Renaming multiple items!

Hi!
I just recently switched to mac and i cant for the life of me figure out how to rename multiple items. i can rename singular items, but when working with photos i want to be able to rename by the name of the folder after uploading and sorting.
is there some trick i am missing?
(ps. i have searched discussions, and mac help to no avail)
much thanks.
macbook pro Mac OS X (10.4.10)

thank you for these suggestions. i tried one of the apps listed at mac update but found it just too complicated. I did not try the second reply suggestion, but it looked ok.
For anyone else looking for a SIMPLE QUICK way to rename, I jsut created an automated action with the Automaker. it takes less than a few seconds and will simply rename and add sequences. (though i cant figure out why apple just didn't make this as a preset)
the more i learn to use it, i find the automater AMAZING.
but still thank you all for your suggestions.

Similar Messages

Quickest way to rename multiple items

Hi I'm looking for the quickest way to rename multiple items in a folder.
Thank you for helping

molo wrote:
Hi can you tell me how to set the automator service for renaming, thank you.
start automator. it will give you a pulldown scrren where you choose what kind of workflow to make.choose "Service". at the top set it to receive files or folders and be available in Finder. add just one acton to the workflow
1. rename finder items.
at the bottom of the action click on "options" and check the box "show this action when the workflow runs". save the workflow. it will now be available in the right-click menu in finder.

Batch Rename Multiple files with different names

Hi,
Is there any way to batch rename multiple files with individual names? I.e
IMG_123 changed to RSP45AS
IMG_124 changed to MOL157A
IMG_125 changed to AGKH135
IMG_126 changed to MNOLH13
IMG_127 changed to ASFBLUG
Etc.
Are they any programs or scripts or plug ins that would do that job?
Thanks

HI there Onemorewave,
It looks like there is a batch remname feature included in OS X 10.10 Yosimte if you are planing on updating.
Rename files, folders, and disks - Mac Help
Rename multiple items
Select the items, then Control-click one of them.
In the shortcut menu, select Rename Items.
In the pop-up menu below Rename Folder Items, choose to replace text in the names, add text to the names, or change the name format.
Replace text: Enter the text you want to remove in the Find field, then enter the text you want to add in the “Replace with” field.
Add text: Enter the text to you want to add in the field, then choose to add the text before or after the current name.
Format: Choose a name format for the files, then choose to put the index, counter, or date before or after the name. Enter a name in the Custom Format field, then enter the number you want to start with.
Click Rename.
Note: To batch rename, you would want to choose the "Format" option.
-Griff W

Renaming multiple files using automator.

hello. i am renaming multiple files using automator. now when i import the images they are in sequential order like dscn001, dscn002 etc... i want to rename it to 001 my pic, 002 my pic, etc...
i am choosing the sequential renaming option. after importing the pics to automator i see to it that i sort them by name so that the new names i provide are in the order of the actual file names ie. 001mypic = dscn001, 002mypic = dscn002, etc..
however, it seems that inspite of sorting then my name they are being renamed randomly. what should i do. this is distrubing the cronological order of the pics.
thanks in advance
Neerav

Well, whenever I rename in sequential order (presorted or otherwise), that is exactly what happens, so I am not sure what is causing your particular problem. If you look at the results of sorting before the rename, you should see that the items are renamed in that order - although the way that they are sorted after the rename may be different. You can easily see this sorting by just adding a prefix/suffix and looking at the differences in how the lists are sorted (sorting by name (numerically) may give you different results). Check out this Apple document to see if this is what is happening.

