Removing links in web pages created using WPC

Hi there,
I am creating web pages using Web page composer. I would like to remove the links Send Feedback, E-mail, Print, Add to Favorites, RSS. How can i achieve this? We are running SP14.
Your comments are highly appreciated.
Regards,
Ponraj M

Dear
For Remove links of
"Add to Favorites"
"E-Mail"
"RSS "
"Send Feedback "
" Print "
Go to Page>right click on it>Edit page-->Page link Option
opne "Page link Option" and remove tick mark what u dont want to display on the page
than Save it and " Publish " it and "Finish"
than go to "Site navigaion" Right click on it and "Publish Site Navigation"
Reward Points if it is helpful

Similar Messages

Web Page created using the Site Studio loads slow.

Web Page created using the Site Studio loads slow, where we hard coded the program to fetch the data from the database.
Please tell me any other way to write the program so that it takes less time to load the site.

Hello Marcus,
I didt the same what you have explained. I followed the following Steps.
1. Created the Web Page and published(It is in Umlock State).
2. Created the Site Navigation and gave the target for that page.
3. In the Portal Content, I created a role , then folder and for the folder property, i gave the External Connector wpcnavigation:///wpccontent/Sites/News/Site Navigation/navigation.wpc ( Say for ex News is a Site) and Entry Point as Yes.
4. After this i assigned that role to a user(Super Admin).
After doing the above steps, I couldnt able to see the Web Page displayed.
Thanks
Gopi

Detail Navigation missing when i link a web page in the WPC Scenario

Hi to all.
I had publish WPC site with the External Connector method.
I have some Web Pages linked in the Navigation Structure, when i link one of this from a internal link (for example in a List link or other) I displayed the page and the detail navigation is visible and the focus on the destination page is light.
Well, when I try to link a Web Page that not is linked in the Navigation structure (open it in the same page) the Navigation structure is missing.
Why? How i can leave the NAvigation structure and display the page?
Many thanks for your help in advance.

Hi,
this scenario is not supported by WPC. I think it was written somewhere (in a note or so). The problem is that if a page is not included in the navigation structure there is no navigation node associated. And so link to that page does not contain NavigationTarget therefore it does not trigger a real portal navigation but just displays the page in the iframe in which it has been fired. That means if you are using the standard framework page (i.e. with frames) page is shown in the inner most frame and the rest is untouched (side effect from which is that the TLN is not updated) and if you are using the light framework page after click the page is shown on the whole window as there are no iframes.
May be you would be able to work around this by selecting such page to be opened in pop up window. Other options exist but they are more complicated as solutions.
Hope that helps.
regards,
--epexpert

Removing links in a web page created using web page composer

Hi there,
I am creating web pages using Web page composer. I would like to remove the links Send Feedback, E-mail, Print, Add to Favorites, RSS. How can i achieve this?
Your comments are highly appreciated.
Regards,
Ponraj M

To configure the functions of the page header you will have to wait for SP14.
I guess to change the header for an SP13 you have to modify the pageheader.jsp. The page is part of the com.sap.nw.wpc.runtime.PageHeaderComponent.
Please note that this modification is not supported by SAP!

Making a web page created with WPC available in an iView

Hi all,
is it possible to display a web page which was created with the WPC in an Iview?
Every guide I found explains how to make it available via Entry Point but I need it in an iView.
Regards,
Bastian Jäschke

Hi,
1. create a new iView with Portal Component as source
2. choose portal archive: com.sap.nw.wpc.runtime
3. choose default on next screen
4. Afterwards choose the category Web Page Composer in the Property Editor.
5. Insert the Path of the Web Page in the property : RID of Compound Document
(you can copy it by clicking on 'Copy Path' in the context menu of the web page)
example: /wpccontent/Sites/MyWebSite/Web Pages/MyWebPage
I translated it from german documentation. Hope, you understand it.
That's the way i did it too nad it worked for me.
Best Regards,
Marcus

How to create a link to web page (URL) to a billing document

Hi,
I have an urgent requirement of creating a link to web page (URL) to a billing document.
I call the function module "GOS_EXECUTE_SERVICE" with :
ip_service = 'URL_CREA'
is_object-objkey = no billing document
is_object-objtype = 'VBRK'
is_object-logsys = 'BO'
ip_rwmode = 'E'
Then, I enter the title and the address.
And, I have the message : "The attachment was successfully created".
But when there's nothing in the attachment list of the billing document.
(Tha table SOOD contains the record )
If any one has some idea about his , how to achieve this functionality, can you please help me.
Thanks
Virginie
geoge bush
Posts: 6
Questions: 0
Points: 6
Registered: 7/9/04
Re: Attaching a file to a purchase Order from EP6 to R/3 4.6C
Posted: Jul 13, 2004 2:46 AM Reply E-mail this post
Hi Somaraju,
I am also looking for A CODE EXAMPLE TO ATTACH A DOCUMENT TO A AN sap OBJECT E.G. BUS222 AND ISUACCOUNT.
IF YOU'VE AN Example code that you can email me . it would be great.
thanks for the help.
geoge.

