Rename description of component configuration

Hi,
I have create a component configuration CACS_SCTR_AGR_ASSIGN_CHAN_CC_GAF with the description
"ICM: Standard Contract Agreement Assignment Change Comp Conf" .
Now I want to change the description.
How can I rename the description in the new editor for configurations?
Has anybody found the functionality?
Kind regards,
Christian

Hello Simon,
that is it. I thank you.
Kind regards,
Christian

Similar Messages

FPM: Error while creating component Configuration

Hi,
I have installed ABAP trial version (NSP), but without loopback adapter. So, now for every WebDynpro application, I have my manually change link from "http://<mymachineName>:8000" to "http://localhost:8000".
I create an application on FPM component: FPM_OIF_COMPONENT, then an application configuration for this application.
I open this Appl. config. in se80 and press "Start configuration". Now I try to create new component configuration.
After maintaining description and transport information, I save it.
At this point, I get a dump:
"RFC Error while sending logon data"
CALL_FUNCTION_CONNECT_ERROR in CL_WDR_CFG_COMP_SHBROKER======CP.
The class: CL_WDR_CFG_COMP_SHBROKER method: INVALIDATE
has a call: call function 'WDR_INVALIDATE_CFG_PATTERN' starting new task l_cfg_task
exporting client = client pattern = l_instance_name .
where it dumps.
could you please to resolve what could be wrong? is there some system setting which I missed.
Regards,
Daman

Hi ,
This exception is raised when a connection or communications failure occurs.
This exception reports all failures and system problems on the remote machine . so look like there is some porblem with your system connection .
Could you please check in your host file , is that entry for system is maintain or not ?
Hope this help .
Regards,
Dinesh

GP - WD Java: Cannot read callable object description from component

Hi,
i use Guided Procedures and therefore i will generate a WebDynproJ Callable Object inside the GP.
When i try to intergate it into Design-Time i get follwoing error after i picked the WebDynpro Component:
Cannot read callable object description from component: type com.sap.caf.gp.quotcreate.model.bapi_quotation_createfromdata2.types.Vbeln_Va could not be loaded: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
Well because i could import the Model into the WD Component in NWDS with the given JCo i have no clue why this error is now popping up.
Does someone have some experience with this phenomenon?!
I also wanted to check the JCo's in Content Admin but even though i am an Admin (i am sure of this) i have no rights to enter this part. Also the SLD is properly configured!
br

Hi Fritz,
how did you resolve the problem? thanks a lot!
Nicola

Short Dump in Component Configuration during creation

Hi ,
While creating component configuration ,i am getting a message as:
The following error text was processed in the system E12 : Screen output without connection to user.
The error occurred on the application server ecc12_E12_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSKEY
Function: DEVELOPER_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_COMP_CONFIG_CONTEXT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: CREATE_CONFIG_CONTEXT of program /1BCWDY/IB48HP1E9RW91UCEZDMS==CP
Method: RUN of program /1BCWDY/IB48HP1E9RW91UCEZDMS==CP
Method: IWCI_IWD_CONFIGURE_COMPONENT~RUN of program /1BCWDY/IB48HP1E9RW91UCEZDMS==CP
Method: EDIT_COMPONENT of program /1BCWDY/FB00EOBCHT1AUXABNS6J==CP
Method: IF_COMPONENTCONTROLLER~EDIT_COMPONENT of program /1BCWDY/FB00EOBCHT1AUXABNS6J==CP
Can any one suggest the cause of the same
Regards
Akshat

hi,
try refering the help
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
FYI ,for ur general administration data : name of the configuration, description of the text ,name of the associated component,
collection assignment ,original language ,user name of the creator and date created ,changed by/on.
u2022Explicit configuration data :
The availability of a configuration controller in the component is a prerequisite.
On the left side there is a hierarchical list of available context nodes with associated elements, whereby each element can have attributes. The number of elements and the attribute values can be changed. The number of elements can only be changed if the nodes have been defined with 0..1, 0..n or 1..n.
u2022Implicit Configuration data :
On the left is a hierarchical list of views and the UI elements located in them. Next to this on the right are the changeable properties of each UI element selected on the left.
rgds,
amit

