Rename node in process chain

In the process chain in left side screen I need to change Node name descript. "Not Assigned" to "New Name". Please advice how to do that ?.
Thanks
Liza

Hello,
In the RSPC Screen Choose your PC -> Choose the Node icon (Tree sort of icon) -> In the pop-window choose the node if exits or in the bottom of the screen you will find new icon. Create and assing your process chain.
After assigning , refresh or just use /nRSPC to refresh and you can see your PC in the new node you have selected.
Thanks
Chandran

Similar Messages

Node for Process chain--Urgent

Hai All,
I am having a group of process chains and i want place in a single node or a folder.
How to create that node or folder.
Thanks in Advance.
Regards.
Vikram Singh

Hey i tell you very simple way by which i do always....
1.When you create a process chain usually it goes to nonassigned folder
2.To assign a folderdouble click and open your process chain which is under not assigned folder
3.Click on pencil icon in top menu bar for modifying it
4.Press CTRL+F11(for display components).
5.A popup will come Assign Display grouping-Press F4
6.You will find different folders thereeither select any of the existing folder where you want to put that process chain or-
Press F5--to create a new folder
Enter Application Component(folder name) and its long text--and press enter(or green tick)
7.Select that Application component-->green tick (enter ) -->save(ctrl+s)
8. Press Refresh button on left side...
and you are done....
Assign points if helpful..
Regards,
Rocks

Nodes in process chains

Hi
I have lot of nodes in rspc in which there are lot of chains in indivisual node.but now i want to make a single node and then put these multiple nodes in in that one main node.
is that possible if yes please let me know how?
Regards,
Vikram

Hi Vikram......
U hav to enter the technical name of the pC in RSPC1............then the chain will open in the Planning view.........right..........then......Click on the Process Chain tab in the top >> Attributes >> Display component >> F4 >> There click on Create >> Give the Application Component name and Description .......
Regards,
Debjani.....

Syntax error when executing a process chain.

Hi gurus,
This is a weird problem that we have been facing since yesterday. In the transaction RSPC, we had created a process chain in Feb 09. It ran smoothly till yesterday. However when I try to schedule the process chain now, it gives me a dump stating Syntax error in program "CL_RSDMD_IOBJ_U_TPL===========CP ".
This same dump is generated whenever I try to display variant of one of the nodes of Process Chain.
I tried checking the corresponding programs but in vain. I have no Idea why am I receiving the error.
If anyone has faced this problem please post the same.
The following is brief overview of the dump.
Information on where terminated Termination occurred in the ABAP program
"CL_RSBK_DTP_DATABASE==========CP" - in "COPY_FROM_DB". The main program was
"RSPC_MAINTAIN ".
In the source code you have the termination point in line 166
of the (Include) program "CL_RSBK_DTP_DATABASE==========CM003".
Any help would be appreciated.
Regards,
Sree.

Hi Rayapa,
There is no Long text as such, however, there is a short text which I have mentioned in my question itself.
And there is a What Happened
which is as follows
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSDMD_IOBJ_U_TPL===========CP " in include
"CL_RSDMD_IOBJ_U_TPL===========CM00E " in
line 4:
"Field "P_BOOKMODE" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
The include has been created and last changed by:
Created by: "SAP"
Last changed by: "<My SAP user>"
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
thnkz n regards,
Sree.
Edited by: Sree Nair on Apr 3, 2009 12:10 PM

Skip steps in process chain if 0 records received from InfoPackage

Hi Experts,
In one business scenario, we need to change existing process chain such that if InfoPackage/DTP has brought 0 records process chain should skip rest steps or it should get failed.
Do you have any ideas about this.
Regards,

Dear Ganesh,
you can change the traffic light color for empty request in the infoPackage maintenance window. Top menu --> Scheduler --> Traffic light color for empty request.
Using this option and connecting process chain nodes correctly, process chain execution will stop whenever the infoPackage gets 0 records.
For a DTP, you can use ABAP code in the start routine of the corresponding transformation. You should check the contents of SOURCE_PACKAGE internal table and raise exception accordingly.
I hope this information helps you.
Best regards,
Nacho

Calling r/3 program from process chain

Hi
I did the following steps to call r3 program from process chain :
Steps in R/3 system
1. Created a program which needs to be called from bw and at the end of the program i have calling 'RSPC_ABAP_FINISH' function module & passing the rfc id of bw system and bw process variant.
2. created a even in r/3 (please note that this is not there in bw)
3. Created a job and under start condiion selected 'after event' and mentioned the event created earlier. And under step1 enter the abap program to be executed
Steps in BW system :
1. Created a process chain
2. inserted a process type 'abap program' and selected the call mode 'Asynchronous' and under destination entered the RFC destination of R/3 system. Under scheduled program enterd the event name created in R/3
after executing above process chain, the abap program node is becoming green but the abap program is not getting executed in r/3 system. And also the process after the program node in process chain is not getting executed. The job which was created in r/3 still showing the released status
Kindly advice where i am wrong.
Thanks
RKS

any input

How to move the process chain from Unassigned node to a new node in 3.5?

