Removing of the Measuring  point and superior equipment

Hi,
Can any one tell me the steps to followed for removing and setting og deletion flag for measuring point and superior equipment.
I ran thr Tcode IK05 and deactivated it is it sufficient to do so.please help me.
Regards,
Yashwanth

hi
why you want to deactivate the measuring point ,if you have created a maintenance plan you can deactivate the maintenance plan so that system will not generate the maintenance call object.
or it is better you deactivate the equipment itself if you have done that you cannot able to enter further measurement documents for measuring point
regards
thyagarajan

Similar Messages

  • Measuring point and characteristics

    what are the measuring points and characteristics to be created for the thermal power station , sap plant maintenance

    Hi,
    Its based on the equipments in Power Station & Parameters to be measured for the Equipments. For example, for Boiler, Temperature, Pressure, Water Level, etc., will be measured.
    So here we need to create Characteristics for all these. For Boilers, Measuring points will be created for these characteristics.
    Equipments under Thermal Power stations could be Boilers, Transformers, Electric Generators, Coal Turbines, Condensers, etc., For each equipment, there will be different critical parameters to be measured on periodical basis.
    Create Measuring points for all of them.
    Regards,
    Maheswaran.

  • Functional module to Copy measurement points from one equipment to another

    HI,
    Please give some body function module to Copy measurement points from one equipment to another which is not assign to functional location.

    To Copy Measuring Points from one equipment to another , Go to transaction IE10 and copy all the relevant data that need to be copied Check the measuring point check box, it would copy the characteristic for measuring point to the newly created equipment and would create a system generated number for the measuring point. Both the measuring points would have the same characteristics and if they are attached to each other in a hierarchy then the measurement document readings could also be transferred from one measuring point to another.. You could use the following Function Module "EQUIPMENT_COPY" to copy the measuring point from one equipment to another if equipment has already been created.
    Regards...
    Edited by: Usman Kahoot on Jun 9, 2010 2:37 PM

  • Graph of Measurement points and a charecteristic vs time

    Hi SAP Masters,
    I am currently having a problem and I hope you can help me to solve this. I am trying to create a graph where I can compare one of  my Design data which is in my characteristic against the graph that i can generate from the measurement point vs time graph.
    How can I add the characteristic into this graph?
    And How does SAP know that which two column should be used for the graph? I know It can add a secondary y-axix but doesn't allow me to chose any data for that axis.
    My objective is to compare the measurement point data(movement) vs time with the design data(design movement). I can generate a column graph of movement vs time from the measurement points and I can display it over last couple of years. but if I can show design movement along with the measurement point movement then it is good for us to see if it is more than design movement stored in the classification tab of the Floc.
    thank you
    Edited by: sam1188 on Mar 16, 2011 2:24 AM
    Edited by: sam1188 on Mar 16, 2011 1:48 PM

    If you've been charged twice for the purchase (you didn't click on 'buy' twice and it appears twice on your purhcase history ?) then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Function Module to get usage by supplying measuring point and equipment no

    Hi,
    I want to know what is the function module to get the usage on giving the measuring point,equipment number and month.Thanks in advance.
    Regards,
    SGR

    Try this Function Module : ALM_ME_EQUIPMENT_GETDETAIL

  • Equipment Efficiency through Measuring Point and Counters

    Hi gurus,
    I am planning to get the efficiency of equipment by using Meauring points and counters.
    Against an Equipment I have created a Measuring point as counter.
    I am capturing Actual output of the machine as mesurment reading.
    In order to set the Target output i dont find a solution.
    I am expecting from all you guys to give me some solution to set the Expected or standard output against an equipment.
    so that i can compare the target vs actual as well as efficiency.

    The purpose of measuring points and counters is to genrate call objects at given overflow reading or points I dont think so that they can help in calculating the effiency in a way that this machine perfomence is let say 80% and other one is 70%.
    However you can maintain it manualy while entering the measuring points in format of % .
    Regards
    Iftikhar

  • Diffrence between Measuring point and Counter

    What is the difference between Measuring Point and Counter ?
    -Md

    Hi,
    _Measuring Point_
    Measuring points in the SAP System describe the physical locations at which a condition is described, (for example, Temparature and Pressure on a Boiler ). The characteristics associated with the measuring points which record the value can only be numeric characteristic. Measuring points are located on technical objects, in other words, on pieces of equipment or functional locations. For every measuring point there should be some characteristics to measure the reading.
    To enable you to differentiate more easily between the individual measuring points and provide them with a unit, you assign each measuring point to a characteristic.
    The parameters like Running Hours, Temperature, Pressure etc,, on equipments can also be mapped under measuring point.
    Counter:
    A type of measuring point, where a continuous reading is recorded (e.g. Milometer). In case the measuring point is a counter, it needs to be defined likewise.
    Counter readings are taken at counters at particular intervals and in particular measurement units.
    For Example, counter readings for kilometers driven or electricity used
    Regards,
    Krishna Mohan.

