Removing printer offsets from PDF pages

I accidently set up a printer page offset when creating PDF pages from Word Perfect X3. Is there a way to remove the offset, or do I need to go back to the original WP pages (which I can't find!)?

I recreated a page and made sure there were no offsets listed. The PDF page still prints offset. I found sources to recreate the page, displayed codes, and removed anything marked as offset. There is still an offset to the left when pre-print displaying either the source page or the PDF version.

Similar Messages

How remove embedded font from PDF

When I print to PDF on Mac OS 10.6.8 by default embed fonts to PDF-file. It add unnecessary bites to PDF-file (the file is huge size).
How to remove this option of fonts embedding? Or how remove embedded font from PDF file?

After opening dozens and dozens of linked files,I finally found the offending "empty line of text" in one of the AI files I placed in the INDD file. Open > Select All.... then check the font panel. With mixed fonts, it was empty, but if everything was the correct font, it was filled in. It was just one AI file.
I want to thank you all for your great ideas and for sharing your experience. Onward, now.

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

Will not print text from PDFs - all other print is fine - Using nitro reader - Win7- HP4255

Will not print text from PDFs - all other print is fine - Using nitro reader - Win7- HP4255

Mulga
Welcome to the HP Community Forum.
Have you tried asking your question on the Nitro-Reader Forum?
Nitro Reader Forum
If you would like to try using the Adobe Reader, you might find help here:
Manage Print Output with Print Preview
See the section on PDF files
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Printing to a PDF page larger than your FM document

When printing to a PDF page larger than your FM document, try this:
Use File > Print Book, set up your printer for Adobe PDF and 11x17 (or whatever your preferred page size is), and deselect Generate Acrobat Data. Turn on Registration marks if you like. Then, print, and the book should print, centered, on the larger page size.
Hope this helps somebody.

I found another discussion that provided a solution:
CutePDF for Mac or other compatible software
For instrucitons on use see:
http://basics4mac.com/article.php/print_to_pdf#here
Look for the program CUPS-PDF.
"cups pdf is like cute pdf but for mac
https://bitbucket.org/codepoet/cups-pdf-for-mac-os-x/downloads
after installing you need to go to settings, printer, add printer
full instructions here
http://basics4mac.com/article.php/print_to_pdf
pdfs go in /Users/Shared/CPS-PDF/{your account name}"
Thanks to Bob Harris and geagon.
Be sure to allow all software to be downloaded.
You have to locate the file where the prints are saved.
However you can put an alias up to it on your desktop.

How to remove a list from a page ?

I added a list to a page and then later decided it would be easier to add the list to page 0. Now I can't find how to remove the list from the page.
Edited by: Rene W. on Oct 6, 2008 1:52 AM

Ok sorry I understood you wrong then.
I tried to recontruct your problem and did the following things.
1. Created a new list in: Home>Application Builder>Application 305>Shared Components>Lists>Create / Edit List
2. Created a new region on page 2: Home>Application Builder>Application 305>Page 2>Create Region Type: List, Name:"test1"
3. Created a new region on page 1: Home>Application Builder>Application 305>Page 1>Create Region Type: List, Name: "test2"
4. Deleted region "test1" on page 2
5. List and region still survived on page 1. :D
Tobias

How i start printing report from 2nd page

When Press on Print button to print report, then it start from 1 page.
Is it possible that report start printing from the 2nd page....
Plz help if possible...
Thanks alot..

hi dear,
I think wht u do is place a "Form feed" char on the first line of your report
and make sure it has property "print object on" set to "first page"
so as and when u startyour printing it will make a form feed and your first page will
be printed with nothing and print starts from 2nd page....
Enjoy Oracle...

My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why? Removing the image from that page bright RGB colors are back.. hmm

My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why?
Removing the image from that page bright RGB colors are back.. hmm

Edit > Transparency Blend Space > Document RGB

Way to remove HTML tags from a page-scoped attribute using JSTL?

Hi,
I'm using JSTL 1.2 with Tomcat 6.0.26. Does anyone know of a way to remove HTML tags from a page attribute, "${myExpr}". I would prefer a solution that uses JSTL only, but ultimately whatever gets the job done is fine with me.
Thanks, - Dave

I'm sorry, I don't understand your requirement. What do you mean by "remove HTML tags from a page attribute"?
If you are dealing with a value of an attribute, it is most likely a String, and should be treated as such. The best approach would probably be java coding.

Remove Printer Name from Crystal Report

How can i remove the printer name from the Crystal Report so that the PrinterName property of the CRAXDRT.Report object in the RDC SDK is blank WITHOUT having the "No Printer" Option checkbox checked?
Here's the scenerio. When I first create a Report and don't go into Page Setup, PrinterName property is blank. If I go into Page Setup and explicitly select a printer, PrinterName property equals the name of the printer selected. If I check the "No Printer" checkbox in Page Setup, PrinterName property is blank. But if i go back in and uncheck the "No Printer" checkbox in Page Setup, the PrinterName property equals the name of my Windows Default Printer.

