REMSH unix command issues when adding rule for port 514

Has anyone experienced any issues with Unix systems when adding rules to WAAS for port 514? This is the port RCOPY uses and is not handled by WAAS by default. We created a rule for port 514 but when we implement any type of optimization (even TFO Only) we start having problems with REMSH. This is used in one of our production scripts that normally take 10 minutes to run. When we apply the rule for port 514 the time goes as high as 45 minutes.
We wrote a test script that uses just the REMSH command and with out the 514 rule works fine but with the 514 rule goes down the tubes.
Just to add a little more information, I do not see an entry under Monitor/ Connection Statistics with the servers in question when the test script is running so am not sure where to go from here. I know there is a way to do a TCP capture from the WAAS so figure that will be the next step to see what is causing the issues.
Thoughts?? Ideas?? Suggestions??

Well TAC came back with a answer. They found other people with the same issue.
"It was found that the applications always used the same source and destination TCP ports. WAAS has the first connection in a "WAIT-CLOSE" state so when the next packet comes in with the same ports it is dropped." , "A defect was opened for this issue, but has not been fixed yet."
He wanted us to do a packet capture but after finding these other tickets decided it would be a waste of time and only tell us we are having a similar issue as others.
Still waiting on a suggested work around or a patch, 4.15 is suppose to come out soon but haven't heard if it will fix the problem.
With the new information I don't think even putting 514 in pass-through will fix the issue.
I will let you know if I hear anything else.

Similar Messages

'Activation error..' message when uploading rules for multiple territories

Hi All,
When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
The create_rule() and save_rule() methods of CL_CRM_FDT class and FM CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
Kindly suggest some ways to unlock or any other alternatives.
Thanks & Regards
Jagathshree

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

GRC 10.0 SP14 - Poblems when generating rules for logical systems

Hello Experts!
We recently updated a DEV system to SP14 and we're having issues regarding the rule set generation. I'd like to know if you have faced a similar problem after installing SP14. The details are described below:
Create a test function ZTEST_F1
The action PFCG is associated to a Physical System (Test Connector SP14) and to a Logical System (Sistema Logico Retail)
The logical system contains D05 among other connectors:
And it’s defined as a logical group:
The connector “test connector Sp14” points to the same system as D05.
Now I create another function, let’s say ZTEST_F2
Now let’s define a SoD Risk ZTSTSP14
Generate rules and after that we check GRACSYSRULE table for such risk and we get:
Let’s add more transactions:
Generate rules:
Now in the table we get:
The logical system has been added to the GRACSYSRULE table for the new combination and also the physical system TST_D05, but there's no combinations for the system D05 for example.
Now if we run SoD analysis:
We have four combinations for the physical system TST_D05 but only two for D05 that belongs to the logical system:
Do you have any clue? have you faced a similar problem?
Thanks in advance.
Cheers,
Diego.

Hello Collen!
First of all I want to thank you because after aplying the note the rules generated fine and now the Risk Analysis is OK for the example described above:
I've also tested with a huge number of risks and made a comparison between the results of the Physical conector and the Connector that belongs to a logical group and I got the same results as action level as well as Permission Level as expected.
Regarding the note itself, we usually check for notes and we have implemented many notes in advance related to rule generation issues.
The point is that, as my point of view is just not acceptable to get a new SP with this kind of issue. Rule generation is a core functionality and SAP must test such functionalities before releasing a SP and these checks cannot rely on the customer. For me, rule generation issues in GRC are just unnaceptable. I can accept issues with other modules or new functionalities, but with role generation they must guarantee that it works properly and perform the requiered tests before releasing an SP.
Well... bottom line the issue has been resolved and I really appreciate the help you provided!!!!
Many Thanks!!!
Diego.

Flash - Issue when adding scenes/keyframes

Hi, very new to flash,
Basically I have an existing site which is built in Flash CS6, each page is built on a single layer with one frame and is embeded into an HTML document.
What I am trying to do is add a preloader to this sites pages, I have no issues in adding the preloader and code to make it work.
What I am having issues with is when I add either a new scene or keyframe to put the preloader on, the images I have on the main scene/keyframe become very distorted after publishing.
I have played with the publishing output settings i.e JPG vs PNG, and done a thorough search online but cant find anything.
Any help would be much appreciated..
Thanks

Any help would be appreciated ..

