Removing interleaving lines within FCE

Hi all. My video process is as follows: shoot AVCHD highest quality (1920x1080) on SD700 HD Camcorder. Use Aunsoft MTS converter to create a .MOV file.
Import into FCEx and edit then cut to DVD using Toast. Looking at the post render quality in FCEx I can clearly see interleaving lines.
Can any of the community comment on the viability of my workflow process above and, secondly, is there a "de-interleaver" as in After Effects please?

Hi Tom and thanks for the reply. The SD700 is a Panasonic HD camera which records 1920x1080 MTS / M2TS clips.
When I conect the SDHD card to my Mac and attempt to import via Log & Capture, FCEx often falls over with an error,
so I convert using Aunsoft MTS converter. This also converts the 1080 50p clips and makes them useable in FCEx.
The interlacing bars (thanks for the correction) are clearly visible and if I feed the .MOV output file generated by Aunsoft into After Effects, I can reduce or even remove these interacing bars which detract from the quality of the video I wanted to know if is is possible to do this in FCEx directly.
Thanks again
Richard

Similar Messages

How do I remove the lines from the picture after using rectangular grid tool.

So I was making a pixel character for test purpose for my game, and after I finish I didn't know how remove the lines without messing up the picture. I use the erase to remove the excess lines. So I was wondering how do I remove the lines within the picture with out messing up the picture.
I'm going be using the Illustrator and rectangular grid tool for my game pictures. This is in Illustrator CS6.

If you use the pathfinders unite, you can be left with gaps between your filled objects. If thats the case, use your select menu to select all of one color, then add a stroke with that same color and increase the size of the stroke if necessary. Repeat for the next color until your done.

How to remove first line of outgoing messages: ?xml version="1.0"........

On outgoing messages, when I look in MONI, I see properly formatted XML message.
The first line of all my outgoing files has this line:
<?xml version="1.0" encoding="UTF-8" ?>
Is there a way to suppress this?
If so, is there a way to suppress for only certain partners within one interface?
Thanks,
Jeff

Hi Jeff,
As others pointed without this line the document will not be a valid document. Can you tell your complete requirment. One of these kind of requirement is discussed in this thread, you can see whether its the same in your case or not. If not then tell your complete req. so that somebody can help you out here.
Remove first line in the XML Document
Regards,
---Satish

Removing power lines using the Stroke path method

I watched a video created by Adobe Product Manager Brian O. Hughes titled Adobe Max: Hidden Gems in Photoshop an excellent video (see link below). I have been trying his easy method of removing power lines from an image using the pen tool and stroke path method defined as follows:
Using the pen tool create a path of the line to be removed. Making sure the brush tool is small and set at 100% opacity; click on the Spot Healing Brush making sure it is set to "content aware". Then in the path panel click "stroke path" and it removes the line.
Well I have followed these instructions several times, very simple, but it doesn't remove the line for me. I can manually shift click the start and ending point and it removes it but using the stroke command within the path panel doesn't work. I am making sure the path is active.
Any ideas why it doesn't work for me?
Thanks...........Ralph
Here is the link to the video, his technique is listed near the end, @ minute 56: http://www.youtube.com/user/Photoshop

Hi jjMack, thanks for your response. I found my problem after realizing that I hadn't terminated my pen line. I didn't realize I had to click the end anchor point to complete the line, I thought since the line was obvious on the image that it had been created and thought I couldn't see it in the paths panel because it was so small (these old eyes aren't what they used to be). When clicking on the last anchor point it could easily be seen on the paths panel.. I just don't use the pen tool enough so I didn't realize my error. Learn something everyday. Incidentally, I had set the stroke path on the paths panel to Spot Healing Brush and only used the tools menu to confirm that content aware was selected.
Thanks again JJ................Ralph

How to remove characters/lines from the beginning of an InputStream

Hi,
I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is there an easy/simple way of doing this?
One option I thought would be to read the char by char until 2 end of line chars have been detected and then read the rest of the data to a buffer. And the create a ByteArrayInputStream out of this buffer. Problem with this approach is, that the amount of data can be large, so putting all the data in to memory might cause problems.
Another option is to use BufferredInputStream and use the readline() method twice to get rid of the lines that are not needed. After this I would write the data to some output stream, which is then converted back to input stream. Propably would work, but sound too much of work for a simple thing like this. There has to be better way.
To make it simple, what I need is a method that looks like the following, or something similar
* Removes n number of lines from the beginning of a InputStream.
* @param is InputStream where the lines are removed
* @param numberOfLines int value to indicate how many lines whould be removed
* @return InputStream where lines have been removed.
public InputStream removeLines(InputStream is, numberOfLines);Thanks.

