Renaming form file and keeping references

Hi,
After upgrading from 11.5.8 to 11.5.9 I have an issue with one form.
I have the ARXTWMAI form which is referring to ARXTWLIN.fmb. I want to rename both forms to AR_TWMAI & AR_TWLIN respectively. When I do that and try to open AR_TWMAI in form builder(6i) it is looking for the ARXTWLIN fmb rather than the new, renamed AR_TWLIN.
Any ideas? Am i missing something here? How is the link between those fmbs created?
Thanks,

This does not sound like Oracle Forms, but I believe the answer is the same. I am using Oracle forms builder 6i Version 6.0.8.11.3 - Just mentioned in case it was relevant that we upgraded from Oracle Applications 11.5.8 to 11.5.9
If you rename files, then you also have to rename every occurance where that file name >appears. Open up the AR_TWMAI and look for any reference to ARXTWLIN fmb, then >manually change it to AR_TWLIN.I see what you mean, but I only want to rename the filename of the ARXTWLIN to AR_TWLIN...the $Header will remain ARXTWLIN. All the references that I see inside ARXTWMAI are to the ARXTWLIN header - that remains the same (for example ar_revision.form_revision('ARXTWLIN.fmb', $Revision: 115.43 );-
Just to make myself clear, in another similar situation I have 2 files. AR_RWMAI and AR_TWACC. The reference found inside AR_RWMAI is for ('ARXTWACC.fmb', $Revision: 115.43 ); although the file is AR_TWACC....
I hope I am not confusing you...If you think that by just renaming all the references even if the reference is to headers (which remain unchanged) will work then I'll give it a try!
Thanks,
Christos

Similar Messages

  • I want rsync only download new files and keep old files

    I install Arch i686 in home and in home I do not have internet connection , so at work I download all packages I need with this command
    rsync -avrt --bwlimit=58 rsync://mirror.datacenter.by/arch//extra/os/any/ /home/ddd/i686/
    and move them to home and then copy them to
    /var/cache/pacman/arch
    and install packages with pacman
    after two days , I run this command
    rsync -avrt --bwlimit=58 rsync://mirror.datacenter.by/arch//extra/os/any/ /home/ddd/i686/
    and I see rsync get last packages again and use many Bandwidth
    how I tell rsync only download new files and keep old files

    rsync manpage says the following:
    -u, --update                skip files that are newer on the receiver
          --inplace               update destination files in-place
          --append                append data onto shorter files
          --append-verify         --append w/old data in file checksum
    I guess you need to add -u flag.
    Reading manpages is the highest virtue in GNU/Linux.

  • How do I export a file and keep the aspect ratio intact?

    I'm exporting an edited scene from an external hard drive to a macbook but the video on the laptop is anamorphic (squished) compared to the original file on the hard drive.  How do I export the file and keep the aspect ratio intact?

    Please give the exact specs of your project. If the material is anamorphic, aspect ratio display is a function of the playback device. What is it?

  • Place Excel file and keep accurate formatting

    In my organization, InDesign is used for creating several rather comprehensive price lists (500 pages and more ...).
    Needless to say, each price list contains a lot of tables. Currently we
    create tables in Excel,
    save it as pdf file and
    place the pdf in InDesign
    Of course, that's cumbersome (no Edit Original command --> each modification in the original table restarts the above mentioned process) - that gives us a hard time dealing with hundreds of tables... 
    It would be ideal to place Excel files directly - but after hours of trial & error I'm still not able to insert a table AND keep the accurate Excel-formatting. There are always some smaller or bigger deviations (unexpected line breaks, overset content, wrong line-styles, colors etc.)
    What I did:
    Enabled "Create Links When Placing Text and Spreadsheet Files" in the File Handling Preferences
    Enabled "Import Options" when placing the Excel file
    Choosed "Formatted Table"
    It seems that some older xls files are more likely to raise problems. Newly-created xlsx files are fine most of the time (saving xls to xlsx doesn't make a difference though).
    What are your experiences on importing excel files? Thanks for any hint!
    Regards,
    Florian

