Removing of remote activation

Hi friends,
I am activating ofg_gl_4 data source.
while i am doing it is giving error Remote data source can not be activated.
In r/3 i am activating this data source by using transaction rsa5.
But still it is giving error.
For that one i have to remove the remote activation in bi system.
Could you please any one tell me how to do it.
Regards,
ramnaresh.

Hi......
1)The remote activation is subject to an authorization check. Authorization object S_RO_BCTRA is checked. System administration must have assigned you the role SAP_RO_BCTRA in order for you to be able to activate the DataSources .This authorization applies to all the DataSources in a source system.
2)For remote activation, the D versions of the DataSources must exist in the BI system. They are replicated when you connect a source system and when you replicate to the BI system for an application component or a source system........
Check this..........
http://help.sap.com/saphelp_nw70/helpdata/en/d8/8f5738f988d439e10000009b38f842/frameset.htm
Hope this helps..........
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 29, 2008 12:12 PM

Similar Messages

Remote activation in different Clients of R/3 system

Hi
I am trying to do CubeServ BW case study from SAP Business Intelligence book. I am logged in BW system and the exercise requires transfer of Data Source Object from BI Content. When I try this step I am prompted with "Remote activation in the Source System E61CLNT050" message followed by login window. I have access to Client51 of R/3 system. But when I check for available source systems, E61CLNT051 and E61CLNT052 are available but there is no E61CLNT051. So I am stuck at this step.
Is there a way to add or (switch to ) E61CLNT051 and continue with other steps?
Thanks in advance.
Sundar

Hi Dili,
This is due to Source System Configuration done in TCodes SALE and SM59. You also have to note that while defining the systems, they should be defined as Trusted System so that the User Authentication screen doesnt come up.
Regards,
Tom.

How to remove planned inv active (yellow) flag in LS03N?

Hello,
I have planned inventory status (yellow status) created for the Bins. (LAGP- IVIVO). I can not create new physical inventory for this Bin. I am getting an error message- u201Cstorage bin already proposed for inventoryu201D
There are no stocks in the Bins and for some of the cases, even though there are stock in the bins, there are no pending inventory documents. But still there is yellow traffic triangle. Can anybody advice me, how to remove planned inv active (yellow) flag from storage bins Ls03n record?
Thnaks,
Milind

Hello Arakish,
Yes you right. When the inventory status is planned, there is pending inv document for it. I found out the resolution.
Yellow flag is automatically set by the system to make sure no two/multiple Inventory record exist for the same bins
(1) Just enter the Bin number in LINK/LINP table and find out the Inv record. The status should be cleared. If status is not cleared then we have to complete the PI procedure for the record. Then yellow flag from the Bin master LAGP-IVIVO will automatically removed.
(2) Another option is -
if we are very sure about the Bin stock and no TO is pending to confirm for the Bins, we can simply delete the INV record of the Bin. Yellow flag from the Bin master record, LAGP-IVIVO will be removed.
Thanks,
Milind

Business Content Installation with Remote Activation

Hi
During Business Content Installation, BI system attempts to do Remote Activation in the Source System
But in my case, it's searching for the datasources in the ERP source system instead of the CRM system
How do I get the Business Content to look into the right CRM system
Also, do I have to manually build the transfer rules of InfoSource to DataSource ? At the moment, I don`t have InfoSource automatically mapped to DataSource

Hi, before collecting the datasource to the right you have to select the source system by one of the following ways:
1) press Shift F7
2) click on the source system icon on top
3) goto menu Edit->Source system assignment
About your secod question check if the BI content already has a mapping defined if not you have to manually create the mapping.
Best Regards,
Brindha.

