Removing security settings when exporting

i've created a form in Adobe FormsCentral, then realized I won't be able to customize the fields to achieve what I want in Adobe FormsCentral. Now I'm trying to edit this form in a trial version of Adobe Acrobat Pro. I saved the form as a pdf in Adobe FormsCentral, and did not use the  "submission-enabled" option. 
But when I attempt to edit the form in Acrobat Pro by opening the form, then selecting Forms, Create, & Use current document, I am denied, with a security error that says "You cannot edit this file as a form due to it's security settings."
I can't find the security settings (or don't understand what I'm seeing) when I select Protection, More Protection... in Acrobat Pro. In fact, all Encrypt options are unavailable.  Document Security is already set to NO SECURITY. Of course, I found no way to remove the security from the doc beforehand in Adobe FormsCentral, either.
I'd rather not have to save the file as another format, then start from scratch, but I can handle it if I know there's not some trick I am missing.... is this a "mission: impossible" situation?
ECMelton

So awesome of you to ask! I had to report to Randy:It was operator error.
After I attached a file to his Email, I decided to test the problem again, one last time.
Lo & behold, no error that time! The difference? That time I had noticed the filename was different & located/opened the newly made copy.
When the new "copy of the file" is created, it is immediately closed. Of course you guys knew this, but I am a newbie, so I had been testing the tip on an identical -looking file, the original... because I didn't notice the difference in the file names, unfortunately. Dur. Dumb mistake on my part. Now I know that, unless I locate & reopen the newly created copy of the file, I'll wind up applying the tip on the original file.
Sorry for causing such a fuss!YOU GUYS ROCK!
Cid
Cid Melton
46.

Similar Messages

  • [CS4] Crossdomain security settings when exporting to SWF

    I'm using CS4 (and CS4 server) to export single pages to SWF files, then I need to embed those SWF to a parent SWF binary (written with Flex) and publish them on a web server.
    Everything works fine as long as both the parent and children SWF share the same domain and subdomain names.
    But if I want different domain names for parent and children files, I have to face the standard Flash security rules ("embedded SWF files can be accessed only if they have specific security settings").
    Using crossdomain XML files doesn't change anything, so what I need is to change the security settings directly inside the SWF generated by InDesign to allow him to be loaded by another SWF located on a different domain.
    Is there a way (by scripting InDesign) to change my SWF security settings ?
    I couldn't find nothing related to this subject in InDesign Object Model.

    To be more precise : what I need is an InDesign SWF file with System.security.allowDomain set to '*'

  • Flash CS 5.5 - best settings when exporting to .swf to reach widest audience?

    Hi Flash experts!
    I am a 2D illustrator and am relatively new to Flash (and love it!) and want to add some simple Flash animations (using my illustration) to my portfolio website. But I am having issues when exporting to .swf - I have emailed on examples of work to friends and colleagues to view (and check) and most have trouble opening the .swf files. In fact most can't open them at all! Is this more to do with your average (probably a pc user) person not having an up to date Flash player or to do with my settings when exporting?
    Can anyone advise me on how to best export to .swf to ensure the majority of people can open and play the file? Is this a problem just for a newby like me or a wider issue you Flash superstars deal with?
    Eagerly awaiting your advice!
    Thanks,
    Lisa in New Zealand.

    It may just be that they do not have a standalone Flash player to play the file.  Your better bet is to plant the swf on a web page and send the link to the page instead of the file(s).

  • Where can I give feedback regarding Aperture? I'd love to see the ability to removes EXIF data when exporting, especially to social networks.

    Where can I give feedback regarding Aperture?
    I'd love to see the ability to removes EXIF data when exporting, especially to social networks.