Hi all,
I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
Thanks
Poooja

Hello,
Try this....
Double click on your process chain. Via the menu select:
Process chain > Attributes > Display components
Select F4 (possible entries)
At the bottom of the window you will find a create icon
to make your own component.
After you created it, assign it to your process chain.
Don't forget to save the process chain.
Regards,
Sivaram

Process Chain - Node untriggered.

Hi gurus,
I have faced this typical problem a couple of times now, At times, while the process chain is executing, the node that has got executed successfully is green, and everything for this node is fine, the corresponding job is finished with status green. However the immediate next node is not triggered. I tried checking the logs and everything seems fine, the background jobs are all working absolutely fine. Why am I facing this issue.
I can reschedule the process chain, but this process chain takes almost 5 hours to run. Is there a way I can trigger the next node manually since the previous node is successfully executed. Please post if anyone has faced this situation earlier. Points would be granted for helpful answers.
Rgds,
Sree.

Hi
Right click on the green block, from where the next block is not triggering. Take the variant and instance value.
Goto table RSPCPROCESSLOG and give the variant and instance value as input. Check the state field value. It should be G (i.e. successfully completed) then only next block will be triggered.
If you want to start next block manually, goto function module RSPC_PROCESS_FINISH, give i_logid, i_type, i_variant and i_instance values from RSPCPROCESSLOG table and enter i_state value as G.
After executing the function module, next block of the process chain will automatically start.

Process chain not continue after successful node

Hi gurus,
   In my process chain I load data from R/3 to PSA and then execute DTP to DSO, all actions are serially. Usually our PC is running well. But recently the PC will stop after the loading to PSA was successfully end , which means in the log view of PC this node was green.
   I have checked the table RSPCPROCESSLOG, the entry here was also marked as successful. ( STATE = G )
   I have no idea why this PC wouldn't continue automatically?
Regards,
Aaron

Hi Ashok,
We have tried manually execute DTP to load data from PSA into DSO. Everything is OK. And as I mentioned, this PC was OK before! Sometimes when execute the failed PC several times, it runs correctly.
   This is why it looks so weird! I guess is it related to time exceed (load to PSA cost 2 hours) or some potential restrictions?
Regards,
Aaron

Process chain node is in yellow colour but job completed successfully

Hi All,
I have one master data load process chain. This process chain have one child process chain also. Parent process chain was showing Fail for one child process chain. When I checked child process chain I got to know that one info package is still in the running state. When I checked the monitor of the data load , It is showing successful data load , even i have checked in batch job log , it is also showing ' JOB COMPLETED SUCCESSFULY'.
Now as this node is in ruuning state , all lined up process are on hold.
Please help me with this issue.
Thanks in advance.

hi,
open the child process chain, right click on the variant at which it is struck. note down the details such as log instance,variant.
open table rspcprocesslog in SE12 ,give the details of variant and job logs and find the instance id.
open tcode se38 ,enter program RSPC_PROCESS_FINISH.
execute it, enter the details obtained from table rspcprocesslog table for the same and set the status to "G" and execute.
the process chain will be triggered.
regards,
Arvind.

Process chains node change

Hi All,
Please let me know how to change a process chain from "not assigned node" to desired node.
Your help is appreciated.
regards
raveena

Hi Raveena,
Please see how to do this from the following thread:
Re: Change the Directory of a Process chain.
Hope this helps...

Process Chain - changing the node

Hi,
I have created a Process Chain for loading data into 0FIAP_C03. This chain has got created under "Not Assigned" Node.
I want to move this Process Chain to "Finance" Node. How can I make this possible ?
Regards,
Amogh

open your Process chain in Change mode > Selcect Process chain (from the Menu)> Attribute --> Display Components Select your Finance node form the dropdown and then Activate the Process chain
Now refresh , you can see the Process chain moved from Not assigned to Finance Node.