BI Content Remote Activation of Datasource - Transports

During the process of installing BI content in the Dev BW Environment, I am promted to login to the source system (CRM DEV in this case) so that the BI content datasources can be activated and replicated remotely. This process works fine.
The question I have is the following.
When I tranpsort all the BW BI content objects from our DEV BW environment to the BW QA environemt, do I still need to collect the activated datasources in the source system (CRM DEV ) and also transport them to CRM QA ?
Or does the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically when i transport the BW BI content objects from DEV BW to BW QA.
Thanks

I don't think, the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically BW QA.
In BI 7.0, the general practice is, first u have transport datasources from ECC Dev to ECC QA...Then replicate these datasources in BI QA.
In most of the cases, these replicated datasources becomes inactive in BI QA.
To over come this, after the replication, u should transport Datasources from BI DEV to QA, so that this DS overwrites replicated (inactive) ones from ECC.
Re: DataSource getting inactive after transport

Remote activation exception

Hi,
I have an rmi server registered with the rmi registry for remote activation. I get the following error when activated.
I started rmid in debug mode using the following command:
rmid -port 9242 -log c:\temp\rmid.log -J-Djava.security.policy="c:\temp\java.policy" -J-Dsun.rmi.log.debug=true -J-Dsun.rmi.server.activation.debugExec=true -J-Dsun.rmi.dgc.logLevel=10 -J-Dsun.rmi.dgc.logLevel=10 -J-Dsun.rmi.loader.logLevel=10 -J-Djava.class.path=C:\\temp\\test1.jar;C:\\temp\\wasspi_jmx_JSpiCola.jar;C:\\temp\\wasspi_JSpiCola.jar;C:\\temp\\castor.jar;C:\\temp\\xalan.jar;C:\\temp\\xerces.jar;C:\\temp\\log4j-1.2.15.jar
output:
May 12, 2009 6:46:13 PM sun.rmi.server.LoaderHandler loadClass
FINE: main: name = "sun.rmi.server.Activation$DefaultExecPolicy", codebase = ""
log.debug: recover()
log.debug: recovering from c:\temp\rmid.log\Snapshot.1
May 12, 2009 6:46:13 PM sun.rmi.server.LoaderHandler loadClass
FINE: main: name = "sun.rmi.server.Activation", codebase = ""
May 12, 2009 6:46:13 PM sun.rmi.server.LoaderHandler loadClass
FINE: main: name = "java.util.HashMap", codebase = ""
log.debug: reading updates from c:\temp\rmid.log\Logfile.1
log.debug: rdUpdate size 1436
FINE: RMI TCP Connection(2)-15.154.106.14: name = "java.rmi.activation.ActivationID", codebase = ""
May 12, 2009 6:46:20 PM sun.rmi.server.LoaderHandler loadClass
FINE: RMI TCP Connection(2)-15.154.106.14: name = "java.rmi.server.UID", codebase = ""
rmid: debugExec: running "C:\temp\JDK\bin\java.exe -Djava.class.path=C:\temp\test1.jar;C:\temp\w
asspi_jmx_JSpiCola.jar;C:\temp\wasspi_JSpiCola.jar;C:\temp\castor.jar;C:\temp\xalan.jar;C:\temp\xerc
es.jar;C:\temp\log4j-1.2.15.jar -Djava.security.policy=c:\temp\java.policy sun.rmi.server.Activation
GroupInit"
Tue May 12 18:46:21 GMT+05:30 2009:ExecGroup-0:err:Exception in starting ActivationGroupInit:
Tue May 12 18:46:21 GMT+05:30 2009:ExecGroup-0:err:java.io.StreamCorruptedException: invalid streamheader
Tue May 12 18:46:21 GMT+05:30 2009:ExecGroup-0:err: at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:768)
Tue May 12 18:46:21 GMT+05:30 2009:ExecGroup-0:err: at java.io.ObjectInputStream.<init>(ObjectInputStream.java:283)
Tue May 12 18:46:21 GMT+05:30 2009:ExecGroup-0:err: at sun.rmi.server.MarshalInputStream.<init>(MarshalInputStream.java:122)
Tue May 12 18:46:21 GMT+05:30 2009:ExecGroup-0:err: at sun.rmi.server.ActivationGroupInit.main(ActivationGroupInit.java:63)
Here is the server class:
collectorAndServerProps.put("java.security.policy", "c:\\temp\\java.policy");
collectorAndServerProps.put("java.class.path", "C:\\temp\\test1.jar;C:\\temp\\wasspi_jmx_JSpiCola.jar;C:\\temp\\wasspi_JSpiCola.jar;C:\\temp\\castor.jar;C:\\temp\\xalan.jar;C:\\temp\\xerces.jar;C:\\temp\\log4j-1.2.15.jar");
String javaCommand = "C:\\temp\\JDK\\bin\\java.exe";
String srcURL = "file:///c:/temp/wasspi_jmx_JSpiCola.jar";
ActivationGroupDesc.CommandEnvironment cmdEnv = new ActivationGroupDesc.CommandEnvironment(javaCommand, null);
ActivationGroupDesc groupDesc = new ActivationGroupDesc(collectorAndServerProps, cmdEnv);
ActivationGroupID groupID = ActivationGroup.getSystem().registerGroup(groupDesc);
MarshalledObject args = new MarshalledObject(bindName);
ActivationDesc desc = new ActivationDesc(groupID, "com.hp.openview.wasspi.collector.rmi.RemoteJSpiColaImpl", srcURL, args);
RemoteJSpiCola jSpiColaStub = (RemoteJSpiCola) Activatable.register(desc);
Registry reg = LocateRegistry.getRegistry(Integer.parseInt(rmidPort));
reg.rebind(bindName, jSpiColaStub);
RemoteJSpiCola remoteJSpiCola = (RemoteJSpiCola) Naming.lookup(url);
remoteJSpiCola.getData(argv);
Any clues?
Thanks,
Thiyagu

