Removing the shaking sound in live recordings

Im trying to remove the shaking sound produced during live recordings. I recorded a show on my iPhone via voice memos, and imported the file to garage band. Unfortunatly, im pretty new to it and im not quite sure how to clear up the audio. Im hoping to turn this into an album i can listen to later, and can share with friends.

Add music. Seriously. There's virtually nothing you can do. Maybe boosting an EQ range, but that's about it.

Similar Messages

  • How can I remove the background sound from the headphone jack for my MacBoo

    for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
    Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
    At first thought that the headphone jack (3.5 mm Headphone:
    Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
    When I added iPhonu3GS playing - the background sound were not, then everything is OK!
    How can I remove the background sound from the headphone jack for my MacBook Air 13?

    There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    http://support.apple.com/kb/HT2526?viewlocale=en_US 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

  • IOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    iOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
    You cannot play movies from ATV without itunes, which streams to the ATV.
    If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
    The next issues is speed of slowest connection.
    Your download to your home maybe great.. what is the upload speed from your office like??
    If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net..  and third to download it again.. net to home..  Sorry but it is better to play the movie directly from online itunes store.
    If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
    Overall this sounds like you need to think it out a bit more.

  • I cannot remove the free sound recorder toolbar from firefox.

    I was not smart and downloaded the free sound recorder from cnet. Now I cannot remove it. I have tried using the add/remove hardware method 3 times. I also installed malwarebytes to try and see if it caught anything and it did. I then removed the three things it found and several restarts later I am still having no luck. I am using microsoft xp and firefox 5.0. Thanks

    If you select Add-ons from the Tool menu, do you see this "WiseConvert" thing as a plugin or extension? If so, you can just disable it from there...
    Clinton

  • Removing the echo sound of a bad mic

    I shot an interview and forgot to switch the camera to external mic so the audio I recorded was with the built in camera mic (sony vx 2000). so, in short, it *****. I removed the hum using soundtrack pro. Is there any way to reduce the echo and generally improve, albeit a little, the audio? any help is much appreciated. i am working on a g5 2.7 with the latest version fcp 5.1.4.
    thanks
    andy
    [email protected]

    Add music. Seriously. There's virtually nothing you can do. Maybe boosting an EQ range, but that's about it.

  • Have they removed the unlock sound in 2.0.2 ?

    I am getting the lock sound, but not the unlock sound ?
    Anyone else see this or just me ?

    yep same for me.
    sometimes i have it sometimes i dont??
    only just noticed recently but was happening before 2.0.2 update but not happened before 2.0.1.
    I think a lot of these sort of issues could be to do with apps being installed??
    But surely apps shouldnt affect system software in anyway should they?
    Apple forum mods, u know the answer to that one?

  • How do you remove the pop sound in between looped samples?

    I have recently purchased the thor synthesiser for use with Garageband on the ipad. When I record a bassline and then loop it, There is an audible pop/click noise as sample repeats.This is really annoying as its an obvious impurity in the sound. I have the same problem looping recordings made using the ikaossilator.
    Does anyone know an easy way to get round this? Or any way at all?
    Many thanks
    Dan

    The pop at the end/beginning of a loop occurs when you don't have a "zero point" at the end of the sample, i.e. when it's not quiet or at least the audio wave is zero at this point so it can pick up seamlessly. Try to play your sample so that this is the case!

  • How do I remove the "whoosh" sound effect?

    I recently downloaded OS X Mountain Lion and I like the added features but I'm getting annoyed by what seems to be random "whoosh" noises. How can I disable this sound effect? Thanks a bunch! kmart69

    Try this System Preferences>Sounds>Sound Effects tab and deselect 'Play user interface sound effects'.
    If it's in Mail go to Mail>Preferences>General tab and you can control sounds there (independently of the above suggestion).
    I expect other applications may also have there own Sound Preferences that can be modified on an app to app basis.

  • How do I remove the static mouse from my recordings?

    Hello,
    I have a user who when she records she sees the moving mouse(which is expected) and also a static mouse(not expected) in the recording.
    Her work load is doubled because she has to take extra time to edit that static mouse out of the recording.
    This issue started with her old Mac and now on her new one. She is using Captivate 6.
    Old Mac
    OSX 10.8.5
    New Mac
    OSX 10.9.2
    Thank you for your help!

    To unpin a Tile
    Tap and hold the Tile you want to remove from Start.
    Tap Unpin .

