Removing SMS registered numbers

Hi
I have 5 numbers in the dropdown of the OPTIONS SMS page. When I send an sms - even though it shows my correct number it sends with a return address of another number. I have logged onto my account to remove them and there is only one number there and it IS my correct mobile number. I do not know the other numbers and they appear to not belong to me. Having only just realised this I have sent a number of persoanl nessages via skyoe that have obviously been delivered to the worng account. Can youplease guide me into removing them fomr my SKYPE system.
Regards
Tony Ayling

Quoting from https://support.skype.com/en/faq/FA672/how-do-i-show-my-mobile-number-when-sending-sms-text-messages...:
"SMS text messages sent to mobile phones in Canada, China, Taiwan and the USA will not display your Skype Name or a validated mobile number. Instead, these SMS text messages will have generic, pre-defined numbers as the sender ID. For SMS text messages sent to mobile phones in Russia, the Skype Name is not displayed. A generic number is displayed unless you’ve set your mobile number as the sender ID."
Does this apply in your case?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Similar Messages

Registered numbers problem

I register new tel no. in skype to go. Then I make international call - works well.
Then I try another call, but cant connect to my acces number. Voice message "Połączenie nie może być zrealizowane". Happens every time. I did try many intervals (minutes and hours).
So I remove this registered number, add it again and I can make 1 single call again. If I try one more time: the problem comes back.
Same happens if I add new number and try calling after some time (2-3 day) - cant get through to acces number.
Acces number: in Poland, Warsaw (22)
My mobile: Orange
Happens: always.
Its realy frustrating. Any ideas?
Adam

Ted,
You don't have to remove the older version from your computer, but you should make sure you know which one you are using, and use the newer one for most things. Quit Numbers. If you have a Numbers shortcut icon on your Dock, use it to start Numbers. Then choose Numbers > About Numbers and see which one you are using. If it's Numbers 08, the first version, quit it and drag the shortcut icon off your Dock.
Now use Finder to browse your Applications folder for iWork 09. In that folder, find Numbers and launch from there. Check to make sure you have started Numbers 09. Then right-click the icon on the Dock and choose to keep that icon on the Dock.
You should be good from there on.
Jerry

How can i remove a pages/numbers template

How can i remove a pages/numbers template.
They used to be in the library in my home map, but i can't find the library on my HD.
Is there anyone who knowes a solution
Greets Kloria

Hi everyone,
I find the answer myself.
Go tot the finder, select Go in the menu, push the alt button and there it is.
De library is now visible and you can open it.
Find Application support > iWorks > Pages or Numbers > Templates > My Templates.
Remove the template, thats it.
Greets Kloria

Pages 5.1 can anyone help with removing previous page numbers please?

Hi. in the new pages 5.1 I have made a section break at page 10 in a document and found how to start numbering from page 10 as page 1. Can anyone please tell me how to remove the page numbers from 1 to 10 that preceed this section?

from the speed can I assume that it was adsl (copper) and not fibre connection?
which hub do you have?
can you enter your phone number and post results remember to delete number https://www.btwholesale.com/includes/adsl/main.html
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Removal of Bates numbering in Adobe Acrobat Pro X

We can't remove the bates numberings in our PDF docs. When we try to we get a message that says
"Acrobat cannot find any Bates Number in this file. If you see Bates Number information, it was not added in Acrobat or by an Adobe PDFMaker, and cannot be detected as such"
Is there another way to remove this?
The docs we're working on are scanned.

Obviously, the previous answers are correct. Since the Bates numbers are simply image content at this point, your options are limited. In addition to the redaction tool, however, if the Bates numbering text is clean and positioned away from other content, you may be able to OCR the document, then use the Search and Redact function in Acrobat to remove the Bates numbers.
The only other option (assuming the placement of the Bates numbering is extremely consistent, such as those applied with Acrobat or a similar tool) would be the use of the custom redaction template feature in a 3rd party plug-in by Evermap called AutoRedact. This software would allow you to create a custom template that could then be applied to each page, at which point the image content contained within the resulting rectangle annotation could be redacted.
Disclosure: I have no affiliation of any kind with Evermap, but did address the use of several of their products in my book, "The PDF Litigation Guide."
Hope that helps!
Jason Covey
PDF Litigation Solutions, LLC
http://www.pdflitigationguide.com

VAT Register numbering

Hello,
I have a problem with the VAT Register numbers in Italy. This is a serious issue for the Italian authorities.
The number of the month of June starts with 2008/1 instead of 2008/8.
The last printing was related to April month and the last page was 2008/7.
In the previous months the number flow has always been correct.
Has anyone had a similar issue?
How has it been solved?
Thank you.
Kind regards,
Linda

Hi,
Could the number be incorrect because the company has skipped a month?
The report of April had the right numbering.
In May, no tax movements happened.
Now, we want to make the report of June.
Thank you for giving your advice.
Kind regards,
Linda

Remove gridlines in Numbers

Does anyone know how to remove gridlines in Numbers? In Excel, you click on Options and uncheck the gridlines checkbox. In Numbers, I can't find the same. Any suggestions?