Looks like rmid.log is corrupt.
Your server class shouldn't do its own registration. That causes the rmid.log file to grow every time you start it. You should have a separate registration program that you only run once, and serializes the activatable stub to a file, and another program that runs every system startup that reads that file and binds the stub to the registry. That will conserve the size of the rmid.log file and also eliminate most writing to it, which is when corruption can occur.

Best Way to Remove Server from Active Directory

I was wondering the best practice to remove a server from AD according to Microsoft.
Option 1 :
Login to server and take it off the domain and put it into a workgroup
Then login to AD and make sure it is removed
Confirm removal from DNS
Option 2 :
Login to Domain Server and manually remove
Confirm removal from DNS
Thanks
Also the servers are running Windows 2008 R2

So if its just a file server, I would just go with option 1 to ensure the cleanest removal from Active Directory?
What would happen if I just removed it from Active Directory after powering it down? Still a clean result? Or is it considered best practice to take the server off the domain from the server then power it down and then remove from Active Directory?
Please let me know and also if you want me to clarify.
I am not sure if I understood you correctly but if you just right click the computer object in Active Directory and delete it you have to manually delete the DNS records as well or wait for scavenging period to delete the outdated DNS records.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

[svn] 851: Removed LiveCycle Remoting errors from BlazeDS.

Revision: 851
Author: [email protected]
Date: 2008-03-18 11:40:59 -0700 (Tue, 18 Mar 2008)
Log Message:
Removed LiveCycle Remoting errors from BlazeDS.
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/errors.properties

Hi,
I am facing exactly same issue. my application works fine on local and dev. however, when i deploy it on QA where TAM and clustering is in picture it throws connection failed error. Can you please help me on how to solve this issue.
Regards,
Sachin Patil.
[email protected]

Remove a remote lock

Hi! I lost my iPhone today while playing soccer. I used iCloud to remotely lock the iPhone and since my device is offline right now. As soon as I put on the lock, I realized that if the person who found my iPhone finds it locked, would they be able to connect to the internet? If they can't, could I remove the remote lock so it can connect to wifi manually and let iCloud track it? Also, my phone is under the AT&T carrier in the USA, and I am currently in China and will be staying there for a few months. I have no cellphone service so iCloud will only be able to track my iPhone via wifi.
Summarize this in bullet points for those who prefer a short explaination:
-Lost iPhone
-Remotely locked it
-Want to remove the remote lock but I do not have possession of the iPhone
-Can an iPhone connect to wifi even with remote lock on?
-No service (American carrier, in China, no international plan)
-Only able to track the iPhone via wifi
Thank you for reading this, I greatly appreciate you guys for helping me with this.

I am pretty sure the phone can connect to wifi if it is powered on. The remote lock just prevents the person from using the phone in any normal way. Of course they can just reset the phone completely and use it themselves without any of your data or settings. If you don't get it back soon I would assume this has been done and to be safe you should contact your carrier about discontinuing service, as well as changing passwords on accounts just to be sure.

