Removing the initial Import Settings Dialog

i want Removing the initial Import Settings Dialog for all users and any new profils

See https://bugzilla.mozilla.org/show_bug.cgi?id=286557#c38 (comments 38 and 39)

Similar Messages

  • What are the best import settings for iTunes - AAC 160 / AAC 192 / MP3??

    Hi I originally imported all my treasured CDs to iTunes several years ago, and they've served me well (AAC 128 - default setting) but in recent times hard-drive sizes have trebled and my much loved iTunes Library has not been updated.
    I am thinking of re-importing all of my original CDs - as I think now that hard-drive space would allow for a higher quality but at the same time I do not want to fill my hard-drive completely with music - hence my question;
    WHAT ARE THE BEST IMPORT SETTINGS CONSIDERING SIZE AND QUALITY?
    (I know this has probably been asked a million times, but I did a search and nothing came up that answered my Q - also all the answers that came up in Google search where dated 2003/ 2004 - a little out-dated me thinks!!)
    Rachael

    Personally I've started ripping everything Apple Lossless. That way I hope I never have to rip again.
    I used to rip 320 mp3. I couldn't tell the difference between 320 mp3 and lossless, but, one day I might be able to - big maybe. But since disk price is not likely to go up, I figured I'd rip lossless from now on "just in case."
    Probably few, if any, people could tell the difference between 256 AAC and lossless (I've done it at 192, but never at 256, and I have not bothered trying again recently - there might be a song out there where I could hear the difference, hence ripping lossless from now on - my time costs more than disk space . . .)
    256 AAC is a pretty safe bet, unless you need mp3 compatibility, then use 256 (or 320) mp3.

  • How do I remove the Notification under settings after updating IOS 8.1 ?

    How do I remove the Notification under settings as I have the latest IOS 8.1 on an ipad mini retina display?

    System requirements for Continuity on iPhone, iPad, iPod touch, and Mac - Apple Support

  • AS CS3 - Setting the EPS Import Settings

    I am trying to create an applescript that sets a whole series of preferences in Indesign CS3 so I can quickly and easily synchronize my studio with the same settings.
    It had been going well until I was stumped by the EPS Import Settings of which I want to have clipping paths applied and I want to rasterize the postscript for the proxy.
    I have tried something like this:
    tell the EPS import preference properties
    set EPS frames to true
    set the EPS proxy to "Rasterise the Postscript"
    end tell
    Of course I am failing big time somewhere, any help would be greatly appreciated.

    On 3/9/08 10:27 AM, "Dylan" <[email protected]> wrote:<br /><br />>    set the EPS proxy to "Rasterise the Postscript"<br /><br />The two options for EPS proxy are "always" and "as needed" (without the<br />quotes).<br /><br />-- <br />Shane Stanley <[email protected]>

  • How do I move the camera import settings in the list?

    I'd really love to delete all of the LR import presets since I never use them. It's a long list and my camera profiles, which  I do use are always at the bottom. I want them at the top of the list...if I can't delete all of the ones I never use.
    How do I do either one of these things?
    If Adobe doesn't allow the presets to be deleted, they need to think about that for the next rev. It's a hassle in workflow to keep scanning this list.
    Thanks!

    Ed,
    You're mixing up a few things here.
    The creative develop presets are not contained in folders but built into LR. They can be removed by what's described in Sean McCormacks article I quoted (I've never tried it).
    Camera Profiles don't show up in develop presets as such, but in the Camera Calibration tab in Develop. They need to reside in the folder "C:\Users\[user]\AppData\Roaming\Adobe\CameraRaw\CameraProfiles" or "C:\ProgramData\Adobe\CameraRaw\CameraProfiles" in order to show up in Camera Calibration.
    If you want to use a specific camera profile during import, or otherwise by applying a preset, you have to assign the specific camera profile to one image and then create a preset with the settings of that image (possible by just ticking "calibration" in the settings to be included in the preset). You can then use this preset during import.
    Another option would be to make the use of one camera profile a Default in LR for a specific camera model, which then would be used for all images of this camera model upon import.
    Beat

  • Where is the new  "import settings"  tab in itunes preferences... ????

    when i go to itunes>preferences>advanced to set my file size setting for choosing what kind of file i want my song to be on import, i see no tab for import settings like before....... also checked itunes help and it didn't say it was in a different place......help??

