Removing "Standard" options from the WebUI search filter

Hi Experts,
I have configured the YMCR and Y**** transaction types for RFC, Urgent, Normal and other Changes.
I have removed the SMCR transaction type for standard from dno_cust/04 and I do not see the standard transaction type anywhere now except for all of them showing up in the drop down Menu of the Search filter.
Can you please advise how to remove these?

Hi Ranjith,
Can you make sure via SUIM that this object is not assigned via some other role to the user.
there are other ways but if something can be achieved easily why you need to put extra efforts for the same.
Unless someone authorized for SMCR should only see ZMCR for example and if this is not working then there is something definitely wrong because from business point of view if I have multiple customer and multiple transaction type I can view all which is not correct.
I have done this for single and VAR scenario so know that this works.
Or alternative
Create a test user assign only few roles(relevant one's) to this user check it &  it must work
e.g. I have logged on using the standard user CH_CM_SID of the system which is created via standard solman_setup and output is shown below for searching change request...........it shows only Z*
Regards
Prakhar

Similar Messages

  • How do I remove a name from the iPhone search function (extreme left page of apps)?, How do I remove a name from the iPhone search function (extreme left page of apps)?

    Even after deleting emails and sms messages, a whole lot still show up on the search page. Ideas?

    You are correct, the Search Function is very powerful. It even retrieves deleted information. If you really want to delete it, only way I know would be to Restore. But if you Restore from Back-Up, some of those unwantd messages and information may crop up again. You may have to Restotre and Set Up as New iPhone.

  • Would like to see a language option added to the app search filter.

    Who would like to see a language option added to the app search filter?

    You can provide feedback here
    http://www.apple.com/feedback/

  • Remove 'Make At' Type option from the Sourcing Rules Form

    Hi Gurus,
    I want to remove/ disable/ freeze the 'Make At' option from the drop down list of 'Type' field under the Shipping Organization block in the Sourcing Rules form. I request you to please reply me back with the solution/ options. I'd really appreciate.
    Thanks in advance !!
    KM
    Edited by: 892964 on Nov 21, 2011 8:30 AM

    You can create a quick when-validate-record personalization that displays an error message if type = Make At
    Hope this helps,
    Sandeep Gandhi

  • How do I remove the "Dock" option from the Apple Dropdown Menu

    I work for a school district where I am continuosly having to go back into Mac labs and reverting the settings on the dock back to normal.  Students are changing the size, position and content of the dock, as well as hiding the dock.  These computers are used by students k-6 and the younger children are getting confused when they com in and they cannot find the dock or its not where it is supposed to be.  I have been able to lock the sizing, position and content of the dock but am not finding a way to elimante the hiding of the dock.  Preferably I would like to remove the "dock option from the Apple dropdown menu.  Please help!!!!

    This question was asked quite a while ago and the suggestion was to use Server Admin Tools, which I know nothing about. You'll have to look into that. If these Macs are running off a server, then this might work for you. I'm seeing that Server Admin Tools from Apple is still current.
    https://discussions.apple.com/thread/287704?start=0&tstart=0

  • How do I remove an icon from the dock of an iMac 10.9.5.?  Dragging doesn't work although I have tried a number of different places.  I recall right clicking used to give me a remove option.

    How do I remove an icon from the dock of an iMac Maverick, 10.9.5?  I've tried dragging different places: desktop, finder list etc.  No luck.

    Drag up towards the centre of the screen & hold for a second or so. The icon will have the 'smoke cloud' appear, let go & it will be removed.
    There should also be a 'Remove from Dock' option in the popup menu. It is in the 'Options' section . ctrl+click will 'right click' if right clicking is disabled.
    If this is not possible the Dock is locked (this may happen on a 'Managed Mac' normally setup by a company or school etc). See your tech support in this case.

