Rename the attached workbook in bex broadcasting

Hi All,
We received workbook as attachedment after it is been broadcast.
however the name of the attached workbook comes as auto generated sequence numer.(e.g. "WORKBOOK_29BNO77P7UY7WOEFNEDS9CI2X")
is it possible to have date time and some other text as the name of attached workbook instead of auto generated sequence number.
Regards,

Hi Alnoor,
This will help you..
http://scn.sap.com/thread/328840
You may try this too:
1) Go to SE38 program RS_PREC_PLAN ( Precal TEST program). Enter the Technical id and the Variant (this is mandatory) for the workbook and execute by entering the emai id..You will receive the workbook as the attachment with the File name and not technical id..
2) The only issue here is the subject of the mail will always be TEST..
3) Create a copy of this program Z_RS_PREC_PLAN and have the Subject and date field in the Selection screen..You can make changes so that the date and the Text for the subject will be populated with the values you enter in the selection screen..
Regards,
Loed

Similar Messages

Rename the attachment

Hello:
How do we rename the attachement's that were scheduled to have the sysdate as the name of the attachment?
Thanks
Chandu,

Chandu,
You cannot set the file name of the attachment unless you delivery mechanism is: webdav, file or ftp.
Check the parameter mapping section of this link:
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T518230T518233.htm#enableburst
Cheers
Jorge
p.s. If this answers your question then please grant the points and close the thread

Problem in delevering an email to the recipent inbox using BEx Broadcaster.

Hi Gurus,
I was trying to send an e-mail with output format(HTML,PDF,EXCEL etc) using BEx Braodcaster wizard - Whenever I press execute in BI 7.0 BEx Broadcaster wizard after giving e-mail adress, contents, and subject the session is closing and it displays the message.. 'Started to send document Zxxx.hmt' .
But finally the recipent is not getting an e-mail in to his inbox. It shows the status as sent but no mail is delevered with the attachment. Receipent e-mial address is correct and sender settings in SU01 are (ex. E-mail adrress, username, and Communication method - E-mail ).
I dont understand why e-mails are not delivering to the recipent inbox. Could you please guide me in this regard with your inputs ?
Thanks a lot in advance.
Regards,
Sasi

Hi,
call transaction SCOT and see if you have error or in transit messages under the internet node;
You can start the send process manually from here and if it works (ask your basis if it doesn't)...
Please note that you need to schedule a job to be executed on regular basis to send the emails... (menu view / jobs)
hope this helps...
Olivier.

Rename the attachment of the Sender mail adapter

Hello Everyone,
i have Mail to file scenario. There is an attachment in mail and this file needs to be renamed and dropped in FTP server.
is it possible to read the attachment and then rename it .
How to achieve this solution because i could not find ASMA in sender mail adapter . so could not use Dynamic configuration.
Regards,
Ravi
Edited by: Ravi Maheshwari on Feb 16, 2012 1:50 PM

This blog could help you
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/6107

Bex broadcaster email notification

Hi,
I created a Z web template and included 4 analysis items linked to 4 views on a query.
When i schedule the Z template in Bex Broadcaster to send a PDF attachment as a email....
In the Subject line of email i am getting the web template technical name insted of the Description
How or where i can chage the setting so that
The subject line of email will show the description of Z template i scheduled
Thanksd

HI
Thanks for the update
Sorry i was bit confused...it was not in the SUBJECT line....
Currently the PDF attachment is being named as Technical Name of web template.
So the email which i recieved from broadcaster...Subject is what i defined during the schedule and the PDF Attachment is picking the web template technical name
Where and how can i change this name to the description of the query/template
I couldn't able to find out
Thanks in advance

Is there a way to have more than one Query view in the same workbook?

Is there a way to have more than one Query view in the same workbook?
BEx allows us to insert Queries into workbooks, but not saved views.
I can open a view in excel & then save it as a workbook....but after that there is no way to add another view to the same excel. If I open a new view, it opens in a new Excel.

Hi
when u open some query in BEx analyser,u can save it as a query view as well as workbook.The difference is, workbook is if u work with the design mode which will be in the left side of ur screen and query view is wen u save after drill downing some char or key figures from a intial screen wen u execute query in BEx analyser

Technical Name of the workbook Bex Broadcasting

Hello,
I have a workbook in Bex BW 7.0 which should be broadcasting to the managers via e-mail. Everything is ok except the name of the workbook. Workbook goes to e-mail address with its technical name instead of its description name. It's not because of the language differences problem. We checked it.
Looking forward for your replies.
Thank you very much.

