Removing white border around applet in browser?

Greetings All,
My applets are surrounded by a white border in Netscape and IE. Can I get rid of it so that the applet goes from edge to edge in the browser control? (Looks like default 5 pixel Hgap is in force, is this the case, and if so can it be overridden without access to the source code?)
TIA,
Dave.

Hi, Even when you assign 100% to width and height you will notice one black border around applet in case of IE5.0 When I go in to full srceen mode in IE 5.0 It should not show me scrollbars.
But because of this border scrollbar remains

Similar Messages

Thin white border around image in browser

In Firefox and Safari a thin white border appears around a
black image. My background is black so.....is it a matter of the
blacks being slightly different? I'd like the image to appear
seamless on the page. How can I fix this?
http://wall-eye.com/about.html
(it's the Walleye eye navigation image)
keith

Hi, Even when you assign 100% to width and height you will notice one black border around applet in case of IE5.0 When I go in to full srceen mode in IE 5.0 It should not show me scrollbars.
But because of this border scrollbar remains

Remove white border around TOC

Hello all, I have set a black background to the HTML page, playback controls and TOC. Yet Captivate draws a white border line 1px wide around the TOC. Is there any way to remove this?

Hi Robert,
I can understand how it feels when something is translated entirely different than what the feature is supposed to do.
This says it....
"For example the new function that moves the recording area following the mouse movement has been translated into a term that describes the balancing of stereo sound."
You can raise this issue, so that the Localisation team can take this up.
Click to report this issue
-Ashwin

Removing white border when publishing in web

Hi
There seems to be a default white border around the web
published version of my CAL metarial. See below
http://www.lshtm.ac.uk/dl/programme/sample/whitegap.gif
How do I remove it so the CAL material is flush against the
corner edge of the web browser
Thanks in advance
Jon

Set the margin and padding on the body tag of the html page
to 0. You can
do this directly in the tag or with CSS.
HTH;
Amy
"webacity" <[email protected]> wrote in
message
news:et3gfp$hgv$[email protected]..
> Hi
>
> There seems to be a default white border around the web
published version
> of
> my CAL metarial. See below
>
>
http://www.lshtm.ac.uk/dl/programme/sample/whitegap.gif
>
> How do I remove it so the CAL material is flush against
the corner edge of
> the
> web browser
>
> Thanks in advance
>
> Jon
>

Getting rid of white border around photos when using iphoto to iweb

Hi there,
Am creating web pages in iweb and importing photos from iphoto. Can anyone tell me how to get rid of the white border around my photos (image frame)? Hoping to enhance some of the templates with my own images. I also have photoshop elements and have been having the same problem there. Sure appreciate. Kim Strouble

Welcome to the Apple Discussions. The link to the site is broken. There is a fix for some of the strange goings on since the MobileMe conversion. See Wyodor's post in this thread: http://discussions.apple.com/thread.jspa?threadID=1605665&tstart=0. After applying the fix to iWeb I found I might have to republish a second time, occasionally a third and make sure I cleared my browser's cache.
If you're using Firefox 3 that's a different solution that can be found here: http://discussions.apple.com/message.jspa?messageID=7486799#7486799
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Unwanted white border around a div

I placed a div that I am using for a background. Before I add an image I am testing it out by giving it a blue background. I have the width and height set to 100% and left to 0px and top to 0px. When I test it in a browser (IE 8) or view it in Design view it has a white border around it. There is no border setting or margin setting. Is there some preference setting in Dreamweaver that makes this aproximately 10px border? If so how do I get rid of it?

Thank you both - that helped to clear up some of the issues but others remain. I'm assuming I can keep the dialogue going but will start a new thread if that is required.
I uploaded the page and css files to my server. The page file is http://www.wlvs.com/untitled-1.html and the css file is http://www.wlvs.com/test.css I ame using these file to try out styles. The background div (backgnd) will ultimately be an image but for now I'm just using a color. The "wraper" has an image that I gave a padding to at the top and bottom and for some reason it is showing a dark blue color. - I thought it would allow the background color to show through - shouldn't it??
The other issue is centering the logo in the "header". I suppose I could use <center> but I am trying to figure out what is the css code for doing it. Nothing seems to work. I was able to center the "wraper" image but could not do the logo.
Any help would be much appreciated...

