Render and Replace Different Format In Same Sequence

Is there any way to keep the Interpret Footage settings after make Render and Replace option?
I have a sequence setting in 1080 50p with two different formats 50p 720 (interpret in 25p) / 1080 25p, I did a render and replace of the total. And the result was that the rendered footage doesn´t respect me the interpret settings.
Thanks.

Render and Replace is currently designed to transcode the clip and keep the Interpret Footage settings applied to the clip (not burned/rendered in). There is a feature request to burn/render in Interpret Footage (and other effects) to the transcoded clip.
Not ideal, but a possible workaround would be to export the clips with "Import into project" selected in Export Settings, then Replace with Clip to get your desired outcome.

Similar Messages

Where did "Render and Replace" in Premiere Elements 13 go?

Hi,
I read in a post from 2008 that said an easy way to export a .WAV file from a single Clip so that you could edit it in another program could be done using "Render and Replace". They suggested: Clip -> Audio Options -> Render and Replace. But my only option in that menu is "Audio Gain...".
This is incredibly frustrating. I sincerely hope I didn't waste my money on a purposely crippled version of Elements that took features away from older versions of the same software.
Any help would be greatly appreciated.

smu johnson
Thanks for the reply.
I think that I have good news for you.
From what you wrote, you have a clip on the Timeline with video and audio components. For the moment we will assume that you have just
that clip on the Timeline.
Go to Publish+Share/Computer/Audio and set Presets = Windows Waveform. That will export just the audio as a .wav file to the computer
hard drive space of your choice. You can re-import the .wav version into your project with the program's Add Media/Files and Folders.
If you had a bunch of clips on the Timeline and wanted to get a wav version of the audio from a particular file....the position the gray tabs of
the Work Area Bar to span just the area of that particular clip and then Publish+Share/Computer/Audio with Presets = Windows Waveform
BUT you need a check mark next to "Share Work Area Bar Only" in the export settings.
Supplemental information if you have a Timeline with more than one clip on it....
Work Area Bar Gray Tab Placement
Shortcuts are the easiest way to place those gray tabs to span the area of the segment for export.
Move the Timeline Indicator to the start of the segment and, as you hold down the Alt key of the computer
main keyboard, press the left bracket key [ Move the Timeline Indicator to the end of the segment and, as
you hold down the Alt key of the computer main keyboard, press the right bracket key ]
And do not forget the other requirement for this situation with more than one clip on the Timeline....in the
export area, check mark next to Share Work Area Bar Only.
Please give it a try and let us know the results when you have time.
Thanks.
ATR
Add On....There is an Adobe Feature Request Bug Report Form which you could file. But you are not likely
to get an individual reply. If any change, you might see it in the next version which you would purchase.
Adobe - Feature Request/Bug Report Form

Render and Replace Audio

I've got a whole stack of individual audio clips all on the same audio line/channel on the timeline which I now need to - Clip > Audio Options > Render And Replace. Can I apply render and replace to all the audio clips on the specific audio line at the one time. This would save me some time. I only need assistance, if you want to dribble on or bless me with a superior complex, save yourself the time and go write on some one else's thread.

D'oh,
Figured it myself! 5 minutes later - To select multiple clips by clicking, use the Selection tool and Shift‑click each clip you want to select. Then it's Clip > Audio Options > Render And Replace.

"Render and replace" now converts to .mov, not audio wav files like before

In previous versions, the "render and replace" functionality allowed you to quickly extract audio from clips and turn them into audio files. Now in CC 2014 the audio gets replaced with another movie file with no video track. This is useless when trying to convert audio clips to .wav format for editing in 3rd party audio apps, which is what made it so great in the first place. Additionally this breaks functionality with PluralEyes, which required that you rendered and replaced segmented video clips like those from the C300. Now PluralEyes rejects the created .mov files with an "unsupported format" error.
Why was this changed? How do I change it back?

I too am now dipping my toes into Premiere Pro CC 2014 and just ran into this as well. Jeez!!!! Using Pluraleyes like you and just need to convert the audio portions to .mov audio. Now what????? I thought there might be 'presets' that were downloadable but I can't easily locate any. Why does Adobe do these things?

