Rename Tables in Numbers 3.0

I've been using Numbers '09 for several years, and I have one spreadsheet that has 2 sheets (2012, 2013) and each sheet has multiple tables.  In Numbers '09, I was able to copy and entire tables, and after the paste it would have the same name as the previous table.  i.e. Original table would be called Oct 12-13, and the Pasted Table would then be called Oct 12-13-1.  I could then rename the Table to Oct 19-20.  In Numbers 3.0, I am unable to rename tables. 
Has anybody been able to find a way to rename individual tables on a sheet?

Hi dbutlerman,
That confused me too at first. In Numbers '09 I figured out how to display and change the name in the Table Inspector.  In Numbers 3.0 I couldn't find how to change the name in the Table pane at the right.
But I tried doubleclicking the table name itself on the sheet and found I could edit it right there. 
For me, more intuitive and convenient than Numbers '09.
SG

Similar Messages

  • I cannot add form to table in Numbers

    I have a table in Numbers (iOS 8.1.2, iPhone 6 Plus) that I'm unable to add a form for. It has a header row designated (one header row). What would cause something like this?

    Yes thanks. I had all of those requirements. I ended up deleting the table and re-adding. I think the issue was I was pasting in values from Excel (on OS X Yosemite) into the Numbers app on Yosemite, then accessing on my iPhone. Basically I think I just really confused Numbers on iOS. It's working fine now.

  • Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box  at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

    I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
    If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

    The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
    When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
    But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
    For the example, the values list for the pop-up menu was:
    5
    3
    1
    Choose
    -1
    -3
    -5
    The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
    For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
    Regards,
    Barry

  • How do I paste a table from Numbers or Excel into Ibook Author exactly as the original?

    I am new to iMac and Ibook Author.
    I am writing a statistical paper in Ibooks Author.
    I have Chapter heading, now section heading and body.  I want to paste a table from numbers or excel into my iBook as this has the results of my analysis.
    As part of my analysis, I want to copy a 5 column table with 633 rows, which is essentially my table of data.  I have the table in numbers and excel.
    When I copy the table in numbers or excel, followed by pasting (CmD V) into iBooks, I get the first 20 rows in a table format and the remainder of the table is missing.  The table appears to end at the end of the page.
    I can not figure out how to paste the entire data as my table.
    Its holding me back...
    Any ideas?

    Hello Loquitir,
    I am not fully sure if I understand but I gather since there are so many rows only a certain amount fits on a single page.
    How many rows does actually fit on a page in iBooks Author?
    There is a method that would look pretty cool that is used to create a double page spread that would look great but instead of having a double page you could maybe have three or four pages.
    Here is a quick idea that I stuck together, additionally when you are copying and pasting form Numbers to iBooks Author just select the cells that you want.
    Copy and paste within iBooks Author and then go back and get the next row of the table that you want.
    I hope I am clear in what I am describing.
    Regards,
    Nigel

  • Listview for new sheets and tables in numbers 3.0

    Hi there,
    when adding a new sheet or table in numbers 3.0 you get them in a horizontal bar under the symbol-bar.
    If you need severals sheets it directly get confusing.
    In numbers 09 numbers used to add new sheets in a list view on the left side of the window. And the tables
    subordered to each sheet. Is there a possibility to change this view in numbers 3.0 to the same view
    as used in numbers 9.0?
    If not I will directly change again to 9.0 and hope the apple starts beeing again the big company they
    used to be a couple of years ago. They start sucking!

