Renamed a tab. But it's name is not showing in the link.

Hi,
I am using Apex 3.2 on Oracle 11g Enterprise Edition.
In an imported application, I renamed the name of a tab from 'Server' to 'Infra' (using the link: Home>Application Builder>Application 1000>Shared Components>Tabs>Edit Standard Tabs)
I can see the tab name is being changed to 'Infra'. No issues till here.
But when I click on this tab, on the top of the page I am still seeing as "Home > Server".
How can I change this to show as "Home > Infra" ?
Any suggestions would be very helpful.
Regards
Sharath

I got the answer. Edited the Breadcrumb.

Similar Messages

I want to install yosemite via external hd but my internal hd is not showing in the utilise disk

please help i think I'm stuck
Have been trying every way i know and found on internet to install os x yosemite on my macbook pro 2.4GHz the final method i tried is to install via external hd since my new hdd don't have recovery on it i boot in successfully with the external hdd but my internal hdd is not showing up so i can not install on it. pleas help.

It would be helpful if you indicated the EXACT model/year MBP that you have and the current OSX>
What is preventing you from installing Yosemite directly to the internal HDD?
Ciao.

Schema name is not showing in the Data load

Hi All,
I am trying to load a CSV file using oracle apex data load option. The options are using a new table and file upload(.csv). In the load data page, the schema name is not listing my current schema because of which i could not to upload the CSV file.
Can anyone please help on this ?
I am using oracle apex 4.1.1
Regards
Rajendrakumar.P

Raj,
Did you export this application from another workspace perhaps? I have seen in the past that if you create a data load page based on schema A and then import that application and set it to parse as schema B, it will not work.
The solution - although unsupported - is to simply alter the parse-as schema reference in the APEX export file. A more supported version would be to re-create the data load pages in the target application, so that it picks up on the proper parse-as schema.
Thanks,
- Scott -
http://spendolini.blogspot.com
http://www.enkitec.com

In my aperture the camera file name does not show under the photo how do I get it to show

In my aperature dislay the camera file number does not show how do I get it to show

Where exactly is the filename missing? Aperture has plenty of places to display metadata.
You configure and enable the display of metadata by defining Metadata presets. One place todo this is the little baggage label icon below the browser:
Press the icon,enable the display of metadata overlays for Browser and Viewer, then press "Edit" to customize the display of the tags you want to be displayed.
-- Léonie

When someone messages me their contact name does not show up as how i saved them!!! does this mean someone has access to my phone?

When I get a message from my friend, her contact name does not show up the way I saved her and I am wondering if someone has hacked my phone or something

That is what I am trying to work through. I understand you are seeing it in Notifications, that was what I was trying to confirm. When you open the message, what is displaying on the phone, Juan? Is Notification the only place that you are seeing this name differently? And yes, if you have the name saved as John, it should display as John. How are you backing up/syncing your contacts? Are you using a supported application on the computer, or are you using a cloud service, such as iCloud? If you go into your contacts and look in the upper left corner of the application, does it list more than one source for your contacts? Do you have more than one person with the same phone number listed in contacts, similar to having two people that work at the same place? Is the Notification only displaying a first name and no last name? Do you have first names only in your contacts?

I want all new windows to open in tabs but they dont, even after I have selected the option " Open new windows in new tab instead"

Al the details are in the question: I want all new windows to open in tabs but they dont, even after I have selected the option " Open new windows in new tab instead"

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Artist names do not show up on my idpod

When I sync my itunes to my ipod, some of the artist names do not show up in the Menu for artists. The music is on there, but the listing does not show.

There are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song is incorrectly marked as part of a compilation (and you have Compilations enabled on the iPod) or 2) the song has no album name associated with it.
if the tracks are ticked in the Get Info>Info tab as part of a compilation (as described in the link above), they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. If you are using iTunes 8, in the the multiple items info box the compilations setting is in the "Options" tab. Setting "Compilations" on your iPod main menu prevents you getting lots of single artist entries when you load an album by various artists.
Also if the tracks are missing an Album name in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances (for instance I read somewhere that if you have at least two tracks with different album names the rest will appear), however the simplest remedy is just add None or Miscellaneous to all the blanks in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod

CalDAV Server: Access to account "NAME" is not permitted. The server responded: "403" to operation CalDAVRemoveCalendarQueueableOperation.

I am running SL Server 10.6.8 and have a problem with only one iCal server account (mine). I am unable to delete a calendar that I created. I can rename it (was called "Home" and changed it to "Delete Me"). I can create new calendars and have one called "Home" and another called "Work" which I can also rename and delete without any problem. However, when I try to delete my original "Home" calendar, now called "Delete Me" it warns me that I will loose any appointments so I know iCal thinks there are events in the calendar otherwise it would not give that prompt. However, when I go to the year view and scan forward and back approx 20 years there are no events to be seen. I then confirm that I want to delete the account and then I get the following error with the option to "Ignore" or "Go Off-line"...
Access to account “NAME” is not permitted.
The server responded: “403” to operation CalDAVRemoveCalendarQueueableOperation.
If I ignore the calendar simply reapears and if I go off-line my calendar stops syncing and remains off-line until I try to take it back on-line at which time I get the above error again.
Any ideas how to fix this? I think it is because of this calendar I am unable to access my calendar via web as well. All other accounts on the server are able to but mine but going to eat this elephant one bite at a time and then resolve the ical web access afterwards.
Any help is greatly appreciated. Thank you.