    They are here:
    iTunes Preferences/General/Import Settings

  • Is it possible to remove the Last Import selection in Photo Albums?

    I've got a first gen iPhone on 2.0 and was wondering if it's possible to remove Last Import from the Photo Albums screen. I've checked for options in iPhone's Settings and in iPhoto's Preferences but haven't found anything useful.
    Suggestions? Thanks.

    HI,
    you will  able to disable the group tree icon panel when the crystal report opened. to do this,follow the steps mentioned below.
    1. Go to your BO installation folder and then tomcat folder and then choose the CrystalReports web application.
    C:\Program Files\Business Objects\Tomcat55\webapps\CrystalReports
    Now change the web.xml of the this web app and insert a context parameter
    <!-- Added to remove group tree panel shown as default -->
    <context-param>
    <param-name>viewrpt.groupTreeHide</param-name>
    <param-value>true</param-value>
    </context-param>
    Restart your tomcat, or restart crystal report web app from tomcat manager.
    you can remove or add or disable the group tree icon as per your requirement.
    Let me know if this works,
    Regards,
    Rameez

  • The print window settings dialog box will not come up

    When attempting to print a website, I need to select the option to print as laid out on the screen as described in this how-to: https://support.mozilla.org/en-US/kb/how-print-websites#w_print-window-settings.
    However, I have attempted to get this dialog box to come up on 4 different machines that all have Firefox 32 installed and updated. The operating systems of the 4 machines were 2 Windows 7 64bit, 1 Fedora 20 64bit, and Windows 8.1 64bit.
    It appears that using the print button launches the print preview screen. Pressing CTRL+P does not open this page either. Is this something I need to change in about:config? I already reset all the printing settings and reset firefox on these machine to see if that was the issue.
    Please let me know how to correct this behavior.

    On Windows 7 and Windows 8.1 systems, it does not come up. I did try disabling the pop-up blocker, but it just won't load the dialog box. It is driving me a bit crazy.
    And Office 365 does put the email out to a new window, but it still has frames :(. Microsoft's support forum advised setting IE and other browsers to print as displayed. The issue is I can't seem to figure out how to get that dialog box to come up. I have tried disabling the native dialog box in about:config, but didn't have any success with that either

  • How do I re-size the Password Security -Settings dialog box when Encrypting with a Password?

    My dialog box is extremely large and the OK and Cancel buttons extend off the bottom of my monitor.

    Yes, I have the same problem! It is driving me crazy as I don't have a clue what code they want me to put in and now everytime I try a new one my phone is disabled and I have to wait half an hour until I can try another one! It's ridiculous!!!
    I am praying that someone finds a solution soon!!!

  • I have an apple desktop PC, but I need to remove the initial person who set up the PC in their name, how do I remove them, I have an apple desktop PC, but I need to remove the initial person who set up the PC in their name, how do I remove them

    How do I remove a person from the computer, when it was new the person registered themselves

    I don't know OS X server but presumably it's a lot like Mac OS X in which case all you need to do is going in System Preferences -> Users & Groups -> Click on the lock at the bottom left if it's locked to unlock it.
    Then you select the user account you wish to delete and click on the minus sign under "Login Options" in the bottom of the users table.
    As far as I remind it will ask you wether you want to delete or not the selected user's data.
    PS: you need an admin account to do that. If that user you want to delete is the only one then you must create one using the plus sign instead of the minus one and check the "Allow user to administer this computer" box. Then log out from user #1 account and start a new session with your new account.

  • What is the best import settings to use?

