Removing the Order from Campaign in /SAPAPO/CDPS_FDISHEU, but it is not reflecting in DS_ board.

Hello Experts,
we wan to create some custom logic to Remove some orders from campaign. For this we have created a function and removing the order from campaign in /SAPAPO/CDPS_FDISHEU->BEFORE method.
but the changes which i am doing they get save immediately in DB (Without press Save from DS board).
and also they are not getting reflected in DS Board also.
Please let me know, If you need any further information to help me out.
Thanks in Advance
Ashish Gupta

Hello Experts,
Any clue will help, please suggest.
Thanks,
Ashish Gupta

Similar Messages

HT5661 just purchased a iphone 4 and the person i bought it off removed the device from there apple id account but i still cant activate the phone what am i doing wrong

Just bought iPhone 4 has been removed from owners account but still can't activate the phone in my name or do anything with it

What kind of error message is preventing you from doing it?

HT4914 if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded t

if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded to iTunes match?

Welcome to the Apple Community.
iTunes match won't automatically remove content from your computer, if you want to do that you will need to do it manually yourself.

How to remove the Coupon from the Order.

Hi All,
I am working with order cancellation part ,so I am facing one issue i.e when order gets cancelled I have to remove the coupon from that order and that coupon should be available or used for future.
Please guide me how to do this.
Thanks in Advance
Edited by: user11500198 on Nov 26, 2012 12:22 AM

You can fetch the promotion from the coupon to be removed by quering the repository and then remove the promotion from the profile using the method
removePromotion(MutableRepositoryItem pProfile, RepositoryItem pPromotion, boolean pRemoveAll) in PromotionTools component.
Do remember to iterate if there are multiple promotions associated with the Coupon.
Also remember , this might cause some anamolies in the reports as you cannot reprice the order and only we can remove the promotion from the profile so that he can use it once more for a order.

I purchased gems from a game and didnt get them because my method was declined i want to remove the order so i dont pay for it and so i can update my other apps and i want to remove the method i will be thankfull if someone help me

i purchased gems from a game and didnt get them because my method was declined i want to remove the order so i dont pay for it and so i can update my other apps and i want to remove the method i will be thankfull if someone help me without updating the payment method i cant update my apps in my iphone i want to remove the method and remove the order i dont want it

Click here and ask the iTunes Store staff for assistance.
(125742)

Creation of production campaign and deletion of orders from campaign

Hi APO Gurus,
This is regarding campaign creation for a set or group of orders.
I have a group of orders in a z table, I want to create a campaign in PP/DS by using Heuristic : /sapapo/heur_pcm_create.
Can I do this without going to DS board, Simply by calling the above given function module in a z program?
Similarly , in another table if I have a set of orders , which are already part of a campaign.
Can I remove those orders from the Campaign by using heuristic : /SAPAPO/HEUR-PCM_Dissolve , without going to DS Board.
Waiting for your valuable suggestions.
Regards,
Ravi

Resolved .

Creating Service Order from Campaign

Hello Guru's
I m really stuck presently with my Task.
My scenario is, we have modified service order transaction (zsrv), and this service order has been modified by adding custom developed classification that we assign every time we create service order manually. I have to create same service order from campaign execution.
At the same time when we create campaign, this classification is assigned in campaign screen and stored in bespoke table. Then i have to create service order automatically from campaign when executed.
So can any one help me on this scenario. what BADi i have to use, what is the best approach for this. How i can pass the classification of campaign to service order.
please help me
thank you
shankar

Hello. What was the solution, please?
I have a similar scenario in which I need a mass creation of service requests from a target group.
Thanks a lot,
Luis.

How to remove the letters from the Application vie...

Hi,
Just got my new Lumia920 yestarday in AbuDhabi and very happy with it.
ok, it was showing the application and all setting one below eachother, after i download any software from the Market, a letters comes up and make my apps in like a group (like the letter A then all application starting with A,,, an so on)
when i remove the apps everything back to normal ! but when i install any thing again it happens !
how to remove this groupping ?

