Removing the little plus sign in a fillable document

Hi everyone,
I hope someone can help me resolve this issue.  In a fillable document where texts are entered, there is always a little plus sign in the field/space where a little plus sign (field expander?) appears.  When printing it out, it does not look too good.  What's the way to remove this little plus sign? Thanks so much in advance for reading and taking the time to reply to my question.
Kai

Make the field size large(?).
Or, Font Size to automatic (or smaller)?
Be well...
Message was edited by: CtDave

Similar Messages

  • Why don't I see the little plus sign (+)

    Why don't I see the little plus sign(+) to the right of an open tab? The one that allows you to open a new tab? I updated two other computers and there's no problem (one is using XP and the other is Windows 7). I can open a new tab by pressing "ctrl t" but I don't want to do it that way.
    Anyone else have this issue? Should I try reinstalling the update?

    Hello! Thanks for your question.
    See if this works for you. Sometimes the problem is caused by a corrupted file.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. Note: This will cause you to lose any Extensions, Open websites, and some Preferences.
    To Reset Firefox do the following:
    Go to Firefox > Help > Troubleshooting Information.
    Click the "Reset Firefox" button.
    Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    Firefox will open with all factory defaults applied.
    Further information can be found in the Reset Firefox – easily fix most problems article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I have the little plus sign for a new tab, but when I click on it, it won't open. I can't get any additional tabs open.

    I can also right click on the "new tab" sign, and click on new tab and still I can't get a new tab to open. Never had this problem before.

    iirc there is a compatibility issue with the Ask Toolbar, and I think your Sytem Details indicate you may be using that, try disabling or uninstalling the Ask toolbar to see if that solves the problem.

  • How to finally get rid of those annoying little plus sign boxes in a table

    Hello everyone!
    Pages treat table cells as a _*TEXT BOX*_
    If those +*annoying little plus sign boxes*+ are popping up, do this to get rid of them:
    1. Open Inspector
    2. _*Select all*_ on your table
    3. Click on T
    4. Click TEXT
    5. GO to _*INSET MARGIN*_ and SLIDE until the little plus sign boxes disappear.
    FINALLY the boxes are gone!

    Hej Fruhulda
    Obviously you are one of the fortunate ones who has never had to deal with the dreaded little box with an X in it!
    All of us here were seeing it all the time up until yesterday and it was driving us CRAZY!!
    Imagine this:
    You are trying to get some work done in Pages
    In a table
    You add some text to a cell
    Then you find out that you have to make the table smaller because
    suddenly you have to insert another table on the page
    As you are making the table smaller
    AHHHHHHHHHHHHH
    Inside the cell with the text *a little box with an X in it appears* and will not go away.
    If you are working with MANY cells in a table
    You are looking at A LOT OF LITTLE BOXES with X's in them.
    Suddenly you feel *SEA SICK* looking at all those little boxes
    You read the entire iWork Manual line by line BUT cannot find anything to HELP
    Your project is not a numbers candidate
    You have been a mac user for YEARS and YEARS
    You know your macs, you know your mac issues
    WHAT TO DO
    I am sure you can see the dilemma we were in!
    Then all of us realized that this is similiar to a text box issue and cell padding issue from our Adobe CS suite programs and sure enough it WAS!!
    That is basically the problem ALL of US were having.
    So if our solution can help anyone - *WE ARE GLAD*
    because they were probably getting *SEA SICK TOO* trying to get some work done
    Thank your lucky stars you did not ever have this issue pop up on a deadline!!
    Have a great day
    ( I miss my Östermalmstorg FIKA in the afternoon)
    Big Al

  • Text in Illustrator CS6 displays the red plus sign but there is no overset text. How can I remove?

    I have some text blocks in Illustrator CS 6 that display the red plus sign that indicates overset text but there is no overset text. It occurs in files that were created with earlier versions of Illustator and now we are reworking them. It can't be deleted. I have cut the text in the box and pasted it into a new text box to no avail. It is not a screen artifact. I have tried copying everything in the file and pasting it into a new file and the little red plus sign comes along. It doesn't print, of course, but is driving me crazy...

