Removing Oracle Services

Folks,
Does anyone know of a way to remove redundant Oracle services from Windows 2000.
Thanks in advance.

There is a utility called "oradim" in windows environment to manage services. Look at the help by typing "oradim/h" in the command prompt and follow the syntax.
Good Luck

Similar Messages

How to remove Oracle Services from Win NT Services

I had oracle 8i(8.1.6) installed and then tried to upgrade to 9i (9.2) but it got messed up as database upgrade only works from 8.1.7 to 9 and not from 8.1.6. SO I uninstalled both 8i & 9i and want to install it again a fresh but before doing this I want to remove the oracle services in Win NT Services.
How can I do this?
Thanks

Here are a couple of links to instructions as to how you might uninstall Oracle:
From this forum:
Re: HTML DB 1.6
From elsewhere on the web:
http://www.cryer.co.uk/brian/oracle/howto_orcl_uio.htm
http://www.louisville.edu/it/twotier/oracleinstall/uninstall/
http://www.orafaq.com/msgboard/windows/messages/1144.htm
Good Luck

Removing Oracle Services from Win NT Services

I had oracle 8i(8.1.6) installed and then tried to upgrade to 9i (9.2) but it got messed up as database upgrade only works from 8.1.7 to 9 and not from 8.1.6. SO I uninstalled both 8i & 9i and want to install it again a fresh but before doing this I want to remove the oracle services in Win NT Services.
How can I do this?
Thanks

go to register, type regedit on run prompt
register will open. go to hkey_local_machine then
go to software and click oracle option
and then find service name,
and delete the service.
otherwise you may stop the service by control panel
before installation of software
regards.

Oracle Services are not removed from system (10g, on Windows 2003)

Hi,
I haven't used Oracle on Windows Os before and not sure what to do.
Here is what happened
1- I installed 10g on windows 2003 server, created a database with service name OPER
2- I was unhappy with the installation and removed it.
3- then I installed Oracle 10g software again, creating a database again which has name IZROPER
now, there are two of every oracle service in the services.msci
service names containing the first db's (OPER) are still showing up in services, how can I remove them?
ORACLEDBCONSOLEoper
OracleJobSchedulerOper
OracleServiceOper
etc..

start -- run -- > regedit
In regedit mode --> HKLM -> SYSTEM -- currentcontrol set --> services --> here Oracle services are avilable , you can delete from here.

Oracle Service Removal

Hi all,
I have an issue where i cannot seem to remove an Oracle service from a Windows XP machine.
The XP machine was set up with the full Oracle Administrator Client to interact and develop with Oracle 9i on a windows 2003 server machine. Things all worked well until another application was installed that also set up a seperate Oracle Client. I have had to uninstall everything with the purpose of reinstall and configuring everything. Trouble is on the Windows XP machine an Oracle service called "OracleMTSRecoveryService" remains and i cannot seem to get rid of it prior to reinstalling the components.
I have tried using the command line regsvr32 with the /u switch but this does not work. i also tried using the Oracle installer application but the service still won't budge.
Any assistance would be appreciated. Thank you in advance.

Hi Alano
Have you tried the note id :
Subject: WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms
Doc ID: Note:124353.1
for windows unintallation ?
Edited by: Hub on Oct 28, 2008 12:43 PM

Removing an Oracle Service

I was asked to remove an oracle service and I did from the command line
while the database was open. I was then told it's a bad practice.
What is the implication of doing this?

I did from the command linefirst tell how u did it from cmd line.

Problem removing Listener Service in Clusterware 11g

It appears that I already have a listener service as shown below, and I am having problem removing this service so that I can create another. I know that I can just add a new listener service for each node, though if anyone would share some insight on how I can remove this listener service ofr Oracle 11g Clusterware with two node cluster, I would appreciate your insight. Thanks
rac1.respecti.com>./crs_resources.sh
HA Resource Target State
ora.rac1.gsd ONLINE ONLINE on rac1
ora.rac1.ons ONLINE ONLINE on rac1
ora.rac1.rac1.lsnr ONLINE ONLINE on rac1
ora.rac1.vip ONLINE ONLINE on rac1
ora.rac2.gsd ONLINE ONLINE on rac2
ora.rac2.ons ONLINE ONLINE on rac2
ora.rac2.rac2.lsnr ONLINE ONLINE on rac2
ora.rac2.vip ONLINE ONLINE on rac2
rac1.respecti.com>srvctl remove listener -n rac1 -l rac1
PRKO-2203 : Listener is running on node: rac1
rac1.respecti.com>srvctl stop listener -n rac1
CRS-0210: Could not find resource 'ora.rac1.LISTENER_RAC1.lsnr'.
rac1.respecti.com>