  • Saved Search Mailer - remove "Modified Date" from the results

    Does anyone know how to remove Modified Date in the saved search mailer results? Our current results are posted below and we'd like to remove the entire Line of "Modified: xxxxx ".
    5/2 - Read the latest Maximizing Your Benefits newsletter (2)In this issue: What to expect for 2005 Open Enrollment for Staples benefits.Modified May 9, 2005 5:00:45 PM EDT4/27 - Are you ready for Mother's Day? Staples RealLifePerks can help. (2)Be sure to visit Staples RealLifePerks for gift ideas and great discounts.Modified May 9, 2005 5:00:45 PM EDT4/14 - Read the latest Maximizing Your Benefits newsletterIn this issue: Shaping Up the Pyramid Way - the latest US government guidelines on nutrition and exercise, and more!Modified May 9, 2005 5:00:45 PM EDT

    Hi
    I have similar problem. I get follwing message when i run the bat file in dos prompt "SavedSearchMailer got 0 results for this subscriber 0" eventhough sanp shot qury have resuilts. any idea whats causing this
    F:\Program Files\plumtree\jre\bin>"F:\Program Files\plumtree\ptportal\5.0\scripts\SavedSearchMailer.bat" "2399|1121447028|vAqqK6+GDzlFE7xuOkkHSQd7+YI=" 246 "12/07/2005 3:34:47 PM" "Portal Administrator" xxxx.macgen.com.au MACQUARIE N/A N/A [email protected]/html charset=utf-8 "<search_name> savedsearch results for <name>" "<html><body >hhh</body></html>"Starting Saved Search Mailer...SavedSearchMailer invoked with 13 arguments: 0: 2399|1121447028|vAqqK6+GDzlFE7xuOkkHSQd7+YI= 1: 246 2: 12/07/2005 3:34:47 PM 3: Portal Administrator 4: xxxx.macgen.com.au 5: MACQUARIE 6: N/A 7: N/A 8: [email protected] 9: text/html 10: charset=utf-8 11: <search_name> saved search results for <name> 12: <html><body >hhh</body></html>SavedSearchMailer invoked with 13 arguments: 0:2399|1121447028|vAqqK6+GDzlFE7xuOkkHSQd7+YI= 1:246 2:12/07/2005 3:34:47 PM 3:Portal Administrator 4:mgmail.macgen.com.au 5:MACQUARIE 6:N/A 7:N/A 8:[email protected] 9:text/html 10:charset=utf-8 11:<search_name> saved search results for <name> 12:<html><body>hhh</body></html>.SavedSearchMailer accessed saved search 246 and found 1 subscribersSavedSearchMailer processes subscriber #0 - Ranaweera, MahendraSavedSearchMailer got 0 results for this subscriber

  • How to remove upload option from context menu

    Hi all,
    I have a requirment where i need to remove the upload option from the context menu,I tried searching in consumerExploror layout set but dint find where exactly it isavailable.Please help me if u know where exactly it is available.
    Regards
    sharan

    Hi Sai
    Please check these links
    [link2|http://help.sap.com/saphelp_nw04/helpdata/en/75/e000861cb8ad4b8e4f19dd6416346d/framese]
    [link1|http://help.sap.com/saphelp_nw04/helpdata/en/3d/51812c9ba14f4fa104fe3971d5507b]
    i hope this resolves your issue.
    Regards
    Piyush
    pl reward points if this helps.

  • How to get the values of Select-options from the screen.

    The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

    Hi,
    Refer this following code..this will solve your problem...
    "Following code reads value entered in s_po select options and willprovide search
    "help for s_item depending upon s_po value.
    REPORT TEST.
    TABLES : ekpo.
    DATA: BEGIN OF itab OCCURS 0,
    ebelp LIKE ekpo-ebelp,
    END OF itab.
    SELECT-OPTIONS   s_po FOR ekpo-ebeln.
    SELECT-OPTIONS s_item FOR ekpo-ebelp.
    INITIALIZATION.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
      DATA:
      dyn_field TYPE dynpread,
      temp_fields TYPE TABLE OF dynpread,
      zlv_dynpro TYPE syst-repid.
      zlv_dynpro = syst-repid.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname     = zlv_dynpro
          dynumb     = syst-dynnr
          request    = 'A'
        TABLES
          dynpfields = temp_fields
        EXCEPTIONS
          OTHERS     = 0.
      LOOP AT temp_fields INTO dyn_field.
        IF dyn_field-fieldname EQ 'S_PO-LOW'.
            SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
            WHERE ebeln EQ dyn_field-fieldvalue.
            EXIT.
        ENDIF.
      ENDLOOP.