Hi Will,
That's not the behaviour I'm getting. Here's a screen shot, taken while Show Print view was in effect. The table on the right is a duplicate of the one on the left. Except for being selected, and having different names, the tables are identical.
Note that the light grey fill of the header row and header column is visible in both, as is the darker grey fill I applied to two cells in the original table before duplicating.
Preparing these, I did notice one missing instruction in my previous post; Removing the cell borders requires a two pass process:
Select the block of cells (or the whole table)
Pass 1
click the border selection button (left of the one showing "thin" in the post above) and choose Outside Edges.
Click the line style button ("thin") and select 'none'
Pass 2
click the border selection button (left of the one showing "thin" in the post above) and choose Inside Borders.
Click the line style button ("thin") and select 'none' (even if it already shows this).
Click away from the table to deselect it and view the results.
Regards,
Barry

I can't remove keynote, pages, numbers, or any microsoft applications from my dock. Please Help!

I have been trying to clean up my dock, but i can't remove certain items from my dock. I can't remove keynote, pages, numbers, or any microsoft applications. When I was trying to delete the apps they were not running or in use. I tried dragging the icons to the trash bin and I also tried dragging the icons away from the dock, but they just kee bouncing back to the dock. Please help!

Welcome to Apple Support Communities
Try deleting the Dock settings file. Open Finder, select Go menu (on the menu bar) > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.dock.plist", and finally, open Terminal (in /Applications/Utilities) and type:
killall Dock
This will restore Dock to factory settings, so iWork applications and Microsoft apps will be deleted from Dock

Removing verified mobile numbers from list

I cannot figure out how to remove a mobile phone number which was previously added and verfied from my online number (caller ID) list.
Is it even possible to remove mobile phone numbers which are old and no longer connected?

Hi, I made a mistake today, and I put phone number on Mobile phone. I don't need that, so need to remove it. I only used video phone and I am unable to used it to contact my daughter. Please remove phone number on mobile phone list. I did it twice by mistake, please help me how to remove it.
Thank you. *removed for privacy*

Howto choose modbus tcp functions with dsc 8.0.1 / DSC register numbering explanation

Hello,
after reading in the discussion forums I still cannot solve my DSC Modbus problems.
First I'm confused about register numbering.
Playing around with the registers, which the multiple variable shows, give me the finally success polling values:
Registers in device documentation: 0x0000 - 0x0007 Finally I found them on 300001-300008
Question: Why is the leading 3 needed....?
Sniffing with Ethereal shows me "function 4" is used for reading by Labview.
Question : Howto use Modbus function 3 or (for writing) 5, 6, 15, 16, (read and write) 23?
My biggest problem at the moment:
I want to read register 0x1010 = 4112d it contain a length of process data byte in packed format. Reading ends in exception 0x8BBB0005
Thanks in advance for an answer or just a link with similar problems

You have different types of registers inside a controller. 3xxxxx are input registers and 4xxxxx are holding/output registers. Check out the attached pdf file.Message Edited by unclebump on 07-26-2006 02:04 PM
Attachments:
PI_MBUS_300.pdf ‏173 KB

How to remove the track numbers

When I burn an mp3 disk. Itune adds the track number to the file name of my music and any folder on the cd. My cd player only will display the first 12 characters of the song name, which is "01 - Walking", when it could be "Walking on S". Which is a bit better. Is there a way to turn this numbering off, or can I burn to a harddrive folder and then edit the names taking the numbering out and then burn that folder to the cd??
Rachael

Do this...
Quit iTunes.
Open the Terminal application.
Type or copy paste this into the Terminal window.
defaults write com.apple.iTunes create-filenames-with-tracknumber -bool FALSE
Open iTunes.
Go to iTunes prefs -> Advanced.
Uncheck *Keep iTunes music folder organized*, then recheck it.
It will go through and remove all track numbers.
Any new additions to iTunes will not have track numbers placed in the filename.
To set it back to normal (if you want at some time), open Terminal and copy/paste
defaults write com.apple.iTunes create-filenames-with-tracknumber -bool TRUE

How do I remove credit card numbers that drop down from a menu?

when I am asked for my credit card number on websites where I pay my bills, usually one or two numbers previously entered appears when the first number is entered. Some of those numbers are inactive. Is there a way to remove one or more numbers? I understand it is a browser problem.