MULTIPLE ITEM PROBLEM IN VL31N BDC

hI FRIENDS ,
    I AM POSTING A BDC OF TRANSACTION VL31N ,ie FOR SCHEDULE AGREEMENT INBOUND DELIVERY.I CREATE A FUNCTIONAL MODULE OF THE SAME AND CALL IT FROM AN ASP PAGE,IN THAT THERE IS PO NUMBER 5500000986 WHICH HAS TWO ITEMES 62 AND 95 RESPECTIVLY OF SAME MATARIAL NUMBER R010230123041002 AND DIE NUMBER 2304P,NOW THE PROBLEM IS THIS BDC IS WORKING WHEN THERE IS ONLY ONE ITEM BUT GIVES AN ERROR "CANT CREAT INBOUND DELIVERY FOR PO NO ...' WNEN IT HAS MULTIPLE ITEM.WHAT SHOULD I DO ? I ALSO USED LOOP BUT IT ALSO DOSENT WORK AS IT WILL ADD ALL OPEN QTY OF PO 986 AND UPDATE AGAINST ITEM NO 95.
CODE IS AS FOLLOWS:.........
FUNCTION y_synie_bdcinbdly.
""Local interface:
*" IMPORTING
*"     VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*"     VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*"     VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*"     VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*"     VALUE(USER) LIKE APQI-USERID OPTIONAL
*"     VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*"     VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*"     VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*"     VALUE(EXTNID) LIKE MAKT-MAKTG
*"     VALUE(VENDORNO) LIKE LFA1-LIFNR
*"     VALUE(PONUMBER) LIKE EKKO-EBELN
*"     VALUE(ITEMNUMBER) LIKE LIPS-VGPOS
*"     VALUE(MATERIAL) LIKE MAKT-MAKTG
*"     VALUE(DLYQTY) LIKE LIPS-LFIMG
*"     VALUE(BTCHNO) LIKE LIPS-CHARG
*"     VALUE(POSLR) LIKE EKES-EBELP OPTIONAL
*" EXPORTING
*"     VALUE(SUBRC) LIKE SYST-SUBRC
*"     VALUE(INDELYNO) LIKE SY-MSGV2
*"     VALUE(MSG1) LIKE SY-MSGV1
*"     VALUE(MSG2) LIKE SY-MSGV2
*"     VALUE(MSG3) LIKE SY-MSGV3
*"     VALUE(MSG4) LIKE SY-MSGV4
*" TABLES
*"      MESSTAB STRUCTURE BDCMSGCOLL
*"      ERRTAB STRUCTURE YSYNERRMSGS
*"      INDLYTAB STRUCTURE YSYN_QTYTAB
Updated by ANAND SYNISE 19.1.2007
DATA: BEGIN OF bdctab OCCURS 0.
          INCLUDE STRUCTURE bdcdata.
DATA: END OF bdctab.
DATA: datenow(10) TYPE c,
        fldvar(30) TYPE c,
        fldno       TYPE i,
        flditoc(6) TYPE c,
        qty(13)     TYPE c.
DATA maxposnr LIKE lips-posnr.
DATA testposnr TYPE posnr.
DATA itemnoint TYPE i.
CONCATENATE sy-datum6(2) '.' sy-datum4(2) '.' sy-datum+0(4) INTO datenow.
CLEAR bdctab.
REFRESH bdctab.
PERFORM open_group      USING group user keep holddate ctu.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '4007'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'RV50A-VERUR_LA'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '/00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-LIFNR'.
