Removing Non-System Fonts

Hello,
I have messy fonts folders, too full.
I want to remove non-essential fonts and start again.
How can I best accomplish this?
Thanks in advance!
Lawrence.

"too full" for what?
This kind of exercise can be interesting - perhaps more interesting than you want. It will take time to figure out exactly which fonts you can get rid of. And you will most likely make mistakes and some applications will look strange or in worst case not start at all afterwards.

Similar Messages

Is there a way to prevent Mail from loading non system fonts?

For over a year, and a system OS upgrade, Mail has been taking 7 - 10 minutes to load all the thousands of fonts I have on my computer for graphic design. This started with Snow Leopard on my 2009 Mac Pro (10 GB RAM, 2 TB HDD). At first I didn't know why the computer was taking such a long time to finish boot up. So I reformatted the drive--zeroing it out. Then I installed Mavericks and reinstalled everything else. Finally I tried logging the system activity during startup and noticed that something to do with fonts took up the biggest chunk of this time. Because Mavericks loads any programs you leave running at shut down, I saw that if Mail had the fonts window open, the list of fonts would slowly grow, filling up with the many font families I use for my work. I called tech support for my font management utility but they say the fonts are not in the system and and shouldn't affect the system during startup. In the end I gave up and just go drink a few coffees after hitting the start button. It's like going back to the early days 25 years ago.
Can I stop Mail from loading any non-system fonts? I never use anything but the default font.

Hey SchenkerBob,
It is possible to disable non-system fonts temporarily for all applications using the Font Book application. This article explains how to do so -
Mac Basics: Font Book - Apple Support
In particular -
Disable and enable specific fonts
In situations where you'd like to prevent a font from being available in applications, but you don't want to completely remove the font from your Mac, you can use Font Book to disable the font.
In Font Book, click "All Fonts" in the Collection column.
Click the name of the font in the Font column.
Choose Disable "Font Name" Family from the Edit menu.
Since it might be problematic to have to disable each font individually, you can create a collection of fonts and disable the collection. See the article for how to create a font collection -
Organize fonts as collections
When working with fonts, you may discover that you use certain fonts frequently, but rarely use others. To make it easier to find the font you are looking for, you can organize your fonts into collections.
From the Font Book File menu, choose New Collection.
Type in a name for the new collection.
Click "All Fonts" in the Collection column.
Drag the fonts that you want from the Font column onto the name of your new collection in the Collection column.
You can then disable collections of fonts -
You can also disable or enable all fonts in a collection: Click the name of the collection in the Collection column, then choose Disable "Collection Name" or EnableCollection Name" " from the Edit menu.
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Problem with system font

Suddenly my InDesign "Control" menu is not showing the "degrees" sign (°) any more, but is showing the micron (µ) symbol instead. I wonder what I have done to make this happen? I have tried clearing the font cache, restarting, etc but it does not help. I'm wondering if I inadvertently removed a system font, but can't figure out which one it might be. Can anyone help?

Back up all data before proceeding.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
Start up in safe mode to rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If you still have problems, then from the Font Book menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

After removing system fonts and reinstalling fonts, FireFox will not start

After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
== This happened ==
Every time Firefox opened
== After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
The file names will begin with '''bp-'''
There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

How do I remove dozens of "protected system" fonts from my computer?

There are dozens of foreign language fonts installed on my system, (how they got there, I don't know, but I suspect the Cloud programs installed them at some time or another) and all they do is clutter up the selection list when I try to select a font to use. (No, the "hide foreign language" tool in Windows doesn't fix the problem.) I went to my Windows 7 control panel Fonts page and selected all the fonts I wanted to remove and hit Delete. Fine for some, but I kept getting a warning that the font I was trying to remove was a "protected system" font and could not be removed. Horse manure! I don't need them, I don't want them, and I want them removed from my system. So, how do I get these fonts "un-protected" so I can delete them forever from my computer??

Thanks for the link. It appears that the problem is with Windows, and not something the Cloud did to my computer after all. From what I can tell, people have been upset about this since sometime in 2009, and the only way to remedy it is to edit the registry and/or change the ownership of the files and grant administrator permissions to myself (somehow even more than I already have). It WOULD be nice if Adobe at least found a way to comply with MS's file hiding scheme so Photoshop and Dreamweaver and InDesign would not show all of the unneeded, unwanted, and unnecessary foreign language fonts that MS won't let us mere users delete. Thanks for the help, anyway.