Can you remove Apple ID activation lock?

Can you remove Apple ID activation lock?
IMEI/MEID:-****
ICCID: *****
EMAIL;-
mobail :- *****
iPhone 5s
Please Help me
<Personal Information Edited By Host>

Hi , Bo naïf :
There some one change my apple id password, i can't use my iphone 5s now I have the invoce & box for Iphone I need help me very ergent pls.
If u need my email for check it's : [email protected]
and my old password witch change it : Rs123456
you can send anthing for this email i know my password and it's not the sam apple id password.

Can the iphone be remotely activated if it is lost or stolen so it can be found using the find my iphone app

can the iphone 5 be remotely activated so it can be found using the find my iphone app. the phone has been offline since it was lost even though it should have had power. if it can be simply turned on by the service provider or by apple the rest i can do using the app

twhite55 wrote:
can the iphone 5 be remotely activated so it can be found using the find my iphone app. the phone has been offline since it was lost even though it should have had power. if it can be simply turned on by the service provider or by apple the rest i can do using the app
If you didn't enable the Find My iPhone function, then you can't track the iPhone. But it sounds like you did have it turned on, if you're seeing that it's listed in the Find My iPhone app or on icloud.com. But are you sure it's the same device? If you had a previous iPhone, and the name of both iPhones was the same, it would make it difficult to know which phone was which, even if they both were listed.
In any event, an offline device is not trackable. It could be offline because A) it has no power or B) it is not connected to the internet via cellular data or wi-fi.
Until it comes back online (and it may never), then it cannot be remotely tracked.

How to remove a network activity for one employee from the worklist?

Hi,
We are using the SAP project system where project resources are assigned network activities. In the worklist in the ESS timesheet, the assigned network activities are displayed for the employee. The problem is when several employees are assigned for a network activity, and one of them no longer should register hours on this activity. How can you remove the assignment (using dates etc.) for only one person so that the network activity no longer is present in his worklist in the timesheet?
Regards,
Petter

Well for this pernr you need to have a special coding to check for network and pernr.
other would be a simple way using cats0003 to validate data an employee records here you can have a individual check
for this pernr that he doesnt record for this activity and throw an error when he does! this is simpler

How can we remove the Calender,Active tasks,Recent activity and tags sectio

Hi
I want my landing page of my workspace (Keppel_Energy_EAP) to have only the WIKI home screen and want to remove the other sections like calender, Activie Tasks, Recent Activity and tags section.
Can you please let me know how i can remove these sections.
Thanks
Ashok

Hi,
The teamcollab client is not modifiable unfortunately - what you have on the page is always there.
Phil

UWL/Universal Worklist/Substitution - Removing the "Rule Activation" column

Hi SDNers,
From the Universal Worklist, it is possible to access the "Manage Substitution Rules" screen, in which one can manager substitutions over its colleagues.
I would like to remove a column in the standard "My Substitution Rules" table : the "Rule Activation" column.
Is there a way to do it ?
Regards

Michael, you can do this in the UWL but only with a 6.40 backend (ex. ECC 5) with a specific patch level (can not remember that patch level).
Before this you need to set these substituion in the R/3 inbox.
This being said it is only for workflow task routing. If I read your message correctly you want a manager to assign his authorizations (roles in R/3 or the portal) to a secretary. This is not supported in any standard SAP (or portal) scenario as far as I am aware.
Cheers,
D.

How to "remove" a remote control?

How can I make my MB forget a remote control for good?
Thank you very much!
Peter

Ok ok let's be civil here.
What I suspect you will have to do is pair the remote to the Mac first, preferably in a second room.
Then on the ATV complete the pairing process. If there is already a remote paired then if I recall correctly it should allow you through the menu to unpair it. Hopefully while pairing the 2nd remote to the TV the Mac will not see it. It may even be better to have the Mac completely off while pairing to the ATV so there is no way it can see the signal.
That's my best guess. I am running 10.8 and the options on the computer end seem to be removed. I don't think Apple is even including remotes with new desktops anymore.
I wish you the best of luck. Getting the remotes paired is a big PITA that I went through once. I think I finally gave up.

Removing of remote activation

Similar Messages

Maybe you are looking for