Rename the Catalog Link

Hi,
I want to rename the Catalog link on the header bar but i can't seem to find any documents on steps to do it.
Have come accross docs on renaming the other links 'Home', 'Dashboard' etc in http://obiee10grevisited.blogspot.co.uk/2012/02/obiee-11g-removing-dashboard-links.html
Anyone have steps on how to rename the Catalog link?
Regards

Hi,
Yes i had initially used a custom link to navigate to a specific folder within the Catalog which worked well.
I then wanted to hide the 'Catalog' link from the header which I did by revoking the 'Access Catalog UI' privilege under Administration->Manage Privileges but when i did that my custom link stopped working and gave me an access denied message.
I figured the only way to do this is to rename the default 'Catalog' link and grant the access to specific users.
Regards

Similar Messages

  • Can I shorten or rename the dedicated link to a web form?

    Can I shorten or rename the dedicated link to a web form?

    You cannot change the URL of a FormsCentral webform. However, you can embed our form in your web page and your web page can have whatever URL you want.
    Randy

  • LR 5.7 "encountered an error when reading from its preview cache". Happened the other day, I went to a day old backup and continued working. But now it happened again. LR renamed the catalog "Lightroom 5_ANDERS-OFFICE8_Mar-15-230042-2015_Conflict".

    I installed 5.7, ran ok for a while. Then it gave the error message that the preview cache was bad. A few times I have gotten this message and it restarts and repairs it. But now it couldn't. Renamed the Lightroom 5 catalog with the name "Lightroom 5_ANDERS-OFFICE8_Mar-15-230042-2015_Conflict". I got a backup and ran with that, and after a few days it happened again. It cannot repair and read the cache and shuts down.
    What should I do? I can probably go to a backup again, but I keep losing work. I now backup every day.
    But I need the system to be stable.
    This is Windows 8.1. Lots of RAM and disk space.

    The catalog isn't the problem, but rather that preview file. Use Windows Explorer or Finder (depending on your operating system) to browse to the folder that contains your catalog. Locate and delete the folder that has the extension .lrdata. Then you should be able to start Lightroom normally and it will begin generating a new cache file.

  • Rename the portal Help link in the portal

    I need to rename the help link in the portal masthead to some other name. Is there any option to change with out import the masthead par fil in to NWDS and hardcoding the  help link name.

    Hi Bris ,
    you can do that ...open the Default Framework
    Which is available at
    Navigate to Content admin–> Portal Content -> Portal User ->Standard Portal User
    Refer to this also
    MastHead Change & Portal Desktop
    Now open the masthead from tyhe framework https://weblogs.sdn.sap.com/weblogs/images/251750294/framework_laout.jpg , there in the properties you will find an entry called as help link , change it over there it works fine .I have tested that for any issues please let me know
    Thanx
    Pankaj

  • Catalog link opening the SRM Shop Page

    Hi SRM Gurus,
    We are experiencing an issue where a user selects the Catalog link in SRM Shop page and instead of Opening the Catalog page it opens SRM shop page. The problem does not occur every time.
    We are using SRM 4.0.
    The catalog call structure used is Standard Call Structure.
    We have also made following entry in the Catalog configuration:
    S. No. : 70
    Parameter Name : ~caller
    Parameter Value : CTLG
    Type: Fixed
    Please advise and help me on this.
    PS: Points will definitely be awarded accordingly.
    Regards,
    Ruchir Agarwal

    standard call structure is to open the external web service (eg catalog) in new window.
    But does not open new window for you.
    Use the same calling details in integrated call structure and test
    one more check point
    ask yr Basis to check entries in table TWPURLSVR
    this table is responcible to generate correct URLs for SRM web applications
    BR
    Dinesh

  • How to rename a View Link in a data model?

