Removing Java SE 6 U32 Plugin and replacing with SE 7 U7
I am running Firefox ESR 10.0.7. We have Java Version 6 Update 32 installed on our lab environment. I needed to update Java to overcome the security vulnerabilities associated with the version we had. I downloaded and installed Java Version 7 Update 7; However when I run Firefox (after multiple reboots and deleting the pluginreg.dat file in the Firefox profile) the only plugin that shows up is still Java Version 6 Update 32. Firefox knows not of my Java Version 7 Update 7 installation. How do I get the plugin into Firefox?
Hi, You can find Java update 6 here:
http://java.com/en/download/manual_v6.jsp
It took me a bit of searching but alas I was successful in locating Update 6.
~MomJo13~
Similar Messages
-
Rewrite process and remove the call to f-54 and replace with bapi proces
Hi Gurus,
Please help me to find the soultion.
The root cause of this continual problem is the design and use of BDC session for F-54. Is there a redesign possible with ECC6.0?
I wanted to rewrite the process and remove the call to f-54 and replace with bapi process.
if this is now possible in ECC 6.0
The benefit would be to better control what PO was used in the DP recoupment.
Thanking you,
Raju Singhireddy.Hi Balaji,
Check this BAPI
BAPI_QUOTATION_CREATEFROMDATA
BAPI_QUOTATION_CREATEFROMDATA2
BAPI_CUSTOMERQUOTATION_CHANGE
Regards
Arun -
How do I remove one failing hard drive from raid set and replace with new one
Last Friday apparently one of my raid drives started failing.
As I mentioned on this forum I started getting continous beeping.
I was finally able to get the raid working at a degraded level. I ordered a replacement hard drive which is arriving today.
(In the meantime I made twice daily backups of my work.....)
Below was the message I got from the browser based raid software:
Blahblah 09 1000.2GB RaidSet Member SamSung HD103SJ
Blahblah 10 1000.2GB Free SamSung HD103SJ
Blahblah 11 1000.2GB RaidSet Member SamSung HD103SJ
Blahblah 12 1000.2GB RaidSet Member SamSung HD103SJ
(See this earlier thread if you wish!)
http://forums.adobe.com/thread/727867?tstart=0
At one point when I did the checked the browser interface I saw the message Failed and Degraded
As I said, I was able to work over the weekend on the degraded system.
This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
In any case, the new hard drive is arriving today.
What steps should I take to incorporate the new drive into the raid system.
I have one OS drive
and 4 tb raid drives. One needs to be replaced with the new one that I am getting today.
Thanks
RowbyHarm,
Regarding your comment:
Re: How do I remove one failing hard drive from raid set and replace with new one
Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
Step 1: Identify bad drive serial number using Areca's tools
Step 2: Turn off the computer
Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
Cheers,
Jim -
Can i remove white sky and replace with another
hi, im new to elements and photo editing, is there an easy to understand way of removing a whashed out white sky and replacing it with a blue/white cloud style of sky, i already have a donor sky.thanks for any advice given, ive got v7
Make a selection of a segment of the donor sky with one of the selection tools
Go Edit>copy
Open the picture with the washed out sky
Go to Edit>paste. This will put the donor selection on its own layer. Position it with the move tool over the old sky
Set blend mode of this layer to darken
Set foreground color chip (lower left) to white
Drag foreground to transparent linear gradient from below up to top of tree line (if there are trees)
With soft white brush, at reduced opacity, paint horizon on a new layer at top of stack. Horizon should be lighter than rest of sky..
HTH -
i put my entire itunes library on my phone how can i remove it and replace with playlist
Open itunes, connect iphone, select what you want on the iphone, sync
-
when I first got my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?
Have you copied your library over from your old computer : http://support.apple.com/kb/HT4527 ?
There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141 -
Search given string array and replace with another string array using Regex
Hi All,
I want to search the given string array and replace with another string array using regex in java
for example,
String news = "If you wish to search for any of these characters, they must be preceded by the character to be interpreted"
String fromValue[] = {"you", "search", "for", "any"}
String toValue[] = {"me", "dont search", "never", "trip"}
so the string "you" needs to be converted to "me" i.e you --> me. Similarly
you --> me
search --> don't search
for --> never
any --> trip
I want a SINGLE Regular Expression with search and replaces and returns a SINGLE String after replacing all.
I don't like to iterate one by one and applying regex for each from and to value. Instead i want to iterate the array and form a SINGLE Regulare expression and use to replace the contents of the Entire String.
