Renaming the pdf files?

i have not found a way to rename the pdf files I have downloaded. In other apps it is easy to do so, but iBooks does allow just change the files and not other editing. Do you find this important?

What are the names directly after splitting?
1.pdf 2.pdf 3.pdf.....they are names as in sequence but practically there are not in sequence they are just vertically split
how do you get 56 files out of 56 pages if each file has 2 pages?
i got 56 files after splitting vertically. each side will be splitted into separate files
what is the naming convention the splitted files should be renamed to?
any name but the sequence should be proper. if it says 1.pdf then it should point to 1st side
And what does this all have to do with Java?
need to know the programming logic on how we can do it in java.

Similar Messages

Can I rename a PDF file based on the metadata? (prefer a bulk rename)

I had to do a file recovery on a hard drive with a program called TestDisk. It recovered 30GB+ of files but it recovered data by ignoring the partition/partition table. Because of this it uses its own naming structure during the recovery. The names of the files are f_______.XXX. I noticed that when I hover over the PDF files it actually displayed the original file name. I looked in the file proerties and noticed the PDF tab which contained this. Does anyone know if I can rename the file(s) using this data. The summary tab on the file properties is blank but the file name is located under this PDF tab (I didn't even know this existed). I don't know what I'm going to do with the rest of the files but being able to bulk rename 8GB of PDFs would be great! :-)
Thanks,
Sundiata

ok I'm not into programming and not familiar with Javascript. Does anyone know any websites to maybe assist me with making this batch file or at least provide enough basic Javascript info to get me started and I may be able to figure this out. Or is this Javascript something that is auto. something created during the renaming process creation?
Thank

Name the PDF file with a field name

Hi,
I'm new to ES2 and Form creation in LiveCycle, my knowledge in scripts is very less or none i can say, if any one out there could help me out with this i'd be greateful.
I have created a fillable PDF Form using LivecCycle ES2 and would like to know how to name the PDF file with a field value from the form when " save form " or " submit " button are clicked.
Thanks in advance.
Mithun.M.I

You can save the form with name generated from a field's value, but therefore you will have to install a folder level script first and design a custom save button in your form.
You cannot do this with the applications save or save as... buttons, and you also cannot rename a file on submit.
Here's an example form and a folder level script. (Maybe to complicated fdr newbies)
http://thelivecycle.blogspot.com/search/label/Save

Renaming a PDF file.

In Adobe Reader X...when I rename a pdf file that is on my desktop, and upload it to a report it appears on the report with the previous name. I want it to appear as I have renamed it. Please help!

Yes thank you......It is a real estate 4 page document that I need and have uploaded into my real estate listing, and that I have scanned from the file option to save on my desktop in pdf file. I then rename it by removing the last 5 zeros and pdf from the name I have previously chosen in the printer Control Center 3. When I rename the file on my desk top it looks OK, Then I go into the MLS real estate website and upload it after I locate it on my desktop. It uploads fine and shows the filename at the left of the doc which is OK except the 5 zeros and pdf are there again. I named the file ...12 Gardenville-pcd pdf. and want it to appear that way after uploading, but it apears as 12 Gardenville-pcd pdf 00000 pdf. the way it came from the printer to desktop and before I renamed it.
Sorry I couldn't reply sooner Also yesterday a gentleman from Adobe Paid tech support (though I didn't have to pay) was able to take care of this problem, and I was able to successfully upload a renamed doc, but when after I tried to accomplish it on my own I was not able to succeed in doing so.
Thanks,
Joebif.

How to rename a pdf file on android 4.0

how to rename a pdf file on android 4.0

If you have the latest version of Adobe Reader, you can go to Documents, make sure that the view is set to "Folder View". Navigate to see the file you want to rename, and then you can use the "manage" button to go into a mode to select the file you want to rename, then tap the "rename" icon, which looks like a text cursor.