Firefox 4, to be released next year, shouldn't store credit card numbers anymore by performing a check.
[https://bugzilla.mozilla.org/show_bug.cgi?id=188285 Bug 188285] – Form autocomplete should not store credit card numbers

Has anyone had an issues with certain not being able to SMS certain numbers after upgrading to IOS6.1.3

I upgraded my software on iphone 4s on Tuesday and since then I can no longer send an SMS to my parents (how live in Spain and therefore its a Spanish mobile). The international dialing code is correct, and I am on a contract therefore no isssues with credit.
When i try to send the SMS it keep saying delivery failed. Been trying for 3 days. And also when my parents call me from there mobile numbers it now coming up as a blocked unknown caller rather than the contact name as it did pre-upgrate.
Would really appreciate if anyone has an ideas to fix this as hate being cut off from my familly.

Already done this and they haven't found any problems or made any changes. All the problems started following the upgrade to 6.1.3

What are the steps to remove SMS Provider traces from a server

Hi,
My client's environment is set up with a standalone primary site. They decided to install a second SMS Provider on a site system also running the Reprting Services Point to provide redundancy in the case the SMS Provider on the primary site
would go down.
They experienced a problem with the server running the second SMS Provider and it went down for about a day. The behavior for SCCM console users was to get an error message preventing them to connect to SCCM; they had to close the console and re-launch it
so it would randomly connect to the SMS provider on the primary site successfully. When a SMS provider is down, it seems the console won't redirect itself automatcally to another provider when trying to connect.
Since it was causing some frustration because console users had to launch it several times before they could connect, someone removed the second SMS Provider using the Site Maintenance wizard on the primary site. The thing is the wizard ran while the second
SMS Provider was down, it removed traces of this SMS Provider from the site configuration, but couldn't remove the actual SMS Provider files and registry entries since the server was down.
Now, only one SMS Provider is active on the primary site server, but we have orphaned SMS Provider files and registry keys on the site system server. Is there a way to remove them cleanly? The site system is still running the Reporting Services Point, so
we cannot remove everything related to SCCM.
Now we prefer to keep a single SMS Provider on the primary site server, since SCCM is not consider critical to the business anyway, and to avoid this issue in the future.
My guess would be to reinstall the SMS Provider from the Site Maintenance wizard and remove it after, but I just want to have feedback from people who might have deal with it in the past.
Tnx for help
Patrick

Hi,
Could you install the SMS Provider from the Site Maintenance wizard while SMS Provider files and registry entries are still there? Please have a look on the thread below, although it is for sccm 2007.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/bb307748-7638-404d-a6a4-982827a051c8/how-do-i-remove-sql-provider-that-was-previously-installed-on-a-remote-sql-server?forum=configmgrsetup
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to remove duplicate phone numbers under iMessage settings?

I've been using iMessage for a while now and a lot of my friends have brought to my attention that every iMessage I sent showed it came from my email rather than my phone number. So I signed out of iMessage and tried logging back in using my phone number and it would not work, saying the activation did not go through. So I tried again and again throughout the day and it finally worked eventually. The problem is I get a duplicate (lots of it) of my phone numbers, I'm guessing from my countless attempts at signing in. How do I go about removing all the duplicates that are grayed out? Also why do the last three have tick marks next to them? How do I make it so that only one of them is tickmarked and delete the rest of the duplicates. I've provided screenshots below.
Also, "waiting for activation..." has been shown under the settings for almost the whole day. How long does this take?

I've tried signing out and back in again. It doesn't do anything. I still get the unnecesarily long list of duplicate phone numbers and have 2 or 3 of them randomly tick marked. I've tried this multiple times, it doesn't get rid of them at all. As far as I'm concerned, my friends do receive my iMessage from my number rather than my email. I just find it a nuisance to have such a long list of my phone number 25 times over. I don't think it affects anything though, but any way to get rid of them would be great.
Also, it's been 3 days and it still says "waiting for activation" on my iMessage and Facetime settings. How long does this take? As far as I know, my friends have told me iMessaging with me is flawless but I'm confused as to why it's still trying to activate.

Removing SMS registered numbers

Similar Messages

Maybe you are looking for