Removing Server 2000 DC and adding Server 2008 DC.

Removing Server 2000 DC and adding Server 2008 DC.
From: Server 2000 Sp4 (not leaving in place, no plans to demote)
To: Server 2008 Sp2 (will be a single DC and hold Global Catalog)
Single forest domain. Only one DC.
Problem: The old server 2000 is still a primary DC and the new server 2008 is not taking over.
Completed the following tasks:
NIC binding (connected NIC at top of list on new server)
New server is also DNS server. This role is working and it points to itself 127.0.0.1 and clients have been moved to use the new server for DNS, they are working.
New server has some shared folders. Clients are connected and this is working until we remove the old server, then they cannot authenticate to the mapped drive.
Both servers show the role of Domain Controller
Adprep /forestprep and /domainprep and /domainprep /gpprep were run on the server 2000 (as it was the existing DC) with a successful message. (not sure if enough time was allowed for replication)
All five Flexible Single Master Operations (FSMO) roles were transferred using GUI.
Schema Master, Domain naming master, Infrastructure master, RID master, PDC Emulator.
And have been verified. All roles transferred and the new server 2008 and new server is also the global catalog.
Then to verify new server is handling the role we unplugged the Ethernet cable from the Old server 2000, then went to client stations and re-started them and they would not find the new DC and connect to it.
On the new server when we opened active directory users and computers the domain did not appear.
Verified in DNS manager the A record and reverse pointer were correct.
For some reason the new server is looking to the old server. Even though all roles are moved over and DNS appears to be setup correctly it won’t exist independently.
What’s missing?
If something was missed or performed wrong, do we have to remove the roles and start from scratch? Or can we re-run adprep and walk the steps again leaving all as-is?

Hello,
as first step please post an unedited ipconfig /all from the old and new DC/DNS server and one problem client.
It seems that your installation from the new DC wen't well and as described in
http://msmvps.com/blogs/mweber/archive/2010/02/06/upgrading-an-active-directory-domain-from-windows-server-2000-to-windows-server-2008-or-windows-server-2008-r2.aspx Just check again yourself.
A DC should NEVER be shutdown or just disconnected from a domain, it MUST be demoted correct, as you ruin into replication errors in the event viewer without that steps and you will never be able to install a additional DC with using the same name.
See the end of my article about removal steps.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Similar Messages

SQL Server 2000, 2005 and 2008 migration

Hi,
we have to migrate SQL Server 2000, 2005 and 2008 to SQL Server 2014. Can anyone please help with some good links to migrate DTS and SSIS package from 2000, 2005 and 2008 to SQL Server 2014?
Regards,
Satendra Singh

Please see these links:
Migration SQL Server 2000 to SQL Server 2012
Migrating to SQL Server 2014
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Is Lion Server just Lion with added server tools ?

From what I am reading, buying Lion Server is just the same as buying Lion..... except you get some additional tools ? I have never had the server version of OS X before... but I always thought that installing the Server version (at least prior to Lion) would not always give you the same experience as purchasing the non-server version....
I only own mac laptops right now, but was thinking seriously about using one for a server..... and for $49 I can get it, install it as a server on one, and non-server on the remainder ?
TJ

Correct.
tj4shee wrote:
Oh...... so if I read this right.... the total cost for setting up a Lion Server is $29 for Lion + $49 for the server tools.... so $88 total....
I didn't catch on to that prior.....

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

SQL Server plug in and windows server 2008

Windows Server 2008
SQL Server 2008
JDBC drivers 3.0
I am trying to setup Oracle Grid to monitor the SQL Server instances and ive resolved most of the issues execpt i keep getting the following error when testing connection to SQL server
Warning
Failed to contact the target to be added. Following errors were received while testing the connection to the target. Update the properties accordingly, try Test Connection for testing the properties before saving.
1. MSSQLDetermineName_DynamicProperty - em_error=Could not connect. Error code = 0x8004100e em_error=Failed while connecting to WMI.
2. Response - Missing Properties : [provided_sql_server_name]
Ive read about the code and it says add the Microsoft namespace to WMI but then it says it only applies to SQL Server 2000.
These are my jdbc settigs:
jdbc url: jdbc:sqlserver://<servername>:1433
jdbc driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
History:
i was getting other errors before regarding wrong version of SQL Server installed so i downloaded the JDBC 3.0 drivers and copied the 2 files:
sqljdbc.jar and sqljdbcr4.jar
to <oracle_agent_home>\sysman\admin\scripts\emx\microsoft_sqlserver_database
after this i got the current problems
I think it may be a permissions problem with WMI or something connected around it.

Please review the installation documentation at:
* http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e16546/sqlig.htm
You will see that the sqljdbc_auth.dll needs to be copied only if you are using Windows Integrated Authentication on a 64 bit OS:
For the plug-in to establish connection to SQL Server instance using Windows Integrated Authentication mode, when deployed on a 64-bit (X64 or IA64) copy of Enterprise Manager Agent running on 64-bit Windows operating system, do the following:
Depending on the JVM version, copy the respective version of sqljdbc_auth.dll to the folder $AgentHome\sysman\jdbcdriver. If the directory does not exist, create it. The file sqljdbc_auth.dll is available as part of Type 4 Microsoft SQL Server 2005 JDBC Driver version 1.2 (after unzipping, you will find three files with same name, that is, auth\x86\sqljdbc_auth.dll, auth\x64\sqljdbc_auth.dll, and auth\ia64\sqljdbc_auth.dll)
o
For X64 version of Enterprise Manager Agent installed on X64 (Xeon or AMD) Windows systems, copy the file auth\x64\sqljdbc_auth.dll to $AgentHome\sysman\jdbcdriver (the dll file should be copied directly under the folder specified. No sub-directories should be created.)
o
For IA64 version of Enterprise Manager Agent installed on IA64 Windows systems, copy the file auth\ia64\sqljdbc_auth.dll to $AgentHome\sysman\jdbcdriver
Note:
· No manual step needs to be performed when the plug-in is deployed on 32-bit copy of Enterprise Manager Agent (running on 32-bit or 64-bit Windows).

