Removing Leading zeros from query output.
Hello Experts,
Is it possible to remove leading zeros from the query output for a particular column?
I have a characteristics 'Reference Document' which has values like '000001386'. The users just need '1386' to be displayed and have asked us to remove the leading zeros.
Is there something that can be done for this at a query level? I can't modify the underlying InfoProvider because this requirement is just for one set of users, the other users need the document nmber in the original format.
Thanks
Arvind
Hi,
you can use ALPHA conversion option in the definition of that particular characteristic.
Try this code in a routine.,in query designer;
data a(9) value '000001386'.
SHIFT a LEFT DELETING LEADING '0'.
write:/ a.
Output will be : 1386
Or use this method also
data a(9) value '000001386'.
Call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
Exporting
input = a
Importing
output = a.
write a.
output:
1386
Regards
CSM Reddy
Similar Messages
-
How to remove leading zero from Material Number
Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM -
How to remove leading zeros from variable
hi,
how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepakYou can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
EXPORTING
INPUT = vbap-matnr
IMPORTING
OUTPUT = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work..... -
Removing leading zeros from a string value
Hi All,
i have a Requirement like , i need remove leading zeros from a string value,
like , 00Raj00Shekar==>Raj00shekar,
how can i do this ?
if it is only with the custom functions ,where can add the fuction in Jdeveloper and SOA Middle ware?
Thanks in Advance,
RajHi Raj,
you can use below function to get the desired output in xsl.
<xsl:value-of select='translate(oraext:left-trim(translate(<inpString>,"0"," "))," ","0")'/>
HTH,
Regards,
Vikas Manchanda -
Conversion routine to remove leading zeros from nonnumeric values.
Hi,
Can anybody tell me any conversion routine while can remove leading zeros from a character value.
Eg :
input : asdfe
output : 0000asdfe and vice versa
I tried with Alpha conversion routine but that is useful only with numeric values.
Please help.
Regards,
Deepti Jain.Hi,
See the following program, and the same logic you can apply in Transfer Rules/Transformations. Take ABAPer help.
REPORT ZALPHA_INPUT.
DATA: ZI(18) TYPE C,
ZO(12) TYPE C.
DATA: ZS(12) TYPE C,
ZR(18) TYPE C.
ZI = '000000099999889925'.
ZS = '099999889925'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = ZI
IMPORTING
OUTPUT = ZO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = ZS
IMPORTING
OUTPUT = ZR .
Write:/ ZI.
Write:/ ZO.
Write:/ ZS.
Write:/ ZR.
Thanks
Reddy -
Remove leading Zeros from the mapped context node(Table)
HI,
I have he following requirement:
In the Leave approval application , in the Approver worklist we have the coloumn to display the resuqester's Perner.
The perner starts with leading zeros. We have to remove these leading zeros.
I have refer the following threads:
Removing leading zeros in a column
How to remove leading zeroes of string
and wiki document:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring
but I am not able to create the calculated attribute in the Mapped Node( NWDS is not allowing indicating it is not allowed for mapped nodes.)
Any pointer how I can remove leading Zeros from existing column?
If I create the calculated attribute outside the mapped node then it is taking only the first value of the mapped node.
Please note we do not want to modify the RFC.
_vishalHi,
Thanks for inputs,
Now I created a test application where the original structure is as follows in the View Controller:
1) Context -> Z_Portal_Test_Input (mapped Node/folder) -> IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
note: this attribute Eid has the values (01, 02,03,04,05)
2)Context -> Z_Portal_Test_Input (mapped Node/folder) -> Output(mapped Node/folder) ->IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
Now as per your suggestion I created another node like this
Context -> Z_Portal_Test_Input (mapped Node/folder) ->testnode(value node) ->testValue(value attribute)
testnode cardinality is 1..1 and singlton = false
In the Layout
The tablecell editor of one coloumn is mapped to text Z_Portal_Test_Input.testnode.testvalue
It is expected that this will show the values like(1,2,3,4,5) but it is showing value(1,1,1,1,1)
The code of get method is:
public java.lang.String getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement element)
//@@begin getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement)
String msg =wdContext.nodeZ_Portal_Test_Input().nodeOutput().nodeIt_Itab().currentIt_ItabElement().getEid();
return removeLeadingZeroes(msg);
//@@end
the functon removeLeadingZeroes(msg) is implemented as per the wiki link.