    Thanks, Willi.
    The reason why we currently place our tables as PDF is, that we want to avoid any additional setup in InDesign. In fact we use InDesign "merely" to place & arrange all objects like tables, images, text etc. properly. There is no editing or formatting of content done in InDesign (Excel-spreadsheets are well-designed anyway) - I think otherwise our loads of price lists for different countries wouldn't be manageable at the moment ...
    I'm just looking for a way to keep the advantage of placing PDFs (retain accurate form) and eliminate the disadvantages (additional step of saving each spreadsheet as PDF and lack of the "Edit Original" option).
    Any ideas are appreciated!
    Florian

  • How to delete one kind of music file and keep another.

    Hello everyone, I'm new here and I hope you can help me. I have an iPod touch, and I am trying to add my music to it, but I only want the AAC versions on my iPod.  I've got some mp3 tracks in iTunes, and some AAC versions as well.  I have added the "kind" column, to order the files by their mp3 and AAC versions.  Now I want to delete the mp3 versions, and keep the AAC versions to add to my iPod.  Is there a way of highlighting the mp3 versions en masse, so I can select all the mp3 tracks in one go, ready to delete them?  I don't want to remove them from the computer itself; just from iTunes.  I could select each mp3 track in turn, and delete them individually, but that is a laborious way of doing the job.  I'm looking for an easier method.  Can anyone offer me a suggestion as to how to do this please, either via iTunes, or via a file management method in my Windows PC?  Thank you for your time in reading this question.

    It's OK, I sorted it myself.  I sorted the songs by "kind" as explained above.  Then I highlighted the first mp3 track, scrolled down to the last one, then pressed the shift key to highlight all the mp3 tracks.  Finally, I right clicked and chose "delete" from the options, which removed all the mp3 tracks in one go.

  • Is there any way to convert video files and keep my project in Final Cut Pro 7?

    I am currently editing a project, and have been having multiple issues with freezing while editing. Upon doing some quick research, I learned it is bcause my clips are in the h.264 format, which is not a good editing codec. Is there any way to change the codec of the videos and keep the project I have?

    You might need to relink the timeline to the new media. Just take the H.264 files offline, and reconnect to the new media. If you media managed the sequence, it'd relink. But then you are only converting the files used in the sequence, not all your media.

  • Adobe photoshop CS6.Receiving the error "could not complete your request because it is not a valid photoshop document? Tried renaming the files and had working psd files and now all psd files will not open and getting the error listed. Anyone help please?

    Could not complete your request because it is not a valid photoshop document. Tried renaming the file extensions and still no luck.

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • Renaming MXF files and pulling them out of their file structure

    My company's workflow necessitates that we pull mxf files out of the file structure and rename them. I know this is a big no-no, but with CalibratedMXF it is no problem.
    My proposed workflow was to use Prelude to locate the mxf files from where they are backed up on my drive, ingest them, copy them to a new location, and rename them.
    In attempting this process, however, I am realizing that Prelude will not pull mxf files out of their file structure. It copies the entire mxf folder structure to the new location, and renames the media only in Prelude (the clip name, not the filename).
    The only way to get Prelude to rename and discard with folder structure upon copy to new location is to check the 'Transcode' box and transcode the media.
    I want to work natively in mxf, I do not wish to transcode or rewrap.
    My workaround was to transcode the files to the exact same setting: MXF Op1a with preset 'Match Source (rewrap)'
    However this process simply forces Prelude to crash.
    Any suggestions on how I can batch copy and rename mxf files, instead of going through each level of folders for each clip and dragging the file out and manually renaming one by one?
    Prelude CC
    OS X 10.9.5
    3.5 GHz Intel Core i7
    files are C300 MXF Op1a MPEG-2

    Hi Kaye,
    Sorry if I missed this in your description of the problem, but what device is generating the MXF files you are attempting to rewrap? Also, when Prelude crashes, which it should not do obviously, does the crash reporter launch? If so, can you copy or attach the report into a reply?
    Thanks!
    Michael