  • I need The Creative Sound Blaster Live! c4780 Software Applicat

    I've Installed the SB LIVE! but I don't have the Creative Play Center, the software not the Drivers because Win XP installed all, but I don'0t have the Application. Any Help?I looked into the >Creative page but nothing comes out! and no link to downloaded appears?Thanx everybody!

    Have you try using the Li'veDrvUni driver?
    Jason

  • How do I remove the sound from a video project and replace with music...?

    Hi there to all...I would like to know how you remove the original sound from a movie (using iMovie) so you dont hear it through any music added...?

    Select the video clip and open the clip inspector to the video tab. You can set the volume slider to zero.
    You can apply this to a bunch of clips at once.
    Do the first one.
    Then Edit/Copy.
    Then Select the clips to apply it to by select while holding command key. (or EDIT/SELECT ALL to get all clips)
    Then EDIT/PASTE ADJUSTMENTS/AUDIO ADJUSTMENTS

  • [SOLVED][GNOME] What is the line for the startup sound?

    Hi!
    I removed the startup sound from GNOME.
    I don't even remember if it did work, but I press the remove button a bit too quickly and there is no confirmation box.
    Could you launch gnome-session-properties and tell me the command line for the GNOME startup sound please?
    Thanks!
    Last edited by Creak (2014-01-17 18:40:13)

    Spider.007 wrote:You're welcome! You should also mark this thread [SOLVED]
    Done!

  • Is the onboard sound better than SB live!

    I been thinking of using onboard sound right now Im using a old sound blaster live! its not the 5.1   What do you guys think ? See my sig for mobo type
    This is the sound chip on the mobo Realtek ALC650 it has 4 to 6 chan. and it also has a
    S-bracket that has analog to digital audio outputs by intergrating both SPDIF.
    Anyone here use there onboard sound? I would like to buy sometime till I can get a new soundcard I want to free up a pci slot.

    Uninstall the SB Live, and all related components thru device manager, then go to control panel>add or remove programs. Remove any Creative programs related to the SB Live. Shutdown and remove the SB from the system. Upon bootup, enter BIOS, and in the "Integrated Periphrials" section, set the AC97 to enabled, and reboot.
    During bootup, it should find the AC97, and ask for the drivers, cancel the prompt. Then open the folder containing the drivers, and install from there.
    One thing to check while you have the case opened to remove the SB, look for the front audio header, usually "JAUD1", there needs to be 2 jumpers installed in order to direct sound to the rear audio ports. These are normally installed before the board ships, but can be left off. Never hurts to look. I believe the jumpers go on 5-6 and 9-10. Check your manual to verify. the front audio header is located at the bottom of the board, near the front. If you have no manual, click here to download one.

  • Live recordings and the click between tracks

    Dear users,
    I'm a very fresh user and i wanted to know if there is a way around the stops between tracks on live recordings.
    I realy don't like the sound of that everytime a new number comes along.
    I have done it by way of ripping and using itunes....they all have the same result between the tracks.
    Somebody told me that i should learn to live with it?
    Every tip is welcome!
    Hans.

    I know that i'm not the worlds best pc user...but i have done everything what i could think of.
    Put a cd in > open itunes > and wait for the things to come.
    Then i have the option to import the cd witch i do.
    Before and during this i can not use this button...it stay's grey....also when i import a file from my folders its the same story...this button wont work.
    I updated the itunes....and still the same.
    Buttons i can not use under the " Advanced " tab:
    Convert
    Get cd track names
    Submit cd track names
    Join cd tracks
    Convert ID3 tags
    I have worked by the notes you've given me....and still no result.
    I'm sory that i can not see/solve this problem the way that somebody else will see and solve it.
    At my side the button stay's grey....
    Thank you for your time and effort to help me out here
    Hans.

  • How do I remove the background from a movie / sound problems

    Apologies, not really sure what I’m doing…
    How do I remove the background from a movie I made?
    I imported a QT movie at 368/272 pixels, but for whatever
    reason the HTML jumps up to 550/400.
    The movie is still 368/272 but there is a background border
    making it 550/400. Tried all sorts of settings in Publish but
    can’t get rid of it. Can I keep the movie (and controller)
    and not the background?
    I can get round it by changing the background colour, but
    surely there must be another way.
    Also: My QT file was fine but the .flv has a stuttering
    sound, any idea what could cause that?
    Thanks, and Thanks!

    If you want to remove a background and add a new one Photoshop Element for Mac makes it rather easy to do:
    OT

Maybe you are looking for