What wrong I am doing/ missing....
_vishal -
Remove Leading zeros from column
How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071user10876532 wrote:
How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071try
select to_number(replace('00-04-071','-','')) from dual -
How to remove Leading zeros from MATNR "at Database Level"
Hi,
When we create a material in MM01 , we can either create material as Internal Material No. or External Material No. (By Explicitly entering a material No.)
Our requirement is that: When we create an Internal Material , there should NOT be any Leading Zeros in MATNR.
and for External Material No. , Leading Zeros Should be there. (In Database)
1) Now , we can create the No. Range for material in such a way that it will allow only AlphaNumeric entries for Internal Material , and Only Numeric Entries for External Material No.
This should slove the Purpose.
But According to the Client's requirement , Material No can be Numeric OR Alphanumeric for Internal As well as External Material No.
2) We can Add or Remove leading zeros from MATNR at application level. i.e. we can find some BADI / Enhancement where we will Use the Conversion FM (CONVERSION_EXIT_MATN1_OUTPUT or CONVERSION_EXIT_ALPHA_OUTPUT) and remove Leading Zeros from MATNR. But these changes will NOT reflect at Database Level , Because in MATNR Domain , there is a conversion Routine , That will Add Leading Zeros in MATNR While saving in the Database.
3) While Displaying the Material In SE11 , we can also set the "Display Format" as With leading Zeros OR Without Leading Zeros.
But we dont want to Just "Display" material with OR Without Leading Zeros. we want to actually create materials in that way.
What can we do , so that at Database Level our changes are Reflected.
Thanks and Regards,
Anand Gore
Edited by: anandgore on May 18, 2011 3:47 PMThat will Add Leading Zeros in MATNR While saving in the Database.
That is because you have it configured that way. You can configure the storage as you desire. The default is the behavior you are describing. You, or your functional analyst, need to review the documentation on the MM config settings for material master number storage.
Never use CONVERSION_EXIT_ALPHA_OUTPUT for material conversion. Also keep in mind that the MATN1 functions have their own BADI for extended formatting... -
How to remove leading zeros from a string
Hi,
I have a situation here where i need to remove the leading zeros from the incoming data.
i.e if 0009 then it should be taken as 9
if 0230 it should be taken as 230
Regards,
AshishHi ,
Write UDF to parse data .
String dataVal="0230";
int parseVal = Integer.parseInt(dataVal);
System.out.println("parseVal is "+parseVal);
result.addValue(parseVal); or return parseVal;
Nanda -
Hi Gurus,
I have a alpha routine in update rule which will add leading zeros in omaterial,but now I want to display 0material in the report without leading zeros. How to do this ?
Thanks
LizaEasiest thing is remove the conversion routine in 0material, if you dont want leading zeros.
Or
In update rules, use truncate statement to remove leading zeros.
Ravi Thothadri -
BAPI to remove leading zeros from the serial number
Hi All ,
plz can anybody suggest me the alternative BAPI for 'BAPI_SERVNOT_MODIFY_DATA ',whose function is to delete the leading zeros,from the serial number.
Thanks.Perhaps instead of using a BAPI you can code it like this.
DATA:serial(10) TYPE n VALUE '0000340078',
pos TYPE i VALUE 1.
START-OF-SELECTION.
WHILE pos <= 10 AND serial+pos(1) = 0.
pos = pos + 1.
ENDWHILE.
REPLACE ALL OCCURRENCES OF '0' IN serial(pos) WITH space.
WRITE serial. -
Remove leading zeros from a string
Hi,
I have a string with some numeric value.
e.g.
String a = 54890001
I want to make it 10 digits long by padding zeros at the begining
Now a = 0054890001 ( this is for display purpose ) I know how to do it.
Now How can strip these leading zeros from this number to get back the actual number. The user sees this 10 digit number and he can change it to something like 0067490001. Now I want to strip these leading zeros.
and i shd get 67490001.
