Removing only part of a video in iMovie

How do you remove part of a video? QUESTIONFILLERQUESTIONFILLERQUESTIONFILLER

Good Tutorial for how Audio works for iMovie 08 is [here.|http://www.apple.com/findouthow/movies/imovie08.html#audioclips]
The same principle applies for iMovie 11.

Similar Messages

Rotating only part of a video clip

Hi,
I changed the position of my camera while filming a video clip. Can I now rotate only part of that clip in iMovie, so that all the frames are the same?
Thank you.

You can do this using TransformMovie, available here:
http://www.macupdate.com/info.php/id/21859
Also, MPEG Streamclip can rotate video while maintaining the aspect ratio as well as the interlacing when converting to DV, which is what iMovie prefers as an input:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
There is also a plug-in for iMovie from GeeThree called rotate/scale that might do the job:
http://geethree.com/slick/index.html
You will have to export the clip in question first, then re-import after correction.

How do i cut parts of my video on imovie HD?

Hi, I cant cut out a part of my film on imovie HD, I already tried cntrl T.. what should i do

How to split a video clip from iMovie Help.
Just played a little with this myself and came up with another way to approach it. From your list of clips tap once on the clip you want to insert, then adjust the yellow selection handles and click the blue arrow to insert. Repeat with the next section.
tt2

Why can't I rotate just part of my video in iMovie 11?

I recorded a video on my iPhone 4S and part way through someone turned it around. I have uploaded it to iMovie 11, hoping I can rotate just part of the video that was turned the wrong way, but I can't find a way to do this, as it rotates the entire clip. Surely there is a capacity to select part of the video and rotate just that? Any help appreciated.

split the clip into 3 parts
cmd-shift-S
turn the seperated part .....

Using only part of a song in iMovie?

I've been using iMovie for a while and it's great but one thing I haven't been able to figure out yet is an easy way to use just a portion of a song.
I want to use about six or seven different songs in my iMovie project, but only use certain parts of those songs (a 20 second portion in the middle of the song for example). I don't see any way to "trim" audio like you can with video or to specify to iMovie "only play from 1:20 to 1:50 in this audio track".
What I have been doing is cutting the portion of the song in QuickTime Player 7 and exporting as a new MP3, but there's gotta be an easier way than that I hope?

Good Tutorial for how Audio works for iMovie 08 is [here.|http://www.apple.com/findouthow/movies/imovie08.html#audioclips]
The same principle applies for iMovie 11.

How to make a link to play only part of a video

Is there a way to make a link to play only a part of an embedded video (from timecode - to timecode)?

Hello,
You can achieve this by using the rectagle tool. You can create a rectangle and place it in the background and change the fill color of the rectangle to "None".
It will make the rectangle transparent and you can also add a hyperlink to it.
If you want to have different hyperlinks to different pages (like you mentioned you want to be linked to next page) then you should not use Master pages as you need to add these rectangles to the pages and not master pages.
If you add the rectangles on Master Page then you can only add one link to it and that will not solve the purpose. And if you use Master page and add rectangle to page then the Rectangle will always be above the Master page content (Master page content is by default in the background and cannot be brought up).
Another option is to add rectangle to master page background and duplicate your master page to create multiple copies of it. After that you can add required links to the rectangles in the master page and associate the pages to the corresponding Master pages.
Hope this helps.
Regards,
Sachin

Play only part of a video and set seek bar accordingly

Is there a way to load and play clips from a larger video with FLVplayback in Flash CC AS3?
For example, if my flv video is 5 minutes long and has 10 cuepoints, how do I play only from cuepoint x to cuepoint y?
ALSO, I would like the seekbar handle to go to 0% at cuepoint x, and at 100% rest at cuepoint y. This way, the user can only seek through the current clip.
This will let me load the video one time, and then use different parts of it as needed.
I thought I had found a reference to flvplayback play() method that had a start parameter, but could not find examples.
System: Windows 7, Adobe CC.
Thanks.

you can use the seek method to start play from cp x. unless you're using a streaming server likefms or redhat, you must wait until the video has loaded up to cp x.
you can use a cp listener to check when cp y has been reached.
you can control the seekbar if you make your own. ie, you can't use the flvplayback seekbar.

Removing a part in a clip in iMovie '11?

