Render all options: all options selected?

After reading the manual I got more confused...
I am exporting a self-contained QT. I want the best quality.
Before exporting, I want to render.
Am I 100% safe if I :
RENDER ALL > Select all the options (all the colors, even the ones I don`t need!) > RENDER ALL both video and audio ?
Should I select the whole sequence in the time line ?
Thanks a lot.

It will not hurt to have all the colors selected (even unlimited) before rendering.
Whether that will speed up the export, I don't believe it will.
Exporting to QT, the render does not matter. If it is not rendered it will be. Even if you are not selecting recompress each frame.
The unlimited option (or orange) is the one I generally turn off, because we do a lot of HDV. Unlimited tries to conform it to HDV when I don't need it to. So the option just above (Full) will suffice.
I would recommend you render all with all options except unlimited before exporting.
When it comes to selecting. I would recommend having ALL selected (Command+A) or none at all (ShiftCommandA). Make sure you don't have one video selected and also make sure you have the timeline selected, otherwise it might export the item in your viewer.
That's my advice. Hope it helps

Similar Messages

When is there going to be a select all/delete all option in email? I need to search for certain emails and delet them from my phone but not my email program (Outlook)

when will there be a select all/delete all option in Emails? I have a large number of emails that come to my phone which i dont want to delete from my outlook mail account (On my PC). However, i want to be able to search, select all and delete these emails from my phone? I do not use ICloud either as it causes issues with my calendars at work.
These features should be a standard as there are plenty of other users out there that are trying to do the same thing and as yet there has been no progress? The email on the iphone is one of the biggest downfalls of the phone, blackberry and android handle them much better, but i dont have an option with my phone at work. Please help??

No one here would have any idea when or if such a feature would be introduced until and unless Apple announces it.

Ssrs 2008 'select all' option to be selected for a parameter

In a new ssrs 2008 report, the problem is all reports are not selected from the parameter called 'report' when the report runs automatically. When the report executes, there is nothing displayed in the parameter selection dropdown box. The user
has to click the down arrow to select which reports they want to execute.
Here is the siutation for the ssrs 2008 report:
In a new SSRS 2008 report, I want to be able to allow the user to select which report they would like to see generated by selecting the report name from a dropdown list. This is a multi-valued parameter and the parameter name is called 'report'. I
would like the default value to be for all 5 reports to be selected.
All 5 reports will be on the 'main' report. There will be no subreports. Each report will have its own unique matrix and the matrix will be visibile based upon what is selected in the parameter called 'report'.
My question is how can I make the 'default' value for the parameter called 'report' have all the reports selected?
Normally to get all multivalued parameter values selected you create a dataset and run a query against a table. However in this case, there is no table to query. The user just selects what report(s) they want executed.
Here is the code that is used:
1.Right-click the multiple parameter ‘repot’ to open the Properties dialog box.
2.Specify the values below in the Available values:
Label: report1
Value: report1
Label: report2
Value: report2
Label: report3
Value: report3
Label: report4
Value: report4
Label: report5
Value: report5
3.Specify the values below as the Default Values:
report1   report2   report3   report4   report5
4.Right-click the ‘report1’ to open the Tablix Properties dialog box.
5.Select Visibility in the left pane, type the expression below in the “Show or hide based on an expression” textbox:
=iif(InStr(join(Parameters!report.Value,","),"report1")>0,false,true)
6.Use the expressions below to control the visibility of the ‘report2’, ‘report3’, ‘report4’, ’report5’:
=iif(InStr(join(Parameters!report.Value,","),"report2")>0,false,true)
=iif(InStr(join(Parameters!report.Value,","),"report3")>0,false,true)
=iif(InStr(join(Parameters!report.Value,","),"report4")>0,false,true)
=iif(InStr(join(Parameters!report.Value,","),"report5")>0,false,true)
Thus can you tell me how all values from the 'report' parameter can be selected automatically when the ssrs report is executed?