I have Windows 98 and need Acrobat to open up the pdf files for 5.0

I have the old system, Windows 98 and presently have the free Adobe 5.0 version on my Compaq Presario Computer, and it is a 5242 model desktop.
I have inadvertanly switched over to Compaq Carbon Copy 32 Version 5.0 but since, have uninstalled it and now, on each of what was the pdf files initially of which I have, of which is at least 16 or more, on each of those files, an error message comes up and says "PROGRAM NOT FOUND," and states the following: "Windows cannot find CCW32EXE. This program is needed for opening the pdf files." And then it has a dialogue box with the computer operational symbol in it as C:\ and then it wants me to locate it. I cannot locate it through the "auto" because, this sytem being so old, doesn't have a magnifying glass or a "search" tool to do this in the "My Computer Icon on the Desktop as the Compaq people wanted me to do. I would have to do this manually. I have already talked to the Compaq people on their chat line and because of this, they said they couldn't help me with this problem and referred me over to you.
I've tried to find a download for 5.0, though I really don't think I need one since it is currently installed. I believe the proper way to fix this is to just convert the CCW32EXE over to the Acrobat pdf files and have those files opened and should open up all of my 15 or so files altogether at the same time because they all converted over to something else at the same time prior.
Are you able to help me?
But I believe to alleviate this problem, if you could just give me the information to be able to open up the pdf files to 5.0 and find out what download I may pursue, it might be able to correct this problem. I already have the 5.0 Acrobat installed, however.

Hi Aandi,
I have followed your directions and I have the old system of Windows 98, so I had to go to "programs" and come up to Acrobat 5.0 and once in there, all of the Window there is greyed out, although I can still go to the tool bars above in it. I went to "file" and went to "open" and from there, I received an "open" window with a dialogue box in it and in that dialogue box as I scrolled down, it wants me to put in there, one of the following, "desktop," "my documents," "3 1/2 floppy [A:]," "[C:]," "system _save [D:]," ""[E:," "[F:]," ete; of these which do I pick in the "open" dialogue box? and down at the bottom, is the FILE NAME and what do I put in there? Just below that, it has the FILES OF TYPE which has there Adobe pdf Files, in it's dialogue box. I hit these, but I still get an error message of which basically says, "NOT FOUND, please put in proper file name given." And I don't know actually where it is given.
So, as you see, I am a novice in all of this and you can contact me at my e mail address which is [email protected]
and should a reply be needed, I'll come back to the forum for a reply.
I really need to open up the Adobe 5.0 pdf files. All of the pdf files, simultaneously went over to Compaq Carbon Copy 32 of which I since, uninstalled. But I really need to get back and open the Adobe 5.0 pdf files.
And I want to thank you for your support and eagerly awaiting your help.
Thanks,
Now, I did do one of the following: I went to C: which came to Acobat 3 and I hit that which came to Reader and I hit that which came to the following: ACROBAT which gave me ACTIVE X - BROWSER - FONTS - HELP - OPTIONAL - PLUG-INS

While converting spool to PDF, no data is coming in the PDF file.