Found solution!!!!
After trying to delete the calendar "family" multiple times and reading through some threads... I was able to figure out that the "Family" calendar that we can't seem to delete is corrected to FAMILY SHARING. Here is what I did:
Went on my iPhone 5S
1.Go to Settings
2. Scroll down to iCloud; and click on it
3.Click on "Family"
4. Click on your name at the top (has to be the organizer, i think)- I was the organizer so it worked
5.Stop Family Sharing
6. Stop Sharing
Now you can go to your calendar app and delete it! here is how in case you don't know
1. Click on Calendar app
2. Click on the word "Calendars" in middle of screen
3.Click on "Edit" at top left hand corner of screen
4. Scroll down to the calendar you want to delete and click on it
5. Scroll to the bottom of the screen and click "delete calendar"
DONE!!
If you are using your calendar on a mac like I was.... hence why it took sometime to figure this out. You have to stop family sharing from iPhone (if you can do it on the mac- more power to you, I didn't try figuring that out) and then you can go on your mac (if your connect to WI-Fi):
right click the calendar you want to delete,
select delete and it should go away!
yay!! hope this helps!!

I have downloaded new ringtones for my iphone but my itunes dashboard does not show ringtones on it , so i can't put them on my phone.

i have downloaded new ringtones for my iphone but my itunes dashboard does not show ringtones on it , so i can't put them on my phone.Am i doing something wrong.The ringtones were bought from i tunes.

Tones is the new name for Ringtones. If the entry is missing in the left-hand column of iTunes then enable it from Edit > Preferences > General tab.
If your existing tones are not syncing properly to your iOS device then uncheck the option to Sync Tones from the Tones tab when the device is connected, sync the device, check the option and sync again.
tt2

The name '' does not exist in the current context

I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
has also happened during normal debbuging of running code on my machine.
I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
My Settings/Configuration
Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
Projects are all set to Target Framework = .NET 4.5.1
Resharper 9.1 is installed
My active configuration is debug mode, Any CPU
My PC is 64bit and so is the O/S windows 8.1
All of my projects are also compiled and built in debug mode
For all my projects configuration debug has the Optimize Code check box unchecked
I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue.
What I have tried so far
I have tried debugging the unit test from Visual Studio Test Explorer instead of from Resharper with the same result.
If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
I clean solution with rebuild has no effect
Removing properties of the array also seems to work, example remove all initialization of property Value
Mark as answer or vote as helpful if you find it useful | Igor

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Oracle SQL Developer error - "The file-based source procedure Name is not present in the database."

I recently started working on the Oracle SQL developer. I have 'select' privileges on the QA schema and when tried to execute proc in QA. It is giving the error as 'The file-based source <procedure Name> is not present in the database. Was it compiled?'
instead 'you do not have sufficient privileges to execute this procedure'. Did research on internet but with no luck.What configuration changes needed to be done to make it work.Guide me.

Sounds like you do not have the correct privileges. What should have been granted to you by the QA user, or some other user with appropriate privileges, is...
grant EXECUTE on "QA"."<PROCEDURE_OF_INTEREST>" to "<YOUR_USERID>" ;
Note that a grant of execute on a procedure has nothing to do with grants of select on some or all of QA's tables and views.
So, as Vadim suggests, from your connection node in SQL Developer's Connections view, if you expand the Other Users node, then expand QA and look in the Procedures node, do you see the procedure of interest? If not, you cannot expect to be able to execute it from your userid's connection. And even if you do see it, you may have some other privilege that permits viewing but not executing, like...
The role SELECT_CATALOG_ROLE
The system privilege SELECT ANY DICTIONARY
And even if you do not see it there, then having certain other privileges granted to you could permit executing it in general, like...
The role EXECUTE_CATALOG_ROLE
The system privilege EXECUTE ANY PROCEDURE
Also, note that the 3.0 release is a bit dated nowadays. Upgrading to 4.0.3 production or even the 4.1 EA2 (early adopter) release will, in general, give you a better experience.
Best wishes,
Gary

My Iphone 5 updated to IOS 6.2 and now my contact names do not show on incomming calls or text messages. All i can see is the number of the person calling. how can i fix this?? please help

I updated my iphone software to IOS 6.2 yesterday and im not sure if it is a coincidence but now, my contact names do not show on incomming calls or messages. Also they do not show on past calls or recent history.
All my contacts in my phonebook still exist and are correct, the problem only occurs when receiving calls or messages. please help i need this fixing
Regards,
Frosty

Try to restore your iphone via iTunes or update to ios6.1.2.
If itunes gives an error with restoring (DFU/Recovery or just normal)
try this:
open your computer and search on windows; C://windows/system32/drivers/etc/hosts
open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
#74.208.10.249 gs.apple.com
this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
let me know if succeeded!

I Published a report on the report server but it's not showing in the internal application we use to access reports

Hi,
I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
[email protected] my cell phone number is 201-888-7952.
Thanks.

Hi Roger,
Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

File name does not showing the InDesign icon?

I have got few files from my client and they said it is an InDesign CS2 version file. but the file name does not showing the InDesign icon on the file name, though I have CS2 and I have tried other version too.
Also I could not open the file in any version.
Can somebody help me?

there is no screen shot...
You must either post a link to it on another server or embed it into a post using the camera icon on the web page like this:

The file name is not valid. The file name is a device or contains invalid characters.

Hi ,
I am getting below error in SSIS 2008 package when it is run through control-m
The file name is not valid. The file name is a device or contains invalid characters.
component "FF_SRC_InboundFidelityInputFile" (1) failed the pre-execute phase and returned error code 0xC020207E.
although this package is working fine in dev environment from visual studio.
control-m agent has proper permissions to the folder still it is failing. Please if anyone knows solution for this issue. I am working on this issue since more than a week but reached nowhere. Please help.
Thanks
Paras Gupta

Hi Paras,
Based on your description, it is not the VS IDE issue, if it is related to the SSIS, I suggest you post the issue in this forum here:http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices
, and there you would get better response.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Renamed a tab. But it's name is not showing in the link.

Similar Messages

Maybe you are looking for