Pass default value as below and see
=Split("Report1,Report2,Report3,Report4,Report5",",")
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

HP Photosmart 3210 installed on my iMac But is showing as but is showing as HP Color Laserjet 2800 series PS which means I no longer have access to all the paper options especially the photo tray

I have recently purchased an iMac running Lion. The HP Photosmart 3210 printer was connected through the network and I was happy that it recognised the printer - good old Mac's!!
However, when I tried to print some of my photos from the photo tray, the option was not available and when I looked at the printer properties, it was showing as a HP Color LaserJet 2800 Series PS which does not have all the paper options I had before. Reinstalling the software from HP did not make any difference - do I now have to buy a new printer as well???

I suggest opening the Print & Scan System Preferences, then highlight your HP Photosmart printer in the printers list and delete it by pressing the minus sign. Now, re-add the printer by clicking on the plus sign and select the printer. Make sure that the 'Print Using:' pull down aut selects the correct driver for your printer. If it doesn't, pull down the list and manually select the correct driver using the 'Select Printer Software' option. Hopefully that will resolve your issue.
HP Printer Support for Mac OS X

Hello, I have a question regarding the sharing/exporting on imovie. Whenever I click the share button all the normal options pop up, but when I actually click where I want to share it to nothing happens. If you know what's wrong please let me know.

Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6.

/*line 957 error */
     public void select()
          for (count = 0; count <= p; count ++ )
               if(P[count] != null){ /* validation */
               m = (int)(P[count].getX());
               n = (int)(P[count].getY());
               if (Math.pow(-1, m + n) == 1)
                    piece[m][n].setBackground(wselect);
               else
                    piece[m][n].setBackground(bselect);
          step = 2;
     }

No datasources in SPM after all refresh datasources option

Hi,
I tried Refresh all data sources option in SPM, checking the log it showed that the Metadata loaded message. But post that, I could not see any data sources in User preferences or datasource Administration. But I could the list in Application properties.
This is a crtical issue as till this is resolved no reports are displayed.
Regards,
Sampat Desai

Hi Sampat,
We have seen this error in the case when some user is saving reports at the same time when refresh datasource is being done. Please try following steps which should most likely resolve this issue:
    1) Delete all nodes under the folder "/application/metadata" using the methods OPM_PS_GET_NODE_METADATA and OPM_PS_REMOVE_NODE(Please note that /application/metadata itself should not be deleted)
    2) Go to table "OPM_PS_ITEM_DET" and search for all objects with "NODE_TYPE" as "AUI_METADATA_CACHE". This will return all the nodes which are dangling as there should be no such value.
    3) Retrieve the GUIDs from step 2 and remove the existing nodes using the FM OPM_PS_REMOVE_NODE
Thanks,
Divyesh

All "timeline" menu options are greyed out in my copy of

All "timeline" menu options appear greyed out in my version of Dreamweaver 8. I've tried deleting the cache file and the configuration folder, but without success. There was originaslly some reference to a Javascript error message reference timeline(), since when I've ensured my Java was updated. Any ideas please?

For some reason, the Link > Framemaker document option was also greyed out when I created the project. I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11. Then I created the project and was able to find and open the .xpj file. Like I said, I found then that the Link > Framemaker document option was greyed out and could only import the FM book.
I recreated another project and see that the Link > Framemaker document option is greyed out. I can only use Link > Word document, which is of no use to me. Any suggestions would be welcome!

I want to 'deauthorize all computers'. Apple web says to go to Account Information and click deauthorize all, but the option is not there. where can i do this?

I want to 'deauthorize all computers'. the Apple web says to go to Account Information and click deauthorize all, but that option is not available on the screen. How else to I get to the deauthorize all computers.

See Here
Authorise / Deaurhorise About
http://support.apple.com/kb/HT1420
Login to iTunes, go to "view your account info" on the itunes store, deauhtorise all five, and then re-authorize your current Computers one at a time.