Hi All,
I am submitting a z program ZPR022_INNCOMETAX_REPORT_COPY1 (which has some output display) from Z_ITSLIP_MAIL. I am creating a job, submitting the above program via JOB to SAP-SPOOL.
In program ZPR022_INNCOMETAX_REPORT_COPY1 , I am getting the run time job information and from there I am getting the spool id. Now I am converting the spool id to a PDF. This PDF should contain the output of the program ZPR022_INNCOMETAX_REPORT_COPY1. This output is normal output using Write statement only. But once the program is executed, I could find no data in the PDF file. When I check in SM37 and SP02, both the JOB and the SPOOL are created. What I feel is the program is not picking the spool id at the run time. Could any one help me in this regard how to proceed.
Please find the code below.
Program 1.
LOOP AT pernr.
CLEAR p_job.
p_stim = p_stim + 120.
CONCATENATE'ITSlip' pernr-low p_job sy-datum INTO p_job SEPARATED BY
space.
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname   = p_job
      sdlstrtdt = p_sdat
      sdlstrttm = p_stim
    IMPORTING
      jobcount = l_jobcount.
SUBMIT ZPR022_INNCOMETAX_REPORT_COPY1
    WITH pnptimr6 = 'X'
    WITH pnpbegda = period-low
    WITH pnpendda = period-high
    WITH pnppernr-low = pernr-low
    WITH pnpabkrs-low = 'IN'
       VIA JOB     p_job
        NUMBER l_jobcount
       TO SAP-SPOOL WITHOUT SPOOL DYNPRO
           SPOOL PARAMETERS ls_params
           WITH immediately = 'X'
          KEEP IN SPOOL = 'X'
              AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount = l_jobcount
      jobname   = p_job
      strtimmed = 'X'
     PRDMINS = 2.
      sdlstrtdt = p_sdat
      sdlstrttm = p_stim.
ENDLOOP.
Program 2.
IF sy-batch EQ 'X'.
    LOOP AT pnppernr.
      SELECT SINGLE * FROM pa0105
        WHERE pernr EQ pnppernr-low
          AND subty EQ '0010'
          AND endda EQ '99991231'.
      p_email1 = pa0105-usrid_long..
      PERFORM get_job_details.
      PERFORM obtain_spool_id.
      PERFORM convert_spool_to_pdf.
      PERFORM process_email.
     IF sy-sysid = c_dev.
        WAIT UP TO 5 SECONDS.
        SUBMIT rsconn01 WITH mode   = 'INT'
                        WITH output = 'X'
                        AND RETURN.
     ENDIF.
    ENDLOOP.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool'
            'request to be created.'.
   EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
ENDIF.
ENDFORM.                    " SEND_MAIL
*&      Form get_job_details
      text
--> p1        text
<-- p2        text
FORM get_job_details .
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
    IMPORTING
      eventid                 = gd_eventid
      eventparm               = gd_eventparm
      external_program_active = gd_external_program_active
      jobcount                = gd_jobcount
      jobname                 = gd_jobname
      stepcount               = gd_stepcount
    EXCEPTIONS
      no_runtime_info         = 1
      OTHERS                  = 2.
ENDFORM.                    " get_job_details
*&      Form obtain_spool_id
      text
--> p1        text
<-- p2        text
FORM obtain_spool_id .
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    MESSAGE s004(zdd) WITH gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.                    " obtain_spool_id
*&      Form convert_spool_to_pdf
      text
--> p1        text
<-- p2        text
FORM convert_spool_to_pdf .
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid              = gd_spool_nr
      no_dialog                = c_no
      dst_device               = c_device
    IMPORTING
      pdf_bytecount            = gd_bytecount
    TABLES
      pdf                      = it_pdf_output
    EXCEPTIONS
      err_no_abap_spooljob     = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_destdevice       = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11
      OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.                    " convert_spool_to_pdf
*&      Form process_email
      text
--> p1        text
<-- p2        text
FORM process_email .
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
ENDFORM.                    "process_email
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'IT Declaration'.
CONCATENATE 'ITSLIP' ' ' INTO gd_attachment_name.
it_mess_bod        = 'IT FORM for this month'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               TABLES it_mess_bod
                                      it_mess_att
                                USING p_email1
                                      'MindTree Payroll team'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             CHANGING gd_error
                                      gd_reciever.
ENDFORM.                    " process_email
*&      Form send_file_as_email_attachment
      text
     -->P_IT_MESS_BOD text
     -->P_IT_MESS_ATT text
     -->P_P_EMAIL text
     -->P_4422   text
     -->P_4423   text
     -->P_GD_ATTACHMENT_NAME text
     -->P_GD_ATTACHMENT_DESC text
     -->P_P_SENDER text
     -->P_GD_SENDER_TYPE text
     <--P_GD_ERROR text
     <--P_GD_RECIEVER text
FORM send_file_as_email_attachment TABLES it_message
                                          it_attach
                                    USING p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 CHANGING p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
          t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
          t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          w_cnt TYPE i,
          w_sent_all(1) TYPE c,
          w_doc_data LIKE sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = w_doc_data
      put_in_outbox              = 'X'
      sender_address             = ld_sender_address
      sender_address_type        = ld_sender_address_type
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = w_sent_all
    TABLES
      packing_list               = t_packing_list
      contents_bin               = t_attachment
      contents_txt               = t_attachment
     contents_txt               = it_message
      receivers                  = t_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.                    "send_file_as_email_attachment
Points will be rewarded.
Regards,
Balaji