  • How to remove characters/lines from the beginning of an InputStream

    Hi,
    I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is there an easy/simple way of doing this?
    One option I thought would be to read the char by char until 2 end of line chars have been detected and then read the rest of the data to a buffer. And the create a ByteArrayInputStream out of this buffer. Problem with this approach is, that the amount of data can be large, so putting all the data in to memory might cause problems.
    Another option is to use BufferredInputStream and use the readline() method twice to get rid of the lines that are not needed. After this I would write the data to some output stream, which is then converted back to input stream. Propably would work, but sound too much of work for a simple thing like this. There has to be better way.
    To make it simple, what I need is a method that looks like the following, or something similar
    *  Removes n number of lines from the beginning of a InputStream.
    *  @param is InputStream where the lines are removed
    *  @param numberOfLines int value to indicate how many lines whould be removed
    *  @return InputStream where lines have been removed.
    public InputStream removeLines(InputStream is, numberOfLines);Thanks.

    Here's the code, feel free to use it. Comments are also welcome.
    public InputStream removeLinesFromTheBeginning(InputStream is, int numberOfLines) throws IOException
              char c = 'c';
              int i = 0;
              for(int n = 0 ; n < numberOfLines ; n++)
                   do
                        c = (char)is.read();
                        System.out.print(c);
                        if(c == (char)-1)     // end of stream reached before any newline characters were found.
                             return null;
                        i++;
                   while(c != '\n');
                   System.out.println();
                   System.out.println("Characters removed:" + i);
                   System.out.println("n: " + n);
                   i = 0;
              return is;
         }Edited by: dave_spaghetti on Jun 16, 2009 5:42 AM
    Fixed a bug.

  • How do I remove an app from the update list that is under someone else's apple id?

    How do I remove an app from the update list that is under someone else's apple id? So this way the update always fails because it asks for someone else's password. I don't have the app on my mac, it only appears in the update list. It's just annoying, because the update keeps appearing, and the reminder keeps reminding me that I should install a new update.

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
    1. Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    2. In the Finder, press command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
    Other...
    A sheet will drop down. In that sheet, select
    Raw Query
    as the criterion, then click OK or press return.
    Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
    4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
    Quit and relaunch the App Store. Test.
    If you find these instructions confusing, ask for an alternative method.

  • How do I remove standard apps from an iPhone 5?

    I am an IT in a government office who just switched our fleet to iPhones.  We are not permitted to use certains apps that are either not in our data contract, touch the Cloud, or cause cost/personnel issues.  Those items I try to corral in a folder "Unusable Apps" on a separate page where the user has little eye contact with them (outta sight outta mind right).  I go through the motions of turning off every notification, update, share feature, etc. I can find but the icons are still on the phone.  I have a fleet of about 100 iPhones and at least half my users are sneaky & curious and often try to reactivate things I have already hidden or turned off per our agency telecommunications policy.  I just want them removed all together so I don't have to keep going through this and for those who can't fight temptation - they won't have to anymore.  How do I remove standard apps from an iPhone 5?

    You may want to repost this in one of the iPhone for Business forums:
    https://discussions.apple.com/community/iphone/iphone_in_business_and_education
    You'll want to ask about Configurator.
    My company uses iPads as part of a Point of Sale System. They have restricted access to many of the built in apps and deployed custom apps.
    Best of luck.

  • I can using AirPrint from safari and email to my hp printer but do not get print as an option from the pulldown menu from the new york times and other apps. How can I print directly from these apps?

    I can't seem to print directly from apps like the new York times. Print is not an option from the pulldown menu. Print to my hp printer works  fine from safari and email though and from some other apps. Do some apps not permit printing? That doesn't right.

    sadie1 wrote:
    Thats funny. If go to ny times on safari therebis a print icon and no problem printing. On the app -- and I am a paid subscriber -- no print option ...  
    You can ask the NY Times why not.
    Standard behavior is that Airprint always works with iBooks, Mail, Photos, and Safari.  Apps are up to their author.
    http://support.apple.com/kb/ht4356

  • How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

    How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

    If you are unable to empty the trash, try holding the Option key while selecting Empty Trash.
    Otherwise, some steps in the following link may help you.
    http://support.apple.com/kb/ht1526

  • HT2905 How to remove duplicate songs from the iPhone when the duplicates are not listed in the iTunes library on the computer.

    How can I remove duplicate songs from the iPhone4. The duplicates are not listed in the computer iTunes library.

    The simplest thing may be to back-up and then restore the iPhone. If you don't fancy that then remove all media that is currently synced to it, then double check and manually remove any media that remains on the device, before reselecting your sync options.
    If you've been manually managing the device and your library doesn't contain copies of all your media then see Recover your iTunes library from your iPod or iOS device.
    tt2

Maybe you are looking for