Renaming problem on import

I tried to create a renaming convention YYMMDD_Filename_CustomText. Unfortunately, after creating the renaming profile, it just begins importing photos without ever asking what the CustomText should be. All the photos imported then come in with "untitled" preplacing the CustomText area of the filename.
Also, I've been loading lots of medium res jpeg photos off DVD in LR Beta 4. They seem to be taking a really long time - much longer than expected. 12 per minute is all that I'm achieving.

The import dialog will not prompt you for custom text. It leaves a dialog for you to type within at each import. It is the Custom Text field in the File Renaming panel on the RH Side of the Import dialog. If you do not fill in text, Lightroom will substitute "untitled".

Similar Messages

Problem to import MOV files

Hi,
I have a problem to import mov files from my hard disk (coming from a Casio Exelim ZR100 @ 1920x1080, 30 pic/sec. 44kHz, codec: H.264/AVC ). I tried different project setups - doesn`t work . I get a common failure message. MTS file import works...
System Win 8
Premiere Elements last version, all updates done
Error Message:
nase30

Media import
A Google Translate of your error message says that you are experiencing a generic importer error; consequently, not an editing nor exporting issue.
If you are using the Casio ZR 100, the video involved would be characterized as
1920 x 1080 @ 30 frames per second (progressive)
Video compression = AVCHD (MPEG4 AVC/H.264)
Audio compression = IMA-ADPCM (stereo)
File Extension = .mov
On the Premiere Elements side you have Premiere Elements 11 on Windows 8 (assumed 64 bit).
I have downloaded one of these files from your camera brand/model from an online source.
Windows 7 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Windows 8 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Based on my findings, I have no evidence to make a generalization that there is a problem with this Casio video and Premiere Elements 11 on Windows 7 64 bit or Windows 8 64 bit.
So that leads us to look for other factors. Top of the list is the version of QuickTime that you have installed on your computer. (As John T. Smith has already asked and is awaiting a reply on that. If you have the latest version of QuickTime installed, then I would uninstall it and then reinstall it.
What type of problem are you report
"it worked before but not now"
or
"it never worked before"
What might be interesting to look at. If you rename just the file extension of your Casio AVCHD.mov from .mov to .mts, .m2t, or .m2ts can you then import the problem file?
We will be watching for your results.
Thank you.
ATR

Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA      700     0015
SAP_BASIS     700     0015
PI_BASIS      2006_1_700     0006
ST-PI     2005_1_700     0006
CRMUIF         600     0003
SAP_BW      700     0017
SAP_AP                700     0012
BBPCRM                600     0002
First I had the following error:
   Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
   GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
     0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
     0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
     6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
     1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
   successfully set a temporary lock on table REPOSRC
   REPOS /SAPCND/LDETERMINATION$14                A replaced.
   REPOS /SAPCND/LDETERMINATIONU14                A replaced.
    [dev trc     ,00000] Wed Nov 26 16:33:14 2008                         1315447 8.171484
    [dbdsoci.    ,00000] *** ERROR => invalid offset 0 for placeholder 16
                                                                                71 8.171555
   unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
   dsql_open returned with unexpected error code 2
   Please contact the SAP support.
   End of Transport (0016).
   date&time: 26.11.2008 - 16:33:14
   5 warnings occured.
   3 errors occured.
   Main import
   End date and time : 20081126163314
   Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
   Summary:
    24 DOCUT imported.
    16 DYNPS imported.
    30 DYNPT imported.
   387 REPOS imported.
    43 REPOT imported.
   Totally 505 Objects imported.
   Totally 3636 tabentries deleted.
   Totally 14 objects activated.
   Totally 12229 tabentries imported.
   62066888 bytes modified in database.
    [dev trc     ,00000] Wed Nov 26 18:14:19 2008                         20996974 40.917838
    [dev trc     ,00000] Disconnecting from ALL connections:                   30 40.917868
    [dev trc     ,00000] Disconnecting from connection 0 ...                  287 40.918155
    [dev trc     ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                              5759 40.923914
    [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                921 40.924835
    [dev trc     ,00000] Now I'm disconnected from ORACLE                    8230 40.933065
    [dev trc     ,00000] Disconnected from connection 0                        90 40.933155
    [dev trc     ,00000] statistics db_con_commit (com_total=527, com_tx=307)
                                                                                59 40.933214
    [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                52 40.933266
   Disconnected from database.
   End of Transport (0004).
   date&time: 26.11.2008 - 18:14:19
   2 warnings occured.
   Main import
   End date and time : 20081126181419
   Ended with return code: ===> 4 <===
Please advice me.
Regards,
Ahmed

