Renamed meeting room not resolving and people can still book using old name.
I have renamed a meeting room ( using power shell) and restricted the resource in policy requests to a limited list as per an users request. The issue is that people can still book it, I'm told, using its old name including people not on the list of
resource in policy requests.
I can see that resource in EMC with the new name. When I go to outlook and setup a new meeting, I can type in the old name and it will resolve and underscore, but the new name does not. I have updated address lists using powershell and have downloaded the
offline address book using outlook. I still cannot get the new name to resolve.
Any thoughts?
Hi,
It should be OAB issue, restart the SA and MSFDS service and manually download the OAB again on the Outlook. It should be fine this time.
Thanks,
Simon Wu
TechNet Community Support
Similar Messages
-
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
My unlock bar does not scroll and I can't access/use my Iphone G3
I cannot unlock my iPhone in order to use it, the slide bar does not move, can someone then tell me what I should do?
ThanksTry a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????
You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.
-
Files Renamed when importing to LR4 and now can't find them in LR3
Help! What should I do???
Yesterday I installed LR 4 Beta. I had a folder with 300 images in it on LR 3, obviously all files had names. I imported these photos into LR4 to work with LR4 and they were renamed in the process. Now in my LR3 folder, all the files still have there old names and the "missing photo ?" and I assume that's because the name has been changed and LR3 can't find them. Any thoughts on an easy fix?
Thanks,
Matthew KrausThanks so much for helping me with this.
I must admit, I didn't pay too much attention when importing this "test"
group of photos to LR4, therein lies my problem. Now that I look at the
import settings that were used:
1. Files were not added or copied, they were "moved" to a new location and
also renamed.
2. Files were renamed starting with "264" using my regular import template.
Listed below are the first 10 photos with their original LR3 and he
changed LR4 names.
1201_001 changed to 1201_264-2
1201_002 changed to 1201_265-2
1201_003 changed to 1201_266-2
1201_004 changed to 1201_267-2
1201_005-Edit-Edit changed to 1201_268-2
1201_005-Edit changed to 1201_269-2
1201_005-Edit changed to 1201_270-2
1201_005-Edit-Edit-2 changed to 1201_271-2
I have a back up of my images on an EHD from several days ago which has the
original file names, but this backup only has 203 of the 268 images I
imported yesterday and are renamed.
Thanks again,
Matthew Kraus
2012/1/11 Dorin Nicolaescu-Musteață <[email protected]>
Re: Files Renamed when importing to LR4 and now can't find them in LR3 created by Dorin
Nicolaescu-Musteață <http://forums.adobe.com/people/dorin_nicolaescu> in *Photoshop
Lightroom* - View the full discussion<http://forums.adobe.com/message/4132062#4132062> -
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
my mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?
Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.
-
I have an iphone 4s. I have an alert that there is a software update available to iOS 6. When I got to the settings tab, the "download and install" button is not highlited and I can't click on it. Below that, it says that this update requires a Wi-Fi network connection to download. So I connected my phone to my computer and tried to update throug itunes. When I clicked the update tab on itunes on my laptop, an alert pops up that says I need to be connected to the internet for th update to take place. I am confused because I am connected to the internet, but for some reason the connection is not being recognized when I try to update.
I am using a Gateway laptop and my internet connection is a verizon 4g device that I plug into a USB port. I feel like this should be so simple but have not been able to figure it out even when I called Apple and spoke to a rep...help!In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi. -
My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
In Windows, display reads UNMOUNTABLE_BOOT_VOLUME and will not proceed and I can't get back to the OS 10 Mac side of my computer. Help!
buttercup7 wrote:
Wow, wonderful! I'm back on the OS X side of my computer and that's a good thing, THANK YOU!! My next question, if you can help, why did that happen the first place and what can I do to prevent it from happening again? I would be grateful for any insight you might offer.
I gave you the link to the Boot Camp documentation, read it carefully, mistakes in BC can have serious consequences.
If you have not yet backed up your Mac, DO IT NOW. -
I just signed up for a subscription to adobe reader paying EUR 24.40.
The program does not work, and I can not even go to my personal page .... help ...?Adobe Reader is free; it does not require a subscription.
Did you subscribe to an online service like ExportPDF, PDF Pack, ...?
What exactly does "not work" mean? -
Illustrator has not been responding for over a week, I can't open or force quit it. I've already uninstalled, reinstalled, and deleted the preferences folder, but the icon in my dock seems corrupt and is causing the program to not respond and I can't delete it.
Tamara,
Did you reinstall using the full three step way (otherwise strange things may linger)?
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Maybe you are looking for
-
Audigy 2 ZS Platinum Pro - External rack
Hi, I have a Creative Sound Blaster Audigy 2 ZS Platinum Pro. I would like to use the external rack. I wonder if it's possible... I searched on the net, but i couldn't find anything. Could someone help me? Thanks NexusNeminis Last edited by NexusNemi
-
Do I need to activate my Verizon iphone 5 before I use it in Europe?
do I need to activate my new unlocked Verizon iphone 5 before I take it to Europe? Do you know if there are any limitations on how many times/countries I can activate a gsm card? is LTE going to work as far as there is the right sim each time? Thank
-
ITunes store not loading with iOS 7 on iPhone 4S
iTunes store not loading with iOS 7 on iPhone 4S. I have tried reset network connections I have restored I have backuped I have erased all content I have rebooted I have DFUed. I have also the same issue with iTunes on pc, with -50 error. Is this an
-
Waiting for the results and when the results are available show them...
I have an input page, where the user gives an input. When the user submits this input page, the input is submitted to the server side component which does its processing (which is a time consuming process)....till the results are available i need to
-
Security.AccessControlException: access denied (properypermission...)
in my application i gor this type exception java.security.AccessControlException:access denied(java.util.PropertyPermission java.version read) what i have to add in my policy file