    I want the best quilty for listing and reburning CD's

    For quality the best setting is AIFF, which is the format that your CDs are already in. However AIFF files are large and will take up a lot of hard drive space. MP3s imported at iTunes higher quality 192kbps setting are a good compromise between quality and size and can be burnt to MP3 CD. However you need to check that your CD player is MP3 compatible, most newer ones are.

  • ACC custom import settings

    I have asked this before and have never received a responce. Years ago you could set the ACC import settings to always import in mono; I have a hearing disability and need this setting. Apple removed to option of customising the AAC import settings and, despite requesting it be reinstated, they continue to omit the fuctionality from iTunes.
    Why do they continue to discriminate against people with monotorial hearing or deafness in one ear?
    Is it worth taking this forward through the UK discrimination laws?
    Why will Apple not reinstate this function?

    Swaish,
    The AAC Custom dialog is working normally for me, including the ability to set Mono.  This is on iTfW 10.6.  However, I have seen similar complaints to yours expressed on the Forum, so it in fact may have a bug in some versions.
    Just to give it a kick, try resetting it to something else, OK out, restart your machine, and then try again to use the AAC Customer dialog.  You can also try the MP3 Custom settings (instead of AAC) and see if Mono is working normally. 
    If neither of those will shock it into submission, submit a complaint to the Apple Feedback page:
    http://www.apple.com/feedback/itunesapp.html

  • Can't close Sun-specifc settings dialog box

    Dear All,
    I cannot close the sun-specific settings dialog box when I attempt to create my mappings for my CMP entity beans from the Schema. Close button will not function. Also I can still go through to the Create Mappings window but it doesn't allow me to select my schema to generate the mappings. Whether this means it can't find the Schema file? I have checked and this is present in the JAR file and saved.
    I managed to create some mappings earlier today but have not been able to since. I have restarted the container, desktop, removed the EAR and created a new one. Still the window seems to fail every time. The log for the domain doesn't show anythign peculiar either.
    Appreciate any help
    Thanks in advance

    On the left tree view select the EJB bean and then click on the Entity tab. In the Fields To Be Persisted box do you have any fields checked? For each CMP bean at least one field should be checked to be persisted.

  • Change Default Import Settings

    This has bugged me for a while now. I have created an Import Preset to import my photos to my "F" drive. Works perfectly but sometimes...the import Preset reverts to the original Lightroom Import setting which imports to my "C".drive. If I right click on my Import Preset, my Import to "F" is checked.
    How can I prevent LR4 from reverting to the default import settings and is there anyway to either remove the old default altogether or make my Import to "F", my default?
    Bob

    I found a previous post that appears to work.  Since the netbook doesn't show an OK in the preference window, I just had to hit enter to accept and change the setting. 
    Thanks to all.

  • Auto Import Settings needs same robust features as regular Import Photos feature...

    Hello,
         It is disappointing to not be able to select the feature to auto convert RAW images to DNG as well as copy/move files to subfolders (in my case date folders) using the Auto Import Settings feature in LR 3.3.  The main intent of my usage is not for tethered shooting as the feature may have originally been setup for, but moreover to import images from my Eye-Fi Pro SD card automatically to my LR catalog.  In fact, this limitation makes the auto import completely useless for me as I have to remove the SD card and mount it (or tether camera via USB) and import standardly.  Please make a stronge effort to unite the functionality of all import functions in LR and allow the customer to choose which settings work the best for their needs.
    Thanks,
    ~David

    The Eye-Fi Pro X2 (8GB) handles RAW imagery uploads, and does so in a pretty quick manner.  I have a Canon G9 that I use the Eye-Fi in and it's RAW images take about 4 seconds per 12.1 MP .CR2 image which isn't too slow for me really.  I am also right next to the access point so the wifi signal is stronger and transfers are therefore a bit faster.   I use this card also with ShutterSnitch (for iPad) and a 1DS Mark III for location shooting so the AD can monitor shots remotely on the iPad and not have to look over the shoulder at an LCD screen or through a loupe.  At any rate, I also have a few other gripes about what LR should be doing with imported images that it isn't currently that seem like big misses, but I will add these to another feature request.

Maybe you are looking for