    Robert,
    For any normal Export, simply cilick the list of option and further click on Edit.  There deselect to include Metadata, and there will be no EXIF data exported.  But no copyright info either.
    The option already exists to do what you want.  Once a normal Export has deselected that, I believe even exports via plugin for say FB will not have it either.  I tested with an export to SmugMug after deselecting in an earlier ordinary export, and EXIF info was not transmitted.
    Ernie

  • Error Macro security settings when loading XML data on an RTF template

    Hello,
    I was getting the error "The macro cannot be found or has been disabled because of your Macro security settings" and gives me the suggestion when I click the Show Help button below. I tried the suggestion but was still getting the error.
    Any help will be greatly appreciated.
    Thank you
    This message can appear if:
    The macro was deleted from the template.
    The template was not loaded or referenced in the Templates and Add-ins command.
    The macro was turned off by the macro security settings of your system.
    If the macro security settings are not allowing the macro to run, you should confirm the origin of the macro to be sure that it can be trusted (contact the developer or the source for the macro). You can then temporarily enable all macros by using the following procedure.
    Click the Microsoft Office Button, click Word Options, and then click Trust Center.
    Click Macro Settings.
    Under Macro Settings, click Enable all macros.
    NOTE: Be sure to change this option back to its original setting after you have run the macro.
    If the macro is not accessible because the template is not loaded, click the Microsoft Office Button, click Word Options, and then click Add-Ins. At the bottom of the Add-Ins pane, select Templates from the Manage drop down list, and then click Go. In the Templates and Add-ins dialog box, click either Attach or Add. If the macro is not in the template, you may need to copy the macro from one template to another. Click the Organizer button at the bottom of the Templates and Add-ins dialog box to start the Organizer utility.

    I just had the same issue on MS 2010 (and I've been using publisher for years). I loaded a ton of office patches. metalink note has the solutions: 1450347.1
    for me personall it was a combo of removing the exd file and then running the Regsvr32 command they posted.

  • What settings when exporting from motion?

    What settings do I use when exporting scrolling credits from Motion.

    Exporting to where?
    If you are going back to FCP, save the Motion project and import that. It can be treated exactly the same way you would a video clip.

  • Security settings when I log in

    Hi,
    I just got a new MacBook which started up fine the first time I booted. However when I logged out and back in again I got a message saying that the file "/library/startupitems/timbuktustartup" had incorrect security settings. It then gave me the options of decide later (which I took), disable or fix??
    Can anyone help.
    Barry

    Presumablly you (knowingly) have Timbuktu installed to allow remote access to your Mac. You most likely also have it blocked in System Preferences> Sharing under the Services and Firewall tabs. Enabling it under the Services tab should automatically add it under the Firewall tab. I have no recent firsthand experience with Timbuktu so i'm not sure if it's installer provides it a separate listing under Services or if it falls under Apple Remote Desktop.

  • How to remove ' undefined exceptions', when export to excel within portal ?

    hi friends :
       when I export sth to excel within portal , there always appeared  'undefined exceptions' , sure . im not define excepthions but i do not wanna dislay it , coz it distoyed the the overall sense of the report , and others do not understand what's that mean
       i think it should be configured somewhere ?
       thanks very much :L

    Hello Bruce.
    I just want to clarify the situation that you are referring to...  Are you saying that when you log into the Infoview application and view a report, then click the "Export this report" button from the viewer.  Then it gives you all of the various "File Formats" that you can export to.  In that situation, you wish to only see PDF and Excel as options.
    If that is the situation that you are referring to, then there is no documented or supported way to remove the "File Formats" that can be exported to from the Crystal Reports viewer.  The Infoview application is a "black box" that is provided as-is by SAP BusinessObjects for customers to make use of.  For that reason, there is no documented way to make changes to it.
    Regards.
    - Robert

  • Cannot export Luminance settings when exporting TIF from Lightroom 4

    Hi All,
    A problem that's come up today!
    I use quite heavy Luminance noise reduction on my images as they are shot at very high speed ISO...
    I adjust this in L4, picture in preview looks as smooth as a babies bottom and perfect...
    I then export as a TIF file at Adobe 1998 and when I open it in Photoshop 5 the image is really noisy like I've not done the adjustments at all...
    I use a 17inch Macbook Pro with the lastest operating system, this is the second performace issue over the last few week (problems with LB too)...I export my files manually using a card reader as RAW files, from a Canon 5D Mark 3...
    Is it worth re-installing?
    Thanks!
    Sarah

    Hi Rikk,
    Thanks for the feedback :-)
    My Photoshop is actually CS4 rather than 5...sorry for the misinformation!
    I'm rendering 16 Bit Tiff's from Lightroom 4 into the above but it seems to only happen to images with a really blue hue...
    I'll upgrade to 6 via a trail and see how I get on...Thanks for the info :-) I'll get back to you...
    Cheers!
    Sarah

  • Remove Security Settings automatically for User account

    Hi all,
    In windows server 2003R2 -> AD users and computers -> (user)administrator account -> porperties -> security tag
    I have added group 'power user' and denied all permission for this group to manage this account.
    However, after about an hr, once I login again, the group was removed automatically in the security tag.
    Anyone have ideas about this?

