Renaming files in CS6

Is there a way to rename files in CS6 and still keep them in chronological order? I use Bridge to rename usually.

Hi -
Renaming Files and adding Templated Metadata to File on ingest are two of the new features in Prelude CC.  These features did not exist in Prelude CS6.  You can upgrade to the Creative Cloud Subscription for Prelude to get these plus many other great new features in Prelude.
Regards,
Michael

Similar Messages

  • Can't Open CC project file in CS6

    I edited my videos in Adobe Premiere Pro CC, but I can't open the CC project file in Adobe Premiere Pro CS6. The message says 'The project appears to be damaged, it cannot be opened.' Is there a way to convert the project so that it works for CS6?

    So how did you open it?
    I downloaded your file: "from-CC.prproj" (link in post 10).
    I duplicated the Project and renamed it: "from-CC_Version23_CS5".
    I opened the file in Dreamweaver, and changed '26' to '23', then saved:
    I opened the altered file "from-CC_Version23_CS5" in CS5.0.3.
    On opening in CS5.0.3, I got this error message:
    I clicked "OK".
    The Project opens asking for location of "Video-Frame-White-Test.jpg".
    I clicked "Offline".
    The Project opened, and Sequence Properties are [email protected]:
    I replaced your .jpg with a stock clip:
    I saved the file in CS5.0.3, then exited.
    Then I opened and renamed the saved file in CS6.0.5:
    note:
    I was unable to alter the 'Version Number" to from '26' to '25'
    and open the Project directly into CS6.0.5:

  • MD5 Checksum Changes When Renaming Files in Bridge?

    Just like the title says: MD5 checksum seems to be changing when renaming files in Bridge
    Is this normal? Is there anyway to disable this? Checksums do not seem to change when renaming a file outside of Bridge (ie; in Windows Explorer or Mac Finder).
    Ken
    P.S. System is Windows 7 using Bridge CS6 (64bit)

    Thanks for the quick reply Curt.
    Until you just now asked the question, I could not explain why it should not change. Now, if I understand correctly after googling around a bit, it appears the hash can be computed either with or without the filename (among other things).
    Apparently Bridge computes the hash including the filename. It seems there is an option to compute the hash based only on the file contents (ie; without the filename). My assumption was that by default, the checksum was generated using only the files contents (ie; without the filename).
    I'm hoping someone can comment definitively on how Adobe Bridge does it and whether or not there's a way to change it.
    Ken

  • Rename files or folders in Windows 8 not working

    Rename a file or folder on a Windows CE device is not working from Windows 8 when connected through Windows Mobile Device Center.
    From Windows 7 it worked just fine!
    This has been a problem for a very long time now, and im not alone according to all forums.
    But no fix as far as i can find!
    Is there anyone that have found a fix on this?

    http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-8-unable-to-rename-files-on-pocket-pc/abae21b7-7ee1-41c7-853e-1ac7ea5b0413
    It seems a issue in window 8.x system. Maybe you can ask for a MS support ticket. 

