Rename a file at the reciver without mapping with date/timestamp_filename

Hi Friends,
I have a scenario in which I have to rename the file if its exisiting at the reciever end with date/timestamp_filename in a file to file scenario without mapping.
Thanks,
--Sonal

chk this (using adapter modules)
http://wiki.sdn.sap.com/wiki/display/Snippets/DynamicfilenameinaFiletoFilepassthroughscenario

Similar Messages

File to XI scenarion without mapping

HI All,
MY REQUIREMENT:
1. Need to read the data from FILE .
2. pass the values to a BAPI structure in ECC Without any mapping
QUESTIONS:
1. Is it possible to complete the scenario without mapping in XI.
2. If possible how.
Could any one help me how to achieve this
Than you,
Harsha P

My source data structure is same as BAPI.
We have created data types ,message types and Service interfaces for SENDER in ESR.
But our Issues.
1. Do we need to create Receiver Interface Objects.
If yes How (In our scenario receiver is BAPI)
import RFC under imported objects in esr
2. What are the configurations we need to do in ID for SENDER and RECEIVER.
coming to id:
create everything like
communication channels for sender as file and receiver as RFC.
create Agrrements for sender and receiver.
create Receiver determination and interface determination.
Edited by: bhavanisankar.solasu on Feb 21, 2012 4:17 PM

The harddrive holding my itunes library is damaged and I would like to purchase the icloud. Can I restore files to the icloud without the disk/libraries?

the harddrive holding my itunes library is damaged and I would like to purchase the icloud. Can I restore files to the icloud without the disk/libraries? Thanks!

iCloud does not provide a service like Dropbox where you can save random files to it as a way of having external storage. As for the HD damage, don't you have a backup of the itunes library elsewhere? If so, copy it to the replacement hard drive, along with any other important files that were on the damaged HD.

Does allowing adobe flash player plug in on safari give access to websites the ability to upload and transfer documents and files(on the computer) without permission?

Does allowing adobe flash player plug in on safari give access to websites the ability to upload and transfer documents and files(on the computer) without permission? Perhaps to their online server or somewhere where they designated them to transfer to?

It depends a bit on which version of Captivate you used to develop your modules and also which version of Flash Player you targeted when publishing your modules from Captivate. Say for example you use Captivate 5 and publish to Flash Player 10. Then your end user would need to have Flash Player 10 on their computer. It shouldn't matter if their version is 10.0.0 or 10.1.0 or 10.1.3 - just as long as it's a 10. If they only have Flash Player 9 then they will need to upgrade.
The "Access to Adobe.com is restricted" is most likely because the HTML that launches the Captivate SWF sees that you have targeted FP10 and the user only have FP9. Then it tries to direct a call to Adobe in order to present an "Upgrade to latest version of Flash" dialog for the user. This traffic is most likely denied by your IT department.
The first step is to find out which version of Flash Player is the most prevalent in your organization. If it is Flash Player 9 then simply select that when publishing from Captivate 5. If Flash Player 8 is the most used in your organization and you have CP5 or CP5.5 then you are in big trouble since FP8 is not supported from CP5 and CP5.5.
/Michael
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips & Tricks and much more..

Renaming proto files in the browser interface deletes them from my ipad.

Step 1. Create a new proto project, on your ipad. It defaults its name to "Project 2".
Step 2. Add some drawings/text/what ever, just to have something in it.
Step 3. Go back to the "home screen" (top left arrow) to see your samples folder, and the "project 2" listed.
Step 4. Watch it sync to the cloud.
Step 5. Go to https://creative.adobe.com/files and see your project 2 listed there.
Step 6. Rename "Project 2" to something more sensible, like "This is my awesome client project" or, you know, what ever you need to call it, so you know what it is.
Step 7. Go back to your ipad, watch Proto "sync", and the project you just created, vanishes from Proto, meaning you can't work on it any more.
Asking proto to sync, doesn't retrieve it from creative cloud, and now its just on creative cloud, how ever you left it, and I can't figure out how to get it back on my ipad.
This... is a pretty serious bug.
It appears the act of renaming it deletes it from the ipad.

Yes this is a bug.
A workaround is to rename the file on the web to anything with '.proto' on the end. It will then re-appear on your iPad.

How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

marykaymaas wrote:
How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?
either Select All and drag to the left (turn on the Lock Automation menuItem if you have any automation curves)
or
use the Cycle Region to export the exact length you wish:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.

Hi,
I am using APEX version 4.2.1.00.08 with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I've developed an application, that was working fine till 3 days ago...
At the moment, I can log into the application but when I enter my ID/PW it takes me to my 1st page but then it runs for a mint or so (trying to load charts) and then generates following error message
No data received
Unable to load the webpage because the server sent no data.
Here are some suggestions:
Reload this webpage later.
Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
interestingly, I haven't changed anything within the application
I've tried it with Chrome Version 27.0.1453.116 m and IE 8.0...
with IE 8.0, it shows I/O Error in place of my graphs and get's a pop up message that displays "Error - error unknown"
The only thing that I can recall doing differently is logging via remote desktop connection, but I've used remote desktop in the past as well and it worked.
Please advice

anyone...?