SQL Server 2000 SP3 and jdbc type 4 drivers

hi all,
Has anybody had any problems using the type 4 jdbc drivers for SQL Server2000 after you upgraded the SQL Server 2000 with the latest Service Pack SP3 ??
Please reply..
cheers,
-Jer

hi shilohcity,
i did have some problem when i updated my sql server to sp3. The driver i was using.., Atinav's aveConnect3, didn't connect and was throwing exceptions. But after contacting their tech support, they provided me with an updated version, which they had released recently, and that solved the problem. I now believe that with that support, what i paid for that driver was worth it.'cos I would've been kept waiting for the updates if i was using some free driver with poor tech support.
see these links..
http://forum.java.sun.com/thread.jsp?forum=48&thread=351239
and another one
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=e4774458.0301270610.134f9e5d%40posting.google.com&rnum=1&prev=/groups%3Fq%3DaveConnect%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26selm%3De4774458.0301270610.134f9e5d%2540posting.google.com%26rnum%3D1
I do think this is some problem that could be solved by the driver vendors. the M$ 's TDS version is still a mystery as far as i know. and the driver should communicate with sql server using this TDS protocol. I dont know, may be SP3 would've introduced updates in the TDS protocol.. and the drivers should be able to support it, or new updated versions released.
It can happen in future too... M$ may change their stance anytime.. better be wise in choosing your DB Server and even be more careful while chosing JDBC drivers.
cheers,
-Jer

EAP with Windows 2000 client and IAS server

Several messages on this site point to peole using EAP on a Windows 2000 client and authenticating against an IAS server. I am running an Aironet 350 AP and trying to setup my Windows 2000 clients to use EAP only and authenticate against a Windows 2000 AD forest via IAS. The access point and client are on the latest firmware and drivers (12.0 for AP). I have two basic questions.
1. It is my understanding that by enabling Network-EAP as the only authenticaiton type that users will authenticate and then dynamic WEP keys will be used, greatly reducing the risks of compromised WEP keys while at the same time keeping the data encrypted.
2. Does anyone have a quick HOW-TO or point-by-point list of how to configure the Windows 2000 client to authentication using the Network-EAP method? I am currently running into a situation where no matter what I configure on the client, the IAS server reports and error with "Reason: The authentication type is not supported on this system." I also noticed that the "Authentication-Type" and "EAP-Type" fields shown in the IAS messages in the Windows 2000 Event Viewer log have the value "<undetermined>". Has anyone else run into this?

I'm having a similar problem. I'm trying to do PEAP and it appears that IAS is not handling the request properly. It keeps trying to log the user PEAP-##### in instead of setting up the TLS and then asking for Username, Pass, Domain. The IAS error message I'm getting is:
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = APPLY\PEAP-00097CFCD901
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name =
Authentication-Type = EAP
EAP-Type =
Reason-Code = 8
Reason = The specified user does not exist.
So if anybody has the needed settings for Win2k (SP3 and 802.1x patch) IAS it would be much appreciated.
Ben
Note: if I had PEAP-####### as a user in Win2k I get:
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = apply.org/Users/PEAP TEST
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type =
Reason-Code = 16
Reason = There was an authentication failure because of an unknown user name or a bad password.

Connecting to SQL Server 2000 with MS SQL Server Driver for JDBC

Hi,
I am brand new to JDBC . I have installed JDBC driver (for JDBC 2.0) from the Microsoft site and made relevant changes to the class path variable to include the driver paths, as suggested in the driver help documnnts. I have written a simple java code to register. But i get "class NotFound" error.
here's my code. What am I doing wrong? Thnaks for the help....
class Test {
     public Test() throws Exception {
          // Get Connection
     //     Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
     DriverManager.registerDriver (new com.microsoft.jdbc.sqlserver.SQLServerDriver());
          Connection conn = DriverManager.getConnection("jdbc:microsoft:sqlserver://SQL1:1433",myuser,mypwd);
          if (conn != null) {
               System.out.println();
               System.out.println("Successful Connection");
               System.out.println();
               // Meta Data
               DatabaseMetaData meta = conn.getMetaData();
               System.out.println("\n Driver Information");
               System.out.println("Driver Name: " + meta.getDriverName());
               System.out.println("Driver Version: " + meta.getDriverVersion());
               System.out.println("\n Database Information");
               System.out.println("Database Name: " + meta.getDatabaseProductName());
               System.out.println("Database Version: " + meta.getDatabaseProductVersion());
     } //Test
     public static void main(String [] args) throws Exception {
          Test test = new Test();
}

Hi MoD,
This is the exact command I used for compiling
C:\>javac -classpath "c:\java;c:\Program Files\Microsoft SQL Server 2000 Driver
for JDBC\lib\mssqlserver.jar;c:\Program Files\Microsoft SQL Server 2000 Driver f
or JDBC\lib\msbase.jar;c:\Program Files\Microsoft SQL Server 2000 Driver for JDB
C\lib\msutil.jar" c:\java\Test.java
To Execute I used
C:\>java -classpath "c:\java;c:\Program Files\Microsoft SQL Server 2000 Driver
for JDBC\lib\mssqlserver.jar;c:\Program Files\Microsoft SQL Server 2000 Driver f
or JDBC\lib\msbase.jar;c:\Program Files\Microsoft SQL Server 2000 Driver for JDB
C\lib\msutil.jar" c:\java\Test
In fact it kept thrwing up the Class Not Found error for the above commands.
But as U suggested I removed the classpath and executed both javac and java commands without classpath clause , and guess what it worked for the line
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
(i.e., it dint throw any exception like before). So can I assume that driver is successfully registered?
I tried using Jcreator for compile and run. But I got the same error msg as the commands given above with calsspath caluse. Is there a way around for this to make it work from an external editing tool like Jcreator apart from removing the classpath option from the JDKTool optional setting(doing this did not help for me)
Also one last favor: How do I connect with the trusted connection option? (i.e. it should use already logged in windows authentification login)
Thanks for all U'r help. I appreciate it very much.
Suma

Which is the best way to migrate the SQL SERVER 2000 Database to SQL SERVER 2003 Database?

Hi,
I need to migrate the Production database sql server 2000 to Sql server 2003, Please give me the best idea to migrate the database without any loss data, credentials and Objects.
Nandha Kumar

SQL server does not have any version named SQL server 2003 please check the version correctly it should be either SQL 2005,2008,2008 R2,2012
You can use the backup/restore to upgrade the SQL 2000 database to till SQL 2005,2008,2008R2
For SQL Server 2000 to 2012
First upgrade from SQL 2000 database to either SQL 2005, 2008 or 2008R2 and than upgrade it to SQL 2012.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/eaa1eb44-729f-466b-8233-cb768fbb4208/upgrading-to-sql-server-2008-from-sql-server-2000?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/4fac7511-2c75-46a0-802b-807dd26b12bf/sql-2012-will-not-convert-a-sql-2000-database?forum=sqlservermigration
And after migration to SQL 2005 or 2008, if you want to script the database than can generate scripts pick DB and check off "script all objects in the selected database".
http://blog.sqlauthority.com/2011/05/07/sql-server-2008-2008-r2-create-script-to-copy-database-schema-and-all-the-objects-data-schema-stored-procedure-functions-triggers-tables-views-constraints-and-all-other-database-objects/
You can upgrade from SQL Server 2005, SQL Server 2008, and SQL Server 2008 R2 to SQL Server 2012.
http://msdn.microsoft.com/en-us/library/ms143393(v=sql.110).aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Creating a connection pool using SQL Server 2000, Sun ONE Application Serve

Has any one succesfully configured SQL Server 2000 to work with Sun ONE Application Server 7 on Windows 2000 server service pack 4? I am embarking on a new J2EE project and I need to configure it as soon as possible.
The problem I am having is that, when I ping the data souce name, there is a connection error.
I have set the data source name and other details as follows:
Under JDBC, I have set the parameters for the connection pool as follows:
Data Source Name:      com.microsoft.jdbc.sqlserver.SQLServerDriver
Database Name:          jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=Test
User:               test
Password:          test
In the JVM settings page, I have set the prefix class path as follows for the location of the Microsoft JDBC
drivers that I downloaded as follows:
c:\microsoft\drivers/lib/msbase.jar
c:\microsoft\drivers/lib/msutil.jar
c:\microsoft\drivers/lib/mssqlserver.jar
Under JVM Options, there is a strange setting which I don't understand: perhaps this is the cause of the
connction error?
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
Please help????