In other words, how to strip leading zeros from a string ?
Thanks for help
VinodI would try two things: First, just try a straightforward parsing of your String using the Integer.parseInt() method. This is only my first suggestion because the number could be interpreted as octals; only testing will really tell. Second, try a method like this:
public static String removeLeadingZeros(String str) {
if (str == null) {
return null;
char[] chars = str.toCharArray();
int index = 0;
for (; index < str.length; index++) {
if (chars[index] != '0') {
break;
return (index == 0) ? str : str.substring(index);
}Shaun -
Remove leading zeros from string
I am working on a report and I am having a little issue with the output.
I have several dollar amount fields that I need to format with only the decimal place. The amount fields are coming in as strings between 10-16 characters.
I could not find a way to use the currency formatter so I used substrings to break it apart and put it back together in the format I need. However I am now running into an issue with leading zeros. I can't used ReplaceAll as there is a possibility of having a 0 in the amount field.
Here is what I have done for the substrings:
int intLength = strField.length();
intDollar = intLength - 2;
strDollar = strField.substring(1, intDollar);
strCent = strField.substring(intDollar, intLength);
System.out.println(strDollar + "." + strCent);The original string: 0000000037049469
My output now: 00000000370494.69
Desired output: 37049469
Any suggestions on how to remove the leading zeros?
Edited by: xxwhocaresxx on Jun 10, 2009 12:11 PM804350 wrote:
Just wanted to comment that I solved the issue differently by casting the string value to an integer and back. Don't know if it's bad solution performancewiseNever, ever, ever, ever, ever, ever, ever worry about performance. At least not until you're much further along the road; and even then not until you've proved that it's inadequate.
but it's quite compact and readable and did the job of eliminating leading zeros.I suspect you'll also find that it has the great advantage of providing you with a dollar (or cent) value that you can use elsewhere in your program the way it was intended.
example:
String noZeros = String.valueOf(Integer.parseInt(stringWithZeros));Or possibly even more usefully:
int cents = Integer.parseInt(stringWithZeros);
String noZeros = String.valueOf(cents);I'd also suggest looking up the NumberFormat and DecimalFormat classes, and PrintStream.printf(); all very useful for what you're trying to do.
Winston -
How to remove leading zeros from the screen?
Hello friends,
I am working on dialog programming.
I have a field with is NUMC 13. so when value is populated, It removes the leading zeros.
How can I display the my value with leading zeros on the screen painter?Call SE51, layout, double-click on field, attributes, tab Program, check Leading zeros.
Regards,
Raymond -
Remove leading zeros from table
Hi everyone,
I have a NUMC filed with length 3. my problem is that in WDA Table, the values are displayed with leading zeros:
010, 020, 030
I'd like to get thesevalues without the zeros : 10,20,30,
Is this possible somehow? (without modifíing the type of the binded field)
Thanks
N.Do you have table comming from CONTEXT Node ?
if yes then you can exapnd your context node , locate the attribute , select it. Now you should see in bottom pane
PROPERTY
FORMATTING
Display leading zeros - set this to set 'ZERO's as Blank'
-Prashant
Maybe you are looking for
-
Dear all during I try to run oc4j its run but after 3 second it is shutdown Note :I not use application server what is the problem please help me
-
Is power required to use HDMI?
is the AC power adapter required to use the HDMI port on Macbook pro?
-
Quality inspection in repetitive mfg
Hi I have some queries in quality inspection setup for REP MFG. 1. Setting up inprocess inspection 2. GR Inspection from production 3. At what stage the QM lot is generated . The inspection types used for PP-P1 03 and 04 hold good for above or should
-
[SOLVED] Faulty video output with mpv/mplayer, vaapi
Hi, I have a HD6870 with the proprietary catalyst drivers installed, and the packages needed to enable vaapi. The problem I have is that every video application like mpv, mplayer or whatever refuses to give me correct video output with vaapi. mpv for
-
When is the update coming?
Does anyone know when there will be an update to the final release, which I think was a final candidate that shouldn't have passed the test? I don't know if it's just me, or is everyone else having problems with weird editing bugs... like editing lon