Hi,
I think you are retrieving the spool before the entire spool is generated.
Put the following logic to retrieve spool iD
CHECK WHETHER STATUS OF JOB IS COMPLETED OR CANCELLED
WHILE 1 = 1.
GET THE JOB STEPLIST WHICH HAS THE SPOOL NUMBER
    CALL FUNCTION 'BP_JOB_READ'
      EXPORTING
        job_read_jobcount           = w_jobcount
        job_read_jobname            = w_jobname
        job_read_opcode             = '35'
JOB_STEP_NUMBER             =
     IMPORTING
       job_read_jobhead            = wa_jobhead
     TABLES
       job_read_steplist           = i_jobsteplist
CHANGING
RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
    IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
BEGIN OF INSERTION U179942 E1BK928781
IF STATUS OF JOB IS COMPLETED(F) OR CANCELLED(A)
READ THE JOBSTEPLIST & GET THE SPOOL NUMBER
    IF wa_jobhead-status = c_a OR wa_jobhead-status = c_f.
      READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
      CHECK wa_jobsteplist-listident <> space.
      w_spool_number = wa_jobsteplist-listident.
      EXIT.
    ENDIF.
ENDWHILE.
Best regards,
Prashant

Doesn't open the PDF file (i.e. articles, books pages). It appears a black page. Thanks for help

Safari doesn't open the PDF file (articles, book page, etc). It appears a black page. Before that it was working perfectly. Thank for your help

Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin (or anything Adobe related) in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

How to read the and Write the PDF file give me the solution

Hi all,
How to read the and Write the PDF file give me the solution
My coding is
import java.io.File;
import com.asprise.util.pdf.PDFImageWriter;
import com.asprise.util.pdf.PDFReader;
import java.io.*;
import java.io.FileOutputStream;
public class example {
// public example() {
     public static void main(String a[])
          try
          PDFReader reader = new PDFReader(new File("C:\\AsprisePDF-DevGuide.pdf"));
               reader.open(); // open the file.
               int pages = reader.getNumberOfPages();
               for(int i=0; i < pages; i++) {
               String text = reader.extractTextFromPage(i);
               System.out.println("Page " + i + ": " + text);
// perform other operations on pages.
PDFImageWriter writer = new PDFImageWriter(new FileOutputStream("c:\\new11.pdf"));
               writer.open();
               writer.addImage("C:\\sam.doc");
               writer.close();
               System.out.println("DONE.");
reader.close();
          catch(Exception e){System.out.println("error:"+e);
          e.printStackTrace();
I get the pdf content then it returns the string value but ther is no option to write the string to PDF, and we only add a image file to PDF,but i want to know how to wrote the string value to PDF file,
Please give response immtly
i am waiting for your reply.
thanks,
Suresh.G

I have some question flow
How library to use this code.
I try runing but have not libary.
Please send me it'library
Thank you very much!

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

You should be able to just place them in your Books library in iTunes and check to ensure that your Book library is configured to sync to your iPod when you sync your iPod to iTunes.

How can I move a pdf file from my pc to my ipad without overwriting all the pdf files in my ipad?

How can I move a single pdf file from my pc to my ipad without overwriting all the pdf files already in my ipad?

Email PDF to iPad.