I'm in a similar boat...
Trying to setup AS7 JDBC and followed the instructions on the link you provided and get the following exception. I kept the case the same, thinking 'setpassword" was incorrect, so I tried changing the property to "Password", but get the same exception but it points to "setPassword" instead.
SEVERE: RAR5041:Cannot get jdbc connection
com.sun.enterprise.repository.J2EEResourceException
java.lang.NoSuchMethodException: setpassword
at com.sun.enterprise.repository.JdbcConnectionPool.createDataSource(JdbcConnectionPool.java:243)
at com.sun.enterprise.resource.JdbcUrlAllocator.createResource(JdbcUrlAllocator.java:80)
at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
at com.sun.enterprise.resource.JdbcXAConnection.<init>(JdbcXAConnection.java:74)
at com.sun.enterprise.resource.Jdbc10XaAllocator.createResource(Jdbc10XaAllocator.java:94)
at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:170)
at com.sun.enterprise.resource.JdbcDataSource.internalGetConnection(JdbcDataSource.java:241)
at com.sun.enterprise.resource.JdbcDataSource.getConnection(JdbcDataSource.java:98)
at com.rvi.database.jdbcConnection.getConnection(jdbcConnection.java:93)
at com.webapp.database.ArticlesDAO.selectByYear(ArticlesDAO.java:102)
at com.webapp.actions.ArticleAction.list(ArticleAction.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)

SQL Server Express 2014 and SQL Server Agent

Any chance SQL Server Express 2014 supports SQL Server Agent. I have a home weather database and I have to import Data every 30 seconds.

Any chance SQL Server Express 2014 supports SQL Server Agent. I have a home weather database and I have to import Data every 30 seconds.
SQL server 2014 express does not have SQL Server agent.You can take help from creating batch files and running them thorugh CMD.windows scheduler will let you schedule it.
How to schedule and automate backup in SQL Express
Free job scheduling toll for SQL Express
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

PORTAL SERVER 6.0 and Directory Server 5.1 existing

I have one istance on sunone directory server 5.1 . I want install secure portal server 6.0 and i want use this directory server? . In the installation manual there are't this procedure.
When I install the portal I select the installation with existing ldap and the portal server is installed . When I started the portal server this don't work.
Thank's

Go to Identity Server v5.1 documentation. It's well documented there. In two words, after you installed it this way, you have to apply 'existing.ldif' file to create ACIs and roles, then to create all services.
Please check existing.ldif before you will apply it. Depending on your DIT, it may be quite broken. Don't forget to change ums.xml to match your schema.