  • Renaming a file and chaning the icon

    So I have a file:
    -rw-rw-rw-@ 1 doug staff 139880980 Aug 3 23:08 ItalianVacation2003.mov
    Sitting on another host that is shared via afp - it is a linux host.
    At the command prompt I can rename, copy, move, delete the file. In finder I can sometimes move the file, I cannot delete the file or rename it.
    As you can see from the shell I have permissions - everyone has read/write.
    In finder everyone has read/write privileges.
    After I copy the file to my home directory:
    -rw-r--r--@ 1 doug staff 139880980 Jan 15 12:36 ItalianVacation2003.mov
    In finder- I can see I have read/write.
    But I cannot, in finder, <Command>-, rename this file nor change any other attributes about it.
    I can in finder, delete the file - put it in the Trash and empty the trash.
    Anyone- what am I missing? Is there some other place the metadata is stored for this file? Is there some magic in the file itself? I checked ls -lO
    -rw-rw-rw-@ 1 doug staff - 139880980 Aug 3 23:08 ItalianVacation2003.mov
    thanks
    dn

    The relevant permissions for deleting or renaming a file are the permissions for the folder that contains the file.

  • Question from renaming a file and copy a file

    Hi
    Like I tell in subject I have a question about those 2 functions.
    Well I have a program that will copy files to an other directory for backup. Those files can have so to 1GB. Well I wrote a my code on using FileChannel and that takes some good time to copy it to the other place.
    But then I tried just for fun something different like renaming the file to that path. For example:
    Orignal File: file.db <-- +- 1GB same directory as the jar file
    to renamed file: ../../../test/file.db
    That goes very fast and I can open the file without lost of data.
    But what is the difference between both function because they do the same just that rename is much faster.
    Thx in adavance for your help

    But what is the difference between both function
    because they do the same just that rename is much
    faster.Copying a file involves copying all the data of the file from one physical location on the disk to another. That involves a good deal of IO.
    Renaming/moving a file is usually implemented on platforms in such a way that the data remains at the same location and file table entry is modified.

  • Save As - copies file and keeps original open

    When you perform a Save As in Dreamweaver CS5 it creates the new file but also keeps the old file open. I have found this to cause issues because I sometimes start editing the wrong file. In previous versions when you do a Save As the file you are working with simply becomes the new file. You don;t have two of the same file open. Is there a way to change the way this functions? I looked through the preferences and did not see anything that may relate to this...
    Thanks!

    No, there is no way to change it. This behaviour was introduced in Dreamweaver CS4 in response to feedback from many users.
    The idea is that you make changes to the original file, and then select Save As. The changes are saved in the new file that opens, and discarded in the old file.
    I have to admit that I still haven't got used to it even after a couple of years, but that's the way a lot of testers liked it. I find the best approach is to close the original file as soon as the new one opens.

  • Editing/renaming mp3 files and folders on my Zen Micro with Win Media Player

    Can anyone tell me how I edit and rename the files all ready on my Zen Micro? For instance: I have 3 folders named "2Pac", "2 Pac" and "Tupac" and would like to put them all together under one name.
    I also want to get rid of the album subfolders. I have changed the files in the Library, renaming files and folders, deleting all album names, but the changes don't seem to be made on the player.
    I can't seem to change them directly changing folders and renaming files on the right side of the Media Player Screen either. Only option there is to delete files.
    Bepppe

    Thanks for the tip Baldbear, that should work.
    So I guess it is no way of editing the files when they are all ready on the player.
    Is it then impossible to get rid of the album subfolders? (without deleting all files an transfer them back on again. I would have done it if it weren't for the fact that the sync stops for no reason every 5th to 30th file I transfer.

  • How do I read a txt file and keep only IP addresses based on the first 2 or 3 octets of the IP?

