Removing the master loop from the menu

I am trying to make a simple template with none of the design elements from the canned templates.
I cant figure out how to start a new clean one and I cant figure out how to eliminate all of the elements, mainly the
Bluemaster_loop_NTSCv2.mov (Video)
thanks.

The only way to get rid of it is by resetting your phone, you will need to backup first.
Try the first code but it's more likely to be the second one that gets rid of it.
Reset to factory defaults (*#7780#) : Restores settings but preserves user data (photos, 3rd party apps etc)
Reset (*#7370#) : This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten.

Similar Messages

  • HT5891 Is there a way to remove the menu bar from a secondary display while still using the "Displays have separate spaces" mode?

    Is there a way to remove the menu bar from a secondary display while still using the very useful "Displays have separate spaces" mode?
    The reason I ask is that most full-screen video playback in most applications, from iTunes to Flash/Silverlight plugins do not take up the full screen, instead leaving space for the menu bar (in the case of iTunes) or leaving the menu bar present on top of the video (for fullscreen Flash/Silverlight videos).
    This is annoying for several reasons ranging from the obvious distraction factor to the fact that 1080p video is not played back at native resolution on a 1080p display.
    If there is no way to disable this functionality while maintaining separate spaces, I would (humbly) suggest that a future update to Mavericks allow non-Lion-style* full-screen apps to take over the entire display.
    *Lion-style full-screen apps are those that animate into a full-screen mode when the opposing-arrows full-screen button in the upper-right-hand corner of the window is pressed.

    No. Turning that off reverts to the old display setup. You have one desktop spanned across all displays. The menu bar appears on the primary display only.

  • B-ACD remove the menu

    Hi
    I have CME and i configured B-ACD it's working fine
    what i want to configure is to dial the extension number while i hear the message i want to remove the menu? how to do this

    Router#
    *Mar 14 09:52:32.071: //129//TCL :/tcl_PutsObjCmd:
    proc init_perCallvars
    *Mar 14 09:52:32.071:
    *Mar 14 09:52:32.071: //129//TCL :/tcl_PutsObjCmd: TCL AA: ++ Playing Welcome Prompt and options menu ++
    Router#
    *Mar 14 09:52:38.299: //3//TCL :/tcl_PutsObjCmd: TCL B-ACD:  >>> B-ACD Service Running <<<
    Router#
    *Mar 14 09:52:41.191: //129//AFW_:/AFW_FSM_Drive: Tcl_Eval to drive FSM inside Tcl modulespace. code=1 code=ERROR
    *Mar 14 09:52:41.191: TCL script failure
            Result:
                             Play Failed
    *Mar 14 09:52:41.191:   TCL script failure errorInfo:
                            Play Failed
        while executing
    "media play leg_incoming moh:livemoh"
        ("default" arm line 15)
        invoked from within
    "switch -exact $optionSelected {
                                            act_RetryMenu
                                    {0} {
                                            act_GotDestNoOption
                                    default {
                                            set playMusicFlag 1
        (procedure "act_GotDest" line 31)
        invoked from within
    "act_GotDest"                                              
    *Mar 14 09:52:41.195: //3//TCL :/tcl_PutsObjCmd: TCL B-ACD: ++ Message received from IOS ++
    Router#

  • I lose the minimize, restore and close down buttons in the top right corner when removing the Menu Bar.

    I am using Firefox 28.0 on my Windows 7 64-bit PC. I would like to remove ONLY the menu bar and keep the orange Firefox tab. But when I uncheck the Menu Bar box, I not only lose the menu bar, I lose the three buttons on the very right of the screen as well - the minimize button, the maximize/restore down button, and the red 'X' close button. The space where these buttons ought to be is black. When I recheck the Menu Bar box, those three buttons on the right of the screen reappear!
    I would like to know how I am to remove the Menu Bar but keep the minimize button, the maximize/restore down button and the red 'X' close button.
    Eagerly waiting for your reply! Thanks much! ♥

    Hello again, cor-el,
    Thank you again for keeping up with me on this! I really appreciate your time!
    I tried your suggestions of using Safe Mode and a different Windows theme (2 different ones to be exact), but neither solved the problem. Each time I tried disabling the Menu Bar, the same 3 buttons disappeared and I got nothing but black space. It doesn't even fill the space with any background I may have. It's just black.
    Additionally, disabling all my personas did not help, either. :(
    I've been using Firefox for years now and I've never had this issue. It's always worked flawlessly for me.

  • How do I remove the menu button? The Customize option doesn't seem to work for that.

    How do I remove the menu button? [That IChing looking three line icon on the toolbar.]
    The toolbar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I'd like to swap it out for the NoScript icon.

    Hi, ''I can't recommend that you do it'', but If you really are determined, [http://www.tweakguides.com/Firefox_12.html this article] may help.

  • NOKIA 6300 remove the menu

    hi!
    I would like to know how to remove the menu and have only the "go to", "menu" and "contact" buttons on the bottom.
    I know it's possible...
    Thank you

    menu>>settings>>>display>>>active standby>>off
    NokIA 5310XM V5.81 - 06-02-08 - RM-303 - 8GB microSD

  • How can i remove the menu item from a menu

    how can i remove the JMenuItem from a JMenu at run time.
    thanks in advance

    This is in JMenu from the api
    void remove(JMenuItem item)
    Removes the specified menu item from this menu.
    You must download the api! it helps a lot!
    You can do that or if you need to access it again just set it visible(false);

  • How can i remove the menu bar from my second display

    I am using a Mac Mini for our auditorium projection computer and since upgrading to OS X Mavericks, the menu bar is now on all displays. I needto remove it from the projector display so it doesn't show on the projector screen. Is there an option for this?

    https://discussions.apple.com/message/23496295

  • Application Builder removing the menu and tool bar

    In Labview 8 we can use the application builder to disable the tool bar on the VI when during the build. Under Labview 8.2, the source file setting no longer affects the menu and tool bar of the top level VI. In my particuliar case, I want to remove the ability of a user to abort the VI from running after the application build, but I want the abort ability during the debugging phase.
    Under Labview 8.2, you have to alter the custom window for the VI. In the previous version, you can do it on the build module.