Group Tree issue when refreshing- Crystal for Visual Studio 2010 WPF Viewer

Hello,
We've run into an issue when refreshing reports with the WPF viewer for Visual Studio 2010. After the report is refreshed, the Group Tree is blank and it should have values. For example, you run a report and see values in the Group Tree. If you refresh the report with the same parameter values the Group Tree is blank.
Has anyone run into this yet?
Thanks,
Tyler

That is correct.
I just did a quick test and was not able to reproduce the issue.
Details of test:
1) Create a new app;
File | New | Project
Visual Basic | reporting -> Crystal Reports WPF Application
2) Add the "Open File" button to the viewer (ShowOpenFileButton off of the WPF viewer properties)
3) Run app
4) Browse to a report that has a number of groups >250
5) Refresh report using the Refresh button on the viewer
I'll work on this a bit later today, see if I can repro it another way. Meanwhile, can you provide mode details (code) on how you repro the issue?
- Ludek

OIM 11g: Issue while evaluating rule for Role Membership

Hello All,
I have configured few General Rules using 2 of our User Defined Fields, these general rules are used to determine role membership.
What we observed that once "Identity Status" attribute is set to "Disabled" for OIM User Profile then OIM stops evaluating these configured General Rules for Role Membership.
Env Details:
Product Version: Oracle Identity Manager 11.1.1.5.0
App Server: WebLogic Server Version: 10.3.5.0
OS: Red Hat Enterprise Linux Server release 5.5
Database: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64 bit
Please let me know if any of you have encounter this issue and if there is any workaround available for it.
Thanks,
Shyam

Re: OIM11g: Resource not revoked if the Identity Status is DISABLED
XL.EvaluateMembershipForInactiveUser
Workaround:
You can make you of Event Handler and assign that group with APIs.

802.1X Authentication issues when moving between switch ports

Hi Guys,
We are having some issues at our office where when users move from one switch to another, the 802.1X authentication does not want to take place. The PC just gets an APIPA address. Now I have read about features that MAC Move and MAC replace but they seem to be used when moving from one port a switch to another port on that same switch. Will MAC move help for issues between switches? And should I focus my attention on the switch's configuration or have a look at the NPS server that might be blocking that authentication as the user is already authenticated?
My configuration we have on the switch ports look as follows:
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
dot1x pae authenticator
Your help is greatly appreciated.
Grant

Hi Neno,
Thanks for the reply. We are using NPS on a Server 2008 R2 virtual machine. The switches are stacked 2960S-48FPS-L running 15.0(2)SE. I will quickly do the debugs and get back to you.
Here is the config:
aaa group server radius customer-nps
server name radius1
server name radius2
aaa authentication dot1x default group radius
dot1x system-auth-control
radius server radius1
address ipv4 172.28.130.52 auth-port 1645 acct-port 1646
key 7 05392415365959251C283630083D2F0B3B2E22253A
radius server radius2
address ipv4 172.28.131.52 auth-port 1645 acct-port 1646
key 7 107C2B031202052709290B092719181432190D000C
interface GigabitEthernet1/0/1
switchport access vlan 300
switchport mode access
switchport voice vlan 2
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication periodic
authentication timer reauthenticate 28800
authentication timer inactivity 1800
mab
no snmp trap link-status
mls qos trust cos
dot1x pae authenticator
auto qos trust cos
storm-control broadcast level 1.00
storm-control multicast level 1.00
spanning-tree portfast
spanning-tree bpdufilter enable

Using a content rule for port translation.

If I set up a content rule to grab traffic on a VIP on port 81, can I then send it to a server that is configured for port 80 ?
cheers,
Mike

If I receive a udp packet with the sourse port 123. Can CSS forward this packet to the Server, but replace sourse port to something greater than 1023 ???
As I know CSS doesn't NAT for udp ports less than 1023.

Issues when adding the Interaction centre option to Nav Bar for WebUI.