White Border Around Flash in Dreamweaver

When I insert my Flash file (.swf) into my Dreamweaver page,
Dreamweaver inserts a thin white border around the flash video. I
have tried several potential solutions I have seen but none of them
seem to solve the problem. Looking for suggestions!

Which browser ?
"CreateGood" <[email protected]> wrote in
message
news:fvn8uh$mj2$[email protected]..
> When I insert my Flash file (.swf) into my Dreamweaver
page, Dreamweaver
> inserts a thin white border around the flash video. I
have tried several
> potential solutions I have seen but none of them seem to
solve the
> problem.
> Looking for suggestions!
>

How can I create a white border around figures that are in an image? (CS 6; examples+image included)

Hi,
I have CS6 and am wondering how to create a white ("comic style"?) border around figures in an image, as in the examples below. I don't wish to include the black shadow of the border, just the white part.
Examples:
Here's the image I'd like to alter, making a white border around the outline of all five figures:
I researched for quite a while but could find no instructions. It would be very much appreciated if someone knows and would be kind enough to share the technique! Thank you.

If you make the image a layer (opposed to Background)...
You could Select the blue with the Magic Wand as Semaphoric says, then fill with white. Then choose Select - Modify Selection - Contract, and mask or delete the remaining pixels. The Contract operation will give you a nice border the size you choose.
For extra credit, you could use Refine Edge to make the selection more accurate.
Click to see the image against a dark background.
-Noel

Can't get rid of white border around image

http://www.gunnar.ca/laminatepage2.htm
I created a rounded corner in photoshop for my table. I
created a cell in the bottom left corner of the table and placed
the gif. There is a thin whit border around the outer edge of the
gif, so it doesn't look genuinely rounded. Can anyone tell me how
to get rid of that so it looks like the table is actually rounded?
Thank you!

Because the table containing the GIF has a border. In your
styleA.css
stylesheet, the rule:
.border {
border: 1px solid #E5E5E5;
adds a border to the table. Delete the rule. Of course - that
may affect
other things that use the .border class. Or - delete the
class from the
table tag.
Several problems with the page:
styles.css cannot be found
sideNavStyles.css cannot be found
34 vaildation errors:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gunnar.ca%2Flaminatepage2.htm
Alec
Adobe Community Expert

White border around images in Easy Rotator

I would like for there to be a small white border around my images when i put them into easy rotator. I really just want there to be about a 5 px space around them that is really just the background. I cant seem to find the right place in the code to make the div that holds the background color... which is white...to make it have like a 5 px padding..
or even make a 5 px margin around all images.
I even tried to place the border around my images when placing them in the rotator but the top still pushed all the way up and there was only the white space on the left right and obviously the bottom where the dots are that shows which number slide I am on.
Where in the code will I find this so I can manipulate it... thanks again for always helping
avery

Without a link, it's all guesswork.
Use Chrome or Firefox to preview your page. Right Click and select Inspect Elements. This should give you some idea of which CSS selectors are used by Easy Rotator.
Nancy O.

White Border Around Template Images

I recently created a "page layout" document from a template. This is my first attempt to use a template and it was all going well. Until I hit "print." When I print the document, the images that were already part of the template are printing with a white border around them. It looks fine in Pages and when I go to Print Preview, but it comes off the printer looking funny. What's the deal?

Thanks for the clarification. I had a hard time selecting that white border around the photos. I couldn't even figure out what it was for awhile. I think the printing problem is related to that white border which is an image, photoBG_triple.png, that is behind the photos & their masks & on top of the lined paper image, notepaper.png. I think all that layering looks nice on screen or PDF, but could be a printing nightmare. How does it look funny? And what kind of printer are you using?

Problem with white border around images

Hey guys,
I'm new to the creative suite and have just finished running through all of the video tutorials, etc. I'm having a small problem which can be seen in the sample site I'm fooling around with here:
http://www.andrewedunn.com/gsd/
I'd like to get rid of the small white border around the "GS" logo. It is an illustrator document.
Basically I put the letters in place, converted them to paths (so I can resize it) and dropped it in my GoLive document as a smart object.
A google such suggested rasterizing, but I couldn't get it to work after fooling with it a little bit.
Further, if I wanted to add a drop shadow to it, how can I do it so that it is transparent on top of the background images in golive? The one time I tried it, the drop shadow was placed on top of a white background.
Any suggestions would be appreciated!

