Rename file at FTP

Hi All
I have written a module in which i am checking wheather the file is duplicate or not -
this is successfully done.
What my new task is i have to include a code in this module that ---
if the file is duplicate rename the file.
How can i achieve this???
Regards
Dheeraj kumar

Hi,
In my opinion rather writing a module for this task if you write a small script which will check the duplicacy of file and at the same time it will either delete one of the duplicate file or rename it (that is as per your requirement).
I do not have any idea about writing scripts but if someone knows then it will be done easly as per my understanding.
Regards,
Sarvesh

Similar Messages

  • Rename file name & format using ftp sender

    Hi all,
    This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
    At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
    client format is  :  SAP_Order.txt (Pervious file name).
    We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
    How can i achieve this requirement?
    Can please suggests me solutions ASAP.
    Best Regards,
    satya,

    Hi,
       if your requirement is to pick the  existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
    then its simple...
    use two receivers instead of one , one for point to target and other for sender itself... (second receiver  is for  changing  the file name format....)
    Hope the above understanding is correct...if not provide more details of your requirement...
    HTH
    Rajesh

  • How do you change name of the files before sending files to FTP site?

    Hi guys,
    my environment is SQL Server 2008 R2.
    Currently, I'm trying to figure out how to tackle the following project:
    I have over 100 files that I need to send via FTP on daily basis.
    Before doing so, I must change the extension of the file to a specific characters stored in a sql server table, for example if the file name is Store1.txt the new name will be Store1.111
    I was hoping that you guys can point me in the right directions :-)
    Codernater

    I would use a script task for renaming, Pass the data from the SQL table with the extension you want via a object variable to the script task iterate the files in the directory and rename as requried
    this code and link would help you
    http://stackoverflow.com/questions/12347881/renaming-files-in-folder-c-sharp
    DirectoryInfo d = new DirectoryInfo("....");
    FileInfo[] infos = d.GetFiles();
    foreach(FileInfo f in infos)
    File.Move(f.FullName, f.FullName.ToString().Replace("abc_","");
    Abhinav http://bishtabhinav.wordpress.com/

  • Using wildcards (*) in sender file adapter - FTP type

    Hi guys!
    Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
    I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
    Thanks for info!
    Olian

    Thanks for all replies..
    I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
    *, ., *.dat, ...  nothing like that works..  Just exact file name.
    I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
    Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
    Is there anybody with this experience, that it works?
    Thank you!
    Olian

  • Rename files or folders in Windows 8 not working

    Rename a file or folder on a Windows CE device is not working from Windows 8 when connected through Windows Mobile Device Center.
    From Windows 7 it worked just fine!
    This has been a problem for a very long time now, and im not alone according to all forums.
    But no fix as far as i can find!
    Is there anyone that have found a fix on this?

    http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-8-unable-to-rename-files-on-pocket-pc/abae21b7-7ee1-41c7-853e-1ac7ea5b0413
    It seems a issue in window 8.x system. Maybe you can ask for a MS support ticket. 

  • No Data in PDF file in FTP server

    Hi All,
    I am trying to place a PDF file in FTP server.
    Used
    CONVERT_OTFSPOOLJOB_2_PDF to convert spool to PDF
    SCMS_TEXT_TO_XSTRING
    FTP_R3_TO_SERVER to transfer data to FTP.
    I am able to see PDF file in FTP and no of pages matches with that of R/3 but there is no data in PDF file.

