Renaming radio station: name keeps changing back

If I select a radio station, right click "get info" and change the name on the second tab, the name of the radio station successfully changes. However, much to my annoyance, when I double-click the station, the name changes back to the name broadcasted.
Can I prevent this behavior?
(ITunes 7, Windows XP)

Are you saying that this is another thing that has
stopped working in V7?
Well, dunno. I heard so many people say they like itunes so I decided to try it. In other words, I never tried V6 I just downloaded the newest version.
Since this is not the only issue I've experienced with itunes thus far, I think I will de-install, go back to winamp or whatever and stay away from apple apps for just a little while longer again.
BTW: Thanks for the post polydorus!

Similar Messages

MacBook Computer Name Keeps Changing

Recently my Mac computer name keeps changing. It's the normal name, but with a number at the end that keeps incrementing. How can I stop this?
I'm not sure if it's something to do with the fact I had a partition for the public OS X Yosemite, which I have now deleted.
Any ideas? Thanks.

I was having the same problem for awhile, even contacted support so they could screen share and see what I meant.
What I ended up doing was correcting the name and then unchecking all the boxes in Sharing. Open up Airport Utility and reset the router (basically I changed my password only because that's the easiest way to make it update). Go back into Sharing and recheck the sharing options that you had previously. Viola!
So far it's been a week now and my computer name has not changed. Hope this helps

How do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

how do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards.

[SOLVED] Network interface name keeps changing

My network interface name keeps changing between wlp2s0 and wlan0. This is a real pain, since I never know what name will be generated at boot. Most of the time it's called wlp2s0, so this is what netctl is set up to handle by itself. At boots were wlan0 is generated I have to connect manually.
I've tried making the name static by adding a rule to the /etc/udev/rules.d/10-network.rules. The rule i added was:
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="48:5d:60:7e:64:e9", NAME="wlp2s0"
Wlp2s0 is generated at boot alright, but I still have to connect manually with this solution. As if the "new" wlp2s0 is not recognized as the old one (same MAC). What gives?
This is on an Asus Eee 1001PXD, with the Qualcomm Atheros AR9285.
Last edited by madr (2013-05-18 20:09:34)

I've now been able to replicate the issue, and run the command:
journalctl -b
I did find the output:
mai 18 02:30:02 <hostname> systemd-udevd[126]: error changing net interface name wlan0 to wlp2s0: Device or resource busy
I haven't been able to process the whole output yet (I'll continue tomorrow if necessary), but I've found some things that I hope will clearify things. I get similar outputs to the following a lot throughout:
mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: carrier lost
mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: waiting for carrier
mai 18 02:30:04 <hostname> systemd[1]: [email protected]: control process exited, code=exited status=1
mai 18 02:30:04 <hostname> systemd[1]: Failed to start Automatic wireless network connection using netctl profiles.
mai 18 02:30:04 <hostname> systemd[1]: Unit [email protected] entered failed state.
mai 18 02:30:04 <hostname> systemd[1]: Starting Network.
mai 18 02:30:04 <hostname> systemd[1]: Reached target Network.
EDIT:
I see now that this is later in time, so that's not so strange after all. I'll look some more.
EDIT2:
The error code that a name change i impossible is the first time the term 'wlan0' occurs in the log. However there's a line much earlier that talks about wlp2s0:
mai 18 02:29:59 <hostname> systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s0.device...
But as I said, if this information doesn't help, I'll have a closer look at the output tomorrow. Getting late here in Norway now.
Last edited by madr (2013-05-18 01:20:50)

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English.
[email protected]

'''''What''''' webpage do you have set as your homepage? <br />
Are you saving cookies for that page?

Changes I make to radio station metadata keep getting undone

Whenever I listen to an internet radio station through iTunes, iTunes will undo any changes I've made to the metadata. Like, one station I've got in iTunes has its Genre set to "80s,new wave,electronic/dance", and I change that to "Radio", but then as soon as I listen to the station again it gets changed back to "80s,new wave,electronic/dance".
This is really annoying because I've got twenty different radio stations in iTunes, and each of them has its own weird genre ("World Asian Japanese JPop", "Vocal Trance Dance Pop", etc.), and so iTunes 8 shows me these genres which each only have one entry in them.
How do I make my changes "stick"?

It reads that I don't have enough adminstrative privileges for every account to download the program
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Name keeps changing...

Seems odd that it only happens to one entry. I have an entry for "wnyc fm" streaming radio station, every now and then I'll go back to look for it and the name has changed to a generic "my station".
Also, sometimes when the streams stall, it'll advance to the next station in the list, very odd.

