Removing stock from providers

Hello,
We have the following scenario:
1.     We send material to several providers. The material is sent using tx-MB1B movement 541.
2.     The providers spend material delivering it to the customer
3.     Our salesmen create sales orders that contain the sent items delivered by our providers (point 2).
The question is: how can I remove the material from the stock of the provider through the sales orders?
Thanks in advance,
Ricard.

Hi ,
The movement type 541 is for subcontracting  and system will show stock as stock with subcontractor.
in such case u cannot deliver from the subcontractor to end customer.
you can alternately do
1) use the consignment process with document types as described above , this would alow you to store stock with provider and later update the stock when it has been finally delivered to end customer
2)  provide overiew of exisitng stocks at any time point
3 ) all can be acheived with std SD process
reward points if usefull
thanks
Akash

Similar Messages

  • Error when using 557 movement type to remove stocks from intransit

    Dear All,
    We have some stocks left in intrasit where we use only inventory management to do this stock transfer(ie. we are not using STO),now we want to remove this stock from intransit. When i tried to use movment type 557 I got an error (Deficit of PL Stock in transit 10 DZ : CHS10088 2KUR 0000000867) with message number M7021. I cross this material with mb52 to find the avalability of this intransit stock and found that it  is available at given plant but with out a batch number. When I tried to use this movement type it asks for a batch number so i have given an available batch number. Can you please help me to remove this stock from intransit.
    Thanks & Best Regards,
    Chameendri

    Hi
    the movement types 557 ( and 558 ) can only be used to update intra-company
    transit stock which is saved in MARC-TRAME. IF you are using purchase
    orders  cross-company stock transfers, the transit stock is only a virtual transit stock what is calculated
    based on the purchase order history. So this issue cannot be addressed
    by changing the data in a stock table.
    Are you using intra-company STO ?
    Please check carefully note 392205  that contains the report ZTRAME
    .Please see the following information:
    A report attached to the note 392205 tries to explain the stock in
    transit using the documents existing in the system. First verify the
    current stock in transit situation using the report ZTRAME as per the
    note 392205. This program tries to 're-calculate' the stock in transit
    based on the material documents and the purchase order history.
    Based on the results of the program the movement-types 557 and 558 can
    be used to correct the stock in transit (-> add or book out stock in
    transit).
    I hope this can be of help
    BR
    Nadia Orlandi

  • Remove stock from Quality Inspection

    Dear All,
    In material master by mistak quality inspection flag was active in packing material with 01 inspection type.
    When we received material it goes for quality inspection after MIGO. So in MMBE it shows in Quality Inspection.
    Now the Plant in which MIGO was prepared has no quality related data maintained.
    We tried to reverese MIGO document but system not allowing to do as srock is in Quality inspection.
    Is there any way to reverse the MIGO or moving stock from quality to unrestricted?
    Thanks in advance,
    Nirav

    Did you identify the original material document and then try MBST transaction to cancel the document?
    When you use the term "reverse" it sound like you are trying to do a 102 against the 101.  You can't reverse the transaction, you have to use MBST to cancel the transaction.
    Otherwise you have to set up enough QM data to process the lot.
    FF

  • Removing stock from the provider

    Hello,
    We have a Stock Material Provider to Vendor. We send material to our provider using tx-MB1B movement 541 (Trfr pstng to stock with subcontractor form unrestr. u2013use st.).
    When a sales order is confirmed a purchase requisition is created and its purchase order. Which type of movement do I have to do to remove the material from the stock of the provider? (the provider is the one who give directly the material to our client).
    Thanks in advance,
    Ricard.

    Hello Csaba,
    We have the following scenario:
    1.     We send material to several providers. The material is sent using tx-MB1B movement 541.
    2.     The providers spend material delivering it to the customer
    3.     Our salesmen create sales orders that contain the sent items delivered by our providers (point 2).
    The question is: how can I remove the material from the stock of the provider through the sales orders?
    At the moment, the way to do it is the following:
    1.     When the sales order is confirmed, a purchase requisition is created.
    2.     A purchase order is created using the purchase requisition
    3.     A goods receipt is done using the purchase order
    I am not sure which type of movement I need at point 3. Maybe this behaviour is not correct.
    Thanks in advance,
    Ricard.

  • How to remove stocks from notification on iPhone 6

    i can't find in settings

    Go to the bottom of the "Today" section in Notifications Center itself. Tap "Edit". Remove the things you don't want to see.

  • Remove STOCKS without voiding warranty!