Error when trying to create component configuration

Hi!
When I try to create a component configuration, the following error occurs after pressing the <create>-button:
Dynproausgabe ohne Verbindung zum Benutzer (<b>Dynpro output without user-connection </b>)
Applikationsserver PSD1P02_TS3_01 und im Workprozess 0
RABAX_STATE
SYSTEM-EXIT of program SAPLSKEY
Function: TADIR_OBJECT_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_PERS_DATA of program CL_WD_CONFIGURATION_MODEL=====CP
Method: EDIT_COMPONENT of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: IF_COMPONENTCONTROLLER~EDIT_COMPONENT of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: ONACTIONACTION of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: ONACTIONACTION of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==
Has anybody come across that problem and a solution on hand?
Regards,
Thomas

Hi, Koen!
Thanks for your answer. Unfortunatly I' ve only one session open - and that should' nt be too much, should it?
Any other ideas?
Regards,
Thomas

Setting up NWDI for E-Commerce 5.0 and getting" No component configured"

Hi Experts,
Our basis consultant recently installed NWDI. I am having trouble setting up a Track for our E-commerce development.
If i try to save my track it gives the message "No component configured". When I try to setup my Runtime sytem and give the Development system name and Message Server port, it gives the message " Message server could not be contacted". Because of these errors it does not let me save any Track information.
Domain was not defined, so I defined a domain. But Please help in determining what other steps are still needed before i can create a track.
Thanks in advance,
Dips

If anyone knows how to get a user-entered custom value from the item level to a custom java class, please let me know.
I'm still looking into how to extend the quote and allow for the re-use of it, if all the quantity on the line item has not been exhausted.
I can easily add a custom field to the header of a .jsp and access that user entered value by coding against the requestParser.
Example: Parameter xxx = requestParser.getParameter("customerHeaderParm");
But, when I add a customer parameter to the item level of the .jsp, I cannot leverage the same to code and get at the user entered value. The value comes back as null.
The two files I am working with are as follows: orderstatusdetail.jsp and Z_DocumentStatusOrderQuotAction, which is an extension of the standard class, DocumentStatusOrderQuotAction.
I am working with the requestParser within the ActionForward isaPerform() method of Z_DocumentStatusOrderQuotAction. I need to get to those item level values BEFORE the order is created from the quotation.

Component Configuration in webdynpro for abap

Hi Experts,
I have created a component configuration for a webdyn pro component.
When i create this configuration a tab "COMPONENT DEFINED" is not getting enabled.
Please tell me why it is not getting enabled and what is the actual use of this tab.

Hi Archana
Create a context node in your custom controller which is configuration controller and activate the component.
You will now able to see the Component-Defined tab enabled, where you can set the values to the context attributes which are defined in your configurable custom controller.
Thanks
Abhi

Difference between component configuration and application configuration in webdynpro

what is the difference between component configuration and application configuration in webdynpro?

Hi Rohit,
With the component configuration, you can control the behavior of each individual component within a Web Dynpro application or the user interface of individual views. For each component, several records of configuration data can be created.
Using the application configuration, it is now possible to assign the configuration required in the current application to all the components used.
In short : Component Config belongs to WDP Component and Appl'n Config. belongs to WDP Appl'n.
Check this document for more information.
Web Dynpro for ABAP - Component and Application Configuration
Thanks
KH

No component configuration possible for some web dynpros?

Hi experts,
I want to configure buttons for a view. Display of technical information (right click) for UI element
says:
Application: /SAPSRM/WDA_L_FPM_OIF
Web-Dynpro Component: /SAPSRM/WDC_UI_DO_ACC
Window-Info: IV_L_FPC_CA_DETAILS
View-Info: V_DO_ACCOUNTING
Configuration Id: A56B0481584E314F46F1C5E908E8819E
In SE80 no such configuration id (looks like a GUID) is found. What is
the name of the configuration ID? How can I configure this strange WD?
Other views have normal config. id's.
Any ideas?
Thanx.
Joe

Right click on the application name - in context menu chose create\change configuration, and then create application configuration.
While creating your application configuration you will be prompted with a component configuration, click on create and then navigate to component configuration and then you can make settings for visiblity of ur reqd button.
Regards
Manas Dua

How to use custom component configuration

Hi Experts,
For a standard webdynpro object I have created a new z component configuration by copying from existing one. In the standard there are already 2 existing component configuration.
This webdynpro does not have any application created so I am not able to directly assign this component configuration.
During run time in portal when I view the properties I can see a application for this webdynpro component and the standard component configuration being used.
My question is how to use the z component configuration I have created in the webdynpro?