Hi UncleZen_，
The coded UI test builder recorder just recorded the actions on your UI, the reason why the specific controls have the dynamic name or why it always changes with different log in users, it would be related to the app developer, so if
possible, you could discuss this issue with the development team members, I think you could get more useful information. So it would be not the test issue.
Sincerely,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

USB wireless adapter - interface name keeps changing

I have used different usb wireless (G) adapters with my 12" Powerbook G4.
Each was automatically assigned an interface name (BSD) such as en2, en4.
I recently updated to a Wireless N dongle (D-Link DWA140) which works great with my new Belkin Wireless N router.
I have had a few connection problems where the dongle was named as enNull.
After rebooting and re-entering the ip address via DHCP, I noticed that the same dongle has been renamed each time e.g First as en5 then en6, 7 and 8. It's now called en10
It works fine but is it possible to reset the name/number of this wireless adaptor using something like ifconfig in the shell Or some other way. I understand that en0 is built-in ethernet and en1 is Airport. I have 2 other dongles which are still identified as en 2 and en4. But my current dongle has an inflation problem and I would like to reset it if possible to a lower number.
Is this possible or am I mad to even consider it?
any help welcome.
John

ratcheer wrote:Inxsible, no, it is a PCI card. I have booted Arch twice, today. One time it got wlan0, the other time wlp6s0. I ended up just creating two scripts, wlan0_start and wlp6s0_start
That is very strange that PCI cards would keep changing names between reboots. Maybe you should investigate that to figure out what's going on. Check the dmesg and journalctl after each reboot and see what the interface is named as. Maybe that will give you some clues as to what "external" program is responsible in naming the interfaces.

TS3171 IO'S and bus names keep changing from session to session

My IO'S keep changing there names back to original factory names after I change names on bus and input output they do not save from session to session .i am in 9.21 ver and using lion any help would be great

To recap (correct me if I'm wrong), two things have to happen for session sharing to work: 1. the session must be passed in a cookie (the same cookie used by appls sharing the session), and 2. the appls must use the same authentication.One solution is for both/all participating applications to use an authentication scheme based on our built-in session management mechanisms that use a cookie in conjunction with our internal sessions table. The schemes may differ in most other repects, e.g., one might use LDAP and the other your own user tables to authenticate. N.B., the no-authentication (DATABASE) scheme does not use a cookie. Another solution is for you to implement your own session management infrastructure. With that, the only constraint on session sharing between applications is that a) the applications must belong to the same workspace, and b) sessions already "registered" in the internal sessions table with an authenticated username may not be used by a different authenticated user.
Optionally, if you want either of the appls to have public access you make the pages public.Yes.
Scott

Why does the local network and computer name keep changing?

After upgrading to Yosemit the local network name and computername on my iMAC keep changes link:
Mycomputer-1
Mycomputer-2
Mycomputer-3
Why?
I have tried to change it back in sharing and network locations.
Is this also the reason the my iPhone cannot find my iPhone often cannot find my iMac when I will sync it? Then I have to restart the iPhone and iTunes on the computer. This happens very very often.
Maybe it also linked to these errors which the log is full of - many every minute:
19/10/14 12.11.09,522 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:256
19/10/14 12.11.09,543 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:12856
19/10/14 12.11.09,561 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:0
19/10/14 12.11.09,565 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:44032
I think the is some bug/clash between bonjour and other network protocols. That is only a guess.

After resetting the computer name and local host name to the correct name without the number I also shotdown my iMac, my AppleTV, my iPhone, my iPad and then rebooted my Airport/Time capsule it seemed to work at least for several days. But yesterday I discovered that my Apple TV now also has changed name to Apple TV (2).
I logged into iCloud.com to see my devices and here it was really wired. My Apple TV was called Apple TV (2) and my iMac also had (2) after the name. Then I checked it on the iMac but here it was correct! Why can it have one name on the iCloud and another on the computer.
I restarted both the iMac, Apple TV and Airport Time capsule then everything was correct also on iCloud.com.
But today the iMac was called the name (2) again on the iMac. And now the local host name also had -2 after the name. It has not always been both names that has changed. That is really wired. And today Wifi was not working on the iMac after wake from sleep. I changed the name back and rebooted again also the Airport Time capsule. Now it is working again.
The log is still full of this messages:
02/11/14 19.22.13,186 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:1901
02/11/14 19.22.25,738 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:34051
02/11/14 19.22.25,758 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:12342
02/11/14 19.22.25,900 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:34051
02/11/14 19.22.25,919 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:1901
02/11/14 19.22.27,636 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28772
02/11/14 19.22.27,683 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:27693
02/11/14 19.22.27,714 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28533
02/11/14 19.22.49,833 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:29281
02/11/14 19.22.49,866 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28528
The name is not the only problem. Often itunes will not find my iPhone and iPad. Then i need to close iTunes and restart the iPhone and iPad then it works for some time.
And the iPhone and AppleTV will not always wake the iMac from sleep. I am wondering if the is linked to the changing of name.
I have seen by googling that it can be related to a sleep proxy problem so it seems like that here is two devices on the net with the same name that is why name is changing, but to know this do not help me to solve the problem. I have also seen all the suggestion to turn almost every services off on the computer, but again I it is not a solution and I have the iMac and devises to use the functionality not to shot everything down. So I do not really understand people saying turn off itunes, turn off blueboth, and turn off this and that.
Apple must soon come with a real solution. We are really many people have these problem since we upgraded to Yosemite and iOS 8.
I have also listed some of the iTunes errors from the log below:
02/11/14 19.24.48,160 com.apple.xpc.launchd[1]: (com.apple.quicklook[1364]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
02/11/14 19.24.52,279 Console[1368]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
02/11/14 19.25.06,907 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:5
02/11/14 19.25.06,908 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:5
02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Mux ID not found in mapping dictionary
02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Can't handle disconnect with invalid ecid
02/11/14 19.30.19,234 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
02/11/14 19.30.22,192 soagent[429]: Can't allocate SOHelper <SOMessageHelper: 0x7f9053a102c0> inside com.apple.soagent
02/11/14 19.30.54,871 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:6
02/11/14 19.30.54,871 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:6
02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Mux ID not found in mapping dictionary
02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Can't handle disconnect with invalid ecid
02/11/14 19.32.06,137 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.