    Have you tried to set the properties of the Main VI being built?  It should default to these settings but you can still change them.  See attached picture from 8.20
    Matthew Fitzsimons
    Certified LabVIEW Architect
    LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison
    Attachments:
    AppBuilder8_20.JPG ‏51 KB

  • I have a VI with menu barattached i want to remove the menu bar.I am able to remove the menu bar in run continuously mode.but not in normal mode how do i do it in normal mode

    I have a VI with menu bar.I am able to remove menu bar in continuous mode by setting window appearence.But i want the menu bar to be removed at normal mode also.How do i do it

    You can trun off the menu while the VI is running by going into the VI properties (right click on the VI icon and select 'Properties). Then from the Catagory selestion box, select Window Appearance, click the Customize button, then uncheck the Show Menu Bar check box and hit OK twice. That shold do it.
    Note that this will only turn off the menu while the VI is running. The standard menu will always be showing when the VI is not running.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • How to remove the menu items when remove Add-On

    I have built an SAP B1 add-on. Now when I remove the add-on the exe is still running as a process and the menu items are not removed. How do I take care of them

    hi.
    I am using below code... for killing the exe at process
    but i am not understood menu items.
    what type of menu items..
    once close the b1 where is menu items..
    can u plz explain..
      Private Sub app_AppEvent(ByVal EventType As SAPbouiCOM.BoAppEventTypes) Handles objApplication.AppEvent
            Try
                Select Case EventType
                    Case SAPbouiCOM.BoAppEventTypes.aet_ShutDown
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                            Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        '// terminating the Add On
                        ' oApplication.SetMessage("SAP Business One is Shutting down..", SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
                        System.Windows.Forms.Application.Exit()
                    Case SAPbouiCOM.BoAppEventTypes.aet_CompanyChanged
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                            Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        'oApplication.SetMessage("Company has been changed.", SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                        System.Windows.Forms.Application.Exit()
                    Case SAPbouiCOM.BoAppEventTypes.aet_ServerTerminition
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                            Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        'oApplication.SetMessage("All Add-on are Shutting down..", SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                        System.Windows.Forms.Application.Exit()
                    Case SAPbouiCOM.BoAppEventTypes.aet_LanguageChanged
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                           Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        ' oApplication.SetMessage("System Language has been changed.", SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                        'Case SAPbouiCOM.BoAppEventTypes.aet_CompanyChanged, SAPbouiCOM.BoAppEventTypes.aet_LanguageChanged, SAPbouiCOM.BoAppEventTypes.aet_ServerTerminition, SAPbouiCOM.BoAppEventTypes.aet_ShutDown
                        '    System.Windows.Forms.Application.Exit()
                End Select
            Catch ex As Exception
                'oApplication.StatusBar.SetText(ex.Message)
            Finally
            End Try

  • How to remove US Keyboard option from Finder menu

    Hi,
    I'm using a new iMac (OS 10.7.4) and was wondereing if it possible to stop my machine from constantly changing the input menu from "Britsh" to "U.S.". This is the item with the small national flag icon in the Finder menu.
    Is there a way of removing one of these options permanently, in my case remove the U.S. option?
    Many thanks,
    TonyT

    Hi Tony,
    Go to System Pref > Language & Text > Input Sources where you can select British and deselect any US input source.

  • Remove Alt+F4 accelerator from Close menu item?

    In my Swing app, I would like to remove the Alt+F4 accelerator binding from the
    Windows menu Close menu item; I still want the menu and the Close menu item,
    just without the accelerator. This would be similar to how the command prompt
    window has its menu.
    Is this doable from within Java? Or is JNI the only way it can be done?
    Alternatively, is there a way to detect that Alt+F4 was used to invoke the close operation?
    Thanks,
    : jay

    I think you need JNI, cuz I think that is handled by the OS.

  • Something I have inadvertently done has removed the menu bar, the toolbars. The screen 'rolls' down when I move the cursor to the top of the screen otherwise it is in full screen all the time.

    I was working on an email last night and must have set something on which I do not want. When I state firefox, it comes up full screen but without any menu or toolbars. Even when I move the cursor to the top of the scrren to reveal what is there, there still is no menu or toolbars showing.

    If you run Firefox in full screen mode then press F11 or Fn + F11 to toggle (Mac: command+Shift+F).

  • How to remove "Save as PDF" from context menu

    The item "Save as PDF" leads to a commercial site called NITRO. I am trying to eliminate it from the context menu. I installed the add-on Menu Edit and changed the item Save as PDF from visible to hidden on my Windows 8.1 PC with Firefox 30. However, the item did not disappear from the context menu. Yet on my PC with Linux Mint 17 with Firefox 30 for Linux Mint the item is gone from the context menu. My PC s linked with Firefox Synch.
    How can I remove this?

    Such an entry in the context menu is likely added by a PDF related extension, so check your extensions.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for