Hello there! I was just finishing up a video, and I noticed a slight mistake in my voicing during my recording of the video. I wanted to remove it, and it was small, but there's no hope. It just deletes the whole clip, making me undo it, and making me clueless. Can someone help so I can get this on the web? Thanks!
~AppleFan17

To remove part of a clip, select the frames you want to delete by dragging. Then EDIT/DELETE SELECTION or right-click the selection and choose Delete Selection.
If however, you want to keep the video, but mute the audio for the clip, you can select the frames that you want to mute, and then drag the volume slider in the waveforms view to zero.
Alternatively, you could select the frames you want to mute, then right-click/Split Clip. The open the audio inspector and move the volume slider to zero.

Is there a way to remove only parts of audio in a clip (remove music but keep voiceover)

I've been given a promotional video to edit, with a voiceover and background music. The file I have is an MP4 file, and I do not have the separate pieces of the file (Video, audio, and music).
Is there a way to remove the music but keep the voiceover? I doubt there is..
Thanks

If the voiceover is in a narrow range of frequencies you might get lucky. You can use the Graphic Equalizer to reduce the volume of all frequencies except those that the voice is using. There may still be some music in these frequencies as well, but it is worth a try.
Select your clip and open the inspector to the Audio Tab. Under Audio Enhancements, you will see the word "Equalization". Over to the right you will see a small icon of a graphic equalizer. Click this and it will open the Graphic Equalizer.
That will bring up the Graphic Equalizer window. You can set the Graphic Equalizer to display 10 bands of frequencies or 31 bands. Choosing 31 bands will give you more control.
There are probably many other things you could try, since you have access to all the Logic Pro X synthesizers in FCPX, but that is the most straightforward.

Motion track only part of a video

Is there a way to only motion track a small sequence of a video? I have a 5 minute video, and after a minute a house shows up along the road. And I want a text animation to track that house for the 6-7 seconds you can see it. But if I add a 3D camera tracker, it adds to the whole video, and that takes forever...

Duplicate the item. Trim it. Use the camera tracker on the trimmed duplicate.
This is rather basic, so I'm guessing that you'd benefit from going through the basic getting-started materials before going further:
http://adobe.ly/AE_basics

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

FireWire is the only way to import Canon HV20 Camcorder videos into iMovie?

As a followup to my last post a moment ago tonight 1/30/08:
Is it true that I need a FireWire cable to import Canon HV20 Camcorder videos into iMovie?
If so, the Apple salesperson is wrong.
He told me last Monday that purchasing the new iLife 2008 (that contains iMovie 2008) would allow me to use my current USB cable.
Given I see NO FireWire port on my new MacBook Pro (bought in 8/2006), I don't see a solution.
Note the camera, an HD camcorder (the Canon HV20) did NOT come with a FireWire cable; it only came with a USB male plug on one side of the cable and the other is a small square-like male plug that connects to a female port on the Canon HV20.
Solution?
Thanks for any suggestions, Daniel

The USB cable is for importing still photographs. Not video.
The firewire 400 cable you need is one that goes from the 6 pin full size male connector to the small 4 pin form used for DV.
The cable plugs into the camera in a socket behind a plastic flap near the eyepiece. Its marked HDV/DV. The other end plugs into the MBP on the right-hand side. 4th from the back.

Imported video from imovie, when i try to play only have audio, screen is red and flickering

imported video from imovie, when i try to play only have audio, screen is red and flickering. new mac pro.

steved
Thanks for the reply with additional details.
In order to help you with the Elements Organizer 13 and Premiere Elements 13 issues, we need details of that video from iMovie.
You should be able to get the important details of the iMovie video by telling us the export settings that you used for the iMovie export.
Minimum information..
Video Compression
Audio Compression
File Extension
Frame Size
First, update Premiere Elements 13 and Elements Organizer 13 each to the 13.1 Update (See Help Menu/Update in an opened
Premiere Elements 13 project.)
We will be watching for further details in order to plan and carry out troubleshooting strategy.
Thank you.
ATR.

When I imported my mp4 video to imovies, it only shows the 1st frame of the video and not the rest...

When I imported an mp4 video to imovies, it only imported the 1st frame of the video - all thumbnails only showed the 1st frame.

It sounds like you have hidden the menu bar, for details of how to restore it see the [[menu bar is missing]] article. This article may also help - [[Back and forward or other toolbar items are missing]]

Removing only part of a video in iMovie

Similar Messages

Maybe you are looking for