    I just tried, but the text is point type, not area type, so expanding the box makes the type bigger and doesn’t show extra space that might  be there. Looking at the hidden characters doesn’t show any extra returns. I also have a few of these plus signs that seem to be completely disembodied, just floating in space apart from any visible text. Thanks for your suggestion, though.
    Amy
    starry-logo-Fifth-Press
    Amy O'Donnell
    Fifth Press
    444 East 200 South
    Salt Lake City, UT 84111
    801.433.6274
    <mailto:[email protected]> [email protected]

  • Annoying little plus sign on shapes

    I am putting several shapes together in Pages for use in another program. I do a command-shift-4 screen shot, open the little PNG in Preview, save it as a jpeg, and load it into the other program.
    I discovered I could make a shape editable so I could create new shapes. Cool. But then they get this doofy little plus sign on them. I do not want it in the jpeg. How do I get rid of it?

    No text is in the shape. Say I want a quadrilateral, a non-rectangular, non-regular quadrilateral. I start with a Pages square. Then. Whoa! That's it. Even though I am not doing a text thing, Pages thinks I want to so it is warning me that my shape is too small. Let's fool Pages into being more cooperative...
    I went into the shape and made some text and selected it and set the font size to 4. Then I deleted the text, since I didn't want it in the first place. Now the plus sign is gone and it looks like I want it to.
    Thanks for the question that turned out to lead me to the fix.

  • Why does my safari close when I try to open a new safari window/tab with the white plus sign?

    Every time I hit the white plus sign the whole window closes. I just got this ipad from a friend who erased it. This has happened since I set it up and I have tried resetting it twice. Please help.

    Pieter, thanks for starting your own new topic!
    That is an old version of Safari.  Where did you say you got it from?
    Do you have a backup of your 10.7.5 system?
    You should update it to 5.1.7.
    Can you download from here?
    http://safari.en.softonic.com/mac/download

  • My Macbook starts up, goes to the white screen with the gray apple, the little loading sign loads, and color wheel appears, and DOES NOT STOP PEIROD!

    My Macbook starts up, goes to the white screen with the gray apple, the little loading sign loads, and color wheel appears, and DOES NOT STOP PEIROD!
    Even when I restart, shut it down; or when it runs down to no battery, when I plug in the power cord for a while, it loads up to the same stinking screen!
                                                      PLEASE HELP ME!

    Restart the computer and immediately hold the option key down.
    If the computer boots and you see two hard drive icons, use the arrow key to select the Recovery drive, and press Return.
    You will get to a screen that looks like the image here:
    http://www.apple.com/osx/recovery/
    Select the fourth item and press Return.
    In Disk Utility, select the hard drive in the left column, then First Aid, then click on Repair Disk.
    When that is done, quit DU and restart the computer.

  • I cannot remove the rotate screen sign on the upper right of my iphone5s, how can i remove it?

    My iphone is locked & can't be rotated, tgere us a sign but I cannot remove the rotate screen sign on the upper right of my iphone5s, how can i remove it And rotate the phone ?

    Locking Orientation
    (Note that I am affiliated with this site, it contains a donate button, and some pages contain ads).

  • Little plus sign in the bottom right of cell

    I am new to Numbers. I just set up a spreadsheet with a date. I went to the inspector to specify the format for the date, I did the time as well. When I went back to my cell there was a plus sign which I took to mean that there was more content. So, I looked and saw the time. I took out the time in the inspector but the plus sign is still there. Does anyone know why?

    This behaviour is clearly described in the Numbers User Guide which every user may download from the Help menu.
    Your cell width is too small to accomodate the embedded value.
    Enlarge the column or change the font size.
    Yvan KOENIG (VALLAURIS, France) mercredi 21 avril 2010 07:24:43

  • Little plus sign box

    I'm using text boxes in layout format of pages...
    some of the text boxes I have made small enough to only hold arrows as part of the pictorial diagram.
    2 of them (and they print as it has happened to me before) have little plus box tabs and do not "disappear" with the regular outlines of the text boxes when you click out of them.
    thanks for any help telling me how to "remove" these.