Hi,
Please check if you have given the description of the workbook, in "Subject" (under "Texts" tab )
while maintaining the Settings for broadcast.
Hope this helps.
Thanks.
Ashmita

How we can change the tech.name of attached doc. recieved by broadcasting

Hi all,
After broadcasting the Workbook/report we are getting as attachment name with system defined name like u201C WORKBOOK_4DY3APLGXP0YJFBC251NOVDDFu201D by default in to the user inbox.
Can we control this attachment name to come with actual workbook/report name what we are broadcasted actually?
What ever we are giving in subject line & detail mail description in u201CText u201C tab of broadcast setting we are getting the same in subject & description of mail respectively. Itu2019s fine.
But the problem is that the attached broadcasted doc. name is coming with as different as I mentioned in below mail.
Please revert back if you have any inputs
Regards,
Chinna.

Hi,
As far as i know, SAP has not provided any option (program or tcode) to change/create techname of attached documents...Only option is we can give description ....
If any SDN er knows that, pls let us know that....
Regards,
Senthil

The role of Reporting agent once we have BEx Broadcaster

Hi all,
I understand the BEx broad caster does the pre calculation of Web template, distribution by various mechanisms...So in this context, how and when Reporting agents will be necessary ? Can any one give the differences between those two ??
best regs
D Bret

Dave,
For some time both will be needed. It is true that some things Reporting Agent did, send a report, BEx Broadcaster does better. But certain Reporting Agent features have not migrated yet. Here's how to think about it: If you want to run a query and store the data in a table for later use, you still need Reporting Agent. This covers priming the OLAP cache, Web template precalculation, pre-run Exceptions, etc.
If you want to present these query results, the means have moved to BEx Broadcaster. That's emailing a workbook, emailing a query result or a link, publishing in the Portal.
(Not) Coincidentally, the first set of features are mostly or exclusively ABAP-based and the second set is based on NetWeaver Java WAS.
Hope this helps,
Doug Childs

BEx Broadcaster - Using a Workbook with multiple queries on different tabs

Hi,
I was wondering if any has used Bex Broadcaster to broadcast a workbook that contains multiple queries on different tabs in the workbook. I believe someone has mentioned that this was an issue in the past and I was wondering if this now a possibility with Bex Broadcaster
If you were able to do this successfully, please let me know.
Thanks

Hello
Of course it is possible.
But, if you want to broadcast a workbook, you have to use a Precalculation Server.
Without precalculation server, workbooks cannot be precalculated and broadcasted.
More details, please check the note below:
1461398 BW 7.X(7.20) Precalculation - General Info. & Limitations
Best regards,
Edward John

Query on Bex Broadcasting to the PDA

Folks,
I have been trying to BEx broadcast a report to a PDA/smart phone.
I am unable to open the html attachment from the PDA.
Would appreciate if any folks have been able to BEx broadcast the mail as a worksheet (MS Excel)
Also, would also appreciate if folks have been able to open their HTML attachment in their PDA mail inbox without loss in format
Rgds

Can any one please help

Rename of Workbooks in BEx roles

Hello together,
how can I rename workbooks which are published/saved in BEx menu roles ?
I use BW 7.0
I tried to rename the workbooks in the role administration, but this changes have no influence of the view in the "Open Workbook" menu in BEx. And a change in the se16 table RSRWBINDEXT is not possible.
Thank you for your help in advance.

hello,
Try to go to the role in PFCG, reimport the menu under the Menu tab.
did u try in the open workbook menu if you could rename it.
did u try to log off from the sys and do a login again to BEX and check?
Regards,
Dhanya

How do you delete the email addresses in the BEx Broadcast wizard(send..F4)

Hi
In the BEx Broadcast wizard, you can enter email addresses manually or then you can see them on the drop down list(previously used email ids).
Question: you can create any email address and send to these but how do you delete those ones you have added? That means I dont want those email ids that display in the dropdown list or (F4) (can find next to the send column where we give recipent email id in the Broadcast wizrd).
Please help me in this regard.
Thanks,
Sasi

Hi Gurus,
Can you please tell me how to delete the e-mail ids that you can see when you click on a button beside recipient Email Address field?
Please give ur inputs.
Thanks,
Sasi

How to insert two queries in the same workbook in new BI 7.0 Bex web analy

Hi
Can you please advise how to insert multiple queries in the same workbook in BI 7.0 web analyser.
Sarah

Hi,
You need to switch to design mode (BEx Analyser Menu - Design Toolbar - Design Mode). For each query that you want to embed, insert an analysis grid item in the workbook. Link each analysis grid to its corresponding data provider (query).
Hope this helps.
Regards,
Rajkandula

Issue with the variable assignment in th Bex broadcaster

hi ,
i am working on Bex broadcaster . while creating a setting for a report, in the variable assignment under the General precalculation tab, the value given is not getting transferred.
i tried it in development portal its working fine.
do anyone have any ideas abt this.

Hi Apurva,
Find any solution for your problem? We are experiencing a similar issue too.
Thanks,
Vivek

Rename the attached workbook in bex broadcasting

Similar Messages

Maybe you are looking for