Java 5 Hotspot VM crash on Windows 2000 Server, 2000 Pro and XP pro

Hello,
We have had the following recurring error on different machines with Java 5, running one of our mission critical systems.
It seems to be a problem connected with AWT and "SafepointBlob" whatever that is.
Has anybody seen this kind of thing before? Does anybody know what the solution is?
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_FLT_STACK_CHECK (0xc0000092) at pc=0x00a70b98, pid=3232, tid=1636
# Java VM: Java HotSpot(TM) Client VM (1.5.0_05-b05 mixed mode)
# Problematic frame:
# v ~SafepointBlob
--------------- T H R E A D ---------------
Current thread (0x38f73788): JavaThread "AWT-Windows" daemon [_thread_in_Java, id=1636]
siginfo: ExceptionCode=0xc0000092, ExceptionInformation=0x00000000 0x3921f8d8
Registers:
EAX=0x00000000, EBX=0x00000000, ECX=0x066f7898, EDX=0x009c1e34
ESP=0x3921f8d8, EBP=0x3921f9b0, ESI=0x00000001, EDI=0x00000000
EIP=0x00a70b98, EFLAGS=0x00010206
Top of Stack: (sp=0x3921f8d8)
0x3921f8d8: 00000000 00000024 0006f284 00000000
0x3921f8e8: 00000024 0006f284 0006f1bc 77fcae15
0x3921f8f8: 00230778 00000000 38f73788 38f65540
0x3921f908: 0006f284 32f77c08 00000000 00230178
0x3921f918: ffff1372 ffff0000 ffffffff 00000000
0x3921f928: 00000000 00000000 ffff0000 ff98e0a0
0x3921f938: ff98e0a0 0000ffff 00000000 ffff0000
0x3921f948: 00df009f 00fe0097 009fffff 009700df
Instructions: (pc=0x00a70b98)
0x00a70b88: 83 ec 6c dd 34 24 9b d9 24 24 83 ec 40 dd 1c 24
0x00a70b98: dd 5c 24 08 dd 5c 24 10 dd 5c 24 18 dd 5c 24 20
Stack: [0x391e0000,0x39220000), sp=0x3921f8d8, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
v ~SafepointBlob
J sun.awt.AWTAutoShutdown.setToolkitBusy(Z)V
J sun.awt.AWTAutoShutdown.notifyToolkitThreadFree()V
v ~StubRoutines::call_stub
V [jvm.dll+0x8295c]
V [jvm.dll+0xd752e]
V [jvm.dll+0x8282d]
V [jvm.dll+0x89917]
C [awt.dll+0xbd875]
j sun.awt.windows.WToolkit.eventLoop()V+0
j sun.awt.windows.WToolkit.run()V+69
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
V [jvm.dll+0x8295c]
V [jvm.dll+0xd752e]
V [jvm.dll+0x8282d]
V [jvm.dll+0x8258a]
V [jvm.dll+0x9d476]
V [jvm.dll+0x1042ae]
V [jvm.dll+0x10427c]
C [MSVCRT.dll+0x85bc]
C [KERNEL32.dll+0xb388]
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x38fee788 JavaThread "Thread-120" [_thread_blocked, id=2616]
0x38e48478 JavaThread "Thread-119" [_thread_blocked, id=2620]
0x38e47668 JavaThread "Thread-118" [_thread_blocked, id=2624]
0x38e46b28 JavaThread "Thread-117" [_thread_blocked, id=2628]
0x38e45d98 JavaThread "Thread-116" [_thread_blocked, id=2632]
0x38c085d8 JavaThread "Thread-115" [_thread_blocked, id=2636]
0x38c07870 JavaThread "Thread-114" [_thread_blocked, id=2640]
0x38c06e18 JavaThread "Thread-113" [_thread_blocked, id=2644]
0x3a02f5a0 JavaThread "Thread-112" [_thread_blocked, id=2648]
0x3a02f418 JavaThread "Thread-111" [_thread_blocked, id=2652]
0x38e51d60 JavaThread "Thread-110" [_thread_blocked, id=2656]
0x38e4fb80 JavaThread "Thread-109" [_thread_blocked, id=2660]
0x38e4efb8 JavaThread "Thread-108" [_thread_blocked, id=2664]
0x38e4e150 JavaThread "Thread-107" [_thread_blocked, id=2668]
0x38e4d588 JavaThread "Thread-106" [_thread_blocked, id=2672]
0x38e4c720 JavaThread "Thread-105" [_thread_blocked, id=2676]
0x38e4bb58 JavaThread "Thread-104" [_thread_blocked, id=2680]
0x38e450f8 JavaThread "Thread-103" [_thread_blocked, id=2684]
0x38e44d58 JavaThread "Thread-102" [_thread_blocked, id=2688]
0x38e43410 JavaThread "Thread-101" [_thread_blocked, id=2692]
0x3a01f418 JavaThread "Thread-100" [_thread_blocked, id=2696]
0x38e48790 JavaThread "Thread-99" [_thread_blocked, id=2700]
0x38e407f8 JavaThread "Thread-98" [_thread_blocked, id=2708]
0x38e3fc30 JavaThread "Thread-97" [_thread_blocked, id=2712]
0x38e3edc8 JavaThread "Thread-96" [_thread_blocked, id=2716]
0x38e3e200 JavaThread "Thread-95" [_thread_blocked, id=2720]
0x38e3d398 JavaThread "Thread-94" [_thread_blocked, id=2728]
0x38e3c7d0 JavaThread "Thread-93" [_thread_blocked, id=2732]
0x38e3b968 JavaThread "Thread-92" [_thread_blocked, id=2736]
0x38e3ada0 JavaThread "Thread-91" [_thread_blocked, id=2740]
0x38e39ff8 JavaThread "Thread-90" [_thread_blocked, id=2744]
0x38e36b90 JavaThread "Thread-89" [_thread_blocked, id=2748]
0x38e35d70 JavaThread "Thread-88" [_thread_blocked, id=2752]
0x38e2e768 JavaThread "Thread-87" [_thread_blocked, id=2756]
0x38e2dba0 JavaThread "Thread-86" [_thread_blocked, id=2760]
0x38e2cff0 JavaThread "Thread-85" [_thread_blocked, id=2764]
0x38c09018 JavaThread "Thread-84" [_thread_blocked, id=1920]
0x38e2c188 JavaThread "Thread-83" [_thread_blocked, id=2992]
0x38e31870 JavaThread "Thread-82" [_thread_blocked, id=2724]
0x38e30aa8 JavaThread "Thread-81" [_thread_blocked, id=1776]
0x38e33c08 JavaThread "Thread-80" [_thread_blocked, id=1728]
0x38e32db8 JavaThread "Thread-79" [_thread_blocked, id=1772]
0x38e322e0 JavaThread "Thread-78" [_thread_blocked, id=1764]
0x38e34af0 JavaThread "Thread-77" [_thread_blocked, id=1760]
0x39092a20 JavaThread "Thread-76" [_thread_blocked, id=3180]
0x38d4bc90 JavaThread "Thread-75" [_thread_blocked, id=1836]
0x38e0e8d8 JavaThread "Thread-74" [_thread_blocked, id=1820]
0x38e2b4e0 JavaThread "Thread-73" [_thread_blocked, id=1756]
0x3a07e410 JavaThread "Thread-72" [_thread_blocked, id=1144]
0x39fe8d68 JavaThread "Thread-71" [_thread_blocked, id=1768]
0x39fe81a0 JavaThread "Thread-70" [_thread_blocked, id=592]
0x39fe7410 JavaThread "Thread-69" [_thread_blocked, id=880]
0x39fd6708 JavaThread "Thread-68" [_thread_blocked, id=328]
0x39fd62a8 JavaThread "Thread-67" [_thread_blocked, id=1128]
0x38d811a0 JavaThread "Thread-66" [_thread_blocked, id=676]