One Single regular expression which matches the pattern and solve the issue.
the output should be as:
If me wish to don't search never trip etc...,
Please help me to resolve this.
Thanks In Advance,
KathirAs stated, no, it can't be done. But that doesn't mean you have to make a separate pass over the input for each word you want to replace. You can employ a regex that matches any word, then use the lower-level Matcher methods to replace the word or not depending on what was matched. Here's an example: import java.util.*;
import java.util.regex.*;
public class Test
static final List<String> oldWords =
Arrays.asList("you", "search", "for", "any");
static final List<String> newWords =
Arrays.asList("me", "dont search", "never", "trip");
public static void main(String[] args) throws Exception
String str = "If you wish to search for any of these characters, "
+ "they must be preceded by the character to be interpreted";
System.out.println(doReplace(str));
public static String doReplace(String str)
Pattern p = Pattern.compile("\\b\\w+\\b");
Matcher m = p.matcher(str);
StringBuffer sb = new StringBuffer();
while (m.find())
int pos = oldWords.indexOf(m.group());
if (pos > -1)
m.appendReplacement(sb, "");
sb.append(newWords.get(pos));
m.appendTail(sb);
return sb.toString();
} This is just a demonstration of the technique; a real-world solution would require a more complicated regex, and I would probably use a Map instead of the two Lists (or arrays). -
Can anyone tell me how to tranfer the music that is on my Shuffle to iTunes? When I go to Sync it, it gives me a warning that all the music on my Shuffle will be deleted and replaced with what is on my iTunes. I recently changed computers from an HP to a Mac-Mini and did not transfer/sync the itunes prior to getting rid of my itunes. So the music I had on itunes does not appear in my library. Help please!
See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your new Mac and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Then proceed to do the Erase and Sync or restore the device.
B-rock -
I was trying to help my aunt set up her phone to itunes on my computer but when it asked me whether I wanted to set it as new device or use the backup from previous iphone data, I clicked restore from backup. I didn't realize that clicking that option would delete all of her information on the phone and relace it with mine. Her contacts, phones, notes, and all of her information are gone and replaced with mine just like my phone. Is there any way I can restore her phone because she really needs all those information orignally stored on her phone? She just got her phone not long ago and didn't backed up any of her information on her phone.
If her data was not backed up or synced to something, it's gone. Sorry.
-
my iphone is synced and backed up with another computer which is now broken...i have synced it with my new computer but it hasnt transfered anything over to itunes and when i try to add anything to my iphone it says all data will be erased and replaced with the current itunes? i dont want to lose all my apps and music.... i dont know how to go around this problem? i want to back it all up and sync it properly to my new computer so that is now my main computer , so i can add ring tones and music etc with out it erasing everything ive got. any answers would be great and muchly appreciated. thanks, im not sure what operating system my iphone has either.....
It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup. -
Just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password (from several years ago) and cannot activate without it. How can I get past this?
Forgot iCloud username: http://iforgot.apple.com/appleid
Forgot iCloud password: http://iforgot.apple.com -
Suppress Underscore and replace with Space in FR
Hi
Hyperion Financial Reporting 11.1.2.1
In the excel, with a Essbase add-in, we have an option as Suppress--->Underscore Characters
This will eliminate the Underscore and replaces with a space
I want to know if the same functionality exists in the FR Studio
Any insight would be much appreciated
Regards
Tejo jagadeeshSorry, I misread your question. I thought it would be doable though Conditional Format: http://docs.oracle.com/cd/E17236_01/epm.1112/fr_user/ch10s02.html
Something like this:
If Member Name > Dimension > contains > _ > Format Cells > Replace >
But then it replaces the whole member with space which I believe is not something you are looking for.
One other option is to have another alias table in your database and select the new alias table in FR. I know this is an option for Essbase. I am not so sure about other db connections.
Cheers,
Mehmet -
Why were the colour icons taken away from the finder and itunes sidebars and and replaced with grey monochrome shade icons.
Have apple rectified this yet ?
It doesn't make sense to me why they changed this. Can anyone tell me the reason for the lack of colour ?
On another note, can the the sidebar be changed back to the right hand side in preview (when opening PDF's). It has always been on the right in snow leopard and tiger.
It seems to me that their has been too many unnecessary changes in the Lion operating system.
Thanks.babowa wrote:
Why were the colour icons taken away from the finder and itunes sidebars and and replaced with grey monochrome shade icons.
Have apple rectified this yet ?