    How can I safely remove STOCKS from my iPhone? I will never use this, nor will I ever wish to use this. A search for "remove stocks iphone" on google represents 588,00+ results of distressed people. Many people suggest I crack my iPhone. This worries me.
    I have already moved it to a secondary page, I just want to REMOVE it without voiding my warranty. If there is NO way to remove it at this time, when will apple have a solution, or when do they plan on having a solution. If more than 1 out of every 6,000 americans (500,000 results) desires to remove stocks from the iphone, Is this not something which should be undertaken and Post-Haste?

    Excellent suggestion to give apple feedback on how users feed about this issue. I would anybody who feels aggrieved or annoyance to send in their feedback. The more people who send in the same message, the more likely Apple with hear it, lest they become irrelevant (or at least continue to have reluctant and not fully satisfied customers).
    To this end, I have cut and pasted (another capability that that the iPhone ought to have) my feedback to so that you may copy and amend in their feedback to Apple (as they see fit).
    "Just wondering where the instructions are for removing preinstalled programs/applications on the iPhone 3G such as "Stocks".
    Many years ago, Microsoft encountered major legal strife with the Department of Justice for not allowing users to uninstall Internet Explorer on its Operating System on the antitrust (uncompetitive) grounds, and I see striking parallels with the current difficulties that iPhone 3G users are facing with the iPhone 2.2 software."
    As a footnote: that application is on page 6//6 of my iPhone.

  • How to remove the stock from 916 -storage type

    Hi experts,
    In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
    How to remove the stock?
    Regards
    vr

    the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
    if the delivery is already goods issued, then you have to use LT01 to move the quants.
    The positive quant of 30 quantity can be moved to the place where it phyiscally is.
    the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse.  so you move from this bin to 916.

  • How to Remove the Stock from 916

    Hi All,
    I have a few questions Related to WM.
    1. Our End users are able to do the PGI Without Confirming the Transfer Order. Once they Do the PGI.After doing the Billing they are coming abck and saying that the stock shud not Present in 916.
    Would you please let me know how can I clear the stock from storage type 916 and the bin created with Delivery number.
    Is there any Possibility to Remove the stock from 916......?
    Waiting for your Response .............
    Sai Kumar

    Hi
    What our friend is saying is that in the config for item categories for deliveries if you set this flag it means that the PGI wont happen unless the TO creation and confirmation are both at status 'C'
    Also ABAP techie
    I see  we asking for points again, what are you going to do with them when you get them?
    I dont think that this is the point of this Forum!!
    Regards
    Frenchy

  • Removal of stock from subcontractor place

    Dear Team,
    I have issued the excess child material quantity to subcontractor. Now the job is completed. GRN is done.
    Now i want to remove this excess stock from subcontractor place and put it in my stock.
    Whta are all the steps required.
    Thanks & reagards,
    R.Saravanan

    hi,
    You can do the consumption posting using 542 mvt type from MIGO...
    You post the GR form 101...
    and later pay to vendor for this consumption...
    Regards
    Priyanka.P

  • Removal of Stock from Inventory

    Hi Gurus,
    I was wondering what is the best way to remove inventory (unrestricted stock) from a plant. Have a client that basically whats to dispose of a bunch of inventory to make room in warehouse for new stuff. Any ideas?
    Thanks in advance!

    Hi,
    Did you Create a  Cost Center for dispose of a bunch of inventory .If not create Cost Element for dispose of inventory(KA01) and Cost center for dispose of inventory (KS01).
    Use MB11 or MB1A  T.code  with 551 Movement type and issue the  dispose of a bunch of inventory to dispose of a inventory Cost center.
    If helpful then reward.
    Regards,
    Biju K

  • How to Remove Stock (Damaged Goods) from System?? MIGO Mvmt Typ - 555

    Dear Xperts,
    I have STO Scenario, where we use MIGO for GR at receiving Plant/Depot.
    In case of Damaged Goods
        10.00 MT    (STO Qty)
      =
          9.50 MT    (Received at destination Plant/Depot)
      +  0.50 MT    (Damaged Goods)
    We receive Damaged Goods in specific SLOC (ABCD) and raise Debit Note to Transporter for that Quantity... So we get the value in the Accounting.
    But we still have this STOCK in the system...
    How to remove this stock from the system?????
    (without accounting effect.. B'coz we already have the accounting effect in the system..)
    I tried Movement Type - 555 but still it gives accounting effect...
    Any inputs..??
    Thanks & Regards,
    HP