0x38d86418 JavaThread "Thread-65" [_thread_blocked, id=1928]
0x3a025ce8 JavaThread "Implied and Derived Price Calculator (Gas Heating Oil Settlement)" [_thread_blocked, id=316]
0x38dc9de8 JavaThread "Implied and Derived Price Calculator (Gas Heating Oil)" [_thread_blocked, id=428]
0x38de8dd0 JavaThread "Implied and Derived Price Calculator (Brent Crude Settlement)" [_thread_blocked, id=1116]
0x3a3392a0 JavaThread "Implied and Derived Price Calculator (Brent Crude)" [_thread_blocked, id=3228]
0x3a07f7e8 JavaThread "Implied and Derived Price Calculator (White Sugar)" [_thread_blocked, id=1808]
0x39fa8688 JavaThread "Implied and Derived Price Calculator (Robusta Coffee)" [_thread_blocked, id=1080]
0x3911c230 JavaThread "Implied and Derived Price Calculator (Cocoa)" [_thread_blocked, id=2264]
0x38db0e60 JavaThread "Thread-60" [_thread_blocked, id=3136]
0x38db0b88 JavaThread "Thread-59" [_thread_blocked, id=3140]
0x38d968c8 JavaThread "Thread-58" [_thread_blocked, id=3144]
0x38d96648 JavaThread "Thread-57" [_thread_blocked, id=3148]
0x38d98310 JavaThread "Thread-56" [_thread_blocked, id=3152]
0x38d97d80 JavaThread "Thread-55" [_thread_blocked, id=3156]
0x390a4c18 JavaThread "Thread-54" [_thread_blocked, id=3160]
0x38d93818 JavaThread "Thread-53" [_thread_blocked, id=3164]
0x3908b410 JavaThread "Thread-52" [_thread_blocked, id=3168]
0x38d96fe8 JavaThread "Thread-51" [_thread_blocked, id=3172]
0x38d5c728 JavaThread "Thread-49" [_thread_blocked, id=3184]
0x38d5c3a0 JavaThread "Thread-48" [_thread_blocked, id=3188]
0x38d5ac68 JavaThread "Thread-47" [_thread_blocked, id=3192]
0x38d5a8e0 JavaThread "Thread-46" [_thread_blocked, id=3196]
0x38d59298 JavaThread "Thread-45" [_thread_blocked, id=3200]
0x38d58728 JavaThread "Thread-44" [_thread_blocked, id=3204]
0x38d838c8 JavaThread "Thread-43" [_thread_blocked, id=3208]
0x38d82da8 JavaThread "Thread-42" [_thread_blocked, id=3212]
0x38d81fe8 JavaThread "Thread-41" [_thread_blocked, id=3216]
0x38d81500 JavaThread "Thread-40" [_thread_blocked, id=300]
0x38d7ef50 JavaThread "Thread-38" [_thread_blocked, id=820]
0x38d7de50 JavaThread "Thread-37" [_thread_blocked, id=1036]
0x38da26e8 JavaThread "Thread-36" [_thread_blocked, id=480]
0x38da24d8 JavaThread "Thread-35" [_thread_blocked, id=1880]
0x38da1008 JavaThread "Thread-34" [_thread_blocked, id=1924]
0x38d4ae48 JavaThread "Thread-33" [_thread_blocked, id=2100]
0x38d80c38 JavaThread "Thread-32" [_thread_blocked, id=1832]
0x39068a48 JavaThread "Thread-31" [_thread_blocked, id=1800]
0x39068008 JavaThread "Thread-30" [_thread_blocked, id=1824]
0x38d5df00 JavaThread "Thread-29" [_thread_blocked, id=1840]
0x38d477f0 JavaThread "Thread-27" [_thread_blocked, id=1848]
0x38d47588 JavaThread "Thread-26" [_thread_blocked, id=1828]
0x38d2f6b0 JavaThread "Thread-25" [_thread_blocked, id=1936]
0x38d2ec38 JavaThread "Thread-24" [_thread_blocked, id=1868]
0x38d2df20 JavaThread "Thread-23" [_thread_blocked, id=2060]
0x38d2dcb8 JavaThread "Thread-22" [_thread_blocked, id=1860]
0x38d53da0 JavaThread "Thread-21" [_thread_blocked, id=2096]
0x38d53b38 JavaThread "Thread-20" [_thread_blocked, id=1948]
0x38d52008 JavaThread "Thread-19" [_thread_blocked, id=1788]
0x38d87f20 JavaThread "Thread-18" [_thread_blocked, id=1844]
0x39081270 JavaThread "Thread-15" [_thread_blocked, id=1912]
0x39081008 JavaThread "Thread-14" [_thread_blocked, id=1888]
0x38d30c38 JavaThread "Thread-13" [_thread_blocked, id=1904]
0x3909bd58 JavaThread "Thread-12" [_thread_blocked, id=1900]
0x38d4c7a8 JavaThread "Thread-11" [_thread_blocked, id=1896]
0x38d4cb48 JavaThread "Thread-10" [_thread_blocked, id=1916]
0x38d914f0 JavaThread "Thread-9" [_thread_blocked, id=1892]
0x38d92148 JavaThread "Thread-8" [_thread_blocked, id=1792]
0x38d92628 JavaThread "Thread-7" [_thread_blocked, id=1872]
0x38d92e38 JavaThread "Thread-6" [_thread_blocked, id=1224]
0x38c481a0 JavaThread "Timer-0" [_thread_blocked, id=1708]
0x38c23108 JavaThread "HeartBeat Checker" [_thread_blocked, id=1284]
0x38bad3d0 JavaThread "RiskManager Event Propagator" [_thread_blocked, id=1864]
0x38bac780 JavaThread "OrderStatus processor" [_thread_blocked, id=932]
0x38c262d0 JavaThread "Order Event Propagator" [_thread_blocked, id=1716]
0x38c3cbf0 JavaThread "Data message processor" [_thread_blocked, id=1932]
0x38c3ca68 JavaThread "RiskManager Event Propagator" [_thread_blocked, id=1724]
0x38c3ce70 JavaThread "Position Event Propagator" [_thread_blocked, id=1280]
0x38baab88 JavaThread "Exchange Rate Propagator" [_thread_blocked, id=1448]
0x38bde210 JavaThread "Java Sound Event Dispatcher" daemon [_thread_blocked, id=1720]
0x38fb5d48 JavaThread "Market Event Propagator" [_thread_in_vm, id=1664]
0x38cf1008 JavaThread "Ping Sender" [_thread_blocked, id=1704]
0x38cf9538 JavaThread "Statistics Updater" [_thread_blocked, id=2768]
0x39033a70 JavaThread "Message Listener" [_thread_in_native, id=1700]
0x39033840 JavaThread "Message Sender" [_thread_blocked, id=1672]
0x38fabe68 JavaThread "Message Event Propagator" [_thread_in_vm, id=2772]
0x3900a8b0 JavaThread "TimerQueue" daemon [_thread_blocked, id=1696]
0x38f8a7e0 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1656]
0x002366b8 JavaThread "DestroyJavaVM" [_thread_blocked, id=1456]
0x38fac588 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1648]
=>0x38f73788 JavaThread "AWT-Windows" daemon [_thread_in_Java, id=1636]
0x38e8c490 JavaThread "AWT-Shutdown" [_thread_blocked, id=1640]
0x009cd4a8 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1680]
0x009cbfb0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1692]
0x009cb218 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1712]
0x009c25d8 JavaThread "Finalizer" daemon [_thread_blocked, id=1688]