Here's the code, feel free to use it. Comments are also welcome.
public InputStream removeLinesFromTheBeginning(InputStream is, int numberOfLines) throws IOException
          char c = 'c';
          int i = 0;
          for(int n = 0 ; n < numberOfLines ; n++)
               do
                    c = (char)is.read();
                    System.out.print(c);
                    if(c == (char)-1)     // end of stream reached before any newline characters were found.
                         return null;
                    i++;
               while(c != '\n');
               System.out.println();
               System.out.println("Characters removed:" + i);
               System.out.println("n: " + n);
               i = 0;
          return is;
     }Edited by: dave_spaghetti on Jun 16, 2009 5:42 AM
Fixed a bug.

Best way to remove last line-feed in text file

What is the best way to remove last line-feed in text file? (so that the last line of text is the last line, not a line-feed). The best I can come up with is: echo -n "$(cat file.txt)" > newfile.txt
(as echo -n will remove all trailing newline characters)

What is the best way to remove last line-feed in text file? (so that the last line of text is the last line, not a line-feed). The best I can come up with is: echo -n "$(cat file.txt)" > newfile.txt
(as echo -n will remove all trailing newline characters)
According to my experiments, you have removed all line terminators from the file, and replaced those between lines with a space.
That is to say, you have turned a multi-line file into one long line with no line terminator.
If that is what you want, and your files are not very big, then your echo statement might be all you need.
If you need to deal with larger files, you could try using the 'tr' command, and something like
tr '
' ' ' <file.txt >newfile.txt
The only problem with this is, it will most likely give you a trailing space, as the last newline is going to be converted to a space. If that is not acceptable, then something else will have to be arranged.
However, if you really want to maintain a multi-line file, but remove just the very last line terminator, that gets a bit more complicated. This might work for you:
perl -ne '
chomp;
print "
" if $n++ != 0;
print;
' file.txt >newfile.txt
You can use cat -e to see which lines have newlines, and you should see that the last line does not have a newline, but all the others still do.
I guess if you really did mean to remove all newline characters and replace them with a space, except for the last line, then a modification of the above perl script would do that:
perl -ne '
chomp;
print " " if $n++ != 0;
print;
' file.txt >newfile.txt
Am I even close to understanding what you are asking for?

How can i remove a line from an ordinary text file?

It is easy to remove a line from a file by rewriting the file. how can i remove a line without rewriting ? Also, do not use whitespaces to overwrite the line. I expect a perfect line deletion code .....

gimbal2 wrote:
hsc71 wrote:
It's the way you communicate. Try to be carefull with the words you use in your post. It's easy to insult people just by choosing the wrong words. Bold text and capitals is equal to shouting.
shock. You said "wrong words". I am seriously offended by that!
Seriously, would you care that I am offended? I really hope not... Say what you want, people will find reasons to take offense one way or the other.Hehe, maybe you're right, but the OP still has no answer.............and in the end that's what he/she is looking for.

Data Merge - Not removing blank lines when more than one in a row

I am having the same problem as mentioned here: http://forums.adobe.com/message/2109531#2109531 That post is for some reason set as "answered" though the poster said the latest update did not resolve the issue. Has anyone found a solution to this issue?
Thanks much,

I"d suggest you try running the merge WITHOUT removing blank lines, then use GREP to remove empty paragraphs. There's a pre-written saved query in the list.
Peter

//remove this line if you want to edit the code by hand? um which line?