     bdctab-fval = vendorno.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LV50C-BSTNR'.
     bdctab-fval = ponumber.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-VERUR_LA'.
     bdctab-fval = extnid.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=MKAL_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIKP-BLDAT'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=POPO_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-POSNR(01)'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '0111'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'RV50A-PO_MATNR'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = 'WEIT'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-PO_MATNR'.
     bdctab-fval = material.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=POLO_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-POSNR(01)'.
     APPEND bdctab.
*ADDED BY ANAND ON 22-01-2007
       CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = ITEMNUMBER .     "ITEMNUMBER = LIPS-VGPOS
     APPEND bdctab.
************ENDED***********************
ADDED BY MILIND 19.01.2007
       CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = poslr .
     APPEND bdctab.
*    ENDED * *
   CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LIPS_SELKZ(01)'.
     bdctab-fval = ''.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '/00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-CHARG(01)'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
      QTY = INDLYTAB-DLYQTY.
        qty = dlyqty.
     bdctab-fnam = 'LIPSD-G_LFIMG(01)'.
     bdctab-fval = QTY.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIPS-CHARG(01)'.
*     BDCTAB-FVAL = INDLYTAB-BTCHNO.
     bdctab-fval = btchno.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=SICH_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-MATNR(02)'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
CALL TRANSACTION 'VL31N' USING bdctab MODE 'N' MESSAGES INTO messtab.
subrc = sy-subrc.
PERFORM close_group USING     ctu.
CLEAR bdctab.
REFRESH bdctab.
IF sy-subrc EQ 0.
    indelyno = sy-msgv2.
ENDIF.
LOOP AT messtab.
    MOVE: messtab-msgid TO errtab-msgid,
          messtab-msgnr TO errtab-msgnr,
          messtab-msgv1 TO errtab-msg1,
          messtab-msgv2 TO errtab-msg2,
          messtab-msgv3 TO errtab-msg3,
          messtab-msgv4 TO errtab-msg4.
    APPEND ERRtab.
ENDLOOP.
LOOP AT errtab.
    SELECT SINGLE text FROM t100
      INTO errtab-errmsg
      WHERE msgnr EQ errtab-msgnr AND arbgb EQ errtab-msgid
      AND sprsl EQ sy-langu.
    MODIFY errtab.
ENDLOOP.
ENDFUNCTION.