0x009c10e8 JavaThread "Reference Handler" daemon [_thread_blocked, id=1676]
Other Threads:
0x009bcfc0 VMThread [id=1684]
0x009e82b0 WatcherThread [id=1668]
VM state:synchronizing (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00235c08/0x00000320] Safepoint_lock - owner thread: 0x009bcfc0
[0x00235c40/0x00000318] Threads_lock - owner thread: 0x009bcfc0
[0x00235e08/0x000002dc] Heap_lock - owner thread: 0x38fac588
Heap
def new generation total 5248K, used 4935K [0x02a90000, 0x03040000, 0x065a0000)
eden
[error occurred during error reporting, step 190, id 0xc0000092]
Dynamic libraries:
0x00400000 - 0x0040c000      c:\program files\java\jre1.5.0_05\bin\java.exe
0x77f80000 - 0x77ffc000      C:\WINNT\system32\ntdll.dll
0x7c2d0000 - 0x7c335000      C:\WINNT\system32\ADVAPI32.dll
0x7c570000 - 0x7c623000      C:\WINNT\system32\KERNEL32.dll
0x77d30000 - 0x77da8000      C:\WINNT\system32\RPCRT4.dll
0x78000000 - 0x78045000      C:\WINNT\system32\MSVCRT.dll
0x6d640000 - 0x6d7cc000      c:\program files\java\jre1.5.0_05\bin\client\jvm.dll
0x77e10000 - 0x77e79000      C:\WINNT\system32\USER32.dll
0x77f40000 - 0x77f7f000      C:\WINNT\system32\GDI32.dll
0x77570000 - 0x775a0000      C:\WINNT\system32\WINMM.dll
0x6d280000 - 0x6d288000      c:\program files\java\jre1.5.0_05\bin\hpi.dll
0x690a0000 - 0x690ab000      C:\WINNT\system32\PSAPI.DLL
0x6d610000 - 0x6d61c000      c:\program files\java\jre1.5.0_05\bin\verify.dll
0x6d300000 - 0x6d31d000      c:\program files\java\jre1.5.0_05\bin\java.dll
0x6d630000 - 0x6d63f000      c:\program files\java\jre1.5.0_05\bin\zip.dll
0x6d000000 - 0x6d167000      C:\Program Files\Java\jre1.5.0_05\bin\awt.dll
0x77800000 - 0x7781e000      C:\WINNT\system32\WINSPOOL.DRV
0x76620000 - 0x76631000      C:\WINNT\system32\MPR.DLL
0x75e60000 - 0x75e7a000      C:\WINNT\system32\IMM32.dll
0x7ce20000 - 0x7cf21000      C:\WINNT\system32\ole32.dll
0x39220000 - 0x3922e000      C:\Program Files\JS Pager\CBT.dll
0x779b0000 - 0x77a4b000      C:\WINNT\system32\oleaut32.dll
0x6e420000 - 0x6e426000      C:\WINNT\system32\INDICDLL.dll
0x6d240000 - 0x6d27d000      C:\Program Files\Java\jre1.5.0_05\bin\fontmanager.dll
0x7cf30000 - 0x7d186000      C:\WINNT\system32\shell32.dll
0x71710000 - 0x71794000      C:\WINNT\system32\COMCTL32.dll
0x70a70000 - 0x70ad6000      C:\WINNT\system32\SHLWAPI.dll
0x6d4c0000 - 0x6d4d3000      C:\Program Files\Java\jre1.5.0_05\bin\net.dll
0x75030000 - 0x75044000      C:\WINNT\system32\WS2_32.dll
0x75020000 - 0x75028000      C:\WINNT\system32\WS2HELP.DLL
0x6d4e0000 - 0x6d4e9000      C:\Program Files\Java\jre1.5.0_05\bin\nio.dll
0x39910000 - 0x39915000      C:\PCD32\pcihooks.dll
0x782c0000 - 0x782cc000      C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779a4000      C:\WINNT\system32\DNSAPI.DLL
0x75050000 - 0x75058000      C:\WINNT\system32\WSOCK32.dll
0x77340000 - 0x77353000      C:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000      C:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000      C:\WINNT\system32\MPRAPI.DLL
0x75150000 - 0x75160000      C:\WINNT\system32\SAMLIB.DLL
0x7cdc0000 - 0x7ce13000      C:\WINNT\system32\NETAPI32.DLL
0x751c0000 - 0x751c6000      C:\WINNT\system32\NETRAP.dll
0x77bf0000 - 0x77c01000      C:\WINNT\system32\NTDSAPI.dll
0x77950000 - 0x7797b000      C:\WINNT\system32\WLDAP32.DLL
0x7c340000 - 0x7c34f000      C:\WINNT\system32\SECUR32.DLL
0x773b0000 - 0x773df000      C:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773a3000      C:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783e000      C:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790e000      C:\WINNT\system32\SETUPAPI.DLL
0x7c0f0000 - 0x7c154000      C:\WINNT\system32\USERENV.DLL
0x774e0000 - 0x77514000      C:\WINNT\system32\RASAPI32.DLL
0x774c0000 - 0x774d1000      C:\WINNT\system32\rasman.dll
0x77530000 - 0x77552000      C:\WINNT\system32\TAPI32.dll
0x77360000 - 0x77379000      C:\WINNT\system32\DHCPCSVC.DLL
0x777e0000 - 0x777e8000      C:\WINNT\System32\winrnr.dll
0x777f0000 - 0x777f5000      C:\WINNT\system32\rasadhlp.dll
0x74fd0000 - 0x74fee000      C:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000      C:\WINNT\System32\wshtcpip.dll
0x6d470000 - 0x6d495000      C:\Program Files\Java\jre1.5.0_05\bin\jsound.dll
0x6d4a0000 - 0x6d4a7000      C:\Program Files\Java\jre1.5.0_05\bin\jsoundds.dll
0x51080000 - 0x510d8000      C:\WINNT\system32\DSOUND.dll
0x77820000 - 0x77827000      C:\WINNT\system32\VERSION.dll
0x759b0000 - 0x759b6000      C:\WINNT\system32\LZ32.DLL
0x7c950000 - 0x7c9e0000      C:\WINNT\system32\CLBCATQ.DLL
0x77840000 - 0x7787e000      C:\WINNT\system32\cscui.dll
0x770c0000 - 0x770e3000      C:\WINNT\system32\CSCDLL.DLL
0x76df0000 - 0x76e01000      C:\WINNT\system32\mydocs.dll
0x3a840000 - 0x3a98a000      C:\WINNT\system32\SHDOCVW.DLL
0x75160000 - 0x7516c000      C:\WINNT\System32\ntlanman.dll
0x75210000 - 0x75225000      C:\WINNT\System32\NETUI0.dll
0x751d0000 - 0x75208000      C:\WINNT\System32\NETUI1.dll
VM Arguments:
jvm_args: -Xms64m -Xmx768m -Djavax.swing.adjustPopupLocationToFit=false -Dsun.java2d.noddraw=true
java_command: star.client.gui.Startup
Environment Variables:
PATH=C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem
USERNAME=Administrator
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 7, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows 2000 Build 2195 Service Pack 4
CPU:total 2 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 1047984k(567712k free), swap 2034812k(1607528k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_05-b05) for windows-x86, built on Aug 26 2005 15:36:02 by "java_re" with MS VC++ 6.0