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?
What do I need to do to bring the graphics and exhibits from the PDF file to the Word file?

Hi jackp52432917,
How was that PDF file created? Please see Will Adobe ExportPDF convert both text and form... | Adobe Community
It could be that the PDF file you're converting was created using a third-party application, and it doesn't contain all the information necessary to ensure a clean conversion. Have you had similar troubles converting other PDF files?
Best,
Sara

Error opening the PDF file while sending the PDF as an attachment

Hi All,
I am sending a PDF as an attachment in the mail. I am using the code pasted on 'Jul 28, 2006 8:59 AM' subject OTF Format of Purchase Order in email unreadable.
My problem is when I open the attachment in SOST or in the mail, I get the error message "Adobe could not open *.PDF because it is either not a supported file type or because the file type has been corrupted."
Please let me know if anybody has faced such an issue.
The code is found below.
FORM MAIL_OBJECT                                              *
      This routine receives OTF data. OTF data is converted to PDF
      format and send to the Partner's email address
FORM mail_object TABLES otf_data STRUCTURE itcoo .
DATA: pdf_size TYPE i,                             " PDF Size
        pdf_itab_size TYPE i,                        " Attachment size
        mailtxt_size TYPE i,                         " Text in mail size
        l_vbeln LIKE vbdka-vbeln.                    " Order Doc
DATA:
it_mailtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,    " Mail Text
it_pdf TYPE TABLE OF tline WITH HEADER LINE,           " OTF output
it_mailpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE, " Dist details
it_mailhead LIKE solisti1   OCCURS 1 WITH HEADER LINE," Header data
it_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,   " Rec List
it_pdfdata LIKE solix OCCURS 0 WITH HEADER LINE. " Attachment data
DATA: it_doc_att LIKE sodocchgi1.                 " Attri of new doc
DATA: BEGIN OF it_pdfout OCCURS 0,                " PDF in 255 length
           tline TYPE char255,
        END OF it_pdfout.
Sales doc and Customer
DATA: BEGIN OF i_vbeln OCCURS 0,
          vbeln LIKE vbpa-vbeln,       " Sales Document
          adrnr LIKE vbpa-adrnr,       " Customer
        END   OF i_vbeln.
Sender Address no and SMTP address
DATA: BEGIN OF i_addrs OCCURS 0,
          addrnumber LIKE adr6-smtp_addr,
          smtp_addr LIKE adr6-smtp_addr,
        END   OF i_addrs.
Convert OTF to PDF
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format       = 'PDF'
    IMPORTING
      bin_filesize = pdf_size
    TABLES
      otf          = otf_data
      lines        = it_pdf.
Make each line 255 characters
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
    TABLES
      content_in = it_pdf
      content_out = it_pdfout.
Create the PDF File
CLEAR it_pdfdata.
REFRESH it_pdfdata.
it_pdfdata[] = it_pdfout[].
LOOP AT it_pdfout.
    MOVE it_pdfout-tline TO it_pdfdata-line.
    APPEND it_pdfdata.
    CLEAR it_pdfdata.
ENDLOOP.
DESCRIBE TABLE it_pdfdata LINES pdf_itab_size.
Text in the mail.
it_mailtxt-line = 'ORDER ACKNOWLEDGEMENT'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--1'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--2' &
                    ' This is a test mail, Line Number--2'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--3' &
                    ' This is a test mail, Line Number--3' &
                    ' This is a test mail, Line Number--3'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--4' &
                    ' This is a test mail, Line Number--4' &
                    ' This is a test mail, Line Number--4' &
                    ' This is a test mail, Line Number--4'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5'.
APPEND it_mailtxt.
DESCRIBE TABLE it_mailtxt LINES mailtxt_size.
Document Number for Output
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
    EXPORTING
      input = vbdka-vbeln
    IMPORTING
      output = l_vbeln.
Attributes of new doc
CONCATENATE 'Order' space 'Acknowledgement' space l_vbeln
              INTO it_doc_att-obj_descr SEPARATED BY space.
it_doc_att-sensitivty = 'F'.
it_doc_att-doc_size   = mailtxt_size * 255.
Create Pack to text in mail body.
CLEAR it_mailpack-transf_bin.
it_mailpack-head_start   = 1.
it_mailpack-head_num     = 0.
it_mailpack-body_start   = 1.
it_mailpack-body_num     = mailtxt_size.
it_mailpack-doc_type     = 'RAW'.
APPEND it_mailpack.
Create Pack to PDF Attach.
it_mailpack-transf_bin   = 'X'.
it_mailpack-head_start   = 1.
it_mailpack-head_num     = 1.
it_mailpack-body_start   = 1.
it_mailpack-body_num     = pdf_itab_size.
it_mailpack-doc_type     = 'PDF'.
CONCATENATE l_vbeln '.pdf' INTO it_mailpack-obj_name.
CONCATENATE 'Order Ack' space l_vbeln INTO it_mailpack-obj_descr.
it_mailpack-doc_size     = pdf_itab_size * 255.
APPEND it_mailpack.
*Get email addresses based on Sales document.
SELECT vbeln adrnr INTO TABLE i_vbeln
         FROM vbpa
         WHERE vbeln = vbdka-vbeln AND
               parvw = nast-parvw.
IF NOT i_vbeln[] IS INITIAL.
    SELECT addrnumber smtp_addr INTO TABLE i_addrs
           FROM adr6 FOR ALL ENTRIES IN i_vbeln
           WHERE addrnumber = i_vbeln-adrnr AND
                 smtp_addr NE space.
ENDIF.
IF i_addrs[] IS NOT INITIAL.
    LOOP AT i_addrs.
      it_reclist-receiver   = i_addrs-smtp_addr.
      it_reclist-express    = 'X'.
      it_reclist-rec_type   = 'U'.
      it_reclist-notif_del = 'X'. " request delivery notification
      it_reclist-notif_ndel = 'X'. " request not delivered notification
      APPEND it_reclist.
      CLEAR: i_addrs.
    ENDLOOP.
ENDIF.
Call FM to send email
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = it_doc_att
      put_in_outbox              = 'X'
    TABLES
      packing_list               = it_mailpack
      object_header              = it_mailhead
      contents_txt               = it_mailtxt
      contents_hex               = it_pdfdata
      receivers                  = it_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorizationfiltered= 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " MAIL_OBJECT
Regards,
Ajith

