Removing MBA from bag at airport...

When I carry my iPad on flights, I don't have to remove it from my carryon bag. Anyone tried the same trick with the MBA? PITA having to take it out of the bag. More chance that it will disappear after going thru the security procedure, especially if I'm nabbed for additional wanding while my MBA sits there waiting for me to reclaim it. Since the 11" MBA is very close in size to the iPad, I'm thinking maybe I can "skate" on this issue.

Wonder what it is about the iPad that allows it to stay in a bag while being x-rayred? About the only difference between an iPad and a MBA is the keyboard. That and maybe a pound more in weight.
It could be worse. In the beginning days of laptops, we had to "fire" them up to show that they were actually computers.
As to the TSA people, I think it's about power. About the only other place they can get this type of power is becoming prison guard.

Similar Messages

Can't get passed "Connect to iTunes" Screen after removing phone from bag of rice.

My phone recently had water damage, so I put it in rice for 2 days and then plugged it in. It showed the black screen with the apple symbol and then shut down and did this about 12 times. I put it back in the rice, and after taking it out after a few hours, it boot up normally to my "unlock" screen but then went to a screen saying to hook it up to iTunes. I then restored the phone to where it said it was complete but then it asked me to restore it again. I did that, and now it says it is unable to restore because of error. What should I do?

Ohh and it's only about a month old and it's a iPhone 4.

How do I remove mackeeper from my MBA (Yosemite)

I've seen MacKeeper many times in the past and to my knowledge, have NEVER installed or run the program. Somehow it's wormed my way on to my MBA to the point where the computer is almost unusable. Both in Safari and Chrome (which I almost never use), when I open any link, another tab appears with some MacKeeper BS or some other random webpage opens. I've removed MacKeeper from my Applications folder to no avail.
So much for Apple computers being immune to virus garbage. Is there some simple application that I can download that will purge my entire MBA of this problem. I did see a checklist that involved many steps that I didn't understand. I'm a bit worried that this MacKeeper may be recording my keystrokes and noting my login information to financial websites. I'm prepared to do a complete reinstallation of Yosemite if this will make this problem go away. Even that might not do the trick if there is some reference to this problem in the Cloud and just waiting for a future sync with a new copy of Yosemite.
Hope someone can help me in this matter. If I don't have to worry about the cloud, I'm prepared to trot down to my local Genius Bar and have them do a reinstallation of Yosemite. If do get it off my computer, is there anyway to prevent it in the future. To the best of my memory, this problem only happened after the installation of Yosemite.

Looks like I jumped the gun. However, my MBA is probably 85-90% better. I did run ClamXav on the SSD and did get some errors that I deleted. I then reformatted my external Time Machine and then did a full TM backup. I just completed a ClamXav on the TM and got the following errors from the supposedly clean SSD that I backed up shortly before.
Filename Infection Name Status
Application.app Osx.Adware.Geonei-9
Reset Search.app OSX.Adware.Omnibar
VSearchAgent.app Osx.Trojan.VSearchAgent
VSearchLoader.bundle Osx.Trojan.VSearchAgent
VSearchPlugIn.bundle Osx.Trojan.VSearchPlugin
Actually ClamXav found 15 errors, all the same as the list above, but in different places on the TM. This list repeated 3 times. I can't delete these errors on the TM like I could from the internal SSD. The previous errors which I didn't write down included some plishing errors.
Still, my MBA is running like a top. I'm going to keep my Apple Genius appointment this afternoon to see what they have to say about this. I'm now starting to think the only way out from these errors is to total wipe my SSD and the TM. Then start all over with a fresh copy of Yosemite and a new copy to my TM. At this moment, the only problem is intermittent popup ads in new tabs. Annoying.
The reason my last TM backup was in June is another story. That backup was with Yosemite beta. I was one of the early beta Yosemite testers and the beta ran great until one day when I did a beta update, it totally screwed the system. Computer wouldn't even boot. Went to see the Apple Genius and all they could do since it was beta was to reinstall Mavericks. For some reason, I couldn't use the TM with Yosemite beta and then Mavericks on the same TM disk. I had to reinstall everything (Word, Excel, etc, etc). I did have a few strange things going on with Mavericks the last 2 months, but nothing I could put a handle on. I did install the regular Yosemite the first day it came out, but I've never felt it ran as good as the beta version. So, this might have something to do with the present problem.
It will be interesting to see what the Genius says tonight. I was trying to wrap this up before we leave so that a good MBA will be waiting for me on return. I'm going on the cruise with only my iPad and iPhone.