Are your background images always going to be displayed left-aligned on a black background and always the same size, so that the left half of the logo will always be over the photo and the right half will always be over the black? Or will the size or placement of the photos vary?
Are all of the photographs in approximately the same moderate tonal range, or will some be bright and some dark?
If the background will be consistently as you show it, you should be able to anti-alias your logo against a medium gray on the left and black on the right for acceptable results. If the background is more varied, you are not going to get good results with either GIF or JPG format.
See this related thread:
http://www.adobeforums.com/cgi-bin/webx/.3bc38b6e/3
> Further, if I wanted to add a drop shadow to it, how can I do it so that it is transparent on top of the background images in golive?
Only by exporting as a transparent PNG, but then older browers won't display it properly.
If you are really needing to have a logo that casts transparent drop shadows on top of a wide variety of images, you might consider going the Flash route, even though you aren't planning animation. Flash has very good transparency handling, and there are Flash player plugins that are compatible with browsers that won't display PNG images.

In pages/Pixelmator how do you put a white border around a piece of font, to make it stand out more. Please Help

The Benchwarmers logo, I would like to have a white border around the font to make it stand out. Help please

You would be better served to take a closer look at BeLight's free Art Text 2 Lite, or on YouTube, search for "Pixelmator text effects," or review the several Pixelmator tutorials on their site. Pages does not support the layered text effects necessary to create the Benchwarmers logo, but certainly can incorporate this image once completed through external means. Is the following image the one you have in mind:

How can I get an even white border around 4x6 photo I am printing?

I am doing some photo restoration. I have a very very high res image that I want to print out at 4x6 and 8.5x11. I need it to have an even white border around it.
How can I do this in Photoshop CS5.5? I try to import it into inDesign it the dimensions don't mesh with the border. Any suggestions?
Thanks.

If you want to add the border to the image iteself you could use Image > Canvas Size to increase it accordingly.

[solved] White border around urxvt (Openbox / Dyne)

Hi, dear community.
I'm using Openbox and urxvt as console terminal. Everything is fine but white border around urxvt window is really annoying.
Screenshot:
Notice, there are no white border around another application window.
.Xdefaults:
! c o l o r - s e t t i n g s
*background: #222222
*foreground: #EEEEEE
! Default
! 0: black
*color0: #222222
*color8: #222222
! 1: red
*color1: #9f6767
*color9: #9f6767
! 2: green
*color2: #92ac68
*color10: #92ac68
! 3: yellow
*color3: #d0d293
*color11: #d0d293
! 4: blue
*color4: #9aacc3
*color12: #9aacc3
! 5: magenta
*color5: #bb77a4
*color13: #bb77a4
! 6: cyan
*color6: #77bbb5
*color14: #77bbb5
! 7: white
*color7: #777777
*color15: #777777
! u r x v t
urxvt*geometry: 130x45
!URxvt*font: xft:terminus:size=8
urxvt*saveLines:32767
urxvt*internalBorder: 0
urxvt*externalBorder: 0
urxvt*scrollBar: false
urxvt*scrollColor: #EEEEEE
urxvt*scrollBar_right: true
urxvt*scrollColor: #000000
urxvt*externalBorder: 0
urxvt*internalBorder: 0
urxvt*borderless: 1
urxvt*perl-lib: /usr/lib/urxvt/perl
urxvt.perl-ext-common: default,tabbed,matcher
urxvt*urlLauncher: firefox
urxvt*matcher.button: 1
As you can see - no white color usage, and options that probably turning border off are on.
Can someone help with it, or suggest where to search for solution?
Last edited by kvictor (2009-10-22 07:39:15)

skottish, thank you so much! At least I found where to search thing to fix.
There was one problem with you solution - if you change window.client.padding lines to the zero, you will lost ability to resize terminal window. The best fix is to change this lines:
window.active.client.color: #XXXXXX
window.active.client.color: #XXXXXX
and set #000000 or what would you like.
Anyway, thanks again, you gave me a key to solution!

Removing white border around applet in browser?

Similar Messages

Maybe you are looking for