Several of my pages are locking up and I don't know why. As I work through the code, I remembered that I altered some text in a SendEmail by directly altering the page rather than using the Server Behavior. Don't understand why that would matter but whatever...
Now as I ponder if that is causing the problem, I ran across this commented line in the code:
//remove this line if you want to edit the code by hand
But are they talking about the line just after that line of //remove or do they mean the actual comment line of
//remove this line if you want to edit the code by hand?
Thanks for your help

Trigger and $tNG look suspiciously like ADDT code to me. Ask the guys in the ADDT forum (http://forums.adobe.com/community/dreamweaver/addt). There are a couple of them in there who know the code intimately. I haven't touched ADDT for ages.

Removal of Line feed from EDI file in IDOC to EDI file scenario

Hi Experts,
I have one problem related to line feed in EDI file. Currently i am using seeburger mapping to do XML to EDI mapping. After mapping i am using File Adapter(with NFS) to create file in my PI server.
The line looks like
UNB+UNOA......
UNH+1.......
BGM.........
but i want my file in without line feed
UNBUNOA......UNH1......BGM
Can this be possible without use of Shell script?
Is anything i can do in Seeburger mapping [i checked BIC mapper in seeburger and see some parameters there]?
Regards,
Shradha

Hi,
I am explaining my scenario in detail:
my Current EDI file looks like
UNAf1f2............'
UNBf1f2............'
BGMf1f2............'
UNHf1f2............'
now i want my file to be in following format
UNAf1f2............'UNBf1f2............'BGMf1f2............'UNHf1f2............'
NOTE: to create my current file i am using File adapter with NFS and seeburger mapping.
Can you please tell me a way to remove the line feed from the current file ?
I already tried newline checkbox from seeburger and it is not working. and other parameter i can use from see burger mapping tool which will remove my line feed.
Regards,
Shradha

How do I remove a line in Layout?

There is a line in section text layout that I wish to either remove or move around (shown as the selected red line). But I can't seem to delete or move them once I selected it in the layout. Why? Thanks!

Thanks! It works. But if I apply the change to the section, it will wipe out all the images of all the sections... and I have a lot of images!
What's the best way to remove that line and not cause too much images? Can I do it page by page?

My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

Does this only happen on specific pages?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to disable notifications as a test (you may want to reverse this).
You can try to set the dom.webnotifications.enabled pref to false on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config

I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

TheAshburns,
No worries, we can get you back on the road with the correct voicemail service. Just to be clear, did you want to readd Premium Visual Voicemail? If so, click the link and select question #7 for steps http://www.verizonwireless.com/support/visual-voice-mail-faqs/?lid=sayt&sayt=visual%20voic*
SandyS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Assigning sequential numbers for every lines within a group of records

The scenario is:
This set of records with group number, lets say 100(group number) contains 7 lines/records. How to assign line numbers (sequential) for each line within these groups on the fly during the mapping process before inserting these set of rows in the target. I know it is easy to achieve in a procedure, but not sure how to do this in the mapping.
please advice.
Thanks,
Prabha

Use Rank function
SQL> select empno,ename,deptno,(rank() over (partition by deptno order by empno)) seqno from emp;
EMPNO ENAME DEPTNO SEQNO
7782 CLARK 10 1
7839 KING 10 2
7934 MILLER 10 3
7369 SMITH1 20 1
7566 JONES 20 2
7788 SCOTT 20 3
7876 ADAMS 20 4
7902 FORD 20 5
7499 ALLEN 30 1
7521 WARD 30 2
7654 MARTIN 30 3
7698 BLAKE 30 4
7844 TURNER 30 5
7900 JAMES 30 6
1111 Test 40 1
1222 test 1
1333 2
17 rows selected

How to remove dashed line

I want to ask you how I can remove this blue dashed line?
http://i.stack.imgur.com/WQpwt.png
Ref javafx 2 - How to remove dashed line - Stack Overflow

Hi,
This is my code. How do you want to modify this?
List<String> members = new ArrayList<String>();
FileInputStream fstream = new FileInputStream(cube);
DataInputStream in = new DataInputStream(fstream);
BufferedReader br = new BufferedReader(new InputStreamReader(in));
while ((strLine = br.readLine())!=null)
if(!(members.contains(strLine)))
members.add(strLine);
in.close();
mail.send(members);
Thanks,

Removing interleaving lines within FCE

Similar Messages

Maybe you are looking for