Hi Srinivas
I researched your problem. I hope the below code helps you. You could add the below code to wddoinit.
DATA: lo_api_controller       TYPE REF TO if_wd_component,
          lo_pers_manager      TYPE REF TO if_wd_personalization,
          ls_config_key           TYPE wdy_config_key.
           lo_api_controller = wd_comp_controller->wd_get_api( ).
           lo_pers_manager = lo_api_controller->get_personalization_manager( ).
                 ls_config_key-config_id = 'ZTEST' .
                 lo_pers_manager->load_config_by_key( ls_config_key ).
Regards
Lorraine

New field not appearing in component configuration for standard web dypro

I'm trying to add a new column to a table in an sap web dynpro component. I've enhanced the view to add in the new column but also noticed that it's using component configuration. When I go into the approriate configuration, however, all of the existing columns are there but my new column does not appear. Is there something else I need to do to pull the new field into the configuration?
thanks,
Malcolm.

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

FPM - How to change the title in a component configuration

Hello,
I am working with the component configuration EHHSS_INC_REC_NRM_QAF_V3 (version 7.31) and I need to change the title of the tab. I created an OTR with the text "Report Near Miss test". I changed the application title and I also change the tooltip text in the IDR to this OTR.
When I executed it, I only see the modication on the tooltip. Why the application title is not shown with the modification? How can I modify also the tab and the title?
Thank you for your help!
Marie-Josée

Hello,
Thank you for your time. The application configuration is link to the business object EHHSS_INCIDENT...I did not find a view. I do not have a lot of experience in FPM so can you show me how? I looked in BOPF but I am not able to do it with an enhancement
Marie-Josée

Component Configuration in Webdynpro ABAP

Hello,
I created a Webdynpro ABAP Application which works fine . Then I created a Component Configuration to hide a particular UI Element . Now how can I test it? Also I tried creating a iview on Portal and point to the Application name and Configuration name but still that UI Element shows up.
What is the right way of doing this.?
Thanks

Hi,
To test the web Dynpro Configuration
1) Right click the web dynpro component and select the Create/Change configuration item
2) A new application configuration window opens in that window give your Web Dynpro component name and in the Configuration id give a Name for your configuration and save it
3) After saving a new window opens with list of created configuration find your config file and select it and click on the go to configuration button
4) Here you will find the component name and Configuration id which we have already given
5) Choose change button here you will see Attribute, Component Defined and Web dynpro built-in tabs
6) select the context attribute which you have created in the custom controller with type boolean and set it to false to hide it
save the configuration and test it.
Note: To test the Configuration an configured application will be created under the web dynpro application right click and select test.
You can refer [this|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b52e13c3-0901-0010-8fa6-d11a51821b7c?quicklink=index&overridelayout=true] link.
Regards,
Arun.P

Dynamic switch of component configuration

Hello all,
In my webdynpro application i select a list of addresses. Dependent on selected address i would like to show an address with predefined component configuration.
Selection of addresses and show of an address are implemented in two components but in one application. I have definied configurations for each adress type.
Is it possible to switch the component configuration at runtime?
Or i must create two applications and after selection of an address start the second application with an application configuration?
Thanks
Regards
Paul

hi
good
go through this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0446f5c-fcb9-2910-e082-88becbe3ddc9
thanks
mrutyun^

Component Configuration Problem

Hi!
When trying to create a new Component Configuration, I receive the following error:
The following error text was processed in the system TS3 : Screen output without connection to user.
The error occurred on the application server PSD1P02_TS3_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSKEY
Function: TADIR_OBJECT_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_PERS_DATA of program CL_WD_CONFIGURATION_MODEL=====CP
Method: EDIT_COMPONENT of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: IF_COMPONENTCONTROLLER~EDIT_COMPONENT of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: ONACTIONACTION of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: ONACTIONACTION of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/5EW9TCGM8MA6AXLHVUNF==CP
Has anybody got an idea what the problem could be?
Regards,
Thomas

Hi Thomas,
I have come accross such a error when i am trying to save the Component Configuration. I have saved the component in the $tmp/local objects and later when the object entry comes below the WebDynpro component then I changed the Object directoty entry and changed the package.
Best regards,
Suresh

Rename description of component configuration

Similar Messages

Maybe you are looking for