    To get pdf file , you need to set the itcpo-tdgetotf = 'X' and need to pass in the exporting parameter (options in open_form  function module ).Then in close_form function module take all the data of otfdata table into an internal table . Then use SX_OBJECT_CONVERT_OTF_PDF function module to convert it to pdf.
    I will show with an  example.
    tables itcpo.
    DATA: ch_otf  TYPE  STANDARD  TABLE OF  itcoo.
    DATA: w_otf TYPE itcoo.
    DATA: w_pdf TYPE solisti1. "For PDF
    DATA: i_content_txt TYPE soli_tab.   
    DATA: temp1 TYPE sx_format VALUE 'OTF',
            temp2 TYPE sx_format VALUE 'PDF'.
      DATA: c_printer TYPE sx_devtype VALUE 'PRINTER'.
      DATA: w_transfer_bin TYPE sx_boolean. "Content
      DATA: i_content_bin TYPE solix_tab, "Content
            wa_content_bin TYPE solix,
            i_objhead TYPE soli_tab.
    itcpo-tdnoprint  = 'X'.
      itcpo-tdpreview = 'X'.
      itcpo-tdgetotf = 'X'.
    These three parameters need to be passed along with other required parameters
      CALL FUNCTION 'OPEN_FORM'
           EXPORTING form = xformular
                     language = ekko-spras
                     OPTIONS = itcpo
                     archive_index  = toa_dara
                     archive_params = arc_params
                     device = xdevice
                     dialog = xdialog
                     mail_sender        = sender
                     mail_recipient     = recipient
           EXCEPTIONS canceled = 01.
      CALL FUNCTION 'CLOSE_FORM'
        IMPORTING
          RESULT  = RESULT
        tables
          otfdata = ch_otf.
    LOOP AT ch_otf INTO w_otf.
        CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
        INTO w_pdf.
        APPEND w_pdf TO i_content_txt.
      ENDLOOP.
    converting otf file to pdf file
      CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
        EXPORTING
          format_src      = temp1        "'OTF'
          format_dst      = temp2        "'PDF'
          devtype         = c_printer
        CHANGING
          transfer_bin    = w_transfer_bin
          content_txt     = i_content_txt
          content_bin     = i_content_bin
          objhead         = i_objhead
          len             = v_len_in
        EXCEPTIONS
          err_conv_failed = 1
          OTHERS          = 2.
    Then open dataset and transfer to ftp of the content of table content_bin(i_content_bin) as shown in above example.
    I think this will be helpful for you

  • Sharepoint 2013 ItemAdded event receiver for renaming files is not working

    In SP 2013 I coded an event receiver that intercepts the ItemAdded event and it just renames the file.
    It is a synchronous event (I added <Synchronization>Synchronous</Synchronization> in the Elements.xml).
    This is the code:
            public override void ItemAdded(SPItemEventProperties properties)
                SPSecurity.RunWithElevatedPrivileges(delegate()
                    try
                        OutputDebugStringA("Inside ItemAdded");
                        string szHttpUrl = properties.WebUrl + "/" + properties.AfterUrl;
                        SPWeb openedWeb = properties.Web.Site.OpenWeb(properties.Web.ID);
                        SPFile spf = openedWeb.GetFile(szHttpUrl);
                        EventFiringEnabled = false;
                        string szUrl = properties.AfterUrl;
                        szUrl = szUrl + ".renamed";
                        string szNewFileName;
                        if (szUrl.LastIndexOf('\\') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('\\') + 1);
                        else if (szUrl.LastIndexOf('/') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('/') + 1);
                        else szNewFileName = szUrl;
                        if (properties.ListItem != null)
                            properties.ListItem["Title"] = szNewFileName;
                            properties.ListItem.Update();
                        spf.MoveTo(szUrl);
                        EventFiringEnabled = true;
                        base.ItemAdded(properties);
                        OutputDebugStringA("Renaming to " + szUrl);
                    catch (System.Exception exception)
                        OutputDebugStringA("ItemAdded ERROR: " + exception.ToString());
    The problem is that when I upload a .txt file using Internet Explorer, just after the renaming is done, IE says that something went wrong and when I inspect the log files I see:
    SPRequest.GetFileAndFolderProperties: UserPrincipalName=i:0).w|s-1-5-21-4050800873-4278272723-3073177257-500, AppPrincipalName= ,bstrUrl=http://sp2013/sites/demo/subsite1 ,bstrStartUrl=Shared Documents/test2.txt ,ListDocsFlags=16400 ,bThrowException=True 0fa7689c-674b-5045-c3a2-b214a5d4cbed
    01/09/2014 15:29:26.75  w3wp.exe (0x1544)                        0x16F4 SharePoint Foundation        
     General                        ai1wu Medium   System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>,
    StackTrace:    at Microsoft.SharePoint.SPWeb.GetFileOrFolderProperties(String strUrl, ListDocsFlags listDocsFlags, Boolean throwException, SPBasePermissions& permMask)     at Microsoft.SharePoint.SPFile.PropertiesCore(Boolean
    throwException)     at Microsoft.SharePoint.SPFile.get_Length()     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.OnSubmit(Object o, EventArgs e)     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadExPage.OnSubmit(Object
    o, EventArgs e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeSta... 0fa7689c-674b-5045-c3a2-b214a5d4cbed
    ...gesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
    context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    rootedObjectsPointer, IntPtr nativeRequestContex... 0fa7689c-674b-5045-c3a2-b214a5d4cbed
    ...t, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
    pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 
     0fa7689c-674b-5045-c3a2-b214a5d4cbed
    So it is clear that the fact that I renamed the file is causing an issue in the SharePoint upload logic.
    As a solution what I did was to not declare it as Synchronous, but if I do it then there is another error when Sharepoint shows the Edit Properties dialog... in this case the upload is OK but when it is time to show that Edit Property dialog IE fails and
    says that the file has been already modified, or that "something went wrong".
    If I use a synchronous event I get one problem. If I use the asynchronous event I get another problem... It's very frustating and I am pretty sure that a so important API like Event Receivers should have support renaming files so I hope someone can tell
    me what I am doing wrong.
    Thanks in advance