    M,
    Another way to state the problem that the + sign is trying to warn you about is this: "Not everything you put in the document is going to be visible on the screen or in a printout."
    If you think you're disappointed now, wait until you ignore the + sign and someone asks where your conclusion went.
    Jerry

  • Removing the "Now Playing" sign when the click wheel is moved...

    Is there anyway to disable the "Now Playing" sign from appearing when the click wheel is moved?
    ... I like to use my ipod (20 gig 4G) as a watch when i'm walking home at night. I have the clock display setting on so that the time will be displayed on the top of the screen. My problem, however, is that when I move the wheel to turn on the light, the displayed message changes from the time (which I want to see) to the phrase "Now Playing" (which I have no use for).

    If you select the clock from the "Extras" menu, you'll get a large digital clock on the screen which will stay there until you remove it. This might be more fitting for the purpose you describe?

  • ITunes 8: How to remove the little grey arrows next to artist, album etc.?

    Hello
    Since upgrading to iTunes 8, I can no longer find the setting to remove the arrows next to the song name, artist, album and genre. I don't like them in my library as it takes up space and creates clutter while I'm browsing though.
    If you don't know what I mean, then see this: http://oreilly.com/catalog/9780596100360/figs/d1e733-web.jpeg labelled as "Little gray arrows"
    Hope you can help.
    Thanks

    It's all over this place, but:
    Close iTunes, open Terminal. Put in this command:
    defaults write com.apple.iTunes show-store-arrow-links -bool FALSE

  • Remove the comment time stamp in a PDF document

    Does anyone know what's the best way to remove the comment time stamp from a document?
    thanks

    Do you mean that you want to remove the timestamp of a particular comment? If so, there are two timestamps associated with a comment, the creation date and the modified date. The modified date is what's shown in the comments list in Acrobat/Reader and can be altered by a script, but the creation date will still be present though unseen and unmodifiable directly with a script. It's possible to export the comments to a data file (FDF/XFDF), edit the file to remove/replace any timestamp info, and re-import the comments into a copy of the file that doesn't have comments. So the best approach really depends on what it is you're trying to accomplish.

  • Can I remove the Get Plus and NOS folders after I download the newest flash player?

    I see s
    ome folders noted as "NOS" in my app data and my common files, can I delete these once the new flash player is installed?

    Hi, you didn't say what OS/browser(s) you are running.
    Do you mean folders or in Add/Remove, etc?
    Need a little more information,
    thanks,
    eidnolb

Maybe you are looking for

  • Is there a way to Host Control

    OK I am on a mission to help a company figure out first, IF they can create an App that will allow an iDevice to controll their product via USB. They've already done this with Android devices but those of us who own Apple products exclusively are lef

  • How to erase all from a TX and use a new user name?

    I just got a used TX. It has all of the old info on it and of course the user name. I want to install my medical software etc and get rid of everything on the TX. I changed my user name on the desktop Palm software but it keeps reloading the informat

  • RV220W - disappointing firmware update strategy

    Due to the large amount of known issues which are still open with the actual firmware release v1.0.4.17 and due to the fact that there hasn't been any new release since 21-AUG-2012, I'm really disappointed about the firmware release stategy of the Ci

  • Item Conditions in ISA b2c catalog

    Hi, I need to get the item conditions for the porducts in the web catalog and show them in the catalog page in ISA b2c 5.0. Any pointers how to achieve that ! Regards, Kunal

  • This copy of ITunes will expire in X hours.

    I've received a message for the last few days stating, "This copy of Itunes will expire in X amount of hours". It's now down to 14 hours. I haven't figured out why this is occuring. Does this mean I need to purchase ITunes? What do I need to do? Any