Render and Replace doesn't open Soundbooth

Mac / PP CS4 (production premium)
Hi, I have a clip in the timeline and I'm right-clicking, choosing Edit in Adobe Soundbooth > Render and Replace but nothing happens.... Soundbooth doesn't open (at all) with the clip to edit. Any suggestion appreciated!
Thanks
-Scott

Thanks for the input...
I tried Edit Orginal (video and audio .mov file) on the file in the bin...
that opens Quicktime Player. I went into Sys Prefs, QT, and tried changing
file associations, etc.
This file I'm trying this with was recorded using OnLocation as a QT . mov
file. That's the one association I can't disable in QT which may be why
I can't open SB but not sure since nothing opens (including QT) when
trying Render and Replace
When I try Edit in Soundbooth/Extract Audio on the file in the bin, that
works as expected, creating the extracted audio files, seen in the PP bin,
and then SB opens with both files ready to be worked on.
Thanks,
-Scott
Scott Babcock
Multimedia Director
Putman Media, Inc.
630-467-1301 ext 479
[email protected]
Twitter: @scottbabcock
LinkedIn: http://www.linkedin.com/in/sbabcock
the_wine_snob <[email protected]>
04/09/09 08:08 PM
Please respond to
[email protected]
To
Scott Babcock <[email protected]>
cc
Subject
New message: "Render and Replace doesn't open
Soundbooth"
putmanmedia,
A new message was posted in the thread "Render and Replace doesn't open
Soundbooth":
http://forums.adobe.com/message/1881993#1881993
Author : the_wine_snob
Email : [email protected]
Profile : http://forums.adobe.com/people/the_wine_snob
Message:

From Premiere - Render and Replace ??

I use Soundbooth to modify my audio track from the timeline. When I'm in Soundbooth I save and return to AP but I can not here the change. Is there something I am doing wrong ? ?

is this just a single clip, or you have the entire 18min loaded in AE as comp? does this happen with new projects and all footage or just some? can you render and replace regular clips that aren't AE comps? if its just a few clips of the 18min project, can you render previews in premiere? if its just a few clips, could also render them out in AE and swap them out in premiere instead of using render and replace... or maybe temporarily disable the ae effects/layers while editing in premiere and then turn them back on when ready to export final render.

My video won't "Render and Replace" in Premiere Pro from linked footage in After Effects

I am using Premiere Pro CC 2014 and After Effects CC 2014. I can't get the video to "Render and Replace" in Premiere Pro after editing the original in After Effects. It just freezes on "Analyzing."
In order to see the footage in real time I have to export it to an mp4 then replace the linked footage. The footage is 18 minutes long and it takes more than 5 hours to export it. After I edit the exported version, I have to export it again, which is another 5 hours. This is taking a really long time. I would rather edit the "Rendered" version What am I doing wrong?
Russell

is this just a single clip, or you have the entire 18min loaded in AE as comp? does this happen with new projects and all footage or just some? can you render and replace regular clips that aren't AE comps? if its just a few clips of the 18min project, can you render previews in premiere? if its just a few clips, could also render them out in AE and swap them out in premiere instead of using render and replace... or maybe temporarily disable the ae effects/layers while editing in premiere and then turn them back on when ready to export final render.

CS5 Mixed video formats in same sequence

New user here, coming from 10 years of Pinnacle Studio.
I have at least 3 different video formats to edit in a single sequence/timeline (iPhone, 720 from a Sony point and shoot, and 1080i from a Canon video camera). Depending on which format I use for the sequence, when I drag the videos to the main Video1 track, the audio will go to whatever track is appropriate for the mono or stereo. The iPhone and Sony are both mono and will be on one track and the Canon is stereo so its audio jumps to a stereo track.
So my question is, am I to make all my audio adjustments on both mono and stereo audio tracks depending on where I am making the volume changes on the timeline. In Pinnacle, the video and associated audio was always on the same track pair. I was just wondering about workflow and the best way to make the audio adjustments.
My project typically is a year's worth of video footage from the 3 sources, making a Year In Review. There will be soundtrack music from MP3's playing most of the time, with occasional original audio from the video being raised in volume for a few seconds, then fading back down to hear the soundtrack again. Keeps the audience more engaged.
One more question, what format should my sequence match, the 1080 stereo Canon, 720 mono Sony, or mono iPhone. The end result will be for viewing on widescreen big screen DVD or Blu-ray. I would like to make the mono on both channels, and upscale to 1080. Not sure the best way to do this.
Any guidance will be greatly appreciated.
Thank you.

