Removing the msm from installation package

In my software i include the msm in the installation package. However one of my customers has the software sent over a VPN connection to him and with the latest version of Crystal the msm is now enormous. Is it possible to take the msm out of the installation package and have it installed seperately so that i don't have to send the msm across a slow VPN connection every time?

Hi;
You could have the customer install your program, and then download our MSI and install it themselves to get the Crystal runtime files. You do not say which version you are using, but the MSI files can be found here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0
Regards,
Jonathan

Similar Messages

How to remove the WiSM2 from the Catalyst 6500 series switch?

Hello, can you explain to me how to safely remove the WiSM2 from the Catalyst 6500 series switch?
According to the documentation "Catalyst 6500 Series Wireless Services Module 2 Installation and Verification Note":
To remove the WiSM2, perform these steps:
Step1     Shut down the module by one of these methods:
In privileged mode from the router prompt, enter the hw-mod module mod shutdown command. NoteIf you enter this command to shut down the module, you must enter the following commands in global configuration mode to restart (power down, and then power up) the module:
Router# no power enable module modRouter# power enable module mod
If the module does not respond to any commands, press the SHUTDOWN button located on the front panel of the module.
Step2     Verify that the WiSM2 shuts down. Do not remove the module from the switch until the POWER LEDis off.
But, in the case of Step1 (1st methods) I do not see a option "shutdown" in the command "hw-mod module 3"...
All I prompted to enter is:
c6500#hw-module module 3 ?
boot           Specify boot options for the module through Power Management Bus control register
reset          Reset specified component
simulate Simulate options for the module
Is it hidden options? IOS version of c6500 is 12.2(33)SXJ1
In the case of Step2 (2nd methods) there is not any button on the front panel of the module?
And yet, it is better to remove the module configuration manually or use the command module clear-config prior to removing the module?

Good catch.
Which one is true, will get back to you on this if i've something soon.
http://www.cisco.com/en/US/docs/wireless/module/wism2/installation/note/WiSM_2.html#wp34727
The above link is procedure to remove wism2. This procedure doesn’t look like wism2 is hot swapable.
http://www.cisco.com/en/US/docs/wireless/module/wism2/installation/note/WiSM_2.html#wp34621
All modules, including the supervisor engine (if you have redundant supervisor engines), support hot swapping. You can add, replace, or remove modules without interrupting the system power or causing other software or interfaces to shut down. For more information about hot-swapping modules, see the Catalyst 6500 Series Switch Module Installation Guide.

Does The Output From Cloud Packager Install MS Visual Redistributables?

Does The Output From Cloud Packager Install MS Visual C++ Redistributables? I have just noticed from the original media that it installs some MS Visual C++ Redistributables along with it and would like to know if it's still necessary to also install them separately after you install the MSI from Cloud Packager.
Thanks

You must to view the section: http://www.oracle.com/technology/software/tech/windows/odpnet/install10202.html... there you will find all the information that you need for the installation in windows vista. I could to install the ODAC and i have not any problem.

How can we remove the commas from the Formula value in SAP BW BEx query

Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.

Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards

How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account
<Serial Number Edited By Host>

If you enabled Find my iPhone then you should use that. If not, I'm afraid you're out of luck for finding it.
To manage your devices, go to Your Account in iTunes.

HT1918 I was using a prepaid Amex card with iTunes and now the money is done. How do I remove the card from my account?

I was using a prepaid American Express E-Gift card with my iTunes account and now the money is done. How do I remove the card from my account?

Changing Account Information
http://support.apple.com/kb/HT1918
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How can I remove the credits from the apple ID and import it to another apple ID?

How can I remove the credits from the apple ID and import it to another apple ID?
I want to remove the credit I have from my apple ID to another apple ID.
Is there a way?

No, sorry. You cannot transfer an iTunes credit to another Apple ID.
Cheers,
GB

In My iphone 5s,i have disabled automatic download from whatsapp app.So whichever images,video i feel is good i download them and then save them to my camera roll section.So i want to know how can i remove the images from cache of my phone.

In My iphone 5s,i have disabled automatic download from whatsapp app.So whichever images,video i feel is good i download them and then save them to my camera roll section.So i want to know how can i remove the images from cache of my phone which are downloaded and not saved,but they remain in cache.
Even in some apps i have data which i want to remove,but cant find a way to remove them and they are in my cache eating up my memory.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

How can I remove the applications from the Content Administrator

I had undeployed the applications from Content Administrator in two ways:
A:
1. Start the tool using the go.bat located in \usr\sap\<SID>\<Instance Name>\j2ee\admin folder
2. Log in with an Administrator user.
3. Under the Server node click Services-> Deploy.
4. In the runtime tab, on the right hand side screen click on the Applications checkbox. The list of all deployed applications appears.
5. Select the application and click on the Remove button.
B:
Undeploying using SDM remoteGUI.
after I finished that,the application still exist in the browse of Content Administrator Web Dynpro.
But it is'n invailable.When I click the application name,it throws exceptions:
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get list of defined JCO clients for deployable object 'local/Welcome'.
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get enable state for 'local/Welcome'.
No resource bundles found for development component ''local/Welcome''.
My question is , how can I remove it form the list.

Hi,
Have you restarted the server after removing the application from the Visual Admin?
Regards,
Satyajit.

HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal accou

Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?

You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

How can I remove the battery from my Iphone and Ipads?

How can I remove the battery from my iphone and ipad?

The iPhone and iPad do not have user serviceable batteries. Battery replacement is handled by Apple. Make an appointment at the Genius Bar if battery replacement is required.

I want to remove the VMware from my iMac intel will this remove the wind7 also cleanly ?

Hi, I know where to go uninstall the VMware (fusion), im just concerned that if i remove VMware it wont remove the windows7 cleanly, I never actually use it, someone thought it would be a good idea for me at the time, as I was new to Mac, well I had no issues with getting along with mac I was among some of the first to have computers in the schools, things are very similar so I never required the use of it.
Also I'm wanting to know what happens to my VMware, as I didn't install it myself just wondering if I can remove it from the trash and burn it to a cd ? for use at a later time, or would it be simpler and easy to just remove windows and leave the VMware Fusion installed, if so how much room is VMware using. I would really like to claim back that extra memory for use with my iMac.
I Thought It would be best to ask some advice before I make a silly mistake. So any info regarding this matter would be helpful thanks
OS X
Version 10.8
Build 12A269
Processor 2.66 GHz Intel Core 2 Duo
Memory 2 GB 800 MHz DDR2 SDRAM

Thank you for that, i am intending to upgrade my memory but not till end of month, So what your saying is to remove the windows from the VMware and if thats the case may I ask how i would do that. Sorry I just dont want to make a mistake and regret it later. Thanks for your help and advice Samberl awesome

Removing the msm from installation package

Similar Messages

Maybe you are looking for