I have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround.

Any way to rename files when importing from camera with iPhoto?

I have a naming scheme that I've used when importing photos from my camera (e.g. 2008-09-12-Event ). I can't create a custom folder (in Pictures but outside iPhoto Library) or rename things when importing with iPhoto - is that right? I can't find any advanced options to import ...
If I want this (and don't want to use Adobe Bridge CS3), do I have to get Aperture?
Thanks -
Alexa
p.s. I haven't really figured out WHERE my photos go with iPhoto? I've been editing in Photoshop Elements 6 but then have to "Save As" to replace the file - saving it doesn't do it (I think that sends it to the iPhoto library somewhere?) Eek...

Alexa:
You might consider this workflow:
1 - using either Image Capture or a card reader upload the images to a folder on the desktop.
2 - name the folder with a brief description of the shoot. I use a short date and description: 08/01/08-Dinner at Toad Hall
3 - use a file renaming application like Resize! to batch rename the files to your specification. I use the international date (for the capture date) and a brief description: 2008-08-01-Dinner at TH-001.jpg.
This allows for good chronological searching and sorting as well as text searching on the description. It also avoids duplicate file name issues in the future. Granted a few extra steps up front but saves me a lot of time later on.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem while importing a Crystal Report in SAP Business One

Hi Experts,
I am facing a problem while importing a Crystal Report in SAP Business One, it displaying an error "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]" , and there is no use of this table OUQR in the Query.
Kindly let me know the solution.
Regards
Rahul Singh

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Problem in Importing Transport Request

Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
Siva

Hi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Problem During Importing using DBMS_DATAPUMP