Hey,
If you are using Portal (not Framework), the below tag will do the trick
<wcdc:userProfile id="profileUserLink" immediate="false" text="#{security.userDisplayName}" shortDesc="#{security.userDisplayName}" xmlns:wcdc="http://xmlns.oracle.com/webcenter/spaces/taglib"/>
-K

How do I remove "web clips" links to web pages from my Home screen? Holding until jiggle does not produce "X" for deletion contrary to the ipod touch manual

How do I remove "web clips" links to web pages from my Home screen? Holding until jiggle does not produce "X" for deletion contrary to the ipod touch manual

Figured oout that I had restricted deletions of programs.
Settings->General->Restrictions-> (enter your passcode), Turn Deleting Apps ON
Afterward holding an icon until it jiggles will produce the X delete button.
You might want to turn Delete apps OFF after cleaning up.

Any restrictions on linking to web pages?

My book has numerous images that, when TAPPED, link to web pages. I do this by simply creating a very large "O" and setting it as a hyperlink to a particular web page. Then, I set the opacity to 0%, thereby making the "button" invisible. When the reader taps on an image, the hyperlink works.
However, does anyone know if there are restrictions on linking to web pages from an iBook? I realize that linking to a competitor page such as Amazon, will not be allowed.
Also, are there any copyright issues involving the creators/owners of a web page? Is permission needed? Seems any web page would want to be linked to - kinda the purpose of a site being live.

Soulhill said: "I don't think there are copyright issues with links as long as you aren't using images or text from other people's work"
I hope soulhill is right.
If any more 'legal' or emphatic info comes through on this topic, that would be great.
Re: DEAD LINKS...just gave me an idea...I could create my own web site section, just to reproduce/have the web articles I want to refer to -- articles mainly with FACTUAL INFO So like if I say in my Diet Book "corn fructose sugar" is bad for you I can point to four or five studies that say the same thing....
Isn't this like 'normal scholarship" ? Right?

Have to repetitively click links in web pages to open in Safari

I notice that in Safari I have to click links in web pages multiple time to get them to open. I watch the progress bar to see if it is loading and look to see if the circle is spinning and it is not. I can wait for a while and still nothing so it is not me being impatient. It does it just about all the time on Facebook and it really seems to go nutz when I click links that are pictures. I constanly empty/clear my cache/cookies and run Onyx to clean up the system and still no luck. The system is completely up to date and has snow leopard 10.6.5 I even put new mouse batteries in just to rule out a clicking problem with it. It's like Safari just does not respond and has to be told twice or more to get going. Does anyone have any ideas or tricks that might help.
Thanks

Hi and welcome......
Login to another user account on your Mac. Try Safari there.
If you experience the same problem, launch Disk Utility /Applications/Utilities
Select MacintoshHD in the Sidebar on the left then select the FirstAid tab. Click: Verify Disk
If Disk Utility reports errors, follow the instructions at this link. You will need your install disc. Using Disk Utility to verify or repair disks
Also, check System Preferences (Applications folder) - Universal Access. See if you have any accessibility features enabled, in particular, Mouse keys under the Mouse tab.
Carolyn

Can't get to links on web pages

I can't get to links on web pages , shrink or enlarge the web page or show the other web pages that are open?The back arrow does work

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

Editing pages created using dreamweaver with microsoft's visual studio express

Here's a quick, somewhat vague, question for anyone who might have an answer. Is there a trick to editing pages created using dreamweaver with Microsoft Visual Studio Express? The reason I ask is I recently finished a web site for my first client who now wants to make edits herself using the program she uses, that being Microsoft. I thought it would be as easy as pulling the html files from the server (or the usb flash drive i gave her), making changes and then putting them back to the server, but apparently she is having some problems. I'm meeting with her soon. I have no experience with any other programs, other than Adobe, so I don't know how much good I'll be in helping her. Maybe it's an easy question, maybe not. Any info appreciated. Thanks!

David wrote -
Dreamweaver template commands are all wrapped in HTML comments, so they
shouldn't cause any problems. They should simply be treated as comments.
However, the concept of editable and locked regions will be ignored.
Hi David, I meant the templates with the dwt extension, not the html files that are created from them. The full version of VS will recognize the dwt extension as 'Dynamic Web Template' but as this is a microsoft extension it does not recognize the code for editing and shows a large number of errors, (before anyone comments the dwt file extension is used by a number of other programs, all referring to a different file type).
PZ

Browser Issue all links in web pages do not work

Having some issue with Browser: all links in web pages for various sites do not work. Browser was working fine for year or so just sopped the other day

Are your links including "www" at the beginning? Is your default browser correct? If you have a backup just use that backup when your browser worked, to put it in its previous state, but first backup what you have so that you can upload your history ie if you still need it
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

How do I enlarge my web page to use the whole screen?

How do I enlarge my web page to use the whole computer screen?

Reduce dock size or hide same.
Also depends on what browser you're using all have full screen modes.
Safari :
http://support.apple.com/kb/PH11941
To enlarge an entire webpage so it uses the screen, click the arrows in the top-right corner of an app window:

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

How can I save the web page by using the Page Title as the file name ?

When i use Internet Explorer ,I can save the web page by using Page Title as the file name(as default no need to adjust anything). But when i use Firefox ,It can not use the Page Title to save as the file name. How can I do that like in Internet Explorer?

See:
*File Title: https://addons.mozilla.org/firefox/addon/834
*Title Save: https://addons.mozilla.org/firefox/addon/712

Removing links in web pages created using WPC

Similar Messages

Maybe you are looking for