    Hi Yellowbox,
    I apreciate your answer.
    I already switched back to 9.0! To have the sheets and their subtables on left site in listview matches my business scenario. For making calculations for severals companies working on the same project, it is more comfortable to have one sheet per company and for each related service an exra table. For me it wouldn't be clear anymore while using 3.0.
    Thanks again for your effort.
    My big question is, way want somebody forcing you to do something like they think it should be!?
    The machines are very powerful. So please let us work / use the tools as we feel the best.
    The strategy to force someboy to used in a special manner, used to be typically for Microsoft.
    This is one good reason why a lot of people switched to Apple!     THINK DIFFERENT!!!! and not
    THINK LIKE US!!!
    Please rethink companies politics.
    What is the matter of having Icloud if I only can load special material, with only certain special software releases?
    What is the matter of having Fotostream if i am forced to delete a picture from every of my devices wich costs a lot of time! Where ist the option, delete from this advice or completey from icloud?
    What is the matter of having such expensive products like Ipads/Iphones/... if I need special apps which aren't at all comfortable to load unload single fotos / ...
    What is the benefit of having time machine if it only works with special hardware? I have a perfectly running 12TB BackupSystem/NAS and can't us it!
    Why should I spent so much many to have the best computer equipment if I can't use it like i need it?
    And please from release to release the system is more and more bothering and interacting with the user... this is one of the reason why Microsoft products are so horrible. When I am sitting on my computer I want WORK and not getting one alert, warning, interaction behind the other. I want work! I want to be effective! So please, give up from this method of interacting with the user.
    Why has Iphoto to be so aggressive? I dont want to put pictures in events. And neither and predifend events respecting the time stamp! I just want to have a file watcher which keeps up to date a tree (with the manipulating options of Iphoto) of a certain folder structure. NOTHING ELSE!
    APPLE = GOOD PRODUCTS, BUT ALMOST NOT USABLE
    Maybe I should switch again to SuSe Linux ;-)

  • How can I copy tables from Numbers to Pages without formula?

    hi everyone
    i need help
    How can I copy tables from Numbers to Pages without formula in the cells?

    Ok... I see your problem... when pasting into Pages, the formulas from Numbers are included. Perhaps this is really more of a Pages question (in which case I'm far from expert). A couple of ideas:
    • In Pages, try "Edit"/"Paste and Match Style", which may insert tab delimited cell values (no formulas). Then, if you want the table format back, select these newly pasted tabbed values and use Page's "Format"/"Table"/"Convert Text to Table"/
    • In Numbers, before copying, make a temporary table of the plain values first, then copy and paste that into Pages. To do this, select the range of cells you desire in the Numbers and "Edit"/"Copy". Then "Edit"/"Deselect All" and "Edit"/"Paste Values" and "Edit"/"Cut". Now just a table of values is on the clipboard and you can head over to Pages to paste.

  • ORA-20079:  WM internal error [unable to rename table]

    Hi,
    I am getting following error when i try to enable versioning on a table. Any idea how to resolve it ?
    BEGIN DBMS_WM.EnableVersioning('TestTable'); END;
    ERROR at line 1:
    ORA-20079: WM internal error [unable to rename table]
    ORA-06512: at "SYS.LTDDL", line 1615
    ORA-06512: at "SYS.LTDDL", line 1193
    ORA-06512: at "SYS.LT", line 647
    ORA-06512: at "SYS.LT", line 8024
    ORA-06512: at line 1
    thanks
    -na

    Hi,
    You need to determine the original error that is being generated by oracle. This can be done by attempting to rename the table yourself. For example:
    SQL> alter table TestTable rename to RenamedTable ;
    That will give you a better understanding as to why Workspace Manager is unable to rename the table. Also, what version of the database and workspace manager are you using ?
    If the direct rename succeeds while enableversioning continues to fail, then you would need to file a TAR on this.
    Regards,
    Ben

  • Working with two or more tables in Numbers

    Working with two or more tables in Numbers
    It is possible to write numbers or names in Table 1 B-2, B-3, B-4, B-5, B-6 etc. and automatically copy in Table 2 only B-2, B-4, B-9, B23 etc.
    What do I need to do???
    Thanks for the help

    The table on the left is named "Source" and on the right "Destination":
    In the table "Destination" on the right:
    B2=Source :: B2
    select B2 and fill down

  • Having a hard time creating a shopping list table in Numbers

    I'm trying to create a standard shopping list of about 100 standard items we like to always have available (this helps for budgeting purposes and also keeps last minute trips to the store to a minium, in case you are wondering).  I just started a table in Numbers.  I need some cells to be different sizeds (not just columns or rows)  than others  -- is this possible?   I haven't found the help on the toolbar to be particularly helpful.
    I'm finding Numbers rather frustrating . . . .I know it's me though.