I just wanted to clarify something if I may.
Am I right in thinking that the Interaction centre can be viewed for Service, Sales and Marketing. There are standard SAP business roles for all these, being the SERVICEPRO, SALESPRO and MARKETINGPRO.
I have a new business role to be set up which is a sort of hybrid of the SALESPRO and MARKETINGPRO roles. However, what I can't determine is what displays the Interaction centre from within the Nav Bar for any of these particulat SAP roles.
In the SAP GUI we could just run transaction CIC0 and depending on the PCFG settings it would either show the Sales IC or the Marketing IC. I need to just show the marketing IC for my new Z business role, but getting the details into CRMC_UI_PROFILE and CRMC_UI_NBLINKS is proving very difficult, for me.
Has anyone done anything like this before?.
Jason

Hi Jason,
In spro please go to
Customer Relationship Management->UI Framework->Technical Role Definition->Define Navigation Bar Profile
1.You can create your own NavBar Profile (by making a copy of any of the existing Nav Bar Profiles) say Z_ICPRO.
2. Select your profile.
3. Then goto the node Define Profile->Assign Work Centres
New Entries
4. Here you can add IC_BPIDENT (This work centre corresponds to Account Identification), at any position you want.
5. Assign the above nav bar profile to any of the existing Business Role (or create your won Business Roles) via customizing
Customer Relationship Management->UI Framework->Business Roles-Define Business Role
5.Now when you login to web ui with the above Business Role, you should be able to see Account Identification on the WorkCentre tab!!
Hope this helps.
Regards
Nisha

Need help on volume issue when adding a song from itunes

I am creating a podcast. I am hoping to create a guided meditation CD with speaking and background music. I used the male voice to record the speaking vocals and adjusted some small areas slightly for volume if I was too close to the microphone, etc. It is a twelve minute recording. I then added a music selection (for background) from my itunes by clicking on media browser, audio, and dragging the song into the track area. It automatically put it in Jingles. When I listened to the new recording, speaking vocals and music together, the background music had distinct variations in its sound, going louder and softer on its own, sporadically, jumping in random places. It doesn't do that if I listen to the music selection directly from itunes. So the volume increasing and decreasing only happens when it is brought into garageband. When I hit play on the final piece, the vocals sound exactly as they should but the music jumps around in volume randomly.
I have tried putting the music selection in as a new basic track instead of Jingles.
I have also tried starting with a new podcast, putting the music in first and then adding the completed vocals (I tried it in both male voice and female voice).
I have tried putting the music selection into a project by itself with no vocals and it sounds just fine... the volume problem happens when I add the speaking vocals to the project.
I have also tried dragging the music selection from a file on my computer instead of from itunes. None of these things have helped.
Somehow the vocals and the music together in garageband make the music sound wonky. Please help. Any advice would be helpful.
Thank you
Beau

isabeauesby wrote:
the background music had distinct variations in its sound, going louder and softer on its own,
make sure the Ducking menuItem is turned off

Slicing image issue when using "save for web"

Keep in mind I am a newbi to photoshop and these forums. I am currently having an issue with using the slice tool when trying to save the image in html format. I have my image completed and when I use the "save for web" feature, it comes up just fine. Then I click the slice tool on the tool bar on the left, and try to drag over the area that I want to slice and it wont work. Currently, every time I try to use the save for when feature, the new box pops up and shows my image with a 1 and a symbol on the top left of the image like the whole image is already made into a slice. The only thing I can do is left click and hold to drag the transparent box to where I want to slice the image, and when I let go, the image does not slice. Any help would be great!

Completely wrong workflow. See the online help on the slice tool.
Mylenium

Smart Plug Connection Issues when adding to your system.

I just got my new smart plugs in the mail, and there was an issue setting them up. The pairing was not happening. We tried for a good 20 mins following the instruction for pairing the devices. I got them to finally pair when instead of doing a 2-3 second button press i switched to a double tap quick press. The devices were dicovered right away. Looks like the instruction for the devices dont seem to match up with what the support is told to do to pair those smart plugs. I wanted to share so you guys could look into this as the rep that helped me today said these are always tricky for them to get connected. Recap Doing 2-3 second delayed button presses did not work. Doing 2 quick presses of the button made the smart plug start clicking. I could hear it turning on and off.

I don't want to create another user in the business system for this purpose, does anybody
know what other configurations should I do for retrieve the message details automatically without
any login information like retrieving the message list.
Check if you can apply Single-Sign-On....
Refer this link from help:
http://help.sap.com/saphelp_nwpi71/helpdata/en/32/1c1041a0f6f16fe10000000a1550b0/frameset.htm
Section from the link:
Since the Runtime Workbench communicates with AS ABAP, the Java logon ticket key pair must
be modified, and the corresponding certificate must be exported from AS Java and imported to AS ABAP.
Hope it helps...
regards,
Abhishek.