The problem is.
And I have to say it is very presumptuous of people to say "it makes things easier so I don’t see what the problem is!"
When you have a small screen like on the 520 there are more letters then Apps!
So I spend all the time scrolling past stupid letters.
Tapping the letter does not make things easier because it is now 3 taps and each scree change has got a deliberately slowed screen transition.
So it wastes my time.
Slow screen transitions and stupid multiple step operations was the single biggest reason I got rid of my Android device.
Windows8 was quick and simple with out all of the arty farty cr@p!
A quick flick gets me to where I want to go so I don’t need the letters.
If Nokia really wants to give me this option then maybe put an ABC symbol under the search magnifying glass incase say "I forget my alphabetic order!"
Really it was nice then all by it self with out giving me a warning or an option it went stupid!

How to Remove the Stock from 916

Hi All,
I have a few questions Related to WM.
1. Our End users are able to do the PGI Without Confirming the Transfer Order. Once they Do the PGI.After doing the Billing they are coming abck and saying that the stock shud not Present in 916.
Would you please let me know how can I clear the stock from storage type 916 and the bin created with Delivery number.
Is there any Possibility to Remove the stock from 916......?
Waiting for your Response .............
Sai Kumar

Hi
What our friend is saying is that in the config for item categories for deliveries if you set this flag it means that the PGI wont happen unless the TO creation and confirmation are both at status 'C'
Also ABAP techie
I see we asking for points again, what are you going to do with them when you get them?
I dont think that this is the point of this Forum!!
Regards
Frenchy

Block the order from MRP

Hi Guru
We currently have credit blocks on a sales order - they are either a block 25 or a CR block.
But neither block actually blocks the order from MRP - we can still buy parts and manufacture.
Can you provide us with a block that we can use on orders that will stop them from processing until it is removed.
Thanks
Suresh
Edited by: sureshsdconsult on Dec 8, 2011 7:01 AM

Hi Suresh,
Here i have one doubt is "25" means
U can use credit block in sales order, either warning msg or error msg.
If u choice warning msg system show how much credit exceed only.
If u choice error msg, order can't process.

Reopen the order from completed status

Hi All,
I am witnessing a wierd behaviour for which I need your help. Following is my status sequencing in SPRO.
NO.   STATUS.            LOWEST   HIGHEST   TRANSACTION
10      OPEN                10             50                INPR
20      DISPATCHED     20             50                INPR
30      ACCEPTED        30             60                INPR
40      CANCEL             40             50               CANC
50      MAG REVIEW    10             70                INPR
60      ETA                    40            70                INPR
70      ONSITE               70            80                INPR
80      COMPLETED      50             80               FINI
There are no authorization codes and keys attached to the statuses which means all users are allowed to see and change the statuses.
Now, when the order follows OPEN -> DISPATCHED -> MANAGER REVIEW, after manager review, I am able to see the option to set the status of DISPATCHED, ACCEPTED and CANCEL, which is correct as per the config.
But, when the order is OPEN -> ONSITE -> COMPLETED -> MANAGER REIVEW, after manager review, I am only able to see the option of ETA and ONSITE.
When I tried to debug and find out whats happening, I could see a check being performed which says that if the no. of current status(Mag review = 40) is greater than the status which we want to set (accepted = 30), then that status is not allowed.
However, this takes place only when the status of Manager review has been set from Completed. For others, this check is somehow bypassed.
One thing i observed is that when you set user status to Completed, the system status sets to Completed.
From there when you set Manager reivew, the system status changes to In Progress but it gives a warning saying do not change the status from Completed. I know this is somewhere related with the system statuses but nowhere I could find out the relation except for the one between the business transactions.
There is a lot of check happening behind the scene and its next to impossible to findout through debug as to why is this behaviour happening.
Can anyone of you please explain the reason of this strange behaviour and a work around for the same.
Expecting a reply...
Karan Merwana
Any helpful answer will surely be rewarded with points.

Hi Pepe,
Thank you for your answer. According to you, I should remove the INPR status for Manager Review. But if I remove that, then what will be the system status associated with that status. I need to associate some system status with that user status.
Also, I know that changing the status from completed to In progress should not be done technically but thats what the requirement is. We want the document to be reopened after completing it.
Thanks,
Karan

How can we remove the commas from the Formula value in SAP BW BEx query

Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.

Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards

How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

Removing the Order from Campaign in /SAPAPO/CDPS_FDISHEU, but it is not reflecting in DS_ board.

Similar Messages

Maybe you are looking for