How can we set a process chain to trigger the nodes w/o manual intervention

SDNers,
We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

Hi ravi,
i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
fine...
b4 to this make sure that there is no dependency for the previous loads....
And now the solution i found for this is in the process chain design itself.......
while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
rgds,
nkr.

Rename ABAP-Job in process chain

Hello experts,
how can I change the job-name (SM37) of a ABAP-Program that starts within a process chain?
Now all ABAPs that are started within a process chain are called: "BI_PROCESS_ABAP"
Thank in advance

Not sure where you want to go with this idea. If you are trying to create a new naming scheme in general, e.g. ZBI_PROCESS_ABAP, or if you want to change indiviusla job names so you can more readily identify what a particular BI_PROCESS_ABAP job does.
If it's the latter, I thin kyou will end up creating a maintenance headache, because when you modify and reschedule a chain it wouldn't delte teh old job and it would create a new one with the standard BI_PROCESS_XXXXX job name.
Have you looked at Tran RSM37 ? It provides process chain name info when you pull up a list of jobs, not a perfect eample, but this should give an idea of, e.g.
Background Job Name     Status     Selection     Selection value     Selection     Selection value     Selection     Selection value
BI_PROCESS_ABAP     Released     CHAIN     0TCT_C2_INIT_P01     TYPE     ABAP     VARIANT     0TCT_START_DATALOAD_PC
BI_PROCESS_ABAP     Released     CHAIN     0TCT_C0_INIT_P01     TYPE     ABAP     VARIANT     0TCT_START_QUERYRUNTIME_PC
BI_PROCESS_ABAP     Released     CHAIN     ZMD_D_METACHAIN     TYPE     ABAP     VARIANT     ZBW_START_PM_DAILY_PC
BI_PROCESS_ABAP     Released     CHAIN     ZSR_D_MD_META     TYPE     ABAP     VARIANT     ZSR_D_MD_COMP
BI_PROCESS_ABAP     Released     CHAIN     ZMD_D_METACHAIN     TYPE     ABAP     VARIANT     ZBW_START_FI_DAILY_PC
BI_PROCESS_ABAP     Released     CHAIN     ZMD_D_METACHAIN     TYPE     ABAP     VARIANT     ZBW_START_FM_DAILY_PC
BI_PROCESS_ABAP     Released     CHAIN     ZMD_D_METACHAIN     TYPE     ABAP     VARIANT     ZBW_START_GS_DAILY_PC
BI_PROCESS_ABAP     Released     CHAIN     ZMD_D_METACHAIN     TYPE     ABAP     VARIANT     ZBW_START_SRM_DAILY_PC
BI_PROCESS_ABAP     Released     CHAIN     ZMM_D_META_1     TYPE     ABAP     VARIANT     ZBWPR_V3_BEGIN_03
BI_PROCESS_ABAP     Released     CHAIN     ZMM_D_META_1     TYPE     ABAP     VARIANT     ZBWPR_V3_BEGIN_02

Toggle Option in Process Chain not working

Hello SDNers,
I am experiencing the below scenario with one of my process chain.
Process Chain FLow
Start
|
|
Local Chain (To delete the already existing file from Application Server(ZFTP))
|
Local chain to rename the file
|
|
Local chain (Load data to cube)
|
|
Local chain to backup a file from Appl. Server
In the above flow, the step 2 has been set to proceed further even if there are no files to delete in the application server. To achieve this I am using a toggle option between the step 2 and 3.
At times, the chain progress further when there are no files to delete as expected but not all the times.
I am trying to figure why the step which is supposed to progress further is not progressing some times even though it has been set to move further.
Any advice would be helpful.
Regards,
Vinoth

Hello Venkatesh,
Thank You for your Patience.
I have BW systems both running in the SAP_BW Versions 730 & 701.
I have checked the folders " Other BW Processes " & "Other" and below are the process types.
Other BW Processes
Attribute Change Run
Adjustment of Time-Dependent Aggregates
Deletion of Requests from PSA
Deletion of Requests from the Change Log
Execute Planning Sequence
Switch Realtime InfoCube to Plan Mode
Switch Realtime InfoCube to Load Mode
Reorganize Attributes and Texts for Master Data
Execute Analysis Process
Update Explorer Properties of BW Objects
Other
Event in SAP CPS
Job in SAP CPS
Last Customer Contact Update (Retraction)
Regards,
Vinoth V

Rename node in process chain

Similar Messages

Maybe you are looking for