  • Sharepoint 2013 ItemAdded event receiver for renaming files is not working

    In SP 2013 I coded an event receiver that intercepts the ItemAdded event and it just renames the file.
    It is a synchronous event (I added <Synchronization>Synchronous</Synchronization> in the Elements.xml).
    This is the code:
            public override void ItemAdded(SPItemEventProperties properties)
                SPSecurity.RunWithElevatedPrivileges(delegate()
                    try
                        OutputDebugStringA("Inside ItemAdded");
                        string szHttpUrl = properties.WebUrl + "/" + properties.AfterUrl;
                        SPWeb openedWeb = properties.Web.Site.OpenWeb(properties.Web.ID);
                        SPFile spf = openedWeb.GetFile(szHttpUrl);
                        EventFiringEnabled = false;
                        string szUrl = properties.AfterUrl;
                        szUrl = szUrl + ".renamed";
                        string szNewFileName;
                        if (szUrl.LastIndexOf('\\') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('\\') + 1);
                        else if (szUrl.LastIndexOf('/') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('/') + 1);
                        else szNewFileName = szUrl;
                        if (properties.ListItem != null)
                            properties.ListItem["Title"] = szNewFileName;
                            properties.ListItem.Update();
                        spf.MoveTo(szUrl);
                        EventFiringEnabled = true;
                        base.ItemAdded(properties);
                        OutputDebugStringA("Renaming to " + szUrl);
                    catch (System.Exception exception)
                        OutputDebugStringA("ItemAdded ERROR: " + exception.ToString());
    The problem is that when I upload a .txt file using Internet Explorer, just after the renaming is done, IE says that something went wrong and when I inspect the log files I see:
    SPRequest.GetFileAndFolderProperties: UserPrincipalName=i:0).w|s-1-5-21-4050800873-4278272723-3073177257-500, AppPrincipalName= ,bstrUrl=http://sp2013/sites/demo/subsite1 ,bstrStartUrl=Shared Documents/test2.txt ,ListDocsFlags=16400 ,bThrowException=True 0fa7689c-674b-5045-c3a2-b214a5d4cbed
    01/09/2014 15:29:26.75  w3wp.exe (0x1544)                        0x16F4 SharePoint Foundation        
     General                        ai1wu Medium   System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>,
    StackTrace:    at Microsoft.SharePoint.SPWeb.GetFileOrFolderProperties(String strUrl, ListDocsFlags listDocsFlags, Boolean throwException, SPBasePermissions& permMask)     at Microsoft.SharePoint.SPFile.PropertiesCore(Boolean
    throwException)     at Microsoft.SharePoint.SPFile.get_Length()     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.OnSubmit(Object o, EventArgs e)     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadExPage.OnSubmit(Object
    o, EventArgs e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeSta... 0fa7689c-674b-5045-c3a2-b214a5d4cbed
    ...gesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
    context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    rootedObjectsPointer, IntPtr nativeRequestContex... 0fa7689c-674b-5045-c3a2-b214a5d4cbed
    ...t, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
    pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 
     0fa7689c-674b-5045-c3a2-b214a5d4cbed
    So it is clear that the fact that I renamed the file is causing an issue in the SharePoint upload logic.
    As a solution what I did was to not declare it as Synchronous, but if I do it then there is another error when Sharepoint shows the Edit Properties dialog... in this case the upload is OK but when it is time to show that Edit Property dialog IE fails and
    says that the file has been already modified, or that "something went wrong".
    If I use a synchronous event I get one problem. If I use the asynchronous event I get another problem... It's very frustating and I am pretty sure that a so important API like Event Receivers should have support renaming files so I hope someone can tell
    me what I am doing wrong.
    Thanks in advance

    May be you want to consider using the following code and see if it works for you.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/40c78e03-2dca-4083-89d2-a7430099da68/how-do-i-change-the-name-property-of-a-file-in-a-document-library?forum=sharepointdevelopment
    Amit

  • PSE10 still shows "edit in progress" even when file in CS6 is closed

    I have used PSE for years and love the Organiser to store and navigate round my photos. I've considered Lightroom, but have stuck with PSE10.
    I've got the trial of CS6 and am considering purchasing. I have a problem though. If I edit in CS6, do my adjustments, save the file then close it, it still shows up as edit in progress in my PSE10 photo well. This happens with whatever photos I edit in CS6. Very annoying as they are then locked. My only option is to close PSE10 where a warning comes up about changes being lost, re open it and all is well.
    Why does PSE10 think the photos are still being editied in CS6 even though they have been saved and closed?
    Help appreciated

    What I have tried is after closing the file in CS6, then opening the file in PSE editor and closing that trying to "trick" the organiser into thinking it has been closed, but no luck.
    I have no problem with PSE organiser and PSE editor. As soon as I close the file in the editor it becomes live again in the organiser. This is just with editing in CS6 then closing the file.
    After a heavy edit session I will have numerous "edit in progress" messages over my organiser with the only way of clearing to shut down and re open PSE.
    Annoying to say the least!
    Thanks for your thoughts

  • After Effects CC 2014 - Rendering / saving project file to CS6

    Hello all,
    I'm writing here to try to understand the st**** decision to exclude mp4 and mpeg from the render possibilities from After Effects CC 2014. I would gladly go back to CS6 but as of now I have more than 40 hours of edited video project in CC 2014, which of course cannot save project files to CS6, which is another brilliant move by somebody in Adobe that has the title position of "the dude for giving ideas to p*** people off". Now the problem is this, if I choose to export just a single clip from my composition of course I cannot export it to a container and codec of my choosing since it cannot be exported to Media Encoder, and has to be done in After Effects or I have to make a composition for each and every file, in order to export it to to the Media Encoder.
    Now I ask you good people any way to move my projects back to CS6, remove this unusable piece of software and be over with it, I simply don't have the time to be toying around with Adobe's new found glory for Apple and exporting stuff to QuickTime, taking 3 times longer than mpeg. Tried with OpenSeasame and by just exporting an XML file but none work so if there is any other way please let me know.
    Good thing I only got 1 month and didn't pay for the whole year...
    Cheers,
    shorto

    Did you use any of the new features in either AE CC (the original one) or CC 2014?  If yes, you're kinda stuck.
    If no, you'd have to engage in a two-step process: backsave the AE CC 2014 project to AE CC, then open the project in AE CC and backsave to CS6.