Data Associtions not enabling while i am trying to do data mapping with data Associtions in BPM studio what is the reson?

Data Associtions not enabling while i am trying to do data mapping with data Associtions in BPM studio what is the reson?

Shouldn't @StartDate be an input parameter to the stored procedure? @RunDate also?
Example for sp with parameters:
http://www.sqlusa.com/bestpractices2008/stored-procedure-parameters/
The last error will go away upon a successful sp compile.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How to find what are the support-teams map with particular componant type

hi experts,
i am new in solution manager.. My requirement is when creating the support message in crmd_order t-code i have to give the componant type in transaction data after that in fast entry screen i have to assign support team for that componant type .. here i have to give only valid support team which are map with particular componant type .. when save the support message here i have to check that support team is map with that particular componant type (i.e that support team is belong to that componant type ) .. thats what i have to do in abap development .. so how to find the what are all the support teams mapped with particular componant type .. whether it is stored in any table or ?.. Please give solutions ..
Regards,
Kumar..

Hi Kumaresan-
I'm not sure I fully understand your requirement but I will try to help out. If you are trying to determine / associate the relevant support team according to which component they are responsible for, this might help.
The determination of the support team is maintained by configuring rule 13200137 in transaction PFAC_RESPO.
Click on the Responsibilities Tab
Create your responsibility based on your support team requirements
Assign the appropriate Support Team, this data will be taken from the settings you have maintained when creating your org chart in ppoma_crm
Highlight a responsibility and click Change
In this table you will see an entry for SAP Component, this is where you identify which support team will be determined based on component

Must a EntityBean map with data table?

I know Not every data table will map with Entity bean
but must a EntityBean map with a datatable?
rgds

Ofcourse Not, EntityBean Just A style of Bean,
We declare something as EntityBean because it perform some action like a Entity
For Example,A Man Contain some attribute, or A File with some attribute,
usually we have store this in the database ,so EntityBean Usually map with data table.
but you can also store the data in the file format as you like,you can control it in the BMP model
in my opinion ,Entitybean is the object base on the attribute , the Sessionbean is the object base on the action with the user.So we can distinguish them��:-)

Date when the cube was filled with data for the last time

Hi!
We are using a SAP BW System and on top of it BOBJ for reporting. Within BEx Web Application Designer, it's very simple to access the data, when the cube was filled with data for the last time. Is it possible to access this information within BOBJ, too?
Thanks for your help!
Greetings
Stefan

Hallo Ingo,
thanks for your answer. That was exactly what we were looking for.
We will have to think about a workaround now.
Greetings
Stefan

How do i rename multiple files at the same time on a MAC?

I have been a mac user since 4 years now yet i cannot figure out how to rename multiple files in mac. In Pc i used to slect all and rename one e:g "ab.jpg" and the restwould be "ab (1).jpg" automatically. but in the mac its way too hard to do this on the automator. ..
please advise asap!
~haniah

You can do it with Automator.
http://www.automator.us/examples-01.html
Or with a utilities like these:
http://www.publicspace.net/ABetterFinderRename/
http://renamer4mac.com/
You can also do it using the Terminal command line.
Matt

Is there a way to download/view PDF files on the iPad without using another computer?

I just recently purchased the new iPad. I have also downloaded iBooks and a PDF reader. Is there any way to view and/or download PDF files from my iPad, without using an outside computer? Please help!

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
One way is to get the GoodReader app. It has a built in web browser that allows you to web surf and download pdfs into GoodReader. You can read them in the GoodReader app or open them in other apps that can read pdfs.

How can I rename many files at the same time?

Hello!
I have a bunch of PDF files (2 thousand at least) that I need to transfer to another Mac but since it's running OS 9.2 it won't accept the files because the names are too long, therefore, I need a quick way to change all such files into a shorter name but maintaining some of the serial numbers each file name has (i.e., not changing all to the same name but just taking off the first or last 5 characters for example), is there a way to do this sort of thing with OS 10.3.9 or 10.5.2?
Best!
Danny

Look at this shareware. http://www.jonn8.com/ntf/ It's a batch renaming app, but I'm not sure it will do exactly what you want. However, it does have a 7 day free trial.
If you do a Google serach using +batch file rename mac+ you can review a lot more apps.
 Cheers, Tom

Renaming a file on the application server

Hi all,
I create a file on the Application server which I want to rename means a program.
I would like to add the system stamptime at the time the program is running.
sample:
original name:
file.csv
final name:
file_20060626123000.csv
does somebody have an ABAP program to do that ? other ideas?
Thanks in advance,
FedeX

Thanks for the answers,
I do not what I doing wrong in my sample....
I am using this logical path and logical file in an InfoSpoke..
and I get the error:
"could not open file on application server"
My definitions are:
Logical PATH : Z_PATH_TEST
Syntax Group ->UNIX
<P=DIR_HOME>/<FILENAME>
( I am sure DIR_HOME is set correcty on SAP Directories)
Logical FILE NAME : Z_NAME_TEST
Physical Name :File1_<DATE>.csv
Data Format : ASC
Logical Path: Z_PATH_TEST
What could be wrong here?... Thanks again
FedeX

Rename a file at the reciver without mapping with date/timestamp_filename

Similar Messages

Maybe you are looking for