Hello, I have a similar error message when i`m tryinng to access to my ODBC database with pentaho, a JDBC aplication. This is my error:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_FLT_STACK_CHECK (0xc0000092) at pc=0x00b30c58, pid=4540, tid=3068
# Java VM: Java HotSpot(TM) Client VM (1.5.0_08-b03 mixed mode)
# Problematic frame:
# v ~SafepointBlob
--------------- T H R E A D ---------------
Current thread (0x173b6578): JavaThread "Thread-14" daemon [_thread_in_Java, id=3068]
siginfo: ExceptionCode=0xc0000092, ExceptionInformation=0x00000000 0x17dff8a8
Registers:
EAX=0x173b6578, EBX=0x173b6578, ECX=0x17dff930, EDX=0x7c91eb94
ESP=0x17dff8a8, EBP=0x17dff980, ESI=0x00000003, EDI=0x173b6578
EIP=0x00b30c58, EFLAGS=0x00010202
Top of Stack: (sp=0x17dff8a8)
0x17dff8a8: 1745ae60 0000007a 06c7e658 06af29b0
0x17dff8b8: 00a41fd8 6d7fa3b1 00a41fd8 16d6bc7c
0x17dff8c8: 00000000 00000001 00000001 17caefc0
0x17dff8d8: 6d80683c 1745ae50 00000000 00000001
0x17dff8e8: ffff027a ffff0000 ffffffff 00b2fc11
0x17dff8f8: 05c0001b 17dff858 ffff0023 173b6180
0x17dff908: 0000001d 00090009 00090003 00090004
0x17dff918: 00070009 ffffffff 000f0000 778c0000
Instructions: (pc=0x00b30c58)
0x00b30c48: 83 ec 6c dd 34 24 9b d9 24 24 83 ec 40 dd 1c 24
0x00b30c58: dd 5c 24 08 dd 5c 24 10 dd 5c 24 18 dd 5c 24 20
Stack: [0x17dc0000,0x17e00000), sp=0x17dff8a8, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
v ~SafepointBlob
J java.awt.EventQueue.postEvent(Ljava/awt/AWTEvent;)V
j java.awt.EventQueue.invokeAndWait(Ljava/lang/Runnable;)V+46
j org.pentaho.reportdesigner.crm.report.datasetplugin.multidataset.MultiDataSetReportElementConfigurator$12$1.run()V+200
v ~StubRoutines::call_stub
V [jvm.dll+0x86e84]
V [jvm.dll+0xddead]
V [jvm.dll+0x86d55]
V [jvm.dll+0x86ab2]
V [jvm.dll+0xa16b2]
V [jvm.dll+0x10f4ac]
V [jvm.dll+0x10f47a]
C [MSVCRT.dll+0x2a3b0]
C [kernel32.dll+0xb683]
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x173b6578 JavaThread "Thread-14" daemon [_thread_in_Java, id=3068]
0x177436a0 JavaThread "Thread-7" daemon [_thread_blocked, id=5364]
0x176e3780 JavaThread "Thread-4" daemon [_thread_blocked, id=3992]
0x17736d58 JavaThread "Thread-3" daemon [_thread_blocked, id=1640]
0x176c1dc8 JavaThread "TimerQueue" daemon [_thread_blocked, id=4292]
0x17502a98 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=5028]
0x00036030 JavaThread "DestroyJavaVM" [_thread_blocked, id=5944]
0x17502910 JavaThread "AWT-EventQueue-1" [_thread_in_vm, id=1304]
0x174f1e50 JavaThread "AWT-Windows" daemon [_thread_in_native, id=668]
0x00ab81f0 JavaThread "AWT-Shutdown" [_thread_blocked, id=4712]
0x00a941f8 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3988]
0x00a92c88 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5784]
0x00a91fd8 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=204]
0x00a890e0 JavaThread "Finalizer" daemon [_thread_blocked, id=4912]
0x00a87c78 JavaThread "Reference Handler" daemon [_thread_blocked, id=5416]
Other Threads:
0x00a851b0 VMThread [id=4832]
0x00a953d8 WatcherThread [id=5892]
VM state:synchronizing (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00035688/0x00000718] Safepoint_lock - owner thread: 0x00a851b0
[0x000356b8/0x00000710] Threads_lock - owner thread: 0x00a851b0
Heap
def new generation total 1728K, used 825K [0x02ad0000, 0x02ca0000, 0x02fb0000)
eden
[error occurred during error reporting, step 190, id 0xc0000092]
Dynamic libraries:
0x00400000 - 0x0040d000      C:\pentaho\java\bin\java.exe
0x7c910000 - 0x7c9c6000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c902000      C:\WINDOWS\system32\kernel32.dll
0x77da0000 - 0x77e4c000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e50000 - 0x77ee2000      C:\WINDOWS\system32\RPCRT4.dll
0x77fc0000 - 0x77fd1000      C:\WINDOWS\system32\Secur32.dll
0x77be0000 - 0x77c38000      C:\WINDOWS\system32\MSVCRT.dll
0x6d730000 - 0x6d8cb000      C:\pentaho\java\bin\client\jvm.dll
0x7e390000 - 0x7e420000      C:\WINDOWS\system32\USER32.dll
0x77ef0000 - 0x77f37000      C:\WINDOWS\system32\GDI32.dll
0x76b00000 - 0x76b2e000      C:\WINDOWS\system32\WINMM.dll
0x6d2f0000 - 0x6d2f8000      C:\pentaho\java\bin\hpi.dll
0x76bb0000 - 0x76bbb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d700000 - 0x6d70c000      C:\pentaho\java\bin\verify.dll
0x6d370000 - 0x6d38d000      C:\pentaho\java\bin\java.dll
0x6d720000 - 0x6d72f000      C:\pentaho\java\bin\zip.dll
0x6d070000 - 0x6d1d9000      C:\pentaho\java\bin\awt.dll
0x72f80000 - 0x72fa6000      C:\WINDOWS\system32\WINSPOOL.DRV
0x76340000 - 0x7635d000      C:\WINDOWS\system32\IMM32.dll
0x774b0000 - 0x775ed000      C:\WINDOWS\system32\ole32.dll
0x5b150000 - 0x5b188000      C:\WINDOWS\system32\uxtheme.dll
0x736e0000 - 0x73729000      C:\WINDOWS\system32\ddraw.dll
0x73b40000 - 0x73b46000      C:\WINDOWS\system32\DCIMAN32.dll
0x746b0000 - 0x746fb000      C:\WINDOWS\system32\MSCTF.dll
0x6d2b0000 - 0x6d2ef000      C:\pentaho\java\bin\fontmanager.dll
0x6d530000 - 0x6d543000      C:\pentaho\java\bin\net.dll
0x71a30000 - 0x71a47000      C:\WINDOWS\system32\WS2_32.dll
0x71a20000 - 0x71a28000      C:\WINDOWS\system32\WS2HELP.dll
0x6d550000 - 0x6d559000      C:\pentaho\java\bin\nio.dll
0x7e6a0000 - 0x7eec0000      C:\WINDOWS\system32\shell32.dll
0x77f40000 - 0x77fb6000      C:\WINDOWS\system32\SHLWAPI.dll
0x773a0000 - 0x774a3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
0x58c30000 - 0x58cca000      C:\WINDOWS\system32\comctl32.dll
0x597f0000 - 0x59844000      C:\WINDOWS\system32\netapi32.dll
0x71aa0000 - 0x71ab2000      C:\WINDOWS\system32\MPR.dll
0x75f10000 - 0x75f17000      C:\WINDOWS\System32\drprov.dll
0x71bb0000 - 0x71bbe000      C:\WINDOWS\System32\ntlanman.dll
0x71c70000 - 0x71c87000      C:\WINDOWS\System32\NETUI0.dll
0x71c30000 - 0x71c70000      C:\WINDOWS\System32\NETUI1.dll
0x71c20000 - 0x71c27000      C:\WINDOWS\System32\NETRAP.dll
0x71b90000 - 0x71ba3000      C:\WINDOWS\System32\SAMLIB.dll
0x75f20000 - 0x75f29000      C:\WINDOWS\System32\davclnt.dll
0x778f0000 - 0x779e7000      C:\WINDOWS\system32\SETUPAPI.dll
0x77b10000 - 0x77b32000      C:\WINDOWS\system32\appHelp.dll
0x76f90000 - 0x7700f000      C:\WINDOWS\system32\CLBCATQ.DLL
0x77010000 - 0x770e0000      C:\WINDOWS\system32\COMRes.dll
0x770f0000 - 0x7717b000      C:\WINDOWS\system32\OLEAUT32.dll
0x77bd0000 - 0x77bd8000      C:\WINDOWS\system32\VERSION.dll
0x76940000 - 0x76948000      C:\WINDOWS\system32\LINKINFO.dll
0x76950000 - 0x76976000      C:\WINDOWS\system32\ntshrui.dll
0x76ae0000 - 0x76af1000      C:\WINDOWS\system32\ATL.DLL
0x76630000 - 0x766e4000      C:\WINDOWS\system32\USERENV.dll
0x763b0000 - 0x76559000      C:\WINDOWS\system32\NETSHELL.dll
0x76e40000 - 0x76e4e000      C:\WINDOWS\system32\rtutils.dll
0x76bc0000 - 0x76bef000      C:\WINDOWS\system32\credui.dll
0x76d20000 - 0x76d39000      C:\WINDOWS\system32\iphlpapi.dll
0x18130000 - 0x181b4000      C:\Archivos de programa\TortoiseSVN\bin\tortoisesvn.dll
0x77180000 - 0x77227000      C:\WINDOWS\system32\WININET.dll
0x77a50000 - 0x77ae5000      C:\WINDOWS\system32\CRYPT32.dll
0x77af0000 - 0x77b02000      C:\WINDOWS\system32\MSASN1.dll
0x6eec0000 - 0x6eee2000      C:\Archivos de programa\TortoiseSVN\bin\libapr_tsvn.dll
0x719d0000 - 0x71a10000      C:\WINDOWS\system32\MSWSOCK.dll
0x78130000 - 0x781cb000      C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\MSVCR80.dll
0x6ee60000 - 0x6ee89000      C:\Archivos de programa\TortoiseSVN\bin\libaprutil_tsvn.dll
0x6ee50000 - 0x6ee5e000      C:\Archivos de programa\TortoiseSVN\bin\libapriconv_tsvn.dll
0x181c0000 - 0x181cc000      C:\Archivos de programa\TortoiseSVN\bin\intl3_svn.dll
0x7c420000 - 0x7c4a7000      C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\MSVCP80.dll
0x76740000 - 0x76749000      C:\WINDOWS\system32\SHFOLDER.dll
0x6ee40000 - 0x6ee46000      C:\Archivos de programa\TortoiseSVN\iconv\_tbl_simple.so
0x6e060000 - 0x6e067000      C:\Archivos de programa\TortoiseSVN\iconv\windows-1252.so
0x6ed50000 - 0x6ed56000      C:\Archivos de programa\TortoiseSVN\iconv\utf-8.so
0x779f0000 - 0x77a45000      C:\WINDOWS\System32\cscui.dll
0x765b0000 - 0x765cd000      C:\WINDOWS\System32\CSCDLL.dll
0x6d3e0000 - 0x6d3ed000      C:\pentaho\java\bin\JdbcOdbc.dll
0x745e0000 - 0x7461d000      C:\WINDOWS\system32\ODBC32.dll
0x76360000 - 0x763aa000      C:\WINDOWS\system32\comdlg32.dll
0x20000000 - 0x20018000      C:\WINDOWS\system32\odbcint.dll
0x612d0000 - 0x612eb000      C:\WINDOWS\system32\odbccp32.dll
0x1a520000 - 0x1a7f6000      C:\WINDOWS\system32\xpsp2res.dll
0x7d1f0000 - 0x7d4ae000      C:\WINDOWS\system32\msi.dll
0x76980000 - 0x76a31000      C:\WINDOWS\system32\SXS.DLL
VM Arguments:
jvm_args: -XX:MaxPermSize=256m -Dswt.swing.laf=com.sun.java.swing.plaf.windows.WindowsLookAndFeel
java_command: launcher/launcher-1.0.0.jar org.pentaho.reportdesigner.crm.report.ReportDialog
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:\pentaho\java\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\ATI Technologies\ATI Control Panel;C:\ARCHIV~1\ULTRAE~1;C:\Archivos de programa\Archivos comunes\Easysoft\Shared\
USERNAME=mciudadc
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 (cores per cpu 1, threads per core 1) family 6 model 13 stepping 8, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 2096492k(853856k free), swap 4033316k(2683036k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_08-b03) for windows-x86, built on Jul 26 2006 01:10:50 by "java_re" with MS VC++ 6.0
I don´t know where is the problem. Any help? PLEASE?
Thanks!!!