    May be you want to consider using the following code and see if it works for you.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/40c78e03-2dca-4083-89d2-a7430099da68/how-do-i-change-the-name-property-of-a-file-in-a-document-library?forum=sharepointdevelopment
    Amit

  • How to read the file from ftp server

    Hi
    I need to read a file from a ftp server . Iam using apache lib common-net .jar .
    FTPClient ftp = new FTPClient();
    ftp.connect(server);
    ftp.login(username,password);
    FTPFile[] files = ftp.listFiles();
    for(int i=0 ;i<files.length;i++){
    System.out.println(" File : "+ i + " - " + files);     
    InputStream ip = ftp.retrieveFileStream(path);
    I got the inputstream from the ftp server. but iam not able to read the contents of the file ....
    help me plzzzzz

    Hi
    I have one more problem . first i try to read the file and write the file in local directory . then i try to read the data in the remote file .. iam getting the datas as null.
    InputStream ip = ftp.retrieveFileStream(path);                    
    File f = new File("D:\\ftp.txt");                    
    FileOutputStream fo = new FileOutputStream(f);
    byte[] buf = new byte[1024];
    while ((len = ip.read(buf)) > 0) {                         
    fo.write(buf,0,len);               
    fo.close();
    BufferedReader br = new BufferedReader(new InputStreamReader(ip));
    String line;
    do {
    line = br.readLine();
    System.out.println(" data " +line);
    }while (line != null);

  • Error while downloading PDF file from FTP Server

    Hi Friends,
    I have sent a PDF file with data to FTP , Then i want to check that uploaded pdf file , whether that is correct or not?
    for that , i have downloaded that file from FTP and i am trying to open the file . but it is giving this problem .
    "There was an error opening the document . The file is damaged and could not be repaired."
    will you suggest me regarding this.
    thanks in advance.
    balaji.T.

    CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
              EXPORTING
           SRC_SPOOLID                    = spoolno
                src_spoolid                    = wa_file-rqident
                no_dialog                      = ' '
          DST_DEVICE                     =
          PDF_DESTINATION                =
              IMPORTING
                pdf_bytecount                  = numbytes
                pdf_spoolid                    = pdfspoolid
          OTF_PAGECOUNT                  =
                btc_jobname                    = jobname
                btc_jobcount                   = jobcount
              TABLES
                pdf                            = pdf
              EXCEPTIONS
                err_no_otf_spooljob            = 1
                err_no_spooljob                = 2
                err_no_permission              = 3
                err_conv_not_possible          = 4
                err_bad_dstdevice              = 5
                user_cancelled                 = 6
                err_spoolerror                 = 7
                err_temseerror                 = 8
                err_btcjob_open_failed         = 9
                err_btcjob_submit_failed       = 10
                err_btcjob_close_failed        = 11.
    because of this one PDF internal table is obtained.
           OPEN DATASET L_FILENAME  FOR OUTPUT in text mode  MESSAGE MSG.
      LOOP AT pdf.
        CONCATENATE pdf-tdformat       "Material group
                     pdf-TDLINE       "Basic Material
               INTO ITEXT-TLINE ..
        APPEND ITEXT.
        TRANSFER ITEXT TO L_FILENAME.
      ENDLOOP.