Hi, Is there any tnslsnr process running on the node. To understand the problem better, enable the debug trace for the .lsnr resource. You can enable trace by executing the following command as root.
crsctl debug log res "ora.rac1.LISTENER_RAC1.lsnr:5"
crsctl debug log crs "CRSRTI:1,CRSCOMM:2,OCRSRV:4"
Try to stop the listener.
Examine the log files under CRS_HOME/log/$HOST/crsd/* and CRS_HOME/log/$HOST/racg/*
Thanks & Regards
-Harish Kalra

Oracle service orcl not found in windows services

hello
i'm facing a very serious problem. MY server ORacleserviceorcl not found in services. all services currently up and running. but ORCL service not show there and my database is down how i start my database. i found this problem first time. plz help me how to Start oracle. my ORacle version 10g on windows server 2003

Niall,
Do you think that the OP should try the following command to re-create the service:
C:\> ORADIM -NEW -SID ORCLAs far as I have been able to determine, that command will not cause an issue, and will return an error if the service already exists.
To the OP: It is possible that a utility, such as HiJackThis, was used to remove the service, the Windows registry is corrupt, someone used ORADIM to delete the service, someone was hacking away in the registry and accidentally removed the entry for the service, or any number of other possibilities (I am not sure if MSCONFIG will remove a service when that program disables the service, but that might be another possibility, and dropping the database is another possibility).
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Edited by: Charles Hooper on Jan 22, 2010 10:42 AM
Added the note about dropping the database as a possible cause - see if the datafiles still exist.

Getting error "URI index 0 is not valid" in Oracle Service Bus

Dear Friends,
I am receiving an error "URI index 0 is not valid" while executing Customization File in Oracle Service Bus. I am not able to figure out why it is happening. Please help.
Thank you.
Regards,
Palak Mathur

AbhishekJ wrote:
Change the:
<xt:value>
<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>
<weight>1</weight>
</tableElement>
</xt:value>Section to:
<xt:value>
<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>
<tran:weight>1</tran:weight>
</tran:tableElement>
</xt:value>in your Customization File and try again.Hi Abhishek,
I did the same thing. Actually, the deployment team was getting this error and they called me up to find out. I analyzed and sent the following response:-
I was going through the Customization file. I removed all the elements from the file and started with only 1 envValueAssignments:-
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Weight</xt:envValueType>+
+<xt:location>0</xt:location>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>+
+</cus:envValueAssignments>+
The customization file got executed perfectly. Then I added another envValueAssignments and it worked fine as well.
Now, when I added
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Table</xt:envValueType>+
+<xt:location xsi:nil="true"/>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value>+
+<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>+
+<weight>0</weight>+
+</tableElement>+
+</xt:value>+
+</cus:envValueAssignments>+
+, I got the above error, ie URI index 0 is not valid. If you check each element then you will know that tableElement defines a namespace as xmlns:tran="http://www.bea.com/wli/sb/transports" which is neither being used by the node nor its child elements. Also the error in server logs was:-com.bea.wli.sb.transports.TransportException: URI index 0 is not valid.+
It stuck that we were doing something wrong here. I checked other elements in the same file and found that some of them were starting the node as <tableElement xmlns="http://www.bea.com/wli/sb/transports">. So, tableElements should be qualified with this namespace:-http://www.bea.com/wli/sb/transports. It was clear there was issue with qualified name of the element and hence I added the prefix "tran" and made entry as:-
+<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>+
+<tran:weight>0</tran:weight>+
+</tran:tableElement>+
When I executed the changed customization file it worked. I checked with few more elements and they all worked making me sure that this was the error.
So, the issue was that the OSB was not able to find any URI and for index 0 there was no URI available. Hence we were getting a weird error which was not at all user friendly. However, while making the OSb they must have thought that no one will make any manual changes (by hand in the file) and this error would be sufficient to tell that there is something wrong with the customization and we must regenerate the customization file.
Only solution that we do not receive this error in future is rather than making changes to the customization file manually we should use OSB console or scripts to replace the properties. Otherwise we need to be very careful while touching the Customization file.
Hope this helps.

