all the folder there now.

To anwser the two questions you asked-
1. How can we delete the entire import and start over? : You may select all media in Elements Organizer grid (which he imported from iPhoto) and hit Delete key
2. What is the correct way to move these images into the elements organizer? : The correct way is what he already did. Actually the folder naming convention is same as that of iPhoto. If you see the package contents of iPhoto Library, these folders can be seen there as well. When importing in Elements Organizer, it creates a copy of the iPhoto folder structure and then imports in the catalog.
Thanks
Andaleeb

Unable to remove image from photoshop

unable to remove image from photoshop

in the top line under adobe photoshop cs6
the data of the 2 images appears if i check the x it goes away only to return the next time I close photo and reopen cs6
same thing happens if I close individually or close all seems that any I way close it or empty the data bar
then close photo shop and reopen it the 2 images are back open photo shop from application in the application folder same thing
cut clear grayed out under edit

If I barrow an image from iPhoto, that is drag it to another file or the desktop it seems to half disappear. It still shows until I try to enlarge it then I get a triangle exclamation mark in the enlarged field, once I return to Photos or an Album it is

If I barrow an image from iPhoto, that is drag it to another file or the desktop it seems to half disappear. It still shows until I try to enlarge it then I get a triangle exclamation mark in the enlarged field, once I return to Photos or an Album it is there. However it can no longer be dragged into another file. How can I recover these images? Is there a better way to duplicate a image to locate in outside of iPhoto?
I never had this problem in previous versions of iPhoto.

The ! turns up when iPhoto loses the link to the original file.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Removing Images from iPhoto

Similar Messages

Maybe you are looking for