  • Saving a file in CS6 idiosyncracies

    Upgraded from CS4:
    If I open a previously worked tiff file in CS6, and make some changes, instead of being able to click Control-S as before, and have it just save, now it comes up as save as, and I have to click 3 time,s as it asks if I want to overwrite it and have the same compression. 
    And if I just modify and press alt-control-W - which would ask if I wanted to save and if I chose yes, it would just save it, now it would default to save a tiff as a psd instead.  Is this all necessary, all these extra steps?
    Also if I have a group of images open, that I may or may not modify, and use the alt-control-W to close all when done, with CS4 it would stop on the unmodified image and ask if I want to save it.  Now if there are unmodified ones, it asks this, but it doesn't stop to show that image, remaining instead on a different image, so I must look at the file name, which for me is usually just a number and name, that I do not have memorized for each similar image.  So I might choose yes close, thinking it is one I am done with when it really isn't.
    This is all such a step down in efficiency.  Is there some preference to go back to the more sensible way?

    In that case I can only recommend running the basic trouble-shooting procedures (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.) … though whether they will have any effect is beyond me.

  • I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

    I'm using CS6 Extended. My OS is "Windows 7 home premium.
    Can no longer load video files into CS6 for edited I keep getting error message:
    'Could not complete your request because the DynamicLink Media Server is not available.'
    Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

    Hi Mylenium,
    upfront:
    I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
    However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
    Now the real deal:
    I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
    The linked discussion is a lot younger, which is why I posted there first.
    I also put in information on the steps that I have tried and my computer specifications.
    I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

  • Get renamed file new name

    Hello all. What I'm wanting to do is rename a file and then do some things with the new file name.
    1. I want to view the new file name with the full path
    2. I want to output the new file name with the full path to a text file or csv file
    Here is what I have for outputting the renamed file into a text file, but it isn't working:
    cls
    $resultsfile = "C:\results3.txt"
    clear-content $resultsfile
    foreach($item in gc C:\RENAME.txt){
    Rename-Item $item "1.txt" | out-file $resultsfile -append
    notepad $resultsfile
    Any thoughts on how to work with the newly renamed file name?

    Yes, sorry I forgot to mention that I'm trying to delete a bunch of files whose names are too long. So what I 'm trying to do is to rename the files first with "1.txt" and then I'm going to delete them. I just had a "forehead-slap" moment where I realized
    I could just pipe the "rename-item" into "remove-item" and that should accomplish my goals.
    But, as for my original question, if I rename a file, how can i view/use the renamed file name? Like if I renamed a file, how could I output the newly renamed file name to a text file? I tried this in my original code above, but it didn't work. Let's just
    assume that I have a single file that I want to rename to "1.txt"

  • Rename file name & format using ftp sender

    Hi all,
    This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
    At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
    client format is  :  SAP_Order.txt (Pervious file name).
    We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
    How can i achieve this requirement?
    Can please suggests me solutions ASAP.
    Best Regards,
    satya,

    Hi,
       if your requirement is to pick the  existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
    then its simple...
    use two receivers instead of one , one for point to target and other for sender itself... (second receiver  is for  changing  the file name format....)
    Hope the above understanding is correct...if not provide more details of your requirement...
    HTH
    Rajesh

  • Deleting & renaming files - is there a shortcut to finder?

    I am a recent convert from PC to Mac. So far so good. However, one thing starts to drive me up the wall which is deleting/renaming files in programs such as photoshop, word, excel etc.etc.
    As far as I can tell, this is only possible in the finder menu. Is this Correct? I am using a lot of folders and subfolders - sometimes 3-4 levels deep. Every time I need to change/delete a file or filename - lets say while in photoshop, I have to go to finder and click my way through several levels of folders to the actual file I need to change. This is somewhat annoying and timeconsuming.
    Question 1: is there a way to do these operations in - lets say photoshop directly?
    Question 2: If not, is there a shortcut key that would point me automatically to the file in finder where I can make the changes?
    Your input would be very helpful and save me some aggravation.
    fupe

    Hi Greg,
    Thanks for your input. You are correct as far as "save" and "save as" is concerned. Windows and Mac work the same way.
    However, as far as I can tell, in Mac you can only "delete" or "rename" a file in "finder" which forces you to open up finder and locate the file in order to delete or change it.
    In windows you can do these 2 functions directly in the program (such as photoshop, excel or words). You do not have to go to "explorer or root directory" to make these changes which I believe would be the equivalent of "finder".
    In any case, Terence solved the problem. By command clicking the name (title) of the file in any program, it opens up the directory in "finder". This way makes it easy to select the file and do the changes.
    fupe

  • How to open renamed files?