    Hello,
    I have a text file and each line contains random text followed by an IP address as follows.
    some text....172.30.25.30
    some text.....172.30.85.10
    some text..172.30.25.35
    some text.......172.30.85.11
    some text....172.30.15.1
    some text...172.30.15.2
    some text.......172.10.1.1
    some text...172.20.4.2
    some text..172.10.1.2
    some text.....172.20.5.1
    I'd like to create an output file which has only one entry for each unique entry in the file where either the first 2 or 3 octets are unique as follows:
    Output File
    172.30.25
    172.30.85
    172.30.15
    172.10.1
    172.20
    Any suggestions are appreciated!
    Thanks for your help! SdeDot

    Thanks mjolinor.  Works great!
    Two questions.
    1. Could you plz suggest how this could be modified so this code would read the file in or accept it from the pipeline instead of wrapping the (@' around the data?
    2. Could you plz briefly describe some of the details of the code so I can further research and understand.
    Thanks for your help.
    Thanks for your help! SdeDot
    1. It already reads in the file.  The (@' .. '@) bits are just there to create a file using your test data to demonstrate that it works.
    2.  Not user what kind of "details" you want.  There really isn't much there, and get-help on the cmdlets used should provide information on what's going on with them in that script.
    [string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

  • Easy way to rename all files and folders in a specific directory

    hy all,
    i want to rename all files&folders in a specified folder... i only want to replace all "_'_" with an"-" in all file names...
    example:
    TCHK1_B4194W01PF7_NMOSi_D_B__3_50ohm-500ohm_03-29-07_10'46'23_AM.tst
    TCHK1_B4194W01PF7_NMOSi_D_B__3_50ohm-500ohm_03-29-07_10-46-23_AM.tst
    i cant change the timeformat because this are automatically generated files from an external program...
    this is my program(attached as JPG) but it doesnt work...i get allways "error 10-duplicate path" or "error1 -   An input parameter is invalid"
    could sombody please help me... i think its an easy VI but i cant get it working
    THANKS in advance!!!!
    greets
    Andreas
    Attachments:
    renamefolder.JPG ‏20 KB

    Well, the one problem you have is that for the "Move" function, the source file input should be wired to the output of the "Build Path" function, not to the duplicate path out of the "List" function. Also, you need to pass the error cluster around with a shift register. Otherwise you will not catch an error that may have occurred during one of the file rename operations.

  • I can't open Adobe files and keep getting this message: "Adobe failed to connect to the DDE server" - anyone got a fix for this? I'm Windows 7, 64bit running Office 2010 Pro Plus - anyone got a fix for this?

    Forgot to mention I'm using Firefox V.4

    Hey Jorge,
    I've checked Reader, and there are no updates. I've run a Windows version compatibility test - although it only goes up to Vista, and not Windows 7.
    Anyway, it appears I can now open Adobe files - but I've found another issue: when I right-click on a file and scroll down to the 'send to email recipient', it doesn't automatically open an Outlook email with the file as an attachment - in fact it doesn't open Outlook at all, let alone automatically?
    Any clues?

Maybe you are looking for

  • Sync iPod color after computer crash and loss of music

    How do I sync my older iPod color now with a new windows vista computer and not lose the music already on the iPod? the older hard disc crashed and was not recoverable so all of the downloaded music over 2000 songs were lost but are still on the iPod

  • Custom error messages when booking traing in SAP LSO

    In SAP LSO i implemented the BADI IF_EX_LSO_CHECK_BOOKING~CHECK_BOOKING in the code i throw error message in the object ct_message_tab  of type DCMESSAGE. When the error is presented within the portal two things are not the way i want it. 1. The erro

  • I want to downgrade it to 6

    Hi I have a serious problem with my i phone 4s .i have upgrade my version to 7.0.2. And I want to downgrade it to 6

  • IMac + iPad 2 or MacBook Pro for computer science students

    Hi there, I would be joining college this September and as usual I am looking for a new computer. I would be majoring in Computer Science and hence would be doing a lot of programming and that kind of stuff. I don't like taking a computer to my class

  • How to delete atomically unread messages Mail Maverick?

    I received a ton of emails and I will like to know step by step if is a way to delete unread messages completly for good in automatic way if let say I haven't read the email in 3 days?..... thanks in advance.