Hi,
I am facing Problems while Importing usinf DBMS_DATAPUMP:
Its not showing any Error but the Tables not getting Imported.
Below is the Code whihc i have written for Import:
CREATE OR REPLACE PROCEDURE Data_Pump_Import_Load AS
ind NUMBER; -- Loop index
h1 NUMBER; -- Data Pump job handle
percent_done NUMBER; -- Percentage of job complete
job_state VARCHAR2(30); -- To keep track of job state
le ku$_LogEntry; -- For WIP and error messages
js ku$_JobStatus; -- The job status from get_status
jd ku$_JobDesc; -- The job description from get_status
sts ku$_Status; -- The status object returned by get_status
BEGIN
-- Create a (user-named) Data Pump job to do a schema export.
DBMS_OUTPUT.PUT_LINE('COMES HERE');
h1 := DBMS_DATAPUMP.OPEN(operation => 'IMPORT', job_mode =>
'TABLE',job_name => 'RET_IMPORT_TEST');
DBMS_OUTPUT.PUT_LINE('COMES HERE1111');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEXPORTTEST.DMP', DIRECTORY => 'EXPORT_DIR',filetype=>1);
DBMS_OUTPUT.PUT_LINE('COMES HERE2222');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEIMPORTTEST.LOG',DIRECTORY => 'EXPORT_DIR',filetype=>3);
DBMS_DATAPUMP.SET_PARAMETER (handle => h1,
NAME => 'INCLUDE_METADATA',
VALUE => 1);
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'DATA_ACCESS_METHOD', VALUE =>'AUTOMATIC');
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'TABLE_EXISTS_ACTION', VALUE =>'REPLACE');
DBMS_OUTPUT.PUT_LINE('COMES HERE3333');
-- Specify a single dump file for the job (using the handle just returned)
-- and a directory object, which must already be defined and accessible
-- to the user running this procedure.
-- Start the job. An exception will be generated if something is not set up
-- properly.
DBMS_DATAPUMP.START_JOB(h1);
-- The export job should now be running. In the following loop, the job
-- is monitored until it completes. In the meantime, progress information is
-- displayed.
percent_done := 0;
job_state := 'UNDEFINED';
WHILE (job_state != 'COMPLETED') AND (job_state != 'STOPPED') LOOP
dbms_datapump.get_status(h1,
dbms_datapump.ku$_status_job_error +
dbms_datapump.ku$_status_job_status +
dbms_datapump.ku$_status_wip,-1,job_state,sts);
js := sts.job_status;
-- If the percentage done changed, display the new value.
IF js.percent_done != percent_done
THEN
DBMS_OUTPUT.PUT_LINE('*** Job percent done = ' ||
TO_CHAR(js.percent_done));
percent_done := js.percent_done;
END IF;
-- If any work-in-progress (WIP) or error messages were received for the job,
-- display them.
IF (BITAND(sts.mask,dbms_datapump.ku$_status_wip) != 0)
THEN
le := sts.wip;
ELSE
IF (BITAND(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
THEN
le := sts.error;
ELSE
le := NULL;
END IF;
END IF;
IF le IS NOT NULL
THEN
ind := le.FIRST;
WHILE ind IS NOT NULL LOOP
DBMS_OUTPUT.PUT_LINE(le(ind).LogText);
ind := le.NEXT(ind);
END LOOP;
END IF;
END LOOP;
-- Indicate that the job finished and detach from it.
DBMS_OUTPUT.PUT_LINE('Job has completed');
DBMS_OUTPUT.PUT_LINE('Final job state = ' || job_state);
dbms_datapump.detach(h1);
END;
/

Use metadata_remap proc with REMAP_SCHEMA option:
DBMS_DATAPUMP.METADATA_RAMAP(id, 'REMAP_SCHEMA', 'SOURCE_SCHEMA', 'DESTINATION_SCHEMA');

Problem in Importing in configuration.

Hi All,
I am facing a problem while importing the configuration object saying that "UNABLE TO CONNECT TO SLD".
Can you please let me know if i need to check anything , or anyway out.
thanks,
JAY

Thanks a lot for all your valuable suggestion.#
I have checked the SLDCHECK it is perfectly all right as expected with most of the things in gree and there is no red mark showing in from the perticular transaction, so also the SLD part is also opening perfectly as expected.
what next ... i am not findng any clue to progress.
thanks,#
JD

Problem in importing from dmp file

Hi ,
I am facing problem while importing from dmp file on unix server
Error is as follows :
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
Export taken was with user xxx@yyy
import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
please help me out.
Atul Chougule

I tried with FROM USER / TO USER , but the result is same.
$ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
I am stucked up ,Dont know what to do .

Problem in importing package

i am new to java and facing problems in importing package which are self made.
secondly does JDK 1.1.3 can support swing

Hi,
I had some problems myself. I will add few lines, maybe it helps:
OK, let's assume that you work in a directory. In this case, set classpath to this hierarchy as well as to "." ('this' hierarchy - like in DOS).
Now, assume that you want to use packages MyPack1 and MyPack2. The source files of classes belonging to MyPack1 must:
- start with command
package MyPack1;
- be located all in the directory MyPack1
(and the same for MyPack2, of course)
If you want to use MyPack1 within MyPack2, you have to include:
import MyPack1.*;
even though MyPack1 is, in fact, located on path: ../MyPack1/*
(trust the classpath is important here)

Renaming problem on import

Similar Messages

Maybe you are looking for