When trying to upload a PDF to an interactive site I get the announcement:"The attached PDF file references a non-embedded font Tahoma. Please remove file, embed the font and reattach." How do I embed this, or in fact any other font ?

When trying to upload a PDF to an interactive site I get the announcement: "The attached PDF file references a non-embedded font Tahoma. Please remove file, embed the font and reattach."
I could not get rid of the Tahoma font in the WORD file.
How do I embed this, or in fact any other font ?

Thank you very much !
Indeed, I was unaware of the enormous number of options that can be selected when converting a WORD file to PDF.
I went thru the settings and found the right one for embedding the fonts.
Thanks again !
Oren

How do I programmatically remove a Windows system font with LabVIEW?

Is there a way to programmatically remove a Windows System Font?
Thanks!

If you know the font name, you should be able to just use the Delete function. On NT, Win2K, the fonts are stored in the WINNT\Fonts folder. I think you'll have to have admin rights to delete files there.

HELP! Some A**hole made me delete my system fonts...

...now my computer wont start! I just get a blue screen.
I was in a webex meeting with some software tech guy trying to get a program to work and he thought the problem was my system fonts. He deleted them and told me if I restart they would restore automatically... they didnt. obviously.
So I can connect to my computer from another computer over our office network and see the system folder but I cant add the fonts back in remotely because I dont have the priviledge from this other computer. Is there a way to override that? Can I type something into terminal that will disable all passwords or something. (I cannot go onto my computer and allow sharing or anything because I cannot start my mac. Unless thats something I can do remotely)
Can anyone help???

Easiest thing may be a FireWire Target Mode connection. Put any working Mac with the same version OS next to yours. It can be anything 10.5.x, doesn't have to be exactly 10.5.7. Connect the two Macs with a FireWire cable. With the working Mac on and ready, turn on the non working Mac and immediately hold down the T key. A big FireWire symbol will appear on that Mac's monitor and its hard drive will show up on the working Mac like any other removable drive.
Copy the system fonts from the working Mac to the FireWire mounted hard drive in the same location; /System/Library/Fonts/. Eject the non working Mac's drive as you would any other disk from the desktop. Disconnect the cable.
Power down the non working Mac by holding in the power button. Restart it and it should boot. Do a Repair Permissions with Disk Utility as the fonts you copied over will all have incorrect permissions.

Replacing a System Font

Hello,
We've been having some font issues and I think I'm close to clearing them up but have a question. We use FontAgent Pro and in that, we have a Helvetica font and a Helvetica Neue font. Both of which are also System fonts. I did the Restore Standard Fonts in Font Book. I've noticed that the System font versions of those fonts actually have less fonts in them than the versions in FontAgent Pro. (i.e. condensed black oblique, the whole thin family, etc...) So my question is can I replace the System Font versions with my FontAgent versions and if so, how do I do it without screwing up the system.
Thanks in advance,
Randy

So you've got full Type 1 PostScript sets you'd prefer to use all the time. There are some problems with this, but not impossible to deal with.
You may find the information in my article Font Management in OS X useful. In the section on minimum required fonts for the various versions of OS X, I have this information on Lion, which also applies to 10.8 and 10.9.
Previously, you could remove Apple's Helvetica fonts and permanently use Type 1 PostScript versions in their place. Not any more. Address Book is one app which will not launch if Apple's version of Helvetica is missing. So for prepress, designers or others who must use Type 1 PostScript versions of Helvetica or Helvetica Neue, it is now a requirement to copy Apple's Helvetica fonts to a non Fonts folder location, remove them from the System and ProtectedFonts folders, and then set up separate sets in your font manager for Apple's Helvetica fonts, and another for your third party Helvetica fonts. Then turn on whichever set you need at the time and turn the other set off. It's not perfect as you may need the the Type 1 fonts open, which will leave you temporarily unable to open Address Book until you disable the Type 1 fonts and turn the Apple supplied versions back on. There is no way around it. You simply can't have both on at the same time.
Instructions for copying, and then removing the Apple supplied versions of Helvetica are noted in section 5. That's pretty much what you'll have to do in order to have access to your full set of T1 PS fonts.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

System fonts conflict

Hi there, I own an AD agency with a few of these leopards running... I had 2 major issues:
1. adobe virtual printer pausing and unable to distill a PDF file out of word.
2. a terrible font conflict due to the overlapping presence of the Helvetica Neue in the system folder and in Suitcase Fusion where the "System Font ovverride" option is checked...
Spent the whole day struggling would be great to share with someone.