    If the contents of a cell are lists, and different lists have a different numberof items
    Suzanne,
    Probably best to think of having just one item per cell. The cells can then be grouped, manipulated, counted, and summed in the many useful ways that spreadsheets are designed for.
    For some simple examples of lists you might want to check out the Checklist and Checklist Total templates. In your menu go to File > New, and you should see this:
    SG

  • Is it possible that rename table captured by streams

    is there any way that i can capture rename table??

    Just setup your rule for DDL to the schema level and it will.
    Use dbms_streams_adm.add_schema_rules instead of dbms_streams_adm.add_table_rules.
    Regards,

  • How do I create a pivot table in numbers?

    How do I create a pivot table in numbers?

    SO HERE'S WHAT I GOT TO WORK:
    Truth is all the real functionality of categories and pivot tables exists in the formulas. You just have to
    Create a new table with a list of the categories in the header column.
    Add SUMIFS() formula from the browser into the next column.
    Enter your arguments and make sure to check "Preserve Column" for each of them.
    Although it might not be apparent, you can enter multiple test value and condition pairs.
    While I admit the formulas are not nearly so graphic as categories, they are cleaner and less restricting, and they aren't any more difficult to work with than pivot tables.

  • Rename table

    how to rename table using export and import utility ??
    Thanks 10

    883532 wrote:
    how to rename table using export and import utility ??
    Thanks 10What is the version?
    In 9i its not possible to rename table using export/import, why not using SQL? its very simple
    SQL> create table emp_new as select * from emp;
    if its above 10g.then
    $expdp system/***** tables=scott.emp dumpfile=emp.dmp logfile=emp.log directory=data_pump_dir
    $impdp system/***** dumpfile=emp.dmp logfile=emp_imp.log remap_table=emp:emp_new directory=data_pump_dir
    HTH.
    User Profile for 883532
         883532      
         Newbie
    Handle:      883532
    Status Level:      Newbie
    Registered:      Sep 6, 2011
    Total Posts:      28
    Total Questions:      18 (12 unresolved)
    Keep the forum clean as much as possible by marking threads as answered.
    Edited by: CKPT on Feb 20, 2012 10:00 PM

  • Revers table in Numbers

    How to revers table in Numbers from left to right for English to right to left for hebrew?

    Hi Ian,
    Just as a test, I added Hebrew in System Preferences > Language and Region then restarted my Mac. Never again! Very, very frightening! I am lucky that I am now back in Australian English.
    Like you I tried Hebrew when I tested, thinking that might somehow trigger Numbers to add the non-existent menu items described in the help to which Nubz linked. After all surely an Apple representative couldn't be leading us astray, so my thought was that I must have been missing something! But of course, no joy.
    I'm now back to English (and other LTR languages such as Chinese ... which is also legible RTL ... movie subtitles often used to be written RTL and some still are ... and, of course, top-to-bottom in columns starting at the right and working to the left).
    Anyway, I've been careful not to confuse myself even more by trying to grapple with the complexities of Australian English.
    SG

  • Embed table from Numbers 09 Document

    I am using both Pages and Numbers when working with a business plan document. The content of the document is being authored in Pages and the financial documents are being managed with Numbers.
    How can I integrate full page tables from Numbers into a Pages document?
    With iWork 08 I was copying and pasting dozens of tables into Pages and doing basic formatting to make the entire table visible. I needed to paste these tables in a textbox in order to rotate them to landscape.
    Is there an easier way to link these tables in iWork 09? I really like the linking of charts but I do not see any way to do the same for tables.
    Any ideas?

    Hello,
    I have the same problem as you have (business plan...). Very annoying indeed. I already wrote a "pages feedback" to Apple. Perhaps you could do that, too. The more people "complain" the better.
    The sad part is that we will probably have to wait for pages '10 to see that feature.
    Best regards

  • Split Excel tables into individual tables in Numbers

    Is there a way, having opened a file with multiple tables from excel, to make them into separate tables in Numbers. The tables have links between them and if I copy paste into a new sheet I lose the link. I no longer have access to Excel to put them all on separate Tabs. Thanks
    Reg

    Select a range of cells, press shift-command-X (mark for move), go to a cell in the new table and press shift-command-V (move).

Maybe you are looking for