    Hi
    I rename selected files and after that want to open them.
    For my purpose renaming works well like this:
    tell application "Finder"
    set FilesToRENAME to selection
    display dialog "Change what?" default answer ""
    set ChangeFROM to text returned of the result
    display dialog "Change to?" default answer ""
    set ChangeTO to text returned of the result
    set AppleScript's text item delimiters to {ChangeFROM}
    set theCount to count of FilesToRENAME
    repeat with x from 1 to theCount
    try
    set theName to name of item x of FilesToRENAME
    set FirstNamePart to first text item of theName
    set LastNamePart to second text item of theName
    set newName to FirstNamePart & ChangeTO & LastNamePart
    set name of item x of FilesToRENAME to newName
    on error errStr number theNumber
    activate
    display dialog "Error in changing the Name " & theNumber & return & errStr ¬
    & return & "Step " & x
    end try
    end repeat
    set AppleScript's text item delimiters to ""
    end tell
    Now newly renamed files don't belong anymore to FilesToRENAME. So how to point to those files now (how to make a new list from those renamed files)? I was thinking to get a path to each file inside the repeat loop and replace the name, but couldn't do it.
    Thank you for any help.
    Vera

    Pierre's method is pretty clever, but if you don't happen to be using a Finder selection (choose file for example), you can also use the interesting fact that an alias keeps track of an item even if it is moved or renamed.
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    font-weight: normal;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px; height: 340px;
    color: #000000;
    background-color: #DAFFB6;
    overflow: auto;"
    title="this text can be pasted into the Script Editor">
    -- tell application "Finder" to set filesToRename to selection as alias list
    set filesToRename to (choose file with multiple selections allowed)
    set changeFrom to text returned of (display dialog "Change what?" default answer "")
    set changeTo to text returned of (display dialog "Change to?" default answer "")
    set renamedFiles to {} -- this will be the renamed files
    repeat with aFile in filesToRename
    set aFile to the contents of aFile
    tell application "Finder" to set theName to name of aFile
    try
    set tempTID to AppleScript's text item delimiters
    set AppleScript's text item delimiters to {changeFrom}
    set firstNamePart to first text item of theName
    set lastNamePart to second text item of theName
    set AppleScript's text item delimiters to tempTID
    set newName to firstNamePart & changeTo & lastNamePart
    tell application "Finder"
    set name of aFile to newName -- aFile points to the original file
    update aFile -- give Finder a chance to catch up
    set the end of renamedFiles to aFile -- aFile now points to the renamed file
    end tell
    on error errStr number theNumber
    activate me
    display alert "Error " & theNumber & " in changing the Name" message errStr
    end try
    end repeat
    renamedFiles --> aliases to the renamed files
    </pre>

  • FM to rename   files in ABAP

    Hi..I am pretty new to the world of ABAP.
    I have the following task.
    I need to right a function module that will be responsible for renaming files on the R/3 system (to a certain predefined format). Basically, I am thinking that FM will import/accept an old file name (incl path) as a parameter, and then FM will take care of actually renaming the file and returning the name of the new filename.
    Since I am very new to all the ABAP, can any of you give me some pointers, or maybe some sample code if anybody done something similar?
    All the help is appreciated.
    thank you

    Are you talking about files on the application server.  If so, you will need to copy them into the new name and delete the old one.  Here is a sample program.
    report zrich_0001.
    parameters: d1 type localfile default '/usr/sap/TST/SYS/Data1.txt',
                d2 type localfile default '/usr/sap/TST/SYS/Data2.txt'.
    data: begin of itab occurs 0,
          rec(20) type c,
          end of itab.
    data: wa(20) type c.
    start-of-selection.
    * open and read file 1 into an internal table
      open dataset d1 for input in text mode.
      if sy-subrc = 0.
        do.
          read dataset d1 into wa.
          if sy-subrc <> 0.
            exit.
          endif.
          itab-rec = wa.
          append itab.
        enddo.
      endif.
      close dataset d1.
    * Open file 2 and copy the contents to this file
      open dataset d2 for output in text mode.
      loop at itab.
        transfer itab to d2.
      endloop.
      close dataset d2.
    * Delete file 1
      delete dataset d1.
    Welcome to SDN!  Please remember to award points for any helpful answers that you might recieve.  Also, when your question has been answered completly, be sure to mark as "Solved".  Thanks.
    Regards,
    Rich Heilman

  • Batch rename files preserving the original file name in metadata

    How can I batch rename files while preserving the original file name in metadata? (Don't want the old file name as part of the new file name)
    (Adobe CS Bridge can do this with some success, but I don't want to be dependant on this software. Results are inconsistent.)

    With a simple terminal script. More details needed, though.

Maybe you are looking for