    In JDeveloper 9.0.3, I create a simple BC4J project with a master and a detail. The business components are properly created.
    When I try to design the data model for the module, I am able to link the view for the master and the view for the detail, there is no problem to rename the view objects that I select in my data model, but I found no way to rename the view links used between the view objects.
    I always get an automatically generated name, like "FkForeignDetailLink1". This is what I see in the data model, and also in the structure of the module, in the "View Link Members" section.
    I am able to modify the properties of this view link, but not its name. Am I missing something?
    TIA

    to clarify... In the AM wizard, you are trying to rename the instances of view objects and view links?
    If so, you are right, there is no way to rename view links on that panel. We are working on a better way to do that for the next release. The only way I know of to rename the view links is to shut jdev down and edit the XML for the application modele. This can be dangerous if you get it wrong, so make a backup before attempting this. The hint with renaming things OUTSIDE JDeveloper, I already know, but I don't like much.
    As for the AM wizard, I just noticed that I cannot do it inside. But that's no problem for me, as lots of details cannot be done inside the wizard, but there is a way to customize them afterwards. My real problem is that didn't find ANY way of doing it.
    A question for you if I may. Why are you renaming the view link instances? I though most users would use the detail view instance directly. The detail view instance would in turn look up the appropriate view link into, what ever its name was. The only place where I saw the bad view link names displayed in JDev was the Structure pane of the AM, under View Link Members. But there is no way to modify them there. As for the detail view instance, I didn't find a place to get to the view link at design time (in 9.0.3.988).
    Could you be more precise, please?
    Thanks again,
    Adrian

  • Using Windows 8 64 bit Premiere Elements 12 , motion tracker gives me the folloing error; The media file seems to have an invalid entry in the catalog, please rename it for use.

    I'm trying to put a graphic over an object, but I keep getting this error message; The media file seems to have an invalid entry in the catalog, please rename it for use.

    Lonesomeless
    Thanks for the reply.
    I checked the link that I posted back in post 3 of your thread. It is working with at least Firefox and Chrome.
    ATR Premiere Elements Troubleshooting: PE12: Motion Tracking/What To Use To Track Object?
    What browser are you using?
    The blog post contains significant information related to Premiere Elements 12 Motion Tracking. But, if you cannot access it for some reason, then we will need to troubleshoot via communications in the thread.
    SG has asked if you are able to create Motion Tracking effect using one of the graphics included with the program. We will watch for your response to him on that question. Please include in your message to him whether you can obtain your file to track the object using Organizer Tab or Project Assets routes as well as Graphics Tab.
    The following is an excerpt from the blog post referenced....
    SOLUTION
    Various tutorials and online comments have pointed to places other than Graphics Tab where objects can be selected and used to track the moving object in the video when the Motion Tracking workspace is opened in the Expert or Quick workspace.
    Organizer Tab, Expert or Quick workspace to access Elements Organizer 12. Cascade Windows and drag a video or photo from Elements Organizer into the yellow track box of Motion Tracking workspace.
    Project Assets, Expert workspace. Drag text, video, or photos from opened Project Assets into the yellow track box of Motion Tracking workspace.
    Graphics Tab, Expert or Quick workspace. Create a png file (graphic) or prtl file (text) and place it in Clip Arts in the Program Files of the program to have a permanent resource. Then from Graphics Tab, drag the newly created graphic or text object into yellow track box of Motion Tracking workspace.
    Thanks.
    ATR

  • Use of the 'Back' link in Catalog/Portal - Useful info for Catalog Admins

    Some info for anyone out there who may have noticed the small 'issue' with catalog items being duplicated when exiting a catalog using the Portal 'Back' link rather than the 'Return to Application/SRM' link.
    A problem has been identified there where portal navigation causes duplication of catalog data even where no item is selected in the catalog.
    The process might be:
    1. User accesses a catalog (any, SAP or External) and selects/adds to cart an item.
    2. User selects the 'Add Item' button in the 2nd step of the SC GAF, returning to the same catalog.
    3. User clicks on the Portal 'Back' link and is returned to the 2nd step of the Shopping Cart Guided Application Framework
    4. The initial shopped item is duplicated in the shopping cart even though no items were selected by the user.
    To ensure that this does not happen SAP have created note [1445078|https://service.sap.com/sap/support/notes/1445078] which provides the means to remove the 'Back' link thus negating the possibility of this issue occuring in the case of any catalog access.
    Please follow the steps provided in the note to modify the Portal Content and remove the back link entirely.