Hi,
Check this code:
REPORT Z_CUSTOMER_UPLOAD .
              D A T A         D E C L A R A T I O N S                *
DATA:BEGIN OF IT_CUSTOMER OCCURS 0,
     KUNNR LIKE MV10A-KUNNR,
     VKORG LIKE MV10A-VKORG,
     VTWEG LIKE MV10A-VTWEG,
     MATNR LIKE MV10A-MATNR,
     KDMAT LIKE MV10A-KDMAT,
     MEGRU LIKE MV10A-MEGRU,
     SELKZ TYPE C value 'X',
     LPRIO LIKE MV10A-LPRIO,
     ANTLF LIKE MV10A-ANTLF,
     END OF IT_CUSTOMER.
DATA:BEGIN OF IT_success OCCURS 0,
     KUNNR LIKE MV10A-KUNNR,
     VKORG LIKE MV10A-VKORG,
     VTWEG LIKE MV10A-VTWEG,
     MATNR LIKE MV10A-MATNR,
     KDMAT LIKE MV10A-KDMAT,
     MEGRU LIKE MV10A-MEGRU,
     SELKZ TYPE C value 'X',
     LPRIO LIKE MV10A-LPRIO,
     ANTLF LIKE MV10A-ANTLF,
     END OF IT_success.
DATA:BEGIN OF IT_error OCCURS 0,
     KUNNR LIKE MV10A-KUNNR,
     VKORG LIKE MV10A-VKORG,
     VTWEG LIKE MV10A-VTWEG,
     MATNR LIKE MV10A-MATNR,
     KDMAT LIKE MV10A-KDMAT,
     MEGRU LIKE MV10A-MEGRU,
     SELKZ TYPE C value 'X',
     LPRIO LIKE MV10A-LPRIO,
     ANTLF LIKE MV10A-ANTLF,
     END OF IT_error.
DATA: L_INDEX TYPE SY-TABIX.
DATA:IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
ERROR MESSAGE TABLE
DATA:IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : C_S TYPE C VALUE 'S',
        C_E TYPE C VALUE 'E'.
*DATA: IT_SUCCESS LIKE IT_CUSTOMER OCCURS 0,
     IT_ERROR LIKE IT_CUSTOMER OCCURS 0.
DATA : V_RECTOT TYPE I,
        V_RECERR TYPE I,
        V_RECSUC TYPE I.
              S E L E C T I O N - S C R E E N                      *
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER        : P_FILE LIKE RLGRAP-FILENAME .
SELECTION-SCREEN : END OF BLOCK B1.
           A T S E L E C T I O N - S C R E E N                    *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
to get F4 help for p_file
PERFORM F4_FILENAME USING P_FILE.
            S T A R T   O F   S E L E C T I O N                      *
START-OF-SELECTION.
Uploading data from flat file into it_tab
PERFORM BDC_UPLOAD USING P_FILE.
PERFORM PROCESS_DATA.
PERFORM POPULATE_BDC.
            E N D O F   S E L E C T I O N                           *
*END-OF-SELECTION.
PERFORM DISPLAY_REPORT.
*&      Form F4_FILENAME
      text
     -->P_P_FILE text
FORM F4_FILENAME USING    P_P_FILE.
DATA:L_FILE TYPE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
IMPORTING
   FILE_NAME           = L_FILE .
   P_P_FILE = L_FILE.
ENDFORM.                    " F4_FILENAME
*&      Form BDC_UPLOAD
      text
     -->P_P_FILE text
FORM BDC_UPLOAD USING    P_P_FILE.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = P_P_FILE
    I_BEGIN_COL                   = 1
    I_BEGIN_ROW                   = 1
    I_END_COL                     = 8
    I_END_ROW                     = 1000
TABLES
    INTERN                        = IT_DATA
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " BDC_UPLOAD
*&      Form PROCESS_DATA
      text
--> p1        text
<-- p2        text
FORM PROCESS_DATA.
SORT IT_DATA BY ROW COL.
LOOP AT IT_DATA.
CASE IT_DATA-COL.
WHEN 1.
IT_CUSTOMER-KUNNR   = IT_DATA-VALUE.
WHEN 2.
IT_CUSTOMER-VKORG   = IT_DATA-VALUE.
WHEN 3.
IT_CUSTOMER-VTWEG   = IT_DATA-VALUE.
WHEN 4.
IT_CUSTOMER-MATNR   = IT_DATA-VALUE.
WHEN 5.
IT_CUSTOMER-KDMAT   = IT_DATA-VALUE.
WHEN 6.
IT_CUSTOMER-MEGRU   = IT_DATA-VALUE.
WHEN 7.
IT_CUSTOMER-LPRIO   = IT_DATA-VALUE.
WHEN 8.
IT_CUSTOMER-ANTLF   = IT_DATA-VALUE.
APPEND IT_CUSTOMER.
    ENDCASE.
ENDLOOP.
ENDFORM.                    " PROCESS_DATA
*&      Form POPULATE_BDC
      text
--> p1        text
<-- p2        text
FORM POPULATE_BDC.
DATA:L_COUNTER TYPE N,
         L_STRING TYPE STRING.
LOOP AT IT_CUSTOMER.
AT NEW KUNNR.
CLEAR L_COUNTER.
      L_INDEX = SY-TABIX.
      READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_dynpro      using 'SAPMV10A' '0100'.
perform bdc_field       using 'MV10A-KUNNR'
                              IT_CUSTOMER-KUNNR.
perform bdc_field       using 'MV10A-VKORG'
                              IT_CUSTOMER-VKORG.
perform bdc_field       using 'MV10A-VTWEG'
                              IT_CUSTOMER-VTWEG.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
ENDAT.
L_COUNTER = L_COUNTER + 1.
    CLEAR L_STRING.
perform bdc_dynpro      using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-MATNR(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using L_STRING
                        IT_CUSTOMER-MATNR.
CONCATENATE 'MV10A-KDMAT(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using     L_STRING
                                 IT_CUSTOMER-KDMAT.
CONCATENATE 'MV10A-MEGRU(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using   L_STRING
                                IT_CUSTOMER-MEGRU.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
*-- For Page down in Call Transaction Mode
    IF L_COUNTER = 14.
      CLEAR L_COUNTER.
      PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                            '=P+'.
    ENDIF.
perform bdc_dynpro      using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-SELKZ(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using L_STRING
                          IT_CUSTOMER-SELKZ.
perform bdc_field       using 'BDC_OKCODE'
                              '=SELE'.
perform bdc_dynpro      using 'SAPMV10A' '0300'.
perform bdc_field       using 'MV10A-KDMAT'
                              IT_CUSTOMER-KDMAT.
perform bdc_field       using 'MV10A-LPRIO'
                              IT_CUSTOMER-LPRIO.
perform bdc_field       using 'MV10A-ANTLF'
                              IT_CUSTOMER-ANTLF.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/EBACK'.
at end of kunnr.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
CALL TRANSACTION 'VD51' USING IT_BDC MODE 'A' UPDATE 'S'
      MESSAGES INTO IT_MESSAGES.
      CLEAR IT_BDC.
      REFRESH IT_BDC.
ENDAT.
IF NOT IT_MESSAGES[] IS INITIAL.
    PERFORM FORMAT_MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM.                    " POPULATE_BDC
*&      Form bdc_dynpro
      text
     -->P_0273   text
     -->P_0274   text
FORM bdc_dynpro USING    VALUE(P_0273)
                         VALUE(P_0274).
IT_BDC-PROGRAM = P_0273.
IT_BDC-DYNPRO = P_0274.
IT_BDC-DYNBEGIN = 'X'.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM.                    " bdc_dynpro
*&      Form bdc_field
      text
     -->P_0278   text
     -->P_RECORD_KUNNR_001 text
FORM bdc_field USING    VALUE(P_0278)
                       VALUE(P_0279).
IT_BDC-FNAM = P_0278.
IT_BDC-FVAL = P_0279.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM.                    " bdc_field
*&      Form FORMAT_MESSAGE
      text
--> p1        text
<-- p2        text
FORM FORMAT_MESSAGE.
DATA: L_MSG(100).
LOOP AT IT_MESSAGES.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
    CALL FUNCTION 'FORMAT_MESSAGE'
         EXPORTING
              ID        = IT_MESSAGES-MSGID
              LANG      = SY-LANGU
              NO        = IT_MESSAGES-MSGNR
              V1        = IT_MESSAGES-MSGV1
              V2        = IT_MESSAGES-MSGV2
              V3        = IT_MESSAGES-MSGV3
              V4        = IT_MESSAGES-MSGV4
         IMPORTING
              MSG       = L_MSG
         EXCEPTIONS
              NOT_FOUND = 1
              OTHERS    = 2.
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    write:/ l_msg.
ENDLOOP.
ENDFORM.                    " FORMAT_MESSAGE
reward if helpful,
keerthi