I share your pain, but haven't found a solution.
I have a design firm. I’ve installed Leopard on my Macbook Pro 17 without incident, as a pretrial before installing it on my working studio machines.
It appears that Leopard now includes Helvetica Neue and Helvetica (not so Neue) in the primary system fonts folder. The addition of Helv Neue to this folder is new with Leopard.
These fonts are now triggering eleven conflict message windows (one for each flavor of font) when Font Agent Pro is used to fire up the Adobe versions of these fonts (upon which I rely heavily in my design business). These warnings have to be closed one by one. Once my Adobe fonts are loaded, there are all kinds of anomalies in the Apple apps that use these fonts, including Safari, Mail many widgets, iCal and so on.
Any attempt to remove these fonts from the system folder results in their automatically being replaced. It’s as though the computer is telling me that “resistance is futile”.
We have hundreds of documents where Helvetica Neue or Helvetica are part of the design. Leopard will be a non starter in the design shop if we can’t beat this. I thought Apple knew they had a strong presence in the design industry. This is bone-headed planning on their part!

How to Delete Non-System State Backups in Windows 2008R2

Hello,
I am running a Windows 2008R2 server which uses Windows Server Backup to do the backups. We are using the backup-tool to create non-system state backups of the data-directories on this machine. The backup is done on a dedicated disk connected through iscsi
(to a Synology box). This backup disk has become too small and we have now replaced the Synology box with a bigger one. Here i created a new LUN again for the backup purposes.
Now for my question; The wbadmin.exe tool supplied with W2008R2 does not offer a way to delete the old backups. I know that in Win2012 (which we we also have running) I could add the new iscsi location and then (when enough backups are available on the new
target) use wbadmin.exe delete backup to delete the old non-system state backups; e.g.
wbadmin delete backup -version:08/07/2013-21:00
This (very undocumented) feature of Windows 2012 and higher works quite nice and is exactly what i am searching for on the W2008R2 machine; a way to delete the old backups (and under the hood delete the corresponding snapshots)
I've done quite a bit of research and it should be possible to do something similar in 2008 but then manually, The howto is described in the following link: http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx .
Basically it describes that you should use DiskShadow.exe to remove e.g. the oldest snapshot with a command like :
Delete shadows OLDEST \\?\Volume{7fc1871b-2e1f-11dd-a339-001e4fb7af35}
Windows Server backup (wbadmin) should then on the next run 'see' this deletion and update its list of available backups:
"You can perform the same steps manually to delete backups on demand. However, the backup catalog update cannot be done manually and it will happen instead during
the next backup."
I've done this on our box and it indeed removes the shadows from the list. However, in the Windows Backup 'dashboard' it still lists the backups as available. Also after a new backup has finished (according the the article this is when it should 'update'
its backup catalog). When I try to restore a backup from a date that i just removed it gives a nice message that this is impossible because the snapshot is not available (duh :)) ;
Unable to browse Local disk. The shadow copy of the backup stored on the backup destination cannot be found.
So it seems that the aforementioned method works; it removes the snapshot and frees diskspace, but it doesn't update the Windows Backup catalog. As a result the management tool (GUI) still lists the backups which are no longer available! How can i change
this? Is there any way to do this? I found one article which mentions that the Dashboard bases its screen on the Windows Logs and not on the actual VSS snapshots available:
http://forum.wegotserved.com/index.php/topic/23757-start-afresh-with-server-backup/ (WHS) In my situation however this seems unlikely because i don't have any logs that date back as far as my backups go.
In my opinion this is a real bug and it leaves us with a in-consequent backup schema. Does anyone have similar situations or even a solution to my problem?
Kind Regard, Martin