Issue when update ios for 7206 router

hi all ,
the ios on router was 12.4
i put the ios
c7200p-adventerprisek9-mz.152-4.M5.bin
in disk2 , of router
and added
boot system flash disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin
after that ,
i restarted the router
i have the followign logs :
7200Gateway#reload
Proceed with reload? [confirm]
*Jan 11 15:24:11.469: %SYS-5-RELOAD: Reload requested by m0ulngateway on console. Reload Reason: Reload Command.
*Jan 11 15:24:11.681: %BGP-5-ADJCHANGE: neighbor 213.244.66.77 Down Peer closed the session
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ################################################################################################################################# [OK]
%SYS-6-CLOCKUPDATE: System clock has been updated from 15:26:31 UTC Sat Jan 11 2014 to 17:26:31 Israel Sat Jan 11 2014, configured from console by console.
% No interface specified for interface_command
X121 address and queued type can not be configured on the same rotary group 1
%SYS-3-IMAGE_TOO_BIG: 'disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin' is too large for available memory (46143512 bytes).
%SYS-6-READ_BOOTFILE_FAIL: disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin File read failed -- Not enough space.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
boot of "cisco2-C7200" using boot helper "bootflash:c7200p-kboot-mz.124-4.XD5.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "cisco2-C7200"
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
*** No sreloc section
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Installed image archive
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Warning: The CLI will be deprecated soon
'enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Please move to 'enable secret <password>' CLI
max-reserved-bandwidth 95
   ^
% Invalid input detected at '^' marker.
Press RETURN to get started!
============================
focusing on the red lines above .
is there ANY THING WRONG ?????
AFTER THat i have sh ver :
7200Gateway#sh version
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
7200Gateway uptime is 10 minutes
System returned to ROM by reload at 17:24:07 Israel Sat Jan 11 2014
System image file is "disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
=====================
focus on bold line ,
did the router get the new iso without problems ????
wish to clarify
regards

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

Having issues when adding transitions to FCP7

Hey, I'm editing a short film and I've been having some issues whenever i add in a transition (cross/dissolve) to any of the clips and go to play them back it has a glitch, not very familiar with FCP a complete newbie at this..Tried exporting it out to qt and the glitches got even worse...it totally freezes up and throws off the audio track completely or it will stay frozen but the audio keeps playing. I'm fairly new to this program and so i may not have the correct terminology but could really use some help.. This is my final project for graduation and right now i'm pretty stuck any help would be greatly appreciated. I included a few screen shots to explain what actually happens as the video plays out. Oh before I export it when i'm working on it on FCP it doesnt look that bad, it just kinda jumps a bit when the scene with the transition plays.

Hi
thanks for your response, sorry I hadn't responded but it worked and it's now working perfectly again. TY

Audio issues when adding movies to Premiere Elements 11

When I try to add movies to PE11 the audio gets all screwed up. I am very new to video editing and I haven't had this issue with other movies, only those froma specific camera. The only thing I can see is that the audio from the camera that works is mono, and the audio from the camera that doesn't work is stereo. Any suggestions on how I can fix this issue?

b.raines
In addition to Hunt's questions, I would ask:
1. What are the brand, model, and settings for your camera? What are the properties of the video that it generates?
2. Are you accepting the project preset automatically being given you after you drag your video to the Timeline (Expert view) or are you setting the project preset in the New Project dialog yourself. The project preset should match the properties of your source media. Sometimes the program's choice is not appropriate. Please check under Edit Menu/Project Settings to see what the program is setting and compare that with what you know are the properties of the source media.
For Properties Readout, please consider the free MediaInfo
http://mediainfo.sourceforge.net/en
3. Is the audio messing up the only problem that you are having? If so, where is it manifesting itself
a. when you playback the rendered Timeline in the Edit Mode Monitor
or
b. when you playback the exported Timeline on one of your players
or
c. other
How is it messing up...distorted sound or audio out of sync?
Getting more information on the above will help us to work together to resolve your issue.
Thanks.
ATR

REMSH unix command issues when adding rule for port 514

Similar Messages

Maybe you are looking for