    How to remove this stock from the system?????
    (without accounting effect.. B'coz we already have the accounting effect in the system..)
    You can use MB1A / MIGO + 551 / 553 / 555 as it was laready told by you.
    "Accounting effect" is not totally clear... If your material is valuated (and I assume it is), you cannot get rid of with w/o generating accounting document (normally).
    One idea:
    If your transporter exists in SAP as a vendor (I suppose it), you can create a return PO (PO item with return flag) and post a GI by mvt 161 to your vendor. After that your vendor (transporter) sends you a credit memo - so, in this case no scrapping is needed.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63341243a211d189410000e829fbbd/frameset.htm
    Regards,
    Csaba

  • My wife's Apple ID is shown as belonging to a family sharing group, but we can't determine what is the id of the owner.  How can she remove herself from the group?

    my wife's apple ID is shown as belonging to another family sharing group. We can' t figure out the  Apple ID of the 'owner' of the group.  Is there any way to remove oneself from a family sharing group when you are not the owner?  Or how can we find the log in id (Apple ID) of the owner?

    i partially solved the problem, however still need some help.  My wife has made purchases under two different Apple ids.  I tried t re-set her iPad with her main ID but it is apparently part of a family.  I re-set  her iPad iCloud using her secondary ID.  The sharing of iTunes shows her main apple ID.  The settings iTunes is also set to her main Apple id.  I sent an invite from her iPad icloud family sharing to her main Apple ID, but when I attempted to consent to join it says she is already a member.  So I am guessing this is because in the family set up under her secondary ID that her main id is the iTunes account that is shared.  My question is could I change the iTunes shared under her name as owner to her secondary account, then invite her main account to join as a distinct member?  I am nervous about doing this for two reasons 1.  There is a warning when changing the shared iTunes account that says you can't join another group for 90 days. 2. I may still get the message that her main account is still a member of the group even though it doesn't show up, and then not able to revert back.
    if you follow this can someone offer some help,
    thanks
    note. This whole problem when we had to change a Apple id when we changed Internet service providers.

  • How to remove stocks, weather,clock, notes, reminders, youtube, game center calc, voice memos,calendar, maps, and stocks? As a person who blew 300 bucks I think I should have a choice if I want to remove this crap but can't figure out how.

    How to remove stocks, weather,clock, notes, reminders, youtube, game center calc, voice memos,calendar, maps, and stocks? As a person who blew 300 bucks I think I should have a choice if I want to remove this crap but can't figure out how.
    any help would make me happy. As it stands now from looking on the web it can't be deleted but making sure before i return this ipod touch. I wan't a clean item the way I wan't it and not how they want it. Like I do not need Itunes and App Store on this ipod because I use my computer only to shop, So many things i like out of the ipod and I am sure lots more people also would like a cleaner ipod/phone or what ever.
    from looking at what I never use I see a total of 14 app's I not want taking up space and my screen.
    yup with the 5.0 came another stupid icon i not like. ( Newsstand )

    yes i moved them into a folder, but I not want them at all on my screen. Guess I return this and pick up a
    Zune HD
    less app's on that then ipod touch. thank you for the responce.

  • Issue while removing stock using MB1C - 562

    Hi,
    Our client has few materials for which batch number is captured in small alphabets and now when we are trying to remove stock using MB1C - 562 system gives error of Deficet Qty as it automatically changes small letters to CAPITAL letters as soon as we press enter on MB1C. We are doing stock removal activity as client is migrating from old SAP system to ECC and we have to remove stock data from old system.
    We are using an ABAP program for removing stock but in background it uses MB1C - 562 mvt type but for few materials we are getting this issue of small letters.
    Please let me know if there is any way we can remove these stock records with small letter batch number via 562 mvt type
    Thanks,
    Vihaan

    As I already said: no matter what movement type you use, you cannot make SAP posting this batch number.
    Find out the way how this stock was posted into SAP. and use the same way to get it off SAP.
    I think you have to convert the batch number into capital letters before you can goods issue the stock. For this you may need to create an own report that does a hard update in SAP tables MCHA, MCH1 and MCHB (maybe more ... I cant look into your system, you may have to contact SAP to get help which tables need to be amended or which conversion exit needs to be switched off)

  • Unable to clear Stock from Inventory

    Hi All,
    We have a issue where in user is unable to clear stock from inventory , basically these stocks are sales order stocks. When we check for sales orders they are not available in the system now.
    When we try to do MB1B using movement type 413E, we get the error message saying the sales order does not exist.
    Kindly reply  is there is any way to clear this stock as the sales order is not existing in the system.
    Regards,
    Gopal

    Please check this answered link:
    Re: Material showing in system.
    how to scrap sales order stock if the referenced sales order is deleted.
    Remove Sales Order Stock from MMBE.
    Re: deleted sales order
    Edited by: Afshad Irani on Jun 1, 2010 2:41 PM

Maybe you are looking for