  • Problem while reading the file from FTP server

    Hi Friends,
    I have a problem while fetching files from FTP server.
    I used FTP_Connect, FTP_COMMAND function modules. I can able to put the files into FTP server.
    but I cant able to pick the files from FTP server.
    anyone have faced similar issues kindly let me know.
    Thanks
    Gowrishankar

    Hi,
    try this way..
    for reading the file using FTP you need to use different unix command ..
    Prabhuda

  • How to read .xls file from FTP server t oInternal table

    Hi
    am using the FTP_SERVER_TO_R3 to read xls file from FTP server to internal table
    but the data i get in LT_TEXT is special characters.
    CALL FUNCTION 'FTP_SERVER_TO_R3'
    EXPORTING
    handle = hdl
    fname = f_name "ProdDataFromCRM.xls.
    * CHARACTER_MODE = 'X'
    * IMPORTING
    * BLOB_LENGTH =
    TABLES
    BLOB = lt_text
    * TEXT = lt_text
    EXCEPTIONS
    TCPIP_ERROR = 1
    COMMAND_ERROR = 2
    DATA_ERROR = 3
    OTHERS = 4
    can any one help me out to get the exact data..
    Really appreciate your quick response..
    Thank You

    Hi, if you really retrieve an excel file, you can not see the data in ABAP. You may see them in Excel. For this you may use
    CALL METHOD document->open_document_from_table
    of the interface i_oi_document_proxy for OLE objects. You can access the data with reference to the interface i_oi_spreadsheet.
    Please check [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf] for details.
    But, who knows, perhaps you want "And Now For Something Completely Different".
    Regards
    Clemens

  • Need to copy .txt file from FTP server and downloaded on local server directory.

    I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.

    Below links will help achieving it:
    https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
    http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/

  • How to read XL file from FTP server

    Hi all,
    I have a requirement like to read file from FTP server using path
    ftp:
    10.212......\DTR\DTR_ Accounted_Out
    and again save  other file in same location ,
    to doing this RFC connection is required?
    give a  procedure or program to do this requirement ..
    To create rfc for FTP which connection type can i use ?
    Give complete settings to create rfc destination

    Hi Rakhi,
    Use the below code to check if you have received the proper data.
    call function 'FTP_SERVER_TO_R3' "Get data as character instead of BLOB
        exporting
          handle         = hdl
          fname          = docid
          character_mode = 'X'
        tables
          text           = chardata.
    If the data is incorrect, it is possible that you are in the wrong directory.
    Use
    call function 'FTP_COMMAND'
        exporting
          handle        = hdl
          command       = 'cd mydir\mysubdir' "cd <space> your path
        tables
          data          = result
        exceptions
          tcpip_error   = 1
          command_error = 2
          data_error    = 3.
    Regards,
    Jovito.

  • Problem with downloading file from FTP server

    Hello all
    I have uploaded a file from an application i developed and i want to download this file from another application. The code is
    public static void FTPcon() throws FtpException{
       String hostname = "my.ftp.server";
       String username = "myusername";
       String password = "mypass";
       Ftp ftp = new Ftp(hostname,username,password);
       ftp.setHostname(hostname);
            ftp.setUsername(username);
            ftp.setPassword(password);
            ftp.connect();
            ftp.setBinary();
            ftp.download("file.dat");
            ftp.disconnect();
    }The error i receive is java.io.FileNotFoundException: public.dat (The system cannot find the file specified) but the file is on the server.
    Thanks in advance for any help

    Cotton thank you for your reply
    Any other sugestions please?The server disagrees. So...
    - the file does not existThe file exists.I checked it with an FTP client program.
    - the file has a different nameThe file name is correct
    - you are connected to the wrong serverI am connecting to the correct server
    - you are in the wrong ftp directoryThe file is placed in the home directory
    - the ftp library you are using is broken (less
    likely)I am using the library from jscape.I dont think is broken because i can upload the file from the first application.
    >
    FTP isn't somehow broken in Java. I use it all the
    time. The problem is something listed above. I would
    check all of the first four if I were you because
    that's most likely where the problem is.Message was edited by:
    flightcaptain

  • Problem in download file from FTP server

    Hi
    I want to download a file from FTP server for that i am using the apache FTP module but i am not getting how to download a file with that api i can dispaly the list of files and folders but not able to download the file or folder can any one help me in this
    Thanks
    Ninad

    Hi
    I think you miss understood something I am writing a program to download the file in Java where i have used the jakarta.apache api for that and getting problem in that bellow is the code where I have written to print the directory & file names but I don't know how to download the file
    FTPClient ftpConnection = new FTPClient();
    ftpConnection.connect(host);
    ftpConnection.login(FTPConnection.userName,FTPConnection.password);
    FTPFile fileList[] = ftpConnection.listFiles();
    for(int i=0;i<fileList.length;i++)
         System.out.println(fileList.getName());
    thanks
    Ninad

Maybe you are looking for