Thanks everyone. I will continue practicing and learning.
Another question. After editing, I will be authoring with Encore, which I have used for many years now. How should I structure the audio tracks in Premiere if I want the mixed audio track (master track) to be the main audio track in Encore (on the DVD) and the original video's audio to be the alternate audio track in Encore (on the DVD). While playing back the DVD, the default audio track will be the mixed audio. If the viewer wants to hear the original audio only, then they just hit the audio button on the remote to switch tracks.
Funny how this requirement came about. For years I always just had the mixed audio. But while watching the videos, my kids started telling me they wanted to hear the original audio. Knowing the video would be too boring to adults without a soundtrack, I came up with the idea for multiple audio tracks. That requirement eliminated the consumer lever authoring tools, which is what pushed me to Encore back in the version 1.0 days. Since then I have been using Studio to edit, and Encore to author. Now I am trying to dump Studio and use the Premiere/Encore pair.
The way I did this in Pinnacle Studio was to output the video and mixed audio as an AVI or MPEG2 file, and import this as the timeline in Encore. Then from Pinnacle Studio, output the original audio only as a .wav file, and import this as a 2nd audio track in Encore. Worked perfectly...as long as Pinnacle kept the audio in sync, which at times was difficult, but with the newer releases of Studio, it worked much better.
Thanks for all the guidance.

Compare files in different formats but same order

Java Developers,
I have a serious problem here "Comparing two files"... in Java.
We recieve 2 emails which talk about the same thing but not in the same format. one comes from my company and the other email comes from partner company. These 2 companies have their own standards and their own codes. so their emails do not match exactly.
I should check whether the contents of these 2 files are same or not. Line by Line they r not at all same, entirely different formats as I mentioned earlier. but somewhere in between there will be same headers for eg: "Service Details" section . once u see that word in both the files then compare the fields under that section, check whether they r same or not. here also the fields are not the same, one says AB and another says '12' , I shud check whether they mean the same thing or not. We have a dictionary and a table which says AB ='12', Everyday we get around 200 sets of such matching emails. how to read them, how to process them and how to see whether they match or not.

Also look at the java.util.regex package.
Beyond that, "How do I write a program that does <complex requirements statement>?" is not an appropriate question for these forums. If you're totally stuck and don't know where to begin on that, then you're probably not qualified to do it. That's not intended as an insult, just a reality check.

Search and replace string formatting

Hi,
I am trying to do a search and replace formatting of a string.
In the example I am looking for string "PASSED" but it must also start with usbflash and some number + PASSED.
I can't get the format to have a number from 1-99. The number of replacements should add up to 6 in this case. I have tried with \d for any number, and I also tried [1-99].
Solved!
Go to Solution.

Right click on the Search And Replace String function. There is an option to use Regular Expressions. Then give this a try.
EDIT: You will need to set the Replace All input to TRUE.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Match Pattern.png ‏12 KB

Inconsistent behavior in TestStand and TestStand UI for the same sequence file

Solved!
Go to Solution.

I tried both the TopLevelVI and testexec.exe; but both of them were giving the same error. I never tried any other UI than Labview.
Because the same sequence was working without any issue on some other system, I uninstalled and reinstalled TestStand 4.0 and same sequence is now working fine, in TestStand, testexec.exe, TopLevelVI – basically everywhere. I am not sure what was wrong with TestStand in my system, but definitely something wasn’t correct.
Thank you for all the responses.
Vidula
Message Edited by Vidula S. on 08-26-2009 10:28 AM

How to load and replace random swfs into same loader on stage?

