Renaming on On Permise DB that is configured for Sync using Sync Agent
Hi ,
We have configured a Sync Agent to sync from on premise to Azure DB and the Sync is working fine. Can you let us know if it would impact the Sync if the on premise DB is renamed? Do we have to configure the Sync Agent again or do the Sync set up from
the scratch.
Thanks,
Sangeetha
Hi Sangeetha,
Yes if you rename your on-premises database, you need to re-setup the sync from the scratch. Is it necessary to rename the database? Or you can provide the scenario here and we will try to figure out some alternative solution without break the current sync.
Regards,
Bowen
Similar Messages
-
When I try to sync I get a message that says "waiting for items the sync" then it just stays there and runs for as long as I keep it hooked up. Any ideas?
I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!
-
HT201317 is that a way for photostream to sync the events or the folders in iphoto?
is that a way for photostream to sync the events or the folders in iphoto?
so it seems like that is no way to sync albums between 2 imacs....
i am asking because i am a designer and visual references are very important to me. i have over 20000 pictures sorted out in my home imac with 63 (sub-directories) albums and even more folders so i can find them easily. i dont think i can do it all over again for my office imac and my macbook air. ayia, icloud! -
HT3228 how do I stop all my old emails downloading onto my iphone 5 that is configured for IMAP
How do I stop all my old emails downloading onto my iphone 5 that has configured automatically for IMAP?
You can't. It's cooked.
-
Configurator for home use?
I have replaced my wife's and my iPad 1 with the new iPads. Can I use configurator to setup the old iPads for the Grandkids to use when they visit?
I would be using mostly free apps for toddlers. Do I still need codes for these apps?
Is the configurator overkill for this use? I was hoping it would help me control the iPads more easily and let me just 'reload' them if the apps get lost etc.Absolutly,
We manage over 6,000 iOS devices for a large school district. Apple Configurator is an easy to use program. It would be very usefull to "supervise" those devices for your grandchildren. You can create configuration files that can prevent them from using the App Store, blocking in-appropriate content, or lock them into an app. I use the App Lock for my 6 month old. I keeps them from accidently clicking the home button and getting out of an app.
Download Apple Configurator
On the first screen under profiles click on the plus + and create a new profile.
Here is a look at a restrictions payload. A profile just a file that contains settings.
Click Save
Click Apps and then the + button. Import all of the apps your kids will want to use.
Plug in one of the old iPads and select to supervise it
Make sure you put a checkmark next to each app you want to install.
Supervise it
After a long weekend of grandkids drawing, and taking pictures, simply plug the iPads back into configurator and refresh. They are back to their original configuration.
http://www.apple.com/education/resources/videos/#introduction-to-apple-configura tor
Hope this helps! -
Optimal configurations for webobjects using Java Monitor
Can someone please let me know the optimal configurations for webobjects? We need details on the number of instances which can be created per cpu on the application server. Please also provide information on the thread configurations per instance in java monitor.
I do need the threads to communicate. The fact is that I simplified the thing just to understand better responses from you :). The real problem is more complicated. I have a arbitrary number of threads of two different classes. These threads have to access a shared resource (I used the boolean free). Moreover I have to give precedence to one of these two classes. So, I used to integers to represent two queues. The fact is that only the first thread to be ran reaches the end. The others, I saw, reach the wait() method, but then they stops and the program does not finish.
I mean that I thought this: the first thread to reach the wait() passes. Then, this first thread starts to use the resource (free becomes false). Every other thread which reach the while(...) stops there (there is the wait()). Then the first process, at a particular time, release the resource (free = true) and communicate this to another thread which was stuck at the wait() instruction (through the notify()). The problem I see is that every thread reach the wait() and stops there. After the first one is finished, no more... The notify() does not give the monitor to another thread (which would find free = true). This is my problem. Do you understand?
Many thanks for yuor answer anyway. -
To cut a long story short, I am trying to login to myaccount at three.co.uk which works for other users on my PC but not me.
This is because something is being remembered from my OLD account at three.
I have cleared everything via preferences and still no go.
If I delete .mozilla directory, login to three works fine.
But as soon as I reconfigure Firefox to use Sync, the login to three stops working.
I think there is an old cookie or something from when i used to use three last year. (I moved from three to vodafone and back again.)
So, how to I clear all this cached stuff from the sync server without losing my bookmarks?
ThanksHi David_King,
Thank you for you question, and your quote. However I must give a rebuttal.
Reset how Firefox handles the wav file from the Applications menu. [[Set how Firefox handles different types of files]]
Customizing is something that no ordinary browser can do. -
Is doing configuration for FB60 using customer field a core mod?
Hello,
For our project, a customer field 'ZZAPPROVER' was added in FB60 transaction code.