    Dear monique,
    The catalog no longer opens in a new window from SRM 7.0 as we now use Portal as UI or NWBC, in order to maintain session reliability the catalog frame is launched from within the Shopping Cart Guided Application Framework, this SC 'session' is then placed in ACTION SUSPEND, until the return from catalog is generated where the session is triggered to reopen with a RESUME command.
    If you wish to remove the portal navigation 'back' link, I believe you already have a note for doing so, if this has not worked, re-trace all the steps in case something was missed. It should work. By adding the bypassinb/outb_handler parameters into the call structure you should then have available the Return to SRM link instead in the catalog.
    You are also correct, use of teh integrated call structure in SPRO is no longer recommended, it is relevant for older UI technology like ITS.
    Regards,
    Jason

  • Linking Freight charges/installation charges in the catalog item

    Hi CCM/MDM experts,
    I have a requirement. Please look into it
    In the catalog can we have installation costs/freight costs attached to an item?
    When I select the item in the Shopping cart from catalog, it should bring cost of the item as well as additional cost under the pricing condition. The same thing should show up in PO.
    The labor cost is expected to hit a different GL account.
    Your help on this highly appreciated.
    Thanks

    Vemulap
    In our system we list Delivery Charges as a separate Catalog item with a zero price for each vendor, (or a fixed price if one exists).
    We allow our users to edit shopping cart items with a zero price but not those with a catalog price.  This is bespoke in our system using a BADI.
    We then direct the Freight charges to the correct GL account by linking to a UNSPSC code for freight.
    By this method users can enter the delivery charges themselves when creating the Cart. This leads to a separate line on the PO for Freight that must be confirmed.
    We tried to use pricing conditions but it gets horribly complicated and later on leads to problems with invoice entry if you have an organization with a large AP section as we have.
    Hope this helps
    Allen B.

  • Can I/How do I Rename the Folder Where All my Cataloged Images Reside

    I have migrated all my images from an old W7 system to a newer system, and successfully built a new PSE catalog on the new PC.  Now I would like to rename the folder where the images actually reside.  How can I do that, PSE-wise?
    I've found some options to move the PSE Catalog, but I don't think that's what I want - I want to move the media, and rebuild the catalog (and thus abandon ship on the old one).  Is that possible?

    You have to export copies, and you can specify the resolution in the export dialogue. But the easiest way to provide high-resolution copies for your client is to give them full-sized JPEG images. Changing the resolution number will have no impact on the quality or the resolution. If you want to send them low-resolution images, then resize them to something like 800 x 1200 pixels. Again, the number in the resolution box has no impact on the quality. But you will have to export the copies in two export operations because you can't export two different sizes at once. You don't have to wait for the one export process to finish before you start the other one.

  • Premier Elements 13 on MAC. trying to use motion tracking. immediately get error "the media file seems to have an invalid entry in the catalog. Please rename it for use."

    Anyone resolved this issue?  What is the "catalog".  All I did was import a file (1080/60) and get started.  Everything else seems to work fine.

    Assuming you're not shooting in 3D mode, I'm not sure why this is happening.
    As long as you're not shooting in 3D mode, this is a standard AVCHD camcorder, which I've done lots of motion tracking with.
    Since you manually copied the file from SD card rather than getting the media using Premiere Elements' tools, it is quite possible you grabbed the wrong file. Try this: Plug your camcorder (with SD card in the cam) into your computer via USB and set the camcorder to VTR/play. Then go to Premiere Elements' Add Media/From Flip or Camera and use that tool to get the video from the camera to your computer.
    This should resolve your invalid catalog entry issue.