I'm still not sure what is unclear about my first question. And I'm not sure how any of the info you are requesting is going to make any difference in answering my question. And I'm not sure how your analogy fits here but ..
Version of CR = 11.0.0.895
CR Service Packs applied = None
Web or Win app? = Win App
OS? = Windows XP Service Pack 3
Development language? = Both Visual Basic 6 and C#.Net 2008
Method of CR files deployment = email the .RPT file to a client
Where were the runtime files downloaded from? = Runtimes are installed from Merge Modules donwload from SAP site
What is the version of the craxdrt.dll on the deployed box? = 11.0.0.893
So here are the exact steps so you can understand what is going on:
I have the Crystal Reports Application open side-by-side with my Visual Basic development environment in debug mode so i can step through the code using the RDC SDK.
1. I open the Crystal Reports Application and create a brand new report - "Test.RPT" and DO NOT go into Page Setup at all and save the report.
2. In my Visual Basic development environment, i run the code that will generate the report, Here's the exact code
    Dim m_crApp As CRAXDRT.Application
    Dim m_crReport As CRAXDRT.Report
    Set m_crApp = New CRAXDRT.Application
    Set m_crReport = New CRAXDRT.Report
    Set m_crReport = m_crApp.OpenReport("Test.RPT")
3. When i look at the PrinterName property in the CRAXDRT.Report object, it is blank.
    ie. crReport.PrinterName is equal to ""
4. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and check the "No Printer" option.
5. I go back into my Visual Basic development environment and rerun the code that will generate the report.
6. When i look at the PrinterName property in the CRAXDRT.Report object, it is still blank.
    ie. crReport.PrinterName is equal to ""
7. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and uncheck the "No Printer" option. I have NOT specified any printer, nor have i clicked the "Printer..." button to setup a printer....i have just unchecked the "No Printer" option
8. I go back into my Visual Basic development environment and rerun the code that will generate the report.
9. When i look at the PrinterName property in the CRAXDRT.Report object, it is now set to my WINDOWS DEFAULT PRINTER, yet i had not specified any printer.
    ie. crReport.PrinterName is equal to "
MyNetwork\MyPrinter"
PROBLEMS:
1. The client needs the report to go to the default windows printer of their machine
2. If the "No Printer" Option is checked, the Report does not print at all
3. If the report is set to MY default windows printer and i give it to the client, at times it takes upwards of to a minute for the Print Dialog to disply. As i've read on other forum posts, it appears Crystal is looking for MY printer on the clients machine and takes a minute before i realizes it can't find it and then sets it to the CLIENTS default windows printer.
4. The client believes it is unreasonable to wait a minute for the print dialog to appear ...and i agree.
5. I cannot change the code to use the Select Printer in the RDC SDK - it's a long explanation why but just suffice it to say that i cannot do this.
All i want to do is either:
1. Remove the Printer Name in the actual report from the Crystal Reports designer - basically undoing what Crystal did when i went into Page Setup.
2. Via the RDC SDK, be able to detect the "No Printer" option is selected. Checkign CRAXDRT.PrinterName equal to "" is not an option.

How can i print specific pages against searched word or name (in one print command) from 1000 pages

how can i print specific pages against searched word or name (in one print command) from 1000 pages

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

Can't print directly from web pages anymore-what setting needs to be changed?

After doing a recent update for the printer, the program jammed up and I was forced to uninstall then reinstall the printer. Since doing so, whenever I want to print a doc from a website, I right click to print, and a save page comes up-forcing me to save the document somewhere before I can print. I save to desktop, then can print from there. This is an extra step I never had to do before-could always print from the page. What setting do I need to change?

derbydoodle
Welcome to the HP Community Forum.
It sounds like the printer is not the "Default".
Print to Printer without First Saving to File
Not nearly as common, slightly possible, is that your browser is not picking up a properly set default printer setting.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

How to print report from JSP Page

Hi Everybody,
I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
Could anyone help me to solve this problem.

Hi Everybody,
I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
Could anyone help me to solve this problem.

Unable to remove sub-tab from portal page

Hi,
Get the following error when trying to remove a sub-tab from one of our portal pages;
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
Error while deleting page. (WWC-44130)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 4021
ORA-01403: no data found
ORA-01403: no data found (WWC-44082)
An unexpected error has occurred (WWS-32100)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
Unexpected error encountered in wwsec_api.remove_group_acl (ORA-01403: no data found
ORA-01403: no data found) (WWC-41417)
In advanced options for the tab, 'Inherit Access Settings From The Page' is selected.
Under page access settings, the 'From page template' option is selected.
Any ideas?
Cheers,
Chris

Please report this problem to Oracle Support. This is not normal behaviour.

Remove flate compression from pdf

Hi, i have a pdf file generated by a MicroStrategy tool
The pdf file has flate compression in it
When i open this file in wordpad i see this text:
/Filter /FlateDecode
The receiver cannot accept pdf files that has the above compression
How can i remove Flate compression from this pdf file?
Also, what is Flate, Inflate and Deflate with respect to pdf compression?
If this is not the right forum for this question, please guide me to the right forum
Thanks
-srinivas

You may try a forum for the MicroStrategy tool. It isn't a Adobe product.

Removing printer offsets from PDF pages

Similar Messages

Maybe you are looking for