Hi Ajith !!
Please refer this link :
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Here a spool output is converted into PDF and then sent as an email.
I think instead of using FM to change the width, try the logic mentioned in the link.
Also instead of FM CONVERT_TO_OTF use :
1. CONVERT_OTFSPOOLJOB_2_PDF
I hope this should solve the problem.
I had referred the same program from the link and it worked absolutely fine. Also check the adobe acrobat version, i guess old version doesnt support SAP, though not very sure.
Best regards,
Prashant

Can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF

can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF?

No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another.

Ever since I installed Safari 5.1 I can no longer access the pdf files on my website. I keep on getting an error with Webkit2webprocess.exe telling me that LogTransport2.dill was not found. Please help..

Ever since I installed Safari 5.1 on my PC (XP) I can no longer access the pdf files on my website. I have no problems with Chrome and Firefox. I keep on getting a message from WebKit2WebProcess.exe that the LogTransport2.dill was not found. (I HATE PCs...) I tried reinstalling Acrobat 9. I tried reinstalling Safari. I even tried an older version of Safari. Nothing Helped. Others have tried it on their machine, and it worked fine. But I do not know what is the matter with mine. I suspect the root cause is the missing LogTransport2.dill file. But I do not know how to go about getting it. Your help is truly appreciated. My website is http://www.hlmartworks.com.

I have also found the article that provides 3 solutions but none of the solutions worked.

Renaming the pdf files?

Similar Messages

Maybe you are looking for