    Hi,
    Please confirm, whether you have configured Restricted Groups setting in Group Policy?
    Checkout the below thread on similar discussion,
    http://social.technet.microsoft.com/Forums/en-US/a23a1dbb-19de-4b61-9548-1bf2ad062baa/domain-accounts-memberhsip-removes-automatically?forum=winserverDS
    Regards,
    Gopi
    JiJi
    Technologies

  • Remove 0 records when Exporting TXN data from BPC

    BPC Experts,
    I m trying to export transaction data from BPC from one MODEL , While exporting i wanted to ignore the records whose aggregated value is zero for the dimension member combination.
    Where i can restrict or set , EXPORT only for SIGNED DATA <> 0.

    Hi,
    Performance point of view optimization is required. As i mentioned in previous post lite optimization Closes the open request, compresses without Zero-Elimination and indexes the cube, and updates database statistics for the BW Info-Cube.
    As per my understanding there are no such prerequisite , but for safer side you can process all dimension of model.
    Also go through the links that are shared. If you required more details you can search on forum. There are lot of threads on lite optimization.
    Problem removing zeros in a model - BPC 10 NW
    http://scn.sap.com/community/epm/planning-and-consolidation-for-netweaver/blog/2014/02/07/lite-optimize--a-little-guide-to-the-big-things-you-should-know
    Full Optimization and Light Optimization In Detail.
    BPC Light Optimize Configuration
    Lite Optimize - A little guide to the big things you should know
    BPC optimization performance
    Light optimize in BPC 10

  • How to disable security warning "Your current security settings put your computer at risk"

    Hi,
    I wonder if able to disable the security warning bar at the bottom of the IE window.  I enabled the ActiveX control and plug-ins in the IE Option settings, this caused the  security warning "Your current security settings put
    your computer at risk" pop up whenever load the pages.  Is there a way can turn off this warning?
    Thanks a lot for helping!

    That is not an option for Koreans...
    In Korea, most of commercial, financial, or governmental operations need to be done on the Internet. In early 2000's, IE could not support high security outside US due to US laws (that was stupid, but happened) , so Korean sites developed cryptography ActiveX
    controls to circumvent it. Korean government made laws to force all sites to use those kind of ActiveX controls at that time.
    A decade has passed, and now the stupid US law has been repealed. But the cryptography ActiveX industry has become so strong (probably bribing the high officers in the government), that all Korean sites are still using those kind of ActiveX controls. And
    you know, they require Windows and IE. Recently some sites started to support other browsers, but still the majority requires IE and ActiveX.
    So, if you live in Korea, you have no choice but to use IE on Windows to get things done, and almost all sites popup ActiveX installation dialogues constantly. If you do not change the security settings, when you approve the installation, the whole site
    refreshes. That is time-consuming and frustrating. 
    To keep my mental heath, I deal with all Korean sites in a virtual machine. To avoid the refresh problem, I have changed the security settings from "prompt" to "enable". The "Your security is at risk..." banner at the bottom
    of IE is surely annoying. I hope Microsoft let us either remove that banner or remove the support of ActiveX controls altogether.

  • Graphical Modeler Security settings blocking error

    Hi,
    We are getting the error message 'Application Blocked by Security Settings' when we click the Graphical Modeler from Profile Set Creation view.
    Request you to suggest on how to fix this issue.
    Best regards,
    Azaz.

    Hi Azaz,
    Try un-installing Java on your desktop and re-install once again.

  • Very dark picture when exporting to .flv

    I´m getting a very dark picture when exporting flashvideo from FCP (VP6, 1000kpbs). Is there any settings when exporting I can do to avoid this?

    Solved! ProRes 4444 timeline.. 422 works fine!

  • Videos Blurry When Exported

    I am using CS4 and whenever I render a video it comes out blurry. I am using the default settings when exporting media.
    Any idea what I can do?

    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Maybe you are looking for