Sql server 2000 driver and windows 98

i know that this has been discussed many times but i cant find an answer to my problem. was hoping someone could shed some light on it.
getting the error:
classnotfoundException: com.microsoft.jdbc.sqlserver.sqlserverdriver
ive set the classpath and the path.
set PATH = %PATH%;C:\CIMAGE\IMASTER;C:\ORAWIN95\BIN;C:\Novell\Client32;C:\Progra~1\Mts;C:\J2SDK1~1.1_0\BIN;
set CLASSPATH = C:\Progra~1\mssqls~1\lib\msbase.jar;C:\Progra~1\mssqls~1\lib\msutil.jar;C:\Progra~1\mssqls~1\lib\mssqls~1.jar;C:\J2SDK1~1.1_0\lib;C:\javaTest;
code snipet:
public void makeConnections(){
try{
String DB_DRIVER= "com.microsoft.jdbc.sqlserver.SQLServerDriver";
StringDB_URL= "jdbc:microsoft:sqlserver://myMachine:1433";
     String username = "sa";
     String password = "password";
     Class.forName(DB_DRIVER);
     con = DriverManager.getConnection(DB_URL,username,password);
     System.out.println("Connection with DB ..........OK");
catch(SQLException ex) {
     System.err.println("SQLException: " + ex.getMessage());
catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
am i missing anything?
when i downloaded the driver it didnt state that windows 98 was supported, i was wondering if this was the problem.
need help
thanks.

never mind, figured it out.

Removing Server 2000 DC and adding Server 2008 DC.

Similar Messages

Maybe you are looking for