My wife and I share our Mac OS 10.6.8 since downloading Skype on her account she can not stay connected to any web site she pulls up. I removed Skype from here account but it stll happens. What can I do to clear this up?

My wife and I share the same Mac OS 10.6.8 and since downloading Skype on her accout she came not asty connected to any web site for more than a few seconds. I have remove Skype from her account but not mine. I don't have the problem on my accout and I still have Skype loaded. How can I fix this problem?

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

Problem with remove task from schedule in PWA

In our environment problem with remove task from schedule by PWA.
Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
Problem appeared recently, earlier everything was OK.
Txn, Dariusz Moczyński

Hi Darius,
I'm a bit confused. You are now talking about 2 issues.
For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Removing genres from drop down menu in iTunes.

How can I remove deleted genres from the drop down menu in iTunes? This is not a question on how to remove genres from iTunes interface but from the drop down menu once a genre has been removed.

Ok, got link by pasting
To stream music from your computer to an AirPort Express, or to stream videos and music from your computer to Apple TV, click the icon in the bottom right corner of the iTunes application (verify that you have iTunes 10.2 or later)."
But , my iTunes, 10.5, has no such icon.

I Have removed conduit from safari but it still has pop ups

So i have remove the application conduit and geniome from finder, but pop up still occur. I even changed and remove conduit from search and extension. I still get pop ups.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How do i remove money from 1 itunes account to another ?

How Do I Remove Money From One Itunes Account To Another ?

See: More Like This To the right -->

I've had three laptops all connected to my itunes account, one was stolen, the other broke, how can I remove them from my itunes account?

So, in three years, after getting an iphone and an apple account I've had to replace a laptop twice due to theft or damage. When I link my phone to my new computer, it asks me if I want to connect the computer with the phone and I say yes, but you can only have 5 devices connected to one account, since one was stolen, and the other laptop broke, how do I remove them from my account??

De-authorise all, then authorise the one you still have.

How can we remove items from the VF04 list?

We have a long list of items in VF04 that, for various reasons (some process related, some due to errors), are not to be billed. We have looked at applying filters to the list but there is nothing really suitable to hide these individual documents e.g. we could filter out some dates where none of the items on that date are to be billed but other dates have a mix of items we want to bill and others we don't.
I have done a search of this forum but didn't find a previous topic with a quick and simple method to remove items from the list .
Is there a method, other than billing them or sorting each issue individually, to permanently remove individual documents from the VF04 list?
Thanks in advance for any help.
David

Hi,
David,
Download a list of Pending delivers doc form VF04.
Paste the list in T.Code : VL09 (Delivery reversal) and reverse the delivery.
Then go to T.Code: VL06G Select the list of deliveries that has been reversed, select/delete all un- wanted deliveries.
This way you can remove all unwanted pending deliveries forn Billing due list (VF04).
Thanks & Regards,
R.Janakiraman

What steps do I take to give my husband my older IPAD w/o removing him from my Apple account?

I recently bought a new IPAD2. All personal data and APPS were transferred from my older IPAD to my new one at the time of purchase. I'd like to give my older IPAD to my husband w/o removing him from my Apple acct. Apple's support does not provide instructions for my situation. Does anyone have suggestions as to what steps I should take?