  • Unable to Inport Measurement points and Measure documents from R/3 to clien

    Hi,
    I am not able to import measuring points and measuring documents into the client device even after assigning the measurement point varaint in the back-end config.
    Please help!
    Thanks & Regards,
    Kanwar

    Hello Kanwar,
    I am thinking of two reasons at the moment.
    1. The equipments/Functional location which you had downloaded to your device were not having measurement points. If this is the case, you need to make sure that corresponding Equip/FL's are there on client (provided case 2 is not valid)
    2. The measurement points were not replicated. Hope you had checked MEREP_207 table for the required measurement points.
    Hope this helps.
    Best Regards,
    Subhakanth

  • Archieving the measurement points

    Hi friends
    I would like to know how to archieve the measurement point . Unfortunately we have created the counter in production system without requirement. Now we want to remove the same. But we are not finding the object in SARA to remove the same.
    Please help on this
    Regards
    Thenna

    Hi
    Why dont you go for Deleting for the Measurement point for Equipment or FL in change mode IE02 or IL02 then press Shift+F2
    If you created any Measurement documents for above Measurement Point the first you have to Archiev the them using Object PM_IMRG.Then go for deletion of Measurement point
    Regards,
    Rakesh

  • Functional location in Measuring Point and while creating M.plan or differe

    Hi,
    we found that functional location in Measuring point and M.plan functional location Measuring point are differrent, how to restrict that one ,we need automatically flow of functional location from measuring point to Maintenance plan.
    --Ganesh

    Hi,
    If you created the Measuring Point for the selected FL, then that measuring point will be populated automatically. If you have more than one measuring point, then you can select using Possible entries option.
    In this case, I think its not possible to restrict with configuration.
       IPRM0004 Maintenance plan / item: Customer check for time "SAVE"
    Use this user exit, while saving check for the functional location for the selected measuring point & give error message.
    Use tables IMPTT to get Object Number of FL. Use IFLOT to get the FL.
    Regards,
    Maheswaran.

  • Measuring points and counters

    Hi all,
    Can anyone please tell me the process of how to use measuring points and counters and in which scenario it will be used in plant.It would be great if anyone can tell the process with an example and also how to create measuring points and counters iin SAP  as  well.
    Thanks in advance.
    Regards,
    Vijay

    Measuring points are physical and/or logical locations at which a particular condition
    is described - for example, the temperature of coolant in a nuclear power station
    after an outflow from the pressure vessels, or the number of rotations per minute of
    the rotary blades of a wind-driven power station. Measuring points are located at
    technical objects.
    Counters are resources that enable you to represent the wear and tear of an object or
    the consumption or reduction in its useful life - for example, the mileage indicator of a
    motor vehicle or the electricity consumption meter of an electrically-powered system.
    Counters are located at technical objects.
    You can enter measurement or counter readings for each object to be maintained. This
    makes sense if you want to document the condition of an object based on measurement
    readings or if the regular maintenance of an object depends on its meter readings.
    You can also check these links:
    http://www.sap-img.com/plant/recording-measuring-docs-against-work-orders.htm
    http://www.sap-img.com/plant/measuring-points-questions-in-sap-pm.htm

  • HT203167 most of my music has the exclamation point and won't allow me to place songs in a playlist on a new ipod...why?                                     ?

    Most of the songs in my iTunes library has been tagged with the exclamation point and will not allow me to place those songs on a new Nano iPod I bought...why?  This is music I have purchased in the past.

    See here: iTunes displays a -69 error when syncing iPod
    You can use the disk diagnostic tool built into the iPod's firmware to test the health of it's Hard Drive.  See this post from another forum member turingtest2 on how to do this as well as what the resulting numbers mean.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • I believe firefox has updated itself recently and when it did so I have had items removed from the desk top and all my picturs and documents have been moved, my profile settings are now gone as well. Help please

    Hello, I think Firefox was automatically updated the night before last. I think this because I now am sent to the Firefox home page rather than where I was previously going. The issues that have come up are several. 1. Everything other than programs that were on my desktop have been removed. This isn't a big problem but has happened. 2. When I reboot my computer I get messages saying that the profile that has been used is either corrupted or there isn't enough security to open it or something like that. as a result it opens a generic profile and puts everything to default, when I close and reboot it has to do the same thing over again. 3. When I got this issue I tried to go to system restore and it had been turned off. I turned it back on and there were no past dates left to go back to. 4. all my photo files have been removed from the picture area, and all documents as well. I am able to search and locate them but now need to resave over 8000 items to the right places.
    Can anyone help me with these issues? Is there some place or service that can remotely access my computer and fix whatever this is?

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • How to delete the line between the last point and first point?

    How to delete the line between the last point and first point? 
    I want to draw a curve many times, from first point to the end point. and redraw from first point to the end point.But I hope update point by point. but between the end point and the first point,  there is a line. How to delete the line?
    the code is:
    CNiReal64Vector plotData(50);
    m_graph.ChartLength = 50;
    //m_graph.ClearData();
    for (int j = 0; j < 2; j++)
           for (int i=0; i<50; i++)
                   plotData[i] = ((double)rand()/(double)RAND_MAX)*6 + 4;
                   m_graph.GetPlots().Item("Plot-1").ChartXY(i, plotData[i]);
                   Sleep(100);
    Attachments:
    20150605142608.png ‏31 KB

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • Setting the white point and gamma

    I've heard that when calibrating your display you should set the white point and gamma to native. What is the difference between setting the white point at 65k and the gamma at 2.2?
    Thanks in advance for your time
    Rick

    The difference would depend on what the native points were to begin with.

Maybe you are looking for