Hi...this is very simple, but, for some reason escapes me: using AS3 how can a swf load another swf to replace itself in the same loader on the stage, while simultaneously calling a randomizing function in the first frame of the main timeline, to randomize the next swf?
At the end of each swf (called "koan_#.swf") there is the following old AS2 code...it was used to randomly select and then play a swf from koan array:
_root.index++
if(_root.index>_root.koan.length-1){
_root.index=0;
_root.koan.shuffle();
_root.koan_loader_mc.loadMovie(_root.koan[_root.index]);
This code on the first frame of the main timeline loads a random koan swf properly, but, after the koan plays I would like to load a new random koan swf.
function shuffle(a:Array):Array {
var len:Number = a.length-1;
for (var ivar:Number = len; ivar>=0; ivar--) {
var p:Number = Math.floor(Math.random()*(ivar+1));
var t = a[ivar];
a[ivar] = a[p];
a[p] = t;
return a;
var index:uint = 0;
var koan_loader:Loader = new Loader();
var koan:Array =["swfs/koans/koan_1.swf","swfs/koans/koan_2.swf", "swfs/koans/koan_3.swf", "swfs/koans/koan_4.swf", "swfs/koans/koan_5.swf", "swfs/koans/koan_6.swf", "swfs/koans/koan_7.swf", "swfs/koans/koan_8.swf", "swfs/koans/koan_9.swf", "swfs/koans/koan_10.swf", "swfs/koans/koan_11.swf", "swfs/koans/koan_12.swf"];
koan = shuffle(koan);
koan_loader.load(new URLRequest(koan[index]));
MovieClip(this).koan_loader_mc.addChild(koan_loader);
Thank you very much. I've tried multiple variations of updated AS2 code but am at my wits end.

Alright, the bloody forums won't attach the file for some reason, so here is the code:
Copy and paste this code into a text file and save it as InterfaceEvent.as
package {
     import flash.events.Event;
     public class InterfaceEvent extends Event {
          public static const KOAN_FINISHED:String = "koanFinished";
          public function InterfaceEvent(type:String, bubbles:Boolean = false, cancelable:Boolean = false, index:int = -1, item:Object = null) {
               super(type, bubbles, cancelable);
               this.index = index;
               this.item = item;
          public var index:int = -1;
          public var item:Object = null;
          override public function clone():Event {
               return new InterfaceEvent(this.type, this.bubbles, this.cancelable, this.index, this.item);

Mixing "letterboxed" and "squeezed" footage in the same sequence

This is a good one. All footage shot on a DVX100, which has 2 ways of getting widescreen: squeeze and letterbox.
We shot 2 tapes worth of footage three weeks ago using squeeze for widescreen. I have since made a rough cut of all that footage.
Today, we shot the remaining scenes, but they were shot letterbox for widescreen (due to a communication errore between myself and the DP).
We discovered this halfway through shooting today, and decided to keep shooting letterbox because it will be easier to convert the squeezed footage to letterbox than vice versa.
Oh, and the squeezed footage is all outdoors, the letterboxed all indoors, so matching isn't an issue.
My question(s) is (are):
How would you deal with this (reshoots are out of the question)?
Is there a simple way to convert the footage I've already edited without losing the edits?
Is there a magical fix that will fix it without any effort on my part? (just kidding about that last one)
Thanks!
Jason
G5 Mac OS X (10.4.2)

Thanks for the tips!
What is your final output hoping to be? Do you need
anamorphic enhancement? (ie. you're outputting to
DVD, or for display on a 16:9 monitor, or for film)
It will be on DVD ultimately, but projected digitally for the premiere and possibly sent to festivals. It just needs to be widescreen, enhanced or not.
I take it your existing sequence is 16:9?
Yes.
If so...
1. Open a new 4:3 sequence in the timeline.
2. Drag your existing 16:9 sequence into the 4:3
sequence but don't let go of the mouse
3. Press and hold the Command key, then release the
mouse.
4. The contents of your 16:9 sequence should
now be inserted (as letterboxed clips) into the 4:3
sequence
I'll try this when I get home.
Or, when you meant 'convert the footage,' where you
talking about the source files?
If it's as easy as those steps, great! However, the two formats need to output to DVD together. I assume this will simply add more render time to that end?
I don't care about the source files if I can ultimately output it harmoniously.
Thanks again!
Jason
G5 Mac OS X (10.4.2)

Can i make (for example) 3 partitions on my external Hard Drive, and make different formatations for each, so i can share files of one of them in a pc and mac?