Oracle Service Bus (OSB), Eclipse --- and statement of direction

Can somebody please explain what this means in: http://www.oracle.com/technology/products/integration/service-bus/docs/Oracle-Service-Bus-SOD.pdf
+...The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based console)...+
More specifically: what will happen to the Eclipse OSB plugin/workshop once the JDeveloper port is complete?
A) will it cease to exist and/or be terminated?
B) will it remain as is, without keeping the functionality in synch with new stuff in JDev?
C) will it continue to evolve side-by-side with JDev?
Thx,
-J.

I think it is clear that Oracle will remain commited to Eclipse in terms of deploying java applications to WebLogic, they will provide some plugins for some time to come. You will however see oracle specific products, such as OSB, Portal, etc removed from Eclipse and ported to JDev. The reason for this is that Oracle can release new releases within their timeframe. If Oracle rely on Eclipse to deliver some functionality before they can release new products then they will be doing their customers a disservice.
This statement in the SOD clearly states that JDev is the strategic platform and the Eclipse IP will be ported to JDev in the future:
Design-Time Environment
JDeveloper is the IDE of choice for SOA development at Oracle. AquaLogic Service Bus users have traditionally been using the web-based console to design, manage and monitor ESB flows. The web console is a key differentiator for ALSB (now Oracle Service Bus) and will therefore remain a primary design
environment moving forward.
The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a
one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based
console).
cheers
James

Oracle Service Bus download

The latest available Oracle Service Bus is Release 11gR1 (11.1.1.7.0) , I am looking for 11.1.1.6.0, where can I find it?
Thanks in advance.
Kranti

Hi,
I checked edelivery for the same, but it has been removed from there also.
Better you asked yours Oracle sales representative for the same !!
Abhinav

Implementation Of AIA on Oracle Service Bus

Hi all,
Anybody implemented AIA on Oracle Service Bus ?
How much time will it take to implement this compare to AIA on SOA ??
Can we refer this to client ??
How was the performance ??
Please refer to the URL below
www.oracle.com/us/products/applications/057298.pdf
Thanks
Phani

Anybody implemented AIA on Oracle Service Bus ?
We implemented AIA2.3 on OSB 10gR3 for one of the top 3 PC makers.
How much time will it take to implement this compare to AIA on SOA ??
Initial setup (customizing EOL and removing conflicts etc) will take some time and effort. Once that is done building new flows is comparatively faster than to do so on SOA Suite. Though it will also depend on the complexity of the flows, more complex flows will be easier to develop on SOA suite.
Can we refer this to client ??
It completely depends on the requirements of the client. If they have a lot of stateless and simple/medium complex services to be built, its a good idea to use OSB. If a lot of stateful and complex flows need to built it would be better to use SOA suite. Also, the features and use cases of SOA Suite and OSB are different, so you would need to do a comparative analysis and see which products features suit your needs better.
How was the performance ??
Unfortunately because of some bad decisions during design there were certain problems faced during performance testing. Since AIA schema definitions are capable of carrying a lot of business data of an entity (a product or customer or asset for e.g.) the message sizes may become huge which causes a lot of problems. If you keep message sizes in control and any XQuery or XSLT transformations to be simple and properly tuned you should not face much problems. If you have a lot of transformations it would make sense to spend on an XML appliance as well. The same would be true for SOA suite as well, even SOA suite wont perform well if there are complex transformations on huge messages.