It is possible through configuration through the following path:-
SPRO --> Financial Accounting (New) --> Financial Accounting Global Settings (New) --> Ledgers --> Fields --> Customer Fields --> Edit Coding Block --> Customer-Defined Account Assignments --> Customer Include Structure
This basically added the customer field 'ZZAPPROVER' to the include structure CI_COBL.
The important point to note here is that it adds to BSEG table too.
Now the business is asking whether this is considered as a core modification to SAP.
Can anyone update where it is a core mod or not, and if there is any documentation to prove this?
Your comments are highly appreciated!
Regards,
Sanjiv JanardhananHi,
The adding of additional Customer field is available from ECC 6.0 onwards. This is a standard functionlity to enable the customer to add their own fields for better reporting. But SAP cautions that it is better to take backup before doing this addtioin. No posting transactions shall be performed while you are including the customer field. SAP recommends using the u201Clightu201D mode. For this, you only need to make the following entries so that all necessary changes to the dictionary and to the tables are performed automatically in the background:
● Collection (package)
● Field name
● Field description
● Data type
Character field (CHAR)
Character field with digits only (NUMC)
Trust this helps much!
Cheers! -
Can I unlock a iphone 4 that is locked for sprint use only so I can use another carrier
Can a iphone 4 be unlocked when it is locked to be used with sprint only so I can use it with another carrier ?
Only Sprint can answer that question for you specifically.
But Meg's answer is pretty much spot on. -
I run Windows 7 on my old MacBook Pro using Parallels Desktop 8. Am I licensed to use the same Parallels software to run Windows 8 on my new MacBook Air?
According to the Parallels Desktop for Mac licensing policy the answer is no.
In accordance with the End User License Agreement terms and conditions, a Parallels Desktop for Mac retail license can only be used for activation of Parallels Desktop for Mac on a single Mac machine.
Note: In order to use Parallels Desktop for Mac on several Mac machines, you need to purchase the corresponding number of licenses. -
Item category configuration for billing
Hello Folks,
I cannot find this configuration. Am I right to say that ITC configuration for billing does not exist specifically from a spro menu and its done in Sales Document item configuration screen .
Also, please confirm that billing relevance is set only in sales document item configuration screen as well and no other place.
regards
RaviRavi,
What you are saying is correct and this is the only place where you define the billing relevance of an item. Apart from this, there is no other place where you need to configure billing relevance of an item. You are correcti n your understanding. -
OER Atrifacts Store Setup and Configuration for CVS.
Hello,
My question is related to proper configuration of a CVS based Artifact Store in Oracle Enterprise Repository.
I've attempted to configure a CVS Artifact Store from within OER's Asset Editor (as described on page 27 of the OER Configuration Guide & pages 92-93 of the OER Admin Guide.) I have also ensured that this new Artifact Store is selected in the dropdown for the Submission Upload Artifact Store system setting on the OER Admin page. However, my configuration settings for the Store appear to be incorrect and I haven't found a CVS example that has been thorough enough to infer the proper settings.
So I'm hoping someone can assist me who has been through configuring a CVS Artifact Store for OER. I'll try to provide detailed information below with the hope that it may be of assistance.
First, analogous CVS settings that are configured for my standard CVS plug-in in Oracle Workshop. These settings are for the pserver protocol, but I think they will provide some value to someone who has experience in configuring a CVS Artifact Store.
The standard Eclipse CVS plug-in settings for our enterprise repository location:
Connection Type: pserver
User: sampleuser
Password: Pa55wd
Host: dev003
Repository Path: /cvs/Integration
This translates to repository location --> :pserver:sampleuser:Pa55wd@dev003:/cvs/Integration
(Which is the root of our enterprise CVS repository)
Now…within this repository location above there is a module (Development/OER-POC) that is located in:
/cvs/Integration/Development/OER-POC
…and checked out into a project called "Sandbox" located in the default workspace in Oracle Workshop.
Additionally, within the organization we also have HTTP access to CVS. This previous example XSD I just mentioned has an HTTP URI of:
http://dev003:8080/viewcvs/viewcvs.cgi/Development/OER-POC/src/schemas/ExtOfAddrRef/v1/ExtOfAddrRef.xsd?cvsroot=Integration
Now as I have attempted to properly set up the configuration for the OER Artifact Store I have "translated" the above information into the following entries on the Artifact Store setup screen:
Name: CVS Enterprise Store
Type: Raw SCM
Hostname: dev003
SCM Location: Integration (??? Not sure if this has been inferred correctly. If not what should be specified here.)
SCM Type: CVS
Download Path URI Suffix: cvsroot=Integration (??? Not sure if this correct based in previous information?)
Download Path URI: (??? Not sure what should be specified here. I have inferred several logical options but they have not worked.)