Sequence and clip name keeps changing... Why ? Solutions ?

The sequence and clip name on a particular project keeps changing. It usually takes the name of of an audio file. Deleting the preferences, opening the timeline in a new project, making it offline and reconnecting it again, et. all doesn't help ? What is causing this ? HELP
Mac Pro Quad core
Memory 8GB
Storage - XSAN
FCP version 7.0
OS X version 10.5.8
Quicktime 10 & 7.66 both installed
Anyone has a solution for this....
Jp

I made the sequence off line and save it as a new project. Then deleted the preferences and opened the project..... reconnected the media. Most of the clips showed the correct clip name and the sequence name also didn't change. But a few audio tracks still had the old problem....
Thanks for the reply.... haven't updated yet..

Network share name keeps changing

I have setup my eMac to have the network share name eMac but it keeps changing into +eMac (2)+ does anyone know why?

well I do, but a short while later.
or some weeks or even month later, I can do it again.
this is a problem because I need to connect to it from my server.
the server is a Dell PowerEdge 1650 (I know, old, but it was cheap and it does the trick) which is running Linux Ubuntu Server 9.10 "Karmic Koala", since it's a server I did not install a DE(desktop environment) so I need to use the bash or shell (depending on what I do, since it has both)
how I connect it like this (on the sever):
+mount -t nfs "emac.local:/dev/macintosh HD" /storage/nfs/emac/+
the problem here: I use a DHCP, with DHCP reservation.
since I use DHCP reservation the IP should not change.
but the DHCP reservation doesn't really work correctly,
because of this, if my mac is offline (A.K.A off, I never disconnect it), the IP is in the pool, and thus can be assigned to a other computer.
since the IP may change depending on if it is on at a given time.
I need a way to always successfully identify my emac.
for this I use the network name.
and now it changes too!
which means that in order to find it I need to know if it still has the same network name, or what it's IP is.
I can find the IP from a web browser since it's my router who is my DHCP.
but the server doesn't have one.
so I'd have to use a other computer, since the router doesn't allow SSH/TELNET connections.

Group names keep changing ..

I am creating a report will mulitple queries ..
i notice that the report builder keeps changing the
group name ..
a) how does report assign gruop name and
how can i change in a way report doesnt alter it ..
deepa

Hi Deepa,
Reports Builder will assign a default name to a group inside the data model when you write the query, but once a name has been assigned to a group, it should not keep changing the group's name.
For your own custom name, double click on the group heading in the data model, and type your desired name in the "Name" field of the Property Inspector that comes up. It should not change thereafter.
Navneet.

Colour option keeps changing back to grey scale

I imported a photo into illustrator CC and I then live traced it and expanded it. When I select it the colour options are grey scale. I can change the option but if I click off the image the options go back to grey scale. The doc colour set up is cmyk. How do I get it to stay on a different option without having to keep switch it all the time?

Step 1 - import colour photo
Step 2 - change colour options and colour mode to cmyk
Step 3 - Image trace default
Step 4 - expand
Step 5 - direct select parts of expanded image to change the colours
Step 6 - open colour options menu and see that it is grey scale
Step 7 - change it again to cmyk and choose a colour
Step 8 - direct select new part of expanded image
Step 9 - goto colour options again which has changed back to grey scale
Step 10 - change again to cmyk and pick a colour
Maybe this is normal behaviour?? But seems really cumbersome to have to keep on changing it for everything I select. I just want it to stay on cmyk not revert to what is selected.

Time keeps changing back two hours!

Ipod touch 4th gen. The time zone is set to Monterey (Tennessee). They have the same time as we do in Crossville. My Ipod keeps changing the time back two hours for some reason. So right now, its 9:26. My ipod says it's 7:26. I can change it back manually, but it just changes back. I didnt have this problem before i had to restore it from the update freeze. Is there another Monterey in the U.S.A. or is it just the ipod?
My computer (Toshiba Windows 7) does it too, but i dont remember if it did it before my ipod froze.
Please help!

I didnt think it was obvious. Everyone I asked always told me it was a different time zone. Well whatever, thanks.

Renaming radio station: name keeps changing back

Similar Messages

Maybe you are looking for