Adding multiple items at once to a SharedCollection

I'm playing around with Cocomo for the first time. I like it
a lot, but haven't yet got enough understanding of the API. So I'm
sure I'm missing something obvious.
Anyway. I want to build an application that share an array of
items between clients. The array should be persistent and when a
new client connects it will get the latest data. At the startup of
the first client I want to fill the shared array with default data.
I also want to revert to this data from time to time in an
applications lifecycle.
I've been checking out the examples and I think a
SharedCollection would be perfect for this scenario (not sure if it
really is?).
The problem I have is when I try to fill the SharedCollection
with data, using the addItem method within a for loop, I only get
an entry with the last item, instead of multiple entries (I'm
checking what data that has been added by using the Dev Console).
I'm doing all this in the SYNCHRONIZATION_CHANGE event (only the
first time it's fired).
I should also note that this happens the first time, when no
CollectionNode already is created. When a CollectionNode already
exist it works.
Is this totally the wrong way to go? Am I missing something
about how CollectionNodes should be created? Any help is highly
appriciated!

Hi ,
I actually modified the SharedCollectionExample locally to
have items added in the beginning in synchrinization change
handler. It works fine for me , here is what I did
In the SharedCollectionExample in the examples folder ,
add this line
_model.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE,onSynchronizationChang e);
in the onCreationComplete() method where you first declare
SharedCollection Class.
And in the
private function
onSynchronizationChange(p_evt:CollectionNodeEvent):void
if ( _model.isSynchronized ) {
_model.addItem({State:"Nevada",Capital:"Carson City"});
_model.addItem({State:"California",Capital:"Sacramento"});
I can get multiple items( i.e. these two items i added) in
the very beginning. If you check that the model ( SharedCollection)
is synchronized and add within it the items it should work fine and
will give you an initial set of items. Also, shared collection has
a property called idField and it will index objects based on this
field value with duplicates being overwritten.
I hope this helps. Otherwise please copy fractions of code
where you are still finding problem.
Thanks
Hironmay Basu

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Hi sashby51,
I've moved your discussion to the PDF Forms forum--the folks who visit this forum regularly should be able to point you in the right direction.
Best,
Sara

Conditional Display on multiple items?

Is it possible to use multiple items in the conditional display region of a report? For example I'm trying to use the
"Value of Item in Expression 1= Expression 2" and when I populate 1 item with the value in expression 2 it works just great but if I try to place 2 items that would both equal expression 2 it does not work.
I've tried
Expression 1:
P14_ITEM1, P14_ITEM2
Expression 2:
10
Is this possible? And if so is there different syntax I should using in Expression 1 to identify my items?
Thanks,
Zala

I have done something similar but I used the exists statements and write a SQL "SELECT 1 FROM dual WHERE :x1 = :x2".
Cheers Mike
Edited by: MikesHotRod on Aug 25, 2008 1:31 PM

Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
Is there any workaround to this error? so that drillthrough can be done even with multiple selection.

Hi Vikas,
The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted.
For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
1. Select a single Item.
2. Select all items.
Hope this helps!
Please mark as Answer if this helps! Thanks, Rajasekhar.

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

How do I delete multiple items at once instead of one at a time?

How do I delete multiple items at once instead of one at a time? I have several duplicate items in my library and would like to delete the duplicates. Thanks!

You can select multiple items using shift to select a range and control to add or remove items from it.
Regarding duplciates, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

How do I rename multiple files at same time?

I'm new to mac...after 20 years of PC I've decided to join Mac, but I'm having trouble with something that was pretty easy on Windows.
When I upload photos (or any kind of files) to my Mac, and I want all of the files to have the same name (with sequence number to indentify), how should I do?
For example, I want to rename my vacation pictures to vacation1, vacation2 etcc..but of course I don't want to do one-by one...
regards

Hello and Welcome to Apple Discussions,
Go to Macintosh HD > Applications > Utilities > Automator.
First select Library > Get Specified Finder Items.
Click to enlarge.
Then choose Action > Rename Finder Items.
This will rename all the selected files to vacation-nn.jpg etc.
By clicking the "Media" button at the top you can darg and drop media from iPhoto etc into the Finder items list.
Hope that helps.
mrtotes
Message was edited by: mrtotes

Is there a way to rename multiple Itunes songs at the same time

Is there a fast way to rename multiple Itunes songs at once, instead of renaming one song inside Itunes at a time? For example; So I can select multiple songs at once and rename each songs Genre all at the same time? Without needing to rename song by song?
Casey Computer

You can click on multiple songs, and change info in the Get Info > Info screen. This applies to most fields EXCEPT Name. iTunes has never allowed the simultaneous change of Name of multiple songs, presumably on the grounds that it is usually an error to do so.
Regarding Genre, yes, this can be changed for multiple songs at once, using the Info tab of Get Info.

How do i rename multiple files at the same time on a MAC?

I have been a mac user since 4 years now yet i cannot figure out how to rename multiple files in mac. In Pc i used to slect all and rename one e:g "ab.jpg" and the restwould be "ab (1).jpg" automatically. but in the mac its way too hard to do this on the automator. ..
please advise asap!
~haniah

You can do it with Automator.
http://www.automator.us/examples-01.html
Or with a utilities like these:
http://www.publicspace.net/ABetterFinderRename/
http://renamer4mac.com/
You can also do it using the Terminal command line.
Matt

Renaming multiple items!

Similar Messages

Maybe you are looking for