  • The broken link error

    Hi,
    Please help me with this broken link error in Office Excel 2010. Thank you.
    The problem is: a broken link cannot be removed from the file. The link was used in data validation, which refers to a list of values. After the path was corrected, it still shows there’s a broken link. Here are the details:
    I have 4 files named “000TVA_Test – 3”, “000TVA_Test – 4”, “000TVA_Test – 5”, and “000TVA_Test – 6”. The posterior files were developed based on the previous files.
    In Test-3, sheet “Template “, cell “L4”, “O4”, “R4”… were built as dropdown list using data validation. The list source is in the “Library” worksheet. There’s no problem so far.
    Test-4 was firstly copied from Test-3. In this file I renamed the worksheet from “Library” to “Setting” and the link was broken from here. I can also fix the broken link in this file. (While I didn’t realize there was a broken link.)
    In Test-5 I fixed the path, but every time when opening the file, the broken link still shows.
    In Test-6 I’ve removed the data validations. The broken link is still there.
    I tried to find solutions online. I tried common methods, cannot find anything in the files is still using links. I also tried the “findlink.xla” add-in, but it only worked for Test-4, and couldn’t find the link in other files.
    Please help. Thank you!
    I uploaded files here: https://onedrive.live.com/redir?resid=1A97736E0ABBAA41!113&authkey=!AF5wAd9rwUPnYyE&ithint=folder%2cxlsm
    Thanks again!

    Hi,
    Based on my tested the files downloaded, I found that Test-5 & Test-6 included the "A defined name that refers to an external workbook", Test-4 had not. (Please click Formula Tab>Name Manage, you'll see them.)
    However, the Break Links command cannot break the following types of links:   
    A defined name that refers to an external workbook
    A ListBox control with an input range that refers to an external workbook.
    A DropDown control with an input range that refers to an external workbook.
    http://support2.microsoft.com/kb/291984/en-us (It also applies to Excel 2010)
    Thus, we'd better try the workaround: re-build the Test-5 & Test 6.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • How To Delete a User Folder from the Catalog?

    When logged into the Catalog Manager as the Administrator I am not allowed to delete individual user folders, even when the user has been deleted via the 'Manage Presentation Catalog Groups and Users' link in the front end. If the Administrator user cannot do this, who can? I also can't do it if I log into the Catalog Manager as the specific user (and I also can't change the permissions on that users folder, as that user!).
    Any ideas? Thanks.

    Your second option doesn't work for me. I've got no ability to drill into the individual user folders or change their permissions. The normal padlock button is not next to any of the user folders except the Administrator folder.
    I didn't have the ability to take OBI down so I could try using the Catalog Manager offline, so I deleted the user folders in the file system directly.

  • How to rename the search databases in sharepoint 2013

    Hi all,
    I have configure the search in sharepoint 2013 and 4 databases has been created in sqlserver.by default db are got created with GUID n sh i want change those DB names .
    could you pls help me how can i change the DB names.
    THanks
    Dhana
    sekhar

    Hi,
    Please check the below links,
    https://technet.microsoft.com/en-us/library/jj219654(v=office.15).aspx
    https://technet.microsoft.com/en-us/library/ff851878(v=office.15).aspx
    http://blogs.technet.com/b/meamcs/archive/2012/10/23/renaming-sharepoint-2010-search-service-database-name.aspx
    Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
    Mahesh

Maybe you are looking for

  • SharePoint Foundation 2013 - Search Configuration Issue - 2 App Servers and 2 Front-End Servers

    Hi,  We have a SharePoint Foundation 2013 with SP1 Environment.  In that, we have 2 Front-End Servers and 2 App Servers. In the Front-End Servers, the Search Service is stopped and is in Disabled state and in the 2 App Servers in One App Server, Sear

  • Adding photos from iphoto to ipod nano 6th generation

    I want to take photos from iphoto (mac os x 10.6.8) and put them on my ipod nano 6th generation.  I can't find anything on itunes that mentions photos and my ipod doesn't show up in iphoto or applications.

  • Integrate OLAP with OBIEE

    Hi, I'm trying to integrate OLAP with OBIEE, so in that process i'm using OLAP cubes created using AWM(Analytical Workspace Manager) in OBIEE. Using the cube, created the repository file as explained in the following link of Oracle site. http://www.o

  • Warranty of iphone?

    I BOUGHT IPHONE 6 PLUS FROM PAPITA TRADING LLC , DUBAI ON 12-OCT-2014. IS PHONE WARRANTY IS VALID IN INDIA.

  • ITunes 12 Volume

    After upgrade to OS-X and latest iTunes, my iTunes song volume is significantly reduced--even with system volume at maximum. Anyone having similar problems? Thanks.