REMOVE ORACLE PRODUCT IN NT

제품 : ORACLE SERVER
작성날짜 : 1997-06-16
REMOVE ORACLE PRODUCT IN NT
===========================
1. oracle 에 관련된 services 를 stop 한다.
- open the Control Panel in the Main program group
- open the "Services" icon
- scroll down and look for any Oracle related services, such as
OracleAgent, OracleWWWListener8888, etc
- under the "Status" column, if any of these services show "Started"
select the service and click "Stop"
- repeat until all Oracle services are shut down
2. registry 정보를 지운다.
- from the Program Manager pull down the "File" menu and select "Run"
- type REGEDT32 and click OK
- select the HKEY_LOCAL_MACHINE window
- open the SOFTWARE folder
- select the ORACLE folder and press the delete key to remove the
Oracle registry entries
- confirm the delete operation in the yes/no dialog box - select YES
- close the SOFTWARE folder
- now open the SYSTEM folder
- open the CurrentControlSet folder
- open the Services folder
- scroll down and select any Oracle related entries
- delete the entries one at a time, go slowly so the system can
refresh the display before you delete the next key
- close the registry editor
3. oracle 관련 icon 과 menu 삭제
- in the Program Manager close any Oracle program groups to make them
icons
- select an Oracle group with a single click, the pop-up menu will
appear
- click again on the icon, do not click on the menu, the menu will
disappear
- press the delete key, and confirm deletion of the program group
- repeat for all Oracle program groups
- open the "Startup" program group if there is one, and remove any
Oracle items in that group
4. computer 를 재기동한다.
- pay attention to any errors that would indicate that there are
still registry entries or that something is attempting to load
5. Oracle Home directories 를 삭제
- use File Manager to delete all the Oracle software
이렇게 하면 oracle 관련 system 이 삭제가 된 상태이며 다시 제품을
install 하면 됩니다.

I just went through this with Oracle support. The only solution is to replace the logo.gif file with 1X1.gif (copy 1x1.gif to logo.gif). That gets rid of the Oracle logo, but not the box, nor the copyright statement.
According to Oracle support this is by default and cannot be modified. They claim to be concidering this for a future release.
Let me ask, Are you running this as a portlet within a page? or as part of a dynamic page or calling it alone?
If you are calling it alone, run it as a full page, and choose a template that has minimal formatiing. I think it is called portal_template_example1 ??
If you are running it a portlet in a page, edit the page region and uncheck show portlet headers.
If you are running it as part of a daynamic page then you can run it by using the run as a stored procedure example (manage, show)
but nothing else io the dynamic page will show.
If you you have more questions, e-mail me.

Start/Stop remote oracle service

Is there anyway I could start/stop a remote oracle service? Please provide source code. Thanks!

HI,
Suppose ur Database resides on X machine
and u want to do remote login from y or z ,
follow the conditions and steps below
1) You need to install servermanager utility in ur remote machine
2)then u need to run orapwd.exe utility on ur remote machine with following command
"orapwd file=<full path name where u want to keep ur password file > password=<password> entries=<no of DBAs u want that password file to be accessed by>"
after this u need to change Parameter in initialisation file , u will find one entry called "REMOTE_LOGIN_PASSWORDFILE=NONE" u have to change it to " REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE" u can also control multiple dabases from this same password file for that u will have to change above entry to REMOTE_LOGIN_PASSWORDFILE=SHARED,after this
u need to pass following command "ALTER USER SYS IDENTIFIED BY <PASSWORD U LIKE > "
this will change the password of both INTERNAL and SYS, now if u want to give multiple user access to this file then simply u grant two roles to them "ALTER SYSTEM GRANT SYSOPER,SYSDBA TO <USERNAME>" (INTERNAL AND SYS have these roles by default) this will add that user to that file now that user can also go to servermanager.Now u can Connect with any of the user which u have added in passwordfile in ur machine, and can remotely start or stop database with following Commands "STARTUP" "SHUTDOWN" respectively
*Note -
1)Location of password file is OS specific
2)if ur using windows then u need to remove one entry in registry "DBA_AUTHORISATION =''
Have Fun

Uninstall Oracle Service Cloud Smart Client

Hi All,
This Application installed by going to the Web
http://<your_site>.custhelp.com/cgi-bin/<your_interface>.cfg/php/
admin/launch.php
This will create the All Programs> RightNow > RightNow (<your_site>). and uninstall option in Programs and Features.
Only thing is there is no application in registry?
("HKLM:\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\*\Products\*\InstallProperties"
,"HKLM:\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Installer\UserData\*\Products\*\InstallProperties")
So how do i uninstall by script?
https://docs.oracle.com/cloud/latest/servicecs_gs/FAMDG.pdf
As

HI Jrv,
They said there is no script and need to follow this? but can this script?
1. Stop all instances of the Oracle Service Cloud;
2. Remove all instances of Oracle Service Cloud
via Control Panel > "Program and Features"
- Click-Once web based installations will appear as "RightNow (sitename)"
3. Remove the files and directories from the below paths:
C:\Users\[USER_ID]\AppData\Roaming\RightNow_Technologies
C:\Users\[USER_ID]\AppData\Local\Apps\2.0
As

Removing Oracle Services

Similar Messages

Maybe you are looking for