What you might need to do depends upon how you want the old iPad to be for him.
If he will be using your iTunes account for any purchases/downloads from the store then he can continue to be logged in with your account in Settings > iTunes & App Stores. If not then log out of your account by tapping on your id in there, and he can then log in with his own account - any apps and other store downloads that you leave on the iPad will remain tied to your account, so only your account will potentially be able to redownload them and/or download updates to your apps.
To use his own account for Messages he can log out of your account via Settings > Messages > Send & Receive - tap on your id at the top of that screen and select 'sign out' on the popup. He can then log in with his account. Similarly for FaceTime : Settings > FaceTime (tap on your id on that screen). And (if he wants to back up his content to his own account) : Settings > iCloud > Sign Out
If you want to remove all content from the old iPad so that he can start afresh with it, then Settings > iCloud > Sign Out, and then Settings > General > Reset > Erase All Content & Settings

How to remove Userscripts from Greasemonkey without enabling Greasemonkey? (I have deleted files from user/gm_scripts/ didn't help)

I installed an addon named Chat Resizer, which is for Kongregate, restarted to finish the install and firefox would not open.
Clicked it and clicked it nothing, Opened Task Manager, Ended the firefoxes and tried to open it again but nothing again.
Started FF in safe mode, cannot remove chat resizer with greasemonkey disabled, trying to enable it to remove it firefox refuses to start.
Uninstalled greasemonkey, FF works as normal, install it and it freezes once more.
Removed files from user/appdata/roaming/mozilla/profile blah blah/gm_scripts which had files for all of my scripts in them,
Firefox still won't start, uninstall greasemonkey, works again, install, doesnt work even with files for the scripts gone.
Any more suggestions?

Hello,
I found this tutorial, i think must works:
[http://ooiks.com/blog/mousehunt-autobot/install-uninstall-user-script-on-firefox How to Install and Unistall User Scripts Greasemonkey]

How can i update/Remove Items from AR Invoice using SDK?

Hi All,
I have 1 problem with update or remove item from sales order. here is the source code of mine.
If inv.GetByKey(DocumentNumber) = True Then
                    inv.CardCode = cardcode
                    Dim ercode As Integer
                    Dim ind As Integer = 1
                    For Each drow As DataGridViewRow In gv.Rows
                        If gv.Rows.Count = ind Then Exit For
                        ercode = drow.Cells("No").Value
                        inv.Lines.SetCurrentLine(ercode)
                        'inv.Lines.ItemCode = drow.Cells("itemcode").Value
                        'inv.Lines.ItemDescription = drow.Cells("itemname").Value
                        inv.Lines.Quantity = drow.Cells("qty").Value
                        inv.Lines.Price = drow.Cells("price").Value
                        ind = ind + 1
                    Next
                    errorcode = inv.Update
                    If errorcode <> 0 Then
                        PublicVariable.oCompany.GetLastError(errorcode, errorsms)
                    Else
                        errorcode = 0
                    End If
                Else
                    errorsms = "Not found Invoice Document Number"
End If
After update, it error "[INV1.Quantity][line:1],'Field cannot be updated (ODBC -1029)'"
Does anybody know about this?
Thanks
TONY

Hi $riniva$ Rachumallu,
This is my mistake that not test manually in application.
Thanks
TONY

Best app to remove duplicates from iTunes 2014

Hi All,
I've been trying to research the best application to sort and remove duplicates from my iTunes library. I have over 7000 songs and iTunes built in duplicate finder doesn't look at the track fingerprint, which is useful for those songs which are labelled "Track_1" etc.
Has anyone reviewed any recent products? I was looking at TuneUp, but after reading so many negative comments, I've decided not to go down that path. I would prefer a program that did most of the work for me, due to the amount of songs. Happy to pay for a good product...
I do have MusicBrainz Picard, which has done a great job of tagging, but don't remove duplicates.
Thanks in advance :-)

Tune up is a great app. When they moved from version 2 to version 3 is when it went to crap and all heck broke loose. They shut their doors but they have since re opened and went back to developing version 2. I use that version and I am pretty happy with it as being an overall cleanup utility. I also use Musicbrainz and a couple of other utilities but in the end if you have an enormous library 20k plus then you are going to have a few slip through. I would probably go with Tuneup if I were you and a thorough third party duplicate finder. Dupe Guru's music edition seems to do a pretty good job.

How do I remove pictures from my iPhone that can't be deleted?

How do I remove pictures from my iPhone that can't be deleted?

What pics?
This is very vague.
If you mean pics that you synced to your iphone form your computer, then delete them the same way. Open itunes, connect iphone, select what you want to be on your iphone, sync.

Removing MBA from bag at airport...

Similar Messages

Maybe you are looking for