Hello ...
My name is Rui, i'm from Portugal ... (so please be patiente with my english, it can get a bit confusing)
so... first of all ... i have to say ... i'm still a pc user ... i don't have a Mac ... yet ... they are sold out right now in the shops near me ... i am waitting for them to arrive so i can pick up mine ... (i wish in a couple of days i will be entering the Mac world ....) ... i'll be picking the "entery" iMac model, the 21,5'', i5 with 500gb hard disk ... well .. i know it's the cheapest one (i hope it is a good machine tho) ... but it's my entering Mac world too (my only apple products till know were the ipod ...) ... one of my concerns are being the 500gb hard drive ... that for my pc experience is a little bit short ... that makes me a little scared (but paying 300e for the next model to have a 1tb disk, it's not a good option for me right now) ...
so..
I've been reading a lot about iMac's ans OS X so i can get familiar with this all new world ...
and i couldn't get any answer for some of my doubts... so i decided to ask you Mac Users ..
My idea is to have an external HD to store files (and not to fill the 500gb of the iMac) ... and i am wondering if it would be possible to make this ...
- make three partitions on the external Hard Drive and
- the first be formatted in Mac OS extended (journaled) mode
- the second on fat 32 - so i can store and share files with a mac or pc
- third be reserved for Time Machine
i wonder would that be possible... or would make sort of incompabilities ... would it work all well ?
hummm ...
I hope someone can help me with this ...
... if it is a silly question ... sorry ... but please remember, i've never had a Mac computer (i'm waiting for my 1st iMac to be available on store) ... so a lot of things are "flying" in my head right now ...
... and of course .. sorry for my english ... i hope you all understood me ...
thanks (obrigado) a lot for your patience...
Rui from Portugal

Hi! Dwagner, once again ...
I've just got my Mac last friday ... i'm still getting amazed with this new world to me ... eehe .. quite different ... but
... "i can do it, i can do it" eheeh
i'm in that period that a new question appears at almost every mouse click ... lol
so ... can you help me (once again) ..
you said you had your hard drive with this settings...
"You can partition for OSX (extended Journal) - read/write by only OSX or read only by Windows via BootCamp
You can partition for Windows (NTFS) - readable by only Windows
OR - you can format with ex-FAT and this is read/write capable for both operating systems."
how did you formated the partition in NTFS ? ... on the mac? using the "disk utility" ? or did you use another program to do so ...?
i hope i'm not "bugging" you ... this might be a silly question for most of people ... but right now ... it's a major question for me ... ehehe
once again Obrigado (Thank You)
Rui from Portugal

Acrobat DC and XI different Output preview; same setting on the same machine

Hello,
I've got an question regarding Output preview
My sample PDF does have different output preview values on Acrobat DC (100% Black) and Acrobat XI (CMYK values)
Both use the same setting (Euroscale Coated v2), doc has no PDF/X output intent
Still..... it's strange that on one Mac the PDF does look different....
What's going wrong?
Kind regards

Numerous fixes went into color display on MacOS for Acrobat DC as well as in Output Preview in general. That having been said, I don't recall any changes that would have resulted in the phenomena you are seeing.
I assume you were clicking on the “black” circle to get you sample color values? And what do you believe should be the correct values? CMYK=(0,0,0,1) or CMYK=(0.8,0.64,0.67,0.75)?
If you can post a copy of this file, we can examine it to see what is going on.
- Dov

Render and Replace Different Format In Same Sequence

Similar Messages

Maybe you are looking for