Hi Mandy,
Yes! I think i got my answer and I now get how windows backup works in Windows 2008 :-) It turns out that I dismissed some suggestions a bit too soon. The answer lies in the command mentioned earlier :
Wbadmin delete catalog
This command does delete all the backups from a perspective of the Windows Backup UI, but leaves the VSS snapshots intact. This means that the backups are still available, but you just can't restore them with the User Interface. In order to 'update' the
UI with the current available snapshots (which you can list with diskshadows list shadows all), you have to re-add the existing media on which the backups took place using the Wizard of the UI. It will then inform you that existing backups are available and
if you want to keep these for restore purposes. If you click 'yes', and THEN perform a backup ... All the current available backups will be shown in the User Interface :-)
So for my steps taken to change from one iscsi (iscsi1) to another (iscsi2):
- Add the 2nd iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Add more backup destinations -> iscsi2
- Remove the 1st iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Remove current backup destinations -> iscsi1
- Run some backups on the new destination. Old restore points are now still available. When enough restore points are available on the new volume iscsi2 start deleting old data from iscsi1 as follows:
- Run diskshadow
diskshadow
- list all the current snapshots
list shadows all
- remove all the snapshots of iscsi1 (repeat until all shadows are gone of iscsi1)
delete shadows oldest \\?\volume{yourvolumeid}\
- delete the windows backup catalog
wbadmin delete catalog
- Restart the windows backup UI and re-add your schedule on the new volume iscsi2. It will now ask if you want the keep the existing data for restore purposes; click yes.
- After the next backup only the backups of volume iscsi2 will be listed and everything is fine !
I Hope my post will help others with similar questions. It was quite a search before I understood the way it works. Basically as long as your VSS snapshots are still available and listed by diskshadow you still have the backups and you will be able to get
this in sync with the steps above (delete schedule and re-add originating targets containing the snapshots). After the next backup the UI will update itself.
(In my case someway along the way I lost my originating snapshots, but because I already had my new backup set it didn't bother me; It kept me from having to delete all 510 old backups :) with diskshadow)
Regard, Martin

Receiving non system disk error when trying to install Windows 8.1 full version on Mac Mini

I am trying to install Windows 8.1 full version on a Late 2012 Mac Mini using OS X 10.9.2 using boot camp.
The windows partion has been created but when the mac mini reboots I receive a Non System Disk error. Press any key to continue
Please could someone assist with my problem

Thanks for that information, I removed all the external devices except the Superdrive.
Ran Boot camp again, created the MS Dos partition, and the mac restarted.
Now I have received the "No bootable device -- insert boot disk and press any key"
Please help

"Non-System Disk" Boot Camp Windows 7 on 5K iMac

I've been trying to install Windows 7 as a Boot Camp partition on my 5K iMac for a few days now. It's driving me crazy.
I've tried:
Installing from multiple different USB devices – all USB 2.0, 16gb or 32gb. I've tried 4 different sticks now. I just tried a Sandisk 16gb as someone here pointed out none of theirs worked except their Sandisk drive, but no luck with that either.
Using multiple different ISO's, all x64 – all Windows 7 but different versions (Home Premium, Professional, Ultimate). These are all downloaded from the Digital River sources.
I contacted Apple Support and they advised attempting the Boot Camp setup while in Safe Mode. With this method, I was unable to even begin the process as the error message 'Must be Windows 7 or higher' comes up instead. I'm pretty sure this is just because I can't mount drives in Safe Mode.
Here's what happens:
Format the USB drive with 1 partition, set it to Master Boot Record, FAT32.
Run Boot Camp Assistant.
I leave all three options selected: create USB, download Windows software from Apple, and then create the partition.
Select the x64 Windows ISO.
Select the USB drive. Actually, there are no other drives connected, so it just auto-selects.
Hit 'go'. Let it do its thing. It asks for a password twice during the process, and takes about 20 minutes.
I then create a partition. I've been using 96gb, but have tried going up to 128gb to see if that makes any difference. Nope.
iMac reboots when that's done. It sits there for a little while with the backlight on and a black screen, then shows "Non-system disk. Press any key to restart.".
I hit my head on the desk a few times.
I try restarting the iMac and bringing up the boot manager to see what disks are available. There's only one: Macintosh HD. No recovery HD, and no 'Windows' drive I've seen on some other posts.
I restart the iMac and let it try booting normally again. This time, and all subsequent attempts, I get a "No bootable disk" error.
At this point I find some sorta-relevant post that recommends trying something else, so I remove the partition and try that – a different USB, a different ISO (of the same thing). I do not have a disk drive of any kind and cannot use Windows that way.
I've updated to the latest version of Yosemite, but that changed nothing. I've also tried inserting the bootable USB in my rMBP 13", but that doesn't show it as a boot disk either.
Not sure if maybe I'm missing a step? I've been following Apple's step-by-step guide in their Support pages.
If anyone has any experience with this problem, any advice would be greatly appreciated.