It doesn't make sense to me why they changed this. Can anyone tell me the reason for the lack of colour ?
You'd have to ask Apple, no one here would know - we are just users like you and aren't allowed to speculate on these forums. You have quite a bit of company though - many people preferred the color.
And, I've not found a way to put the sidebar back on the right side in Preview, but maybe someone else can chime in with that.
I much prefer the sidebar a la sinistra -
Search and replace with wildcard?
I always use search and replace with Homesite but I wonder if
there is a way of using a wildcard? I often want to replace text at
the beginning and end of variable text. I mean, if I have this:
<h3>First text</h3>
<h3>Second text here</h3>
What I'd like is, using the * as a wildcard, is to use
something like this:
Replace <h3>*</h3> with <h2>*</h2>
Any ideas? ThanksMake a backup first, in case this doesn't work (although it should).
Use this in the Find field:
countryText = "([^"]*)";
And this in the Replace field:
<countryText>$1</countryText> -
Find text and replace with image - Help needed
Hi,<br /><br />We need to place the images as inline in the appropriate places.<br /><br />texttexttext<<test1.eps>>texttexttexttexttexttext<<test2.eps>>texttexttexttexttexttext< <test3.eps>>texttexttexttexttexttext<<test4.eps>>texttexttexttexttexttext<<test5.eps>>text texttext<br /><br />This code is helpful for placing a single image at a time, we are unable to place all the images in one shot, can anyone help me out.<br /><br />I am not a programmer.<br /><br />-----------<br />var myDoc = app.activeDocument; <br />app.findPreferences = app.changePreferences = null; <br />var math=document.search("test.eps"); <br />for (i=math.length-1; i >=0; i--)<br />{ myDir = Folder.selectDialog(); <br />AllGraphics = Folder(myDir).getFiles('test.eps') <br />for (i=0; i<math.length; i++) { app.select(anil1[i]); <br /> myDoc.place(AllGraphics[i],false); } }<br />-----------<br /><br />Note: I have taken this code from forum and we have made some changes on this.<br /><br />Kavya
Jongware,<br /><br />I try running it but gives errors:<br /><br />Error Number: 55<br />Error String: Object does not support the property or method 'changePreferences'<br />Line: 24<br />Source: app.findPreferences = app.changePreferences = null;<br /><br />This is the code I used<br /><br />// Find text and replace with image for InDesign CS3 <br />// http://www.adobeforums.com/webx?128@@.3bbf275d.59b6f012<br />var heyItsAnArray = new Array ( <br /><br /> "it contains this line!", <br /><br /> "as well as this one", <br /><br /> "or even more!", <br /><br /> "test.eps" ); <br /><br />for (arrayCount=0; arrayCount<heyItsAnArray.length; arrayCount++) <br /><br />{ <br /><br /> replaceImg (heyItsAnArray[arrayCount]); <br /><br /> } <br /><br />function replaceImg (name) <br /><br />{ var myDoc = app.activeDocument; <br /> app.findPreferences = app.changePreferences = null; <br /> var math=document.search(name); <br /> for (i=math.length-1; i >=0; i--) <br /> { myDir = Folder.selectDialog(); <br /> AllGraphics = Folder(myDir).getFiles(name) <br /> for (i=0; i<math.length; i++) { app.select(anil1[i]); <br /> myDoc.place(AllGraphics[i],false); <br /><br /> } <br /><br /> } <br /><br /> }<br /><br />Michael
Maybe you are looking for
-
After my laptop crashed the second day of class, I had to send it away for repair for 8-12 weeks. I have had to reset it up from scratch and have set-up Firefox. There is a online college math program that they recommend using Firefox with. In the pa
-
User-exit on FBL5 customer line item display
Hello. A customer has a payment term of 5% 10 days, 2% 15 days, net 30 days. SAP provides RFPOS-ZALDT as the 1st cash discount date (invoice date + 10 days). However, there is no field that would show the 2nd cash discount date (invoice date + 15 day
-
I know others are asking FBook for assistance. Which we all know is likely futile. So I thought I would ask here at Firefox. On my PC laptop I run FF4.0 but on my wife's Ibook we run FF2.0. The combination of Ibook 10.3.9 and FF2.0 seems to be a deat
-
Spotlight where files are stored?
Is there a way to get spotlight to show the Path of a file? I don't want to just open it, I want to know where it is.
-
Hello. I have just started to deploy printers using a print server and GP prefernces. Both are new and untested so any details that may be important that I forgot please feel free to let me know. I have an active directory environment using Window