My 3D is not working in Photoshop CS5. All of the options are greyed out

Hi,
I just installed the photoshop CS5 but find out my 3D is not working, all of the options are greyed out. I have checked on the openGL menu in preference but still not work. I have core i7 and intel HD graphics 3000 with up to 1760MB dynamic video memory. please help

Is the active document RGB?
Could you please post a screenshot with the pertinent Panels/Menus visible?

When I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

Rid of "Show All Menu Items" option

How to get rid of "Show All Menu Items" option from Application menu and keep always open all menu items?

You should be able to reset Your menus under Edit > Menus by choosing Set: Basic.

HT204074 Is "Deauthorize All" my only option for Computer Authorizations?

According to the support pages I have read, I should be able to "Manage Devices" on the Account Information page. But I only have "Deauthorize All" as an option. I'm I missing something? I'm I not looking in the right place? Is "Deauthorize All" my only option for Computer Authorizations?

I have two lines, one on AT&T and one on Verizon.
On AT&T, 450 minutes, 200SMS (200SMS is no longer offered) and unlimited data for $80.40 after taxes.
On Verizon, I have 450 minutes, 1000SMS and 2GB Data for $86.
There are pay as you go retailers out there such as Cricket but you will pay full price for the phone but less per month to use it.

HT4085 Did all of these options as instructed. Screen still doesn't rotate and remains stuck in portrait view

Did all of these options as instructed. Screen still doesn't rotate and remains stuck in portrait view. Help?

Not sure what you've already tried. Have you locked it using the Side Switch then accidentally changed the side switch to permit Muting/Unmuting?
Settings > General > Use Side Switch to: Lock Rotation (make sure check box is here).
Then try sliding the side switch. Also try turning off the device by holding the power and home buttons, then sliding the red slider to the right (then repower).

Where the **** are all my export options now in Quicktime X

Don't tell me you actually removed all the pro options I had from WMV to FLASH to on2 to H264 and only gave us like 2 options to export? Where are the custom settings, the screen sizes, frame rates etc.
Is this a joke or am I missing something? I am stuck now at work with an updates OS and now way to export movies to the formats and sizes I need. What is going on? I paid for a quicktime pro licence since quicktime had one.

I guess this is not a joke here is the help file:
+To convert a movie to another format:+
+Choose File > Save As.+
+In the dialog that appears, enter a filename for the exported movie and choose a location for the file.+
+Choose an option from the File Format menu.+
+iPhone or iPhone Cellular: Creates a movie that is optimized for viewing on iPhone, iPod touch, Apple TV, and desktop computers.+
+Apple TV: Creates a movie that is optimized for viewing on Apple TV and desktop computers.+
+Computers: Creates a larger size movie for desktop computers and Apple TV.+
+Movie: Saves a copy of the movie with a new filename but does not change the format of the movie.+
+Click Save.+
So great, again where are all my export custom options I paid for. I got some deadlines now and I am totally screwed up. Great...awesome to know that you crippled Quicktime x and to learn about it AFTER an install. Great job there.

Change the Show View Options' "All windows" default to "This window only"?

By default, all Show View Options panes are set to "All windows". Is it possible to change the default to "This window only"?
I regularly change icon sizes for various folders, but never for all windows. So every time that I use the Show View Options pane, it's an annoying "click This window only" process.
screen capture of Show View Options pane
http://aycu01.webshots.com/image/11080/2003481958008021751_rs.jpg
17" iMac G4, 1GHz PowerPC, 768mb RAM Mac OS X (10.4.9)

The default is for any window you have not previously opened and set to have All Windows as the default, for List and Icon Views. Once you click This Window Only and make your settings, then every time you open that particular folder it should remain at the This Window setting.
I find the default of All Windows really really annoying, but I am aware of no way to change this. Send Feedback to Apple:
http://www.apple.com/macosx/feedback/
It should be a user settable global preference, but it isn't.
Francine
Francine
Schwieder

Render all options: all options selected?

Similar Messages

Maybe you are looking for