Ok. I've created a Boot Camp partition, and WININSTALL is the USB drive I've created via Boot Camp Assistant.
disutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         371.4 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                128.0 GB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *371.1 GB   disk1
                                 Logical Volume on disk0s2
                                 9559D7F7-15A3-43F4-9DB0-04AC36197E53
                                 Unencrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *16.0 GB    disk2
   1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk2s1
diskutil cs list:
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group CF98980E-1B0A-484F-9EFB-65B047F4DD7A
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         371418034176 B (371.4 GB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 4357254B-9237-4328-A90C-10C90ABA1107
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     371418034176 B (371.4 GB)
    |
    +-> Logical Volume Family 084DA53D-4F5B-4A6C-9A9E-047CA2895641
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 9559D7F7-15A3-43F4-9DB0-04AC36197E53
            Disk:                  disk1
            Status:                Online
            Size (Total):          371082489856 B (371.1 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (no decryption required)
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
sudo gpt -vv -r show /dev/disk0:
gpt show: /dev/disk0: mediasize=500277790720; sectorsize=512; blocks=977105060
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 977105059
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 725425848      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
725835488    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
727105024        512
727105536 249999360      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977104896        131
977105027         32         Sec GPT table
977105059          1         Sec GPT header
sudo fdisk /dev/disk0:
Disk: /dev/disk0 geometry: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 725425848] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [ 725835488 -    1269536] Darwin Boot
4: 0B 1023 254 63 - 1023 254 63 [ 727105536 - 249999360] Win95 FAT-32
Thanks for taking a look at this. I haven't been able to find a Windows 8.1 ISO to try as I don't have a license for that, only Windows 7.
Also, the USB stick I'm using now is a Sandisk Cruzer. I've seen it used elsewhere here with success, so figured it must be a suitable device.
Any ideas of what else to try?

System Fonts not showing in the font list

After I upgraded Adobe CC 2014.3.1.44, CL78964 on my Windows 8 (64-bit) computer, none of the system fonts are listed within Muse.
Understand two things, one. This used to work fine. I was able to see all of the system fonts, now only the ones on this list show up. Two, and fonts that I add via the web kit doesn't show up either.
I have uninstalled, then reinstalled. Nothing. I have also looked for the elusive fonts.db, which cannot be found on my system. Ideas?
Thanks,
Aaron

Hi Aaron,
Thanks for the prompt response. We are wondering if you could try a few other things that will help isolate the issue. Our theory is the issue might be related to OS user permissions.
Run Adobe Muse CC as an Administrator
Locate the "Adobe Muse CC 2014" shortcut icon in Windows Explorer
Right-click the "Adobe Muse CC 2014" icon and then click "Run as administrator"
When the "User Account Control" is displayed, do one of the following:
If you are logged on as a standard user, or if the user account control is configured to always require credentials, enter the appropriate administrative credentials, and then click "OK"
If you are logged on as an administrator and user account control is not configured to always require credentials, click "Yes" to start the application
After Muse finishes launching, create a new site and inspect the font drop-down
Verify "Local Store" folder permissions
Open a Windows Explorer dialog
In the address field enter "%appdata% and open the folder named "com.adobe.AdobeMuseCC.2014.3".The folder path should be similar to the following with <username> being the current OS user's nameC:\Users\ <username> \AppData\Roaming\com.adobe.AdobeMuseCC.2014.3
Right-click on the folder "Local Store" and select "Properties"
In the "Local Store Properties" tab, select "Security"
Select the current user name from the "Group or user names" list
Observe the section "Permissions for ...." in the "Local Store Properties" dialog. Does the user have full permissions (full control, modify, read & execute, list folder contents, read, write)?
Do you know if the Windows OS user account you are using is an administrator or standard user on your machine? You can find out by navigating to the following in Windows Explorer and selecting "Manage User Accounts":
Control Panel\User Accounts\User Accounts
Please let me know if you need any clarification on what we are asking for.
Thank you for your time in advance.
Regards,
Marc

Font is missing on the install prompt. How do I reinstall all standard macbook pro system fonts?

I recently installed a font pack and then removed the fonts shortly thereafter. Apparently the font that is used in the "install prompt" (the window that pops up for me to enter a password before installing new software) is now missing. The window pops up but everything is blank. How do I go about reinstalling all of the standard macbook pro system fonts?
Thanks!

I recently installed a font pack and then removed the fonts shortly thereafter. Apparently the font that is used in the "install prompt" (the window that pops up for me to enter a password before installing new software) is now missing. The window pops up but everything is blank. How do I go about reinstalling all of the standard macbook pro system fonts?
Thanks!

Removing Non-System Fonts

Similar Messages

Maybe you are looking for