Finally, when I referenced page 62 of the ORE Core Registrars Guide PDF the "Additional Development documentation" link (http://devwiki.flashline.com/index.php/B02831) states:
• "All files from an SCM will be URL addressable. The SCM (or a third party) must provide a way to get a particular file based on a URL. In other words, we are not going to use any client libraries to write code that will retrieve us a file from an SCM. "
• "Added concept of a 'download path' to an artifact store. For example, consider our development environment. Eclipse will have SCM information (i.e. cvs.flashline.com), eclipse/cvs project information (i.e. projects/framework/modules/com.flashline.geneva.rbac), and file/cvs file information (i.e. /code/com/flashline/geneva/rbac/base/RoleContextPersistBroker.java?rev=1.66). Using this info, a fileinfo's uri can be set. The artifact store will then allow us to specify a download base path such as http://cvs.flashline.com/viewcvs/viewcvs.cgi/."
To conclude my questions are:
1) Based on the comments in the Registrar's Guide it seems clear that the intent of an Artifact Store is purely for the support of downloading the physical artifact that corresponds to an OER asset. I would conclude that "Raw SCM" based Artifact Stores do not intend to support direct check-ins for the various SCM systems. (rather assets/artifacts in Eclipse would be manually checked in from within the IDE environment). If someone could confirm whether this is correct that would be much appreciated.
2) Based on the information I supplied for the example enterprise CVS repository...what would the appropriate settings be for these fields on the Artifact Store setup screen:
a) SCM Location
b) Download Path URI Suffix
c) Download Path URI
3) Since the "CVS" SCM Type does NOT specify fields for username and password (unlike when you select other potential SCM Types in the Store setup screen); how should one handle credentials in CVS repositories?
Thanks in advance to any assistance.
~ToddHello user642477,
I'm facing the same problem.
It seems to me that the Oracles's guide line don't give enough information. I'll try to fixed it and whether I'm able to do so far I'll be in touch...
By the way, how could you browse to the link: http://devwiki.flashline.com/index.php/B02831? When I try it so a page cannot be displayed message is displayed.
Regards
felipe -
HTTPS Configuration for all BSP appliation users
Hi ,
I have enabled HTTPS Configuration for BSPApp using X509 certtfictes in our CRM Landscape.
This i have done for list of users and it working well.
I want the same functionality for all users, Please suugest me.
Regards,
SatyaAny Idea?
-
OVD One step configuration for AD
Hi all,
Please help me to sort out the problem in configuring the one step configuration for AD using OVD.
I had followed the document of Oracle® Virtual Directory Product Manual Release 10g (10.1.4.2.0).
Link: http://download.oracle.com/docs/html/E10286_01/ovdm.htm#CACCGAAF
But i am not able to complete the configuration.I was able to follow the steps upto 5.
In step6 by clicking the button Verify Directory Servers it is taking more time to validate. Where i can check logs for this.
I was able to ping and i was able to bind to Active Directory. But this step is not able to complete. It is telling "*Querying XX.XX.XX.XXX:389*" for namespaces. I had waited for two hours no message.
What may be wrong in configuration. I had specified the following values in the cloumns:
Domain DNSName: company.com [Active Directory Root DN]
Server DNS/IP:Hey friend,
You are absolutely right. The issue is with DNS.
Without specifying DNS in the entry, it is able to validate the Active Directory.
Now, how can i resolve DNS issue in my system. Can you help me to sort out in solving this issue.
Thanks in Advance,
Sandy D -
I have found a person who has a driver software to connect Labview with a general PCI card. But he says that i need to download a freeware software from NI website to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ?? Is there any other way out ??
I would ask the person who told you about the freeware software to help you find exactly where it is. I am not aware of any freeware software for configuring motion PCI cards but maybe the person you know might be able to help you locate it.
Maybe you are looking for
-
I am using Outlook 2010 and I also use a Iphone 4s. I use Outlook to correct all my contacts and them it sync with my phone BUT I get different variations of the contacts. Almost as if there is another file it is going to. Can I check to see which
-
Maintaining multiple ship to party address in SD
Hi Guys, Could you please let me know, how we can maintain multiple ship to party address for a customer? Thanks, Kam.
-
How to do Script in Acrobat reader pro * Monthly Payment*
Hallo, I hope somone can help me with script. I need an editable PDF file that have two text field. text field1 have price, text field2 shoud be calculate automaticly monthly payment, Example: if the price in filed1:100-300 $---------------shoud b
-
Help with downloading Photoshop CS5.1 on iMac
Hi there, I just bought a new iMac, and I am unsure of what to do with photoshop and lightroom. I have bought and downloaded both of them in the last year and a half through the education discount store, and they are on my laptop. I have older versio
-
Import House Bank Accounts- DTW
Hi All, Is it possible to import house banks (DSC1) through dtw? The template does not seem to work and based on what I could find from the forum is that its not possible. We are using version 9.. Any suggestions?? Thanks, Joseph