Removing Space in Header

I am using reports 10g.
I created a report that does not have a header. However, when I run the report blank spaces appear at the top of the report, before printing starts. How do I begin printing at far most top of the report? I dont't want any spaces appearing before the first line prints.

Hello,
Go to the reports Paper Layout and use option Edit Margin from top toolbar. Then drag the bold lined frame/body at the top of the page. Then the report will start printing from the top of the page.
-Ammad

Similar Messages

How to remove space after paragrph in pages on ipad

Can't figure out how to remove space after each paragraph in Pages for Ipad

Settings > General > International > Region Format
Set it to your country to format numbers and dates in the way your country does.

How to remove space below text?

In the screenshot below, how to remove space below text? I simply added a text box using the type tool and I get that extra space bellow the letter "B" that I don't need. I want to remove that space to center the letter within the octogon.
Thanks!

You might consider giving the letter a negative baseline shift and aligning it to centre.
That way you can adjust it so that its anchor point coincides with the centre of the hexagon.
Like this:
Another thing: You may find it easier working with type if you hide bounding boxes.

How do I remove space after paragraph?

Does Robohelp have the "Remove Space after paragraph" button for reducing the space between lines, like the one in Word?

In HTML the space after is controlled by the style in your CSS file. You need to edit the style in the Style Editor.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I remove spaces or special characters within a cell for large amounts of data

Is there any shortcut to remove spaces between words and numbers within a cell?
Example:
Current: .5 lt PET (6)
Need: .5ltPET(6)
Is there any shortcut to remove special characters between numbers within a cell?
Example:
Current: 0--000--000--0
Need: 00000000

Thanks Wayne.
I have been away from using Numbers or Excel for 4-5 years so it is slowly coming back to me. I am get that I need to use the SUBSTITUTE function however I am having trouble with getting it to work.
My Data
ST PAULI 12/12 NR
$27.16
12oz NR(12)
0--80660--95937--5
ST PAULI 4/6/12 NR
$28.76
12oz NR(6)
0--80660--95935--1
ST PAULI DK 12/12 NR
$0.00
12oz NR(12)
0--000--000--0
ST PAULI DK 4/6/12 NR
$28.76
12oz NR(6)
0--80660--95945--0
ST PAULI N/A 4/6/12 NR
$20.66
12oz NR(6)
0--80660--95955--9
CAYMAN JACK 4/6/12 NR
$29.12
12oz NR(6)
8--15829--01006--8
CAYMAN JACK 8OZ/12PK CAN
$23.18
8oz CAN(12)
8--15829--01061--7
TGIF LIIT 10OZ FROZEN POUCH
$35.80
10oz POUCH(24)
8--15829--01043--3
TGIF MARGARITA 10OZ FROZEN POUCH
$35.80
10oz POUCH(24)
8--15829--01047--1
TGIF PINA COLADA 10OZ FROZEN POUCH
$35.80
10oz POUCH(24)
8--15829--01045--7
TGIF STRAWBERRY 10OZ FROZEN POUCH
$35.80
10oz POUCH(24)
8--15829--01042--6
BALLAST PT BIG EYE IPA 1/2 BBL
$190.00
KEG 1984oz (1/2 KEG)
0--000--000--0
BALLAST PT BIG EYE IPA 1/6 BBL
$73.00
KEG 660.1oz (1/6 KEG)
0--000--000--0
BALLAST PT BIG EYE IPA 4/6/12 CAN
$33.00
12oz CAN(6)
6--72438--00052--7
There are many more but this is enough to show you. I need to remove all spaces from the First and Third Columns. I need to remove all (--) from the fourth. Where do I put in the substitute function and what is source sting, existing-string, new-string, and occurrence.
Thank You for your help.

How do I remove spaces and special characters from the file name during rendering?

I understand that I can set LR_renamingTokensOn to true, but I would like to replace all spaces in the file name with an underscore and remove characters not in the range A-Z and 0-9. What's the easiest way to achieve this?

local photo = catalog:getTargetPhoto()
local sesn = LrExportSession {
    photosToExport = { photo },
    exportSettings = {
        -- ... (determine from export preset) - whatev you want, just be sure you set export directory: LR_export_destinationPathPrefix
        LR_tokens = "{{custom_token}}",
        LR_tokenCustomString = LrPathUtils.removeExtension( photo:getFormattedMetadata( 'fileName' ) ):gsub( "[ %c]", "" ) -- remove spaces and control characters
sesn:doExportOnNewTask()

Removing Space Between Web Parts causes Horizontal Bar in Modals

Hello all,
I used the following to remove space between Web Parts, but am now getting a horizontal bar in my modals. Please assist:
http://www.ashokraja.me/tips/How-To-Remove-Extra-Space-Around-the-Web-Part-In-SharePoint-2013
Thanks!
Kelly
Personal Blog: http://thebitsthatbyte.com

I removed it using the following CSS, which aligns our spacing:
Control spacing between Web Parts*/
.ms-webpart-cell-vertical
margin-top:
0px;
margin-bottom:
0px;
Personal Blog: http://thebitsthatbyte.com

HT201364 how do i remove space from my start up disk

How do i remove space from my start up disk?

Do you mean "make" space on your HD?
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

How to remove space from a variable in a smartform

Hi,
I have a problem in displaying a variable in a smartform..The variable shows some blank space that preceeds the data.
for eg:,
variable = 18.000.
How to remove space before 18.000?

To remove the decimal places for quantity and rate/quantity , use the syntax to restrict the number of digits after decimal places. The syntax is
&symbol(.N)&
where N is number of decimal places.
Since you dont want decimals use &symbol(.0)&
For the other case it depends on how the currency is represented , any way try using the syntex &symbol(T)&
Please give me reward point If it is useful
Thanks
Murali Poli

How to remove space below the table in smartforms

how to remove space below the table in smartforms

maintain a loop counter for item say count
and in text editer write
if count > 6
new-page.
endif.

How remove space in column ?

In a.newunit column I have spaces before data. I tried to use TRIM and LTRIM -- but doesn't work :(
What else I can use?
SELECT LTRIM(u.scode), LTRIM(a.newunit)
FROM unit u,
aaa_test a
WHERE LTRIM(u.scode) = LTRIM(a.newunit)

Can you explain what "doesn't work" means, preferrably with an example (i.e. DDL for the Unit and AAA_Test tables, INSERT statements, and a query that returns the incorrect results)?
TRIM will remove spaces at the beginning and end of a value, LTRIM will remove spaces at the beginning of a value. Potentailly, you don't really have spaces at the beginning of your data. Potentially, you are misinterpreting something (in which case seeing what constitutes "not working" is critical).
Justin

[ADF FACES] How to remove the "select" header in selection column

Hi,
Is there a way I can prevent the "select" header to be rendered (or customize this header) for the selection column in a af:table when using either af:tableSelectOne or af:tableSelectMany?
Emmanuel.

Hi, I've read you filed an ER (in 2004, it's 2007 now) to be able to remove/adjust the header in a selection column. Until now I can only find threads/posts about people facing the same issue, the header can't be adjusted. The answer of one of the Oracle-employees is that it isn't supported and we can extend the adf-source code but this isn't supported by Oracle.
What's the official answer of Oracle on this?
This is a very popular issue that needs to be adressed to pleaze the customer that was convinced to use Oracle ADF ... and now we can't answer his requests?
This issue has been around for quite a long time now, from 2004, there has to be a solution for this, wright?

Adding space in Header Prompt

Hi All
Did any one try adding couple of white spaces in Header bean prompt dynamically??I tried " " but oaframework encodes "&" -> "&". Is there any way for displaying white spaces in header prompt?
Thanks in advance
Murari

Hi Tapash
I am infact setting page title. The code is:
pageContext.getPageLayoutBean().setTitle("OA<space><space><space> Framework");
I want the output in the browser as:
OA<space><space><space>Framework.
But I get
OA<space>Framework
I tried passing as:
pageContext.getPageLayoutBean().setTitle("OA <semicolon>& nbsp<semicolon>&nbsp<semicolon>Framework");
( <semicolon> => ";">
But its displayed as is.
Thanks
Murari

Remove spaces and special characters from a form field

Hi,
I am tragically new to all of this, but am trying to create a form in Adobe Acrobat 9. I am trying to use a Custom Format script to take inputs in a form field and automatically remove spaces and special characters (hyphens specifically). For example, if a user inputs "RAN-99 06" I would like it to change to "RAN9906." I found this script that will not let users input special characters
if (!event.willCommit) {
event.change = event.change.replace(/[\$#~%\*\*\^\-\+=\[\]\{\};\"\<\>\?\|\\\!]/g, "");
And that's okay, but I can't figure out how to disallow spaces. Also, the perference would be for a script to allow users to input the data as they like, but to clean it up after they leave the text field.
Thanks in advance!

From the description, I assume that the script is currently in the Keystroke event. In fact, that would be a most logical way to have it; simply ignore anything unwanted when entered.
If you want to allow the user to enter anything, but "clean it up" when done, you would place your code in the Validate event. You will have to adjust your Regular Expression so that it works globally, but that's the whole difference. This will change the value.
Note that you can also enter the code into the Format event. However, that would only change the visual representation of the value, but internally, the value would remain as entered.
Hope this can help.
Max Wyss.

Removing spaces in field

Sorry for asking a very simple (hopefully) question. Does anyone know how can remove spaces from a given field. One of my field has the following:
field1 = ' ABCD'.
What command should I use so field1 would end up with just 'ABCD'?
Thanks.

Hi SS
General templates for doing such operations on strings:
SHIFT <c> LEFT DELETING LEADING <str>.
SHIFT <c> RIGHT DELETING TRAILING <str>.
where str can be SPACE or something like e.g: 